PyCharm 2016.2.3, Mac OS X 10.11.1, Python 3.5 (Homebrew);
I have this folder structure
project
/somepackage
/subpackage
__init__.py
bar.py
__init__.py
foo.py
foo.py:
import somepackage.subpackage.bar
print("foo")
bar.py:
print("bar")
So my expected output is
bar
foo
This works fine when run from PyCharm. However, when I run it from my terminal I get an ImportError:
$ pwd
$ /home/project (not the actual path; just omitting some personal stuff)
$ python3.5 somepackage/foo.py
File "foo.py", line 1, in <module>
import somepackage.subpackage.bar
ImportError: No module named 'somepackage'
I have found this question, which is about the same problem. However, none of the suggested solutions work for me, as I am indeed using the same Python interpreter as PyCharm does and I am currently in the folder that contains the /somepackage folder.
Does anyone have any other suggestions about how to solve this issue?
You are running foo.py like a script, but you are really using it like a module. So the proper solution is to run it as a module:
python3 -m somepackage.foo
For the record, another alternative is to edit your path like:
export PYTHONPATH=.
(Or you could put the absolute directory in there, and of course you should append any other directories that are already in your PYTHONPATH.) This is closer to what PyCharm does, but is less philosophically correct.
Setting PYTHONPATH is what makes it work, as noted above. I use the following VSCODE .env content so that it works for any project:
PYTHONPATH=${PROJ_DIR}:${PYTHONPATH}
This is essentially what PyCharm does when you check "Add Content Roots to PYTHONPATH" in your run/debug configuration. It's a helpful setting, but it spoils you because your code fails outside PyCharm.
Or, if you run in terminal, first export:
export PYTHONPATH=...
Took me days to work all this out.
i solved my problem by two steps on Linux:
first step
go to the root directory of your project and set:
export PYTHONPATH=$PATHONPATH:`pwd`
second step
run python3 -m somepackage.foo
remember Without '.py' suffix
I just had the same problem using scapy.layers.http Module,
this problem occurred on my Kali (linux-Debian) but run fine on Win-10 (after few modifications.)
packet was installed (scapy-http) correctly and the program was running in PyCharm but not as script (from terminal)
I tried solving it with reinstalling in main root, and messing with the sys.path but None have worked.
Troubleshoot & Solution
I found that it looks for the http module in:
/usr/local/lib/python3.7/dist-packages/scapy/layers/init.py
and got the ImportError:
from scapy.layers import http --->
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: cannot import name 'http' from 'scapy.layers' (/usr/local/lib/python3.7/dist-packages/scapy/layers/__init__.py)
So then I checked where scapy-http is really installed, which is module called http.py, so I just copied it to:
/usr/local/lib/python3.7/dist-packages/scapy/layers/
found the http.py file in :/usr/local/lib/python3.7/dist-packages/scapy_http/
And that did it :)!
I know its a bit glitchie but that worked!
Related
I know there has been similar problems, but unfortunately most of them are related to errors with pyperclip itself instead of the batch file, which i suspect is where the problem stems from.
Below is an MRE of my Python script:
#! python3 -> Do I have to use my version(3.8)?
# pw.py - An insecure password locker program.
import sys, pyperclip
#do something with the module
And my batch file pw.bat:
#py.exe C:\Users\KEVIN\PycharmProjects\atbs_exercise\pw.py %*
#pause
I am running python 3.8 on windows 10. I imported the pyperclip module in my python script pw.py and ran the file via pw.bat, and this in turn gives me this error:
Traceback (most recent call last):
File "C:\Users\KEVIN\PycharmProjects\atbs_exercise\pw.py", line 7, in <module>
import sys, pyperclip
ModuleNotFoundError: No module named 'pyperclip'
Press any key to continue . . .
Which shouldn't happen as I have installed pyperclip on the project using pip, and the script itself runs just fine in pycharm. What am I missing?
