Develop Reference

I can't get the url using json python

I'm trying to get the url of the minecraft skin through the api using python programming but I can't get the url, let's see if someone could
This is the code I'm currently using...
import json
import requests
import base64
response = requests.get(f"https://sessionserver.mojang.com/session/minecraft/profile/11f1cc006cc84499a174bc9b7fa1982a")
id = response.json()["properties"][0]["value"]
####
msg = f"{id}"
msg_bytes = msg.encode('ascii')
base64_bytes = base64.b64decode(msg_bytes)
base64_msg = base64_bytes.decode('ascii')
print(base64_msg)
Thank you very much in advance!

You will have to convert the string to json first.
import requests
import base64
import json
response = requests.get(
f"https://sessionserver.mojang.com/session/minecraft/profile/11f1cc006cc84499a174bc9b7fa1982a"
)
msg = response.json()["properties"][0]["value"]
base64_bytes = base64.b64decode(msg)
print(json.loads(base64_bytes)["textures"]["SKIN"]["url"])

You should always check that your HTTP request succeeds.
This is all you need:
from requests import get as GET
from base64 import b64decode as DECODE
from json import loads as LOADS
URL = 'https://sessionserver.mojang.com/session/minecraft/profile/11f1cc006cc84499a174bc9b7fa1982a'
(response := GET(URL)).raise_for_status()
data = response.json()['properties'][0]['value']
sd = LOADS(DECODE(data))
print(sd['textures']['SKIN']['url'])
Output:
http://textures.minecraft.net/texture/516ca747cee2cf895c02e0b4da4f1fe23495a140326538f960debaaa6fd67045
Note:
This code assumes that the JSON structures are as expected and that the keys always exist

Unable to extract the table from API using python

I am trying to extract a table using an API but I am unable to do so. I am pretty sure that I am not using it correctly, and any help would be appreciated.
Actually I am trying to extract a table from this API but unable to figure out the right way on how to do it. This is what is mentioned in the website. I want to extract Latest_full_data table.
This is my code to get the table but I am getting error:
import urllib
import requests
import urllib.request
locu_api = 'api_Key'
def locu_search(query):
api_key = locu_api
url = 'https://www.quandl.com/api/v3/databases/WIKI/metadata?api_key=' + api_key
response = urllib.request.urlopen(url).read()
json_obj = str(response, 'utf-8')
datanew = json.loads(json_obj)
return datanew
When I do print(datanew). Update: Even if I change it to return data new, error is still the same.
I am getting this below error:
name 'datanew' is not defined

I had the same issues with urrlib before. If possible, try to use requests it's a better designed and working library in my opinion. Also, it is capable of reading JSON with a single function so no need to run it through multiple lines Sample code here:
import requests
locu_api = 'api_Key'
def locu_search():
url = 'https://www.quandl.com/api/v3/databases/WIKI/metadata?api_key=' + api_key
return requests.get(url).json()
locu_search()
Edit:
The endpoint that you are calling might not be the correct one. I think you are looking for the following one:
import requests
api_key = 'your_api_key_here'
def locu_search(dataset_code):
url = f'https://www.quandl.com/api/v3/datasets/WIKI/{dataset_code}/metadata.json?api_key={api_key}'
req = requests.get(url)
return req.json()
data = locu_search("FB")
This will return with all the metadata regarding a company. In this case Facebook.

Maybe it doesn't apply to your specific problem, but what I normally do is the following:
import requests
def get_values(url):
response = requests.get(url).text
values = json.loads(response)
return values

Why is it giving me the error, "the JSON object must be str, not 'bytes'", and how do I fix it?

I was following a tutorial about how to use JSON objects (link: https://www.youtube.com/watch?v=Y5dU2aGHTZg). When they ran the code, they got no errors, but I did. Is it something to do with different Python versions or something?
from urllib.request import urlopen
import json
def printResults(data):
theJSON = json.loads(data)
print (theJSON)
def main():
urlData ="http://earthquake.usgs.gov/earthquakes/feed/v1.0/summary/2.5_day.geojson"
webUrl = urlopen(urlData)
print(webUrl.getcode())
if (webUrl.getcode()==200):
data = webUrl.read()
printResults(data)
else:
print ("You failed")
main()

The HTTPResponse object returned from urlopen reads bytes data (raw binary data), not str data (textual data), while the json module works with str. You need to know (or inspect the headers to determine) the encoding used for the data received, and decode it appropriately before using json.loads.
Assuming it's UTF-8 (most websites are), you can just change:
data = webUrl.read()
to:
data = webUrl.read().decode('utf-8')
and it should fix your problem.

I think they were using a different version of the urllib
Try with urllib3 and do the import like this:
from urllib import urlopen
Hope this is the fix to your problem

Convert results from url lib.request [duplicate]

I am trying to GET a URL using Python and the response is JSON. However, when I run
import urllib2
response = urllib2.urlopen('https://api.instagram.com/v1/tags/pizza/media/XXXXXX')
html=response.read()
print html
The html is of type str and I am expecting a JSON. Is there any way I can capture the response as JSON or a python dictionary instead of a str.

