I'm trying to have output to be without commas, and separate each line into two strings and print them.
My code so far yields:
173,70
134,63
122,61
140,68
201,75
222,78
183,71
144,69
But i'd like it to print it out without the comma and the values on each line separated as strings.
if __name__ == '__main__':
# Complete main section of code
file_name = "data.txt"
# Open the file for reading here
my_file = open('data.txt')
lines = my_file.read()
with open('data.txt') as f:
for line in f:
lines.split()
lines.replace(',', ' ')
print(lines)
In your sample code, line contains the full content of the file as a str.
my_file = open('data.txt')
lines = my_file.read()
You then later re-open the file to iterate the lines:
with open('data.txt') as f:
for line in f:
lines.split()
lines.replace(',', ' ')
Note, however, str.split and str.replace do not modify the existing value, as strs in python are immutable. Also note you are operating on lines there, rather than the for-loop variable line.
Instead, you'll need to assign the result of those functions into new values, or give them as arguments (E.g., to print). So you'll want to open the file, iterate over the lines and print the value with the "," replaced with a " ":
with open("data.txt") as f:
for line in f:
print(line.replace(",", " "))
Or, since you are operating on the whole file anyway:
with open("data.txt") as f:
print(f.read().replace(",", " "))
Or, as your file appears to be CSV content, you may wish to use the csv module from the standard library instead:
import csv
with open("data.txt", newline="") as csvfile:
for row in csv.reader(csvfile):
print(*row)
with open('data.txt', 'r') as f:
for line in f:
for value in line.split(','):
print(value)
while python can offer us several ways to open files this is the prefered one for working with files. becuase we are opening the file in lazy mode (this is the prefered one espicialy for large files), and after exiting the with scope (identation block) the file io will be closed automaticly by the system.
here we are openening the file in read mode. files folow the iterator polices, so we can iterrate over them like lists. each line is a true line in the file and is a string type.
After getting the line, in line variable, we split (see str.split()) the line into 2 tokens, one before the comma and the other after the comma. split return new constructed list of strings. if you need to omit some unwanted characters you can use the str.strip() method. usualy strip and split combined together.
elegant and efficient file reading - method 1
with open("data.txt", 'r') as io:
for line in io:
sl=io.split(',') # now sl is a list of strings.
print("{} {}".format(sl[0],sl[1])) #now we use the format, for printing the results on the screen.
non elegant, but efficient file reading - method 2
fp = open("data.txt", 'r')
line = None
while (line=fp.readline()) != '': #when line become empty string, EOF have been reached. the end of file!
sl=line.split(',')
print("{} {}".format(sl[0],sl[1]))
I read an file into a string in Python, and it shows up as encoded (not sure the encoding).
query = ""
with open(file_path) as f:
for line in f.readlines():
print(line)
query += line
query
The lines all print out in English as expected
select * from table
but the query at the end shows up like
ÿþd\x00r\x00o\x00p\x00 \x00t\x00a\x00b\x00l\x00e\x00
What's going on?
Agreed with Carlos, the encoding seems to be UTF-16LE. There seems to be BOM present, thus encoding="utf-16" would be able to autodetect if it's little- or big-endian.
Idiomatic Python would be:
with open(file_path, encoding="...") as f:
for line in f:
# do something with this line
In your case, you append each line to query, thus entire code can be reduced to:
query = open(file_path, encoding="...").read()
It seems like UTF-16 data.
Can you try decoding it with utf-16?
with open(file_path) as f:
query=f.decode('utf-16')
print(query)
with open(filePath) as f:
fileContents = f.read()
if isinstance(fileContents, str):
fileContents = fileContents.decode('ascii', 'ignore').encode('ascii') #note: this removes the character and encodes back to string.
elif isinstance(fileContents, unicode):
fileContents = fileContents.encode('ascii', 'ignore')
I am trying to write a python script to convert rows in a file to json output, where each line contains a json blob.
My code so far is:
with open( "/Users/me/tmp/events.txt" ) as f:
content = f.readlines()
# strip to remove newlines
lines = [x.strip() for x in content]
i = 1
for line in lines:
filename = "input" + str(i) + ".json"
i += 1
f = open(filename, "w")
f.write(line)
f.close()
However, I am running into an issue where if I have an entry in the file that is quoted, for example:
client:"mac"
This will be output as:
"client:""mac"""
Using a second strip on writing to file will give:
client:""mac
But I want to see:
client:"mac"
Is there any way to force Python to read text in the format ' "something" ' without appending extra quotes around it?
Instead of creating an auxiliary list to strip the newline from content, just open the input and output files at the same time. Write to the output file as you iterate through the lines of the input and stripping whatever you deem necessary. Try something like this:
with open('events.txt', 'rb') as infile, open('input1.json', 'wb') as outfile:
for line in infile:
line = line.strip('"')
outfile.write(line)
I'm working in 'wb' mode with array of bytes
for i in range(len(mas)):
message.write(mas[i])
after I have to write data to a file on new line, for example '\n' in 'w' mode
for i in range(3):
message.write(str(i))
message.write("\n")
>>>0
>>>1
>>>2
>>>3
How can I do this?
To write a string to a binary file you, like "\n" into wb mode, you must first encode it by calling string.encode('utf-8') or any other encoding you need.
For example, to write a message to a binary file:
with open("a.txt", "wb") as f:
line = str(0) + "\n\n"
f.write(line.encode('utf-8'))
This would write 0\n\n. To write the numbers from 0 to 3, followed by blank lines:
with open("a.txt", "wb") as f:
for i in range(4):
line = str(i) + "\n\n"
f.write(line.encode('utf-8'))
Encoded newlines are printed as newlines correctly, so the following lines are equivalent:
open('a.txt', 'w').write('\n')
open('a.txt', 'wb').write('\n'.encode('utf-8'))
open('a.txt', 'wb').write(b'\n')
To print a literal \n, and not a newline, escape the backslash with another backslash \\n or write r'\n' to create a "raw" string.
I think you need to write a newline bytestring to your file after each of your bytearrays:
for i in range(len(mas)):
message.write(mas[i])
message.write(b"\n")
Note that a more natural (Pythonic) way of writing your loop is to iterate directly over mas, rather than iterating on a range and then indexing. You can also combine the two write calls into one:
for line in mas:
message.write(line + b"\n")
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n