EDIT: I forgot to mention that I am using pycharm. So the thing is that pycharm had also installed python.exe in the project folder. And as the module pyperclip is only installed to that folder, the python.exe used in the bat must point to the one in the project folder.
i don't know why are you using py.exe. when running commands from a batch file or cmd .you should use python.exe.obviously you would need to add python to add for doing so.instead of adding py.exe to path,add python in system variable Path which is somewhere present in C:\Users\[username]\AppData\Local\Programs\Python\(your path might be diffrernt).you can add python in Path by following this post
after adding python to path just use the following batch-file:
#echo off
python path-to-your-py-file\filename.py
This is a very basic question on how to code in python and run your script from a very beginner.
I'm writing a script using Xcode9.4.1 which is supposed to be for python3.6. I then have an sh script run.sh, in the same folder of the script (say "my_folder") which simply looks like
python my_script.py
The python script looks like
from tick.base import TimeFunction
import numpy as np
import matplotlib.pyplot as plt
v = np.arange(0., 10., 1.)
f_v = v + 1
u = TimeFunction((v, f_v))
plt.plot(v, u.value(v))
print('donne!\n')
But as I try to run my_script.sh from the terminal I get a "ImportError: No module named tick.base" error.
But the tick folder is actually present in "my_computer/anaconda3/lib/python3.6/site-packages" and up to last week I was using Spyder from anaconda navigator and everything was correctly working, so no "import error" occurred.
The question is quite trivial, in some sense it simply is "what's the typical procedure to code and run python script and how modules are supposed to be imported-downloaded when running on a given machine?"
I need it since my script is to be run on another machine through ssh and using my laptop to make some attempts. Up to last year I used to work in C and only need to move some folders with code and .h files.
Thank for help!
EDIT 1:
From the Spyder 3.2.7 setting, where the script was giving non problem, I printed the
import sys
print(sys.path)
The -manually- copied the content to the sys.path variable in my_script.py and rerun 'run.sh' and now getting a new (strange) error:
Traceback (most recent call last):
[...]
File "/Users/my_computer/anaconda3/lib/python3.6/site-packages/tick/array/build/array.py", line 106
def tick_double_array_to_file(_file: 'std::string', array: 'ArrayDouble const &') -> "void":
^
SyntaxError: invalid syntax
First, check the python which you are calling the script with is pointing to the anaconda python and it is of the same version you are expecting it to be. You can do "which python" command in Linux and Mac to which the path which points to python. It if is pointing to some different version or build of python than the one which you are expecting then add the needed path to the system environment PATH variable. In Linux and Mac this can be done by adding the following line in the .bashrc file at the /home/ folder:
export PATH=/your/python/path:$PATH
And then source the .bashrc file.
source .bashrc
If you are on a operating system like cent os ,breaking the default python path can break your yum so be careful before changing it.
I am running a script in PyCharm and under the Project Interpretor I have the path
C:\envs\conda\keras2\python.exe
When I try to run the script via ssh on the server I get a 'no module named' error. I get
/usr/bin/python as the ans to 'which python' on the server itself. Could you tell me which path I must add for the script to run properly?
I have been at this for a day and have found no solution. My python project is very levels deep and some of the modules have to be run independently (no -m flag, no relative imports). For this reason we decided to add the root folder to the PYTHONPATH. I am running OSX 10.11.3. Everything had been running smoothly until yesterday. I could run independent modules from the terminal with no issues in both Python 2.7 and 3.5. Yesterday, without modifying my PYTHONPATH or any other environment setting, running any of these independent modules from the terminal now gives me import errors in both Python 2 and 3.
Here is my working tree:
/Users/sintrafico/Documents/code/central_maestra
- reports_server.py
- api_server.py
- sintrafico
- sql
- SQLConnection
- api
- incident
- csv (not package)
- independent_module
- tests
I was running my tests yesterday with coverage with no problem, but now I can't.
Python 2 python csv/independent_module.py gives error:
Traceback (most recent call last):
File "csv/independent_module.py", line 13, in <module>
from sintrafico.sql import SQLConnection
ImportError: No module named sintrafico.sql
Python 3 python3 csv/independent_module.py gives error:
Traceback (most recent call last):
File "csv/create_bemobile_csv.py", line 13, in <module>
from sintrafico.sql import SQLConnection
ImportError: No module named 'sintrafico'
From within the incident folder, yesterday this command was working fine: coverage run -m unittest discover. Now all the tests fail because ImportError: No module named 'reports_server'.