If the URL is returning valid JSON-encoded data, use the json library to decode that:
import urllib2
import json
response = urllib2.urlopen('https://api.instagram.com/v1/tags/pizza/media/XXXXXX')
data = json.load(response)
print data

import json
import urllib
url = 'http://example.com/file.json'
r = urllib.request.urlopen(url)
data = json.loads(r.read().decode(r.info().get_param('charset') or 'utf-8'))
print(data)
urllib, for Python 3.4
HTTPMessage, returned by r.info()

"""
Return JSON to webpage
Adding to wonderful answer by #Sanal
For Django 3.4
Adding a working url that returns a json (Source: http://www.jsontest.com/#echo)
"""
import json
import urllib
url = 'http://echo.jsontest.com/insert-key-here/insert-value-here/key/value'
respons = urllib.request.urlopen(url)
data = json.loads(respons.read().decode(respons.info().get_param('charset') or 'utf-8'))
return HttpResponse(json.dumps(data), content_type="application/json")

Be careful about the validation and etc, but the straight solution is this:
import json
the_dict = json.load(response)

resource_url = 'http://localhost:8080/service/'
response = json.loads(urllib2.urlopen(resource_url).read())

Python 3 standard library one-liner:
load(urlopen(url))
# imports (place these above the code before running it)
from json import load
from urllib.request import urlopen
url = 'https://jsonplaceholder.typicode.com/todos/1'

you can also get json by using requests as below:
import requests
r = requests.get('http://yoursite.com/your-json-pfile.json')
json_response = r.json()

Though I guess it has already answered I would like to add my little bit in this
import json
import urllib2
class Website(object):
def __init__(self,name):
self.name = name
def dump(self):
self.data= urllib2.urlopen(self.name)
return self.data
def convJSON(self):
data= json.load(self.dump())
print data
domain = Website("https://example.com")
domain.convJSON()
Note : object passed to json.load() should support .read() , therefore urllib2.urlopen(self.name).read() would not work .
Doamin passed should be provided with protocol in this case http

This is another simpler solution to your question
pd.read_json(data)
where data is the str output from the following code
response = urlopen("https://data.nasa.gov/resource/y77d-th95.json")
json_data = response.read().decode('utf-8', 'replace')

None of the provided examples on here worked for me. They were either for Python 2 (uurllib2) or those for Python 3 return the error "ImportError: No module named request". I google the error message and it apparently requires me to install a the module - which is obviously unacceptable for such a simple task.
This code worked for me:
import json,urllib
data = urllib.urlopen("https://api.github.com/users?since=0").read()
d = json.loads(data)
print (d)

HTTP requests and JSON parsing in Python [duplicate]

This question already has answers here:
How can I parse (read) and use JSON?
(5 answers)
What are the differences between the urllib, urllib2, urllib3 and requests module?
(11 answers)
Closed last month.
I want to dynamically query Google Maps through the Google Directions API. As an example, this request calculates the route from Chicago, IL to Los Angeles, CA via two waypoints in Joplin, MO and Oklahoma City, OK:
http://maps.googleapis.com/maps/api/directions/json?origin=Chicago,IL&destination=Los+Angeles,CA&waypoints=Joplin,MO|Oklahoma+City,OK&sensor=false
It returns a result in the JSON format.
How can I do this in Python? I want to send such a request, receive the result and parse it.

I recommend using the awesome requests library:
import requests
url = 'http://maps.googleapis.com/maps/api/directions/json'
params = dict(
origin='Chicago,IL',
destination='Los+Angeles,CA',
waypoints='Joplin,MO|Oklahoma+City,OK',
sensor='false'
)
resp = requests.get(url=url, params=params)
data = resp.json() # Check the JSON Response Content documentation below
JSON Response Content: https://requests.readthedocs.io/en/master/user/quickstart/#json-response-content

The requests Python module takes care of both retrieving JSON data and decoding it, due to its builtin JSON decoder. Here is an example taken from the module's documentation:
>>> import requests
>>> r = requests.get('https://github.com/timeline.json')
>>> r.json()
[{u'repository': {u'open_issues': 0, u'url': 'https://github.com/...
So there is no use of having to use some separate module for decoding JSON.

requests has built-in .json() method
import requests
requests.get(url).json()

import urllib
import json
url = 'http://maps.googleapis.com/maps/api/directions/json?origin=Chicago,IL&destination=Los+Angeles,CA&waypoints=Joplin,MO|Oklahoma+City,OK&sensor=false'
result = json.load(urllib.urlopen(url))

Use the requests library, pretty print the results so you can better locate the keys/values you want to extract, and then use nested for loops to parse the data. In the example I extract step by step driving directions.
import json, requests, pprint
url = 'http://maps.googleapis.com/maps/api/directions/json?'
params = dict(
origin='Chicago,IL',
destination='Los+Angeles,CA',
waypoints='Joplin,MO|Oklahoma+City,OK',
sensor='false'
)
data = requests.get(url=url, params=params)
binary = data.content
output = json.loads(binary)
# test to see if the request was valid
#print output['status']
# output all of the results
#pprint.pprint(output)
# step-by-step directions
for route in output['routes']:
for leg in route['legs']:
for step in leg['steps']:
print step['html_instructions']

just import requests and use from json() method :
source = requests.get("url").json()
print(source)
OR you can use this :
import json,urllib.request
data = urllib.request.urlopen("url").read()
output = json.loads(data)
print (output)

Try this:
import requests
import json
# Goole Maps API.
link = 'http://maps.googleapis.com/maps/api/directions/json?origin=Chicago,IL&destination=Los+Angeles,CA&waypoints=Joplin,MO|Oklahoma+City,OK&sensor=false'
# Request data from link as 'str'
data = requests.get(link).text
# convert 'str' to Json
data = json.loads(data)
# Now you can access Json
for i in data['routes'][0]['legs'][0]['steps']:
lattitude = i['start_location']['lat']
longitude = i['start_location']['lng']
print('{}, {}'.format(lattitude, longitude))

Also for pretty Json on console:
json.dumps(response.json(), indent=2)
possible to use dumps with indent. (Please import json)