Since that started happening yesterday, I have been messing with my PYTHONPATH. I left it blank and it didn't work (as expected), I have added the path now several ways:
export PYTHONPATH=“${PYTHONPATH}:/Users/sintrafico/Documents/code/central_maestra"
export PYTHONPATH=“/Users/sintrafico/Documents/code/central_maestra:${PYTHONPATH}"
export PYTHONPATH=“${PYTHONPATH}:/Users/sintrafico/Documents/code/central_maestra/"
export PYTHONPATH=“/Users/sintrafico/Documents/code/central_maestra:${PYTHONPATH}"
And also setting it without appending the PYTHONPATH since it was empty to begin with. I restarted my computer several times with no success. Also note, I have a .bash_profile and .bashrc with the following contents:
# Setting PATH for Python 3.5
# The orginal version is saved in .bash_profile.pysave
PATH="/Library/Frameworks/Python.framework/Versions/3.5/bin:${PATH}"
export PATH
PYTHONPATH=“/Users/sintrafico/Documents/code/central_maestra:${PYTHONPATH}“
export PYTHONPATH
And lastly, what bugs me the most is that if I run the tests inside PyCharm they all run and pass, I get no import errors at all.
Have you tried setting the path without the quotes and braces? You are setting the python path as a string representation of the path instead of a list of paths
When executing script from command line, I got the following error
ImportError: No module named SubPackage3.MyClass
My package is structured as
TopLevelPackage
..SubPackage1
..SubPackage2
..SubPackage3
..__init_.py
..README.md
python (/usr/bin/python)
From other posts it seems that the problem is that the system does not recognize the path to SubPackage3. I have a separate __init_.py in each of the SubPackage, and print(sys.path) gave me
/home/shaunz/workspace/TopLevelPackage/SubPackage1
/home/shaunz/workspace/TopLevelPackage
/usr/lib/python2.7
....
Notice that only Package 1 is in the list of paths recognized. Any idea why this may be the case? And how do I change it?
I'm trying to run a module in SubPackage2. I'm using Eclipse.
Thanks
I'm facing of a strange issue, and after a couple of hour of research I'm looking for help / explanation about the issue.
It's quite simple, I wrote a cgi server in python and I'm working with some libs including pynetlinux for instance.
When I'm starting the script from terminal with any user, it works fine, no bug, no dependency issue. But when I'm trying to start it using a script in rc.local, the following code produce an error.
import sys, cgi, pynetlinux, logging
it produce the following error :
Traceback (most recent call last):
File "/var/simkiosk/cgi-bin/load_config.py", line 3, in
import cgi, sys, json, pynetlinux, loggin
ImportError: No module named pynetlinux
Other dependencies produce similar issue.I suspect some few things like user who executing the script in rc.local (root normaly) and trying some stuff found on the web without success.
Somebody can help me ?
Thanx in advance.
Regards.
Ollie314
First of all, you need to make sure if the module you want to import is installed properly. You can check if the name of the module exists in pip list
Then, in a python shell, check what the paths are where Python is looking for modules:
import sys
sys.path
In my case, the output is:
['', '/usr/lib/python3.4', '/usr/lib/python3.4/plat-x86_64-linux-gnu', '/usr/lib/python3.4/lib-dynload', '/usr/local/lib/python3.4/dist-packages', '/usr/lib/python3/dist-packages']
Finally, append those paths to $PATH variable in /etc/rc.local. Here is an example of my rc.local:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing
export PATH="$PATH:/usr/lib/python3.4:/usr/lib/python3.4/plat-x86_64-linux-gnu:/usr/lib/python3.4/lib-dynload:/usr/local/lib/python3.4/dist-packages:/usr/lib/python3/dist-packages"
# Do stuff
exit 0
The path where your modules are install is probably normally sourced by .bashrc or something similar. .bashrc doesn't get sourced when it's not an interactive shell. /etc/profile is one place that you can put system wide path changes. Depending on what Linux version/distro it may use /etc/profile.d/ in which case /etc/profile runs all the scripts in /etc/profile.d, add a new shell script there with execute permissions and a .sh extention.