I can't figure out how to setup my Windows 7 machine so that it "always" finds my Python 3.6 Anaconda environment, which is not my root env. I don't want to have to do "activate ..." in a cmd window every time I want to use that env. And besides, there's a Spyder item in the start menu, for 3.6 (separate from default env), which won't work. I assume because of an env issue.
A robust solution greatly appreciated.
Dave
I had a similar issue where every time I opened anaconda prompt it started with 'base' as the default environment. But the issue was that I was mostly working in a different custom environment so I had to activate it each time I wanted to use it.
Here is the solution I found for autoactivating my preferred environment on a Windows 10 system:
Open anaconda prompt & use 'conda env list' to find the location of the environment you wish to use.
Go to the start menu, right-click 'Anaconda Prompt' and go to file location.
Create a copy of its shortcut
Open its properties & change the target to the location of your preferred environment.
Now every time you open anaconda prompt through this shortcut it will automatically load your chosen environment.
Related
Maybe a simple question, but I cannot figure it out. I work within Visual Studio Code on a MacBook. Within a directory I create a virtual environment and have activated that with source .venv/bin/activate scripts and everything works fine.
In the terminal I see (.venv) (base) gaston#MacBook-Pro WebScraping %
When I start visual code another time and open this same directory I do not see the (.venv) so I again give manually the command to activate.
My question is there a way to activate the virtual environment automatically when opening the directory?
VS Code Default Python Interpreter Path
You can do this in a number of ways. If your goal is to have the virtual environment selected immediately at the launch of VS Code, you will have to target that virtual environment as the Python Interpreter in VSC.
https://code.visualstudio.com/docs/python/environments
System Preferences->Settings->Python: Default Interpreter Path
You'll want to point it to your virtualenv Python installation, likely something like:
envFolder/bin/python3
VS Code Launch Configuration Python Interpreter
You can also set a specific launch configuration so that VSCode will still use your system Python instance by default; however, specific launch configurations will have the virtual environment specified.
https://code.visualstudio.com/docs/python/debugging
I did something within settings and now it works.
When I open VSC now it opens the directory and the right environment, just the way I wanted it.
Took me some while to figure what finally did the trick:
I opened settings Command + , typed env in the search box. Scrolled through the results until I saw:
Python > Terminal: Activate Env In Current Terminal
and checked the checkbox. That solved my problem.
I am using visual studio code to try and replace the Spyder IDE. To replicate Spyder's variable explorer, I am trying to leverage VS code's Python Interactive Window.
Upon launching Vs Code, I select my environment using "Select Interpreter" and then picking the env. This then changes at the bottom of the application as expected.
However, when I then try and run my code in the interactive window it appears to reference a different environment? It also keeps telling me to install ipykernel.
Is this functioning correctly? I do see an option to change the env in the interactive window but that doesn't do anything.enter image description here
I found a similar question here But I have ipykernel installed in my environment so I'm not sure why it wouldn't notice that? Is there another dependency?
Maybe we can simplify the problem.
Click top-right environment and changes it to which you want.
Start off by opening your Anaconda prompt and from there activate your virtual environment (type: conda activate my_env, replacing my_env with your environment name, and hit enter.)
Then type the command: 'code', which will open up VS Code from within your active virtual environment. Before this approach, also check that your VS Code settings.json file has the python path set correctly to your environment installation. Now it should work.
To see your install path: Anaconda is installed in your user home directory: Windows 10: C:\Users\\Anaconda3\
I'm pretty new to programming, so maybe there's something painfully obvious that I've missed, but I've searched a lot around for solutions to this issue without finding any.
I just got a new computer and installed Anaconda and PyCharm for Anaconda. I got it to work fine on my old computer, but when I try to open PyCharm now and create a project, it gets stuck on the creation of the conda environment. Apparently there's a new conda update, so I tried to update to this one in Spyder, which seemed to work fine, but when PyCharm tries creating a new environment, it gets stuck and only displays
"Creating Conda environment"
"$ conda update -n base -c defaults conda"
Does anybody know what's happening? I've tried just waiting it out, but it doesn't seem to be moving forward at all from that point. I've also uninstalled both Anaconda and PyCharm with all their plugins and reinstalling them, but to no avail.
Thanks for any help or input!
Sincerely, confused first year student
It appears that Sophie was able to get the conda environment up and running.
However, other newcomers might come across a similar problem with regards to setting up Anaconda for use within PyCharm. Therefore, I provide a guide below that I recently (today) used in order to accomplish this on a fresh install on a new computer. For this I decided to use PyCharm Community Edition 2018.3 and Anaconda3 version 2019.07. I performed this on Windows 10 Enterprise version 1903. I have also performed this procedure on Windows 7 Home Premium edition (some time ago).
This will enable you to use PyCharm and Anaconda together, so that you can:
Know the prerequisite steps leading up to creating a conda environment, and become familiar with the steps following this action with using Anaconda with PyCharm.
Use the Terminal window in PyCharm with packages that are installed with Anaconda's version of Python. You can then use both regular python and conda commands to view, update or install packages. For instance, depending on your preference, you could use 'pip list' (python command) or 'conda list' to list installed packages.
Use the Anaconda python interpreter as the default Python Console in PyCharm
To accomplish this, please follow these steps:
Install PyCharm, and import any settings file you may have from previous PyCharm installation on other computer (optional). Assuming you are starting fresh, create a new project and set the (default) project folder location.
Install Anaconda. My install location was set to C:\ProgramData\Anaconda3. Note that 'ProgramData' folder is hidden by default. You should enable viewing of hidden folders in windows explorer, if you need to manually browse for it. Upon installation, I decided to have the options Add Anaconda to my PATH environment variable and Register Anaconda as my default Python 3.7 set as deselected.
Open Windows Explorer and paste in C:\ProgramData\Anaconda3 (or your install directory) in the address bar. This should take you to that directory. Navigate to the environments folder named envs. Select the address bar and copy that address. I got C:\ProgramData\Anaconda3\envs. You will need this later.
Open program named Anaconda Navigator (Anaconda3). You should see this from the list of newly installed programs. Alternatively, search for it and open it. This will initialize some stuff (unknown to me) that I have found necessary to be able to complete this guide. For the next steps we dont need this program running. You could close it if you want.
Decide on a name for the (ana)conda environment that we will create. I used py37 for simplicity. You only need to do this once for the python projects you will make. It is possible to make more environments if you should need that for some python projects in the future.
Open program named Anaconda Prompt (Anaconda3), preferentially as administrator. Opening as administrator may prevent complications that could occur on some systems. To do so, search for the program and then right-click it, and choose Run as administrator.
Enter this command: conda create -n py37 python=3.7 anaconda. It should prompt you to install some packages. Enter y to accept and proceed with the setup. This step may take some time to finish. Once finished, it may show you the needed command to activate the environment. Don't activate it just yet, ie. ignore that message for now.
Assuming environment path C:\ProgramData\Anaconda3\envs and environment name py37, run the following command (alter as needed to match your environment path and name): set PATH=C:\ProgramData\Anaconda\envs\py37\Scripts;C:\ProgramData\Anaconda\envs\py37;%PATH%
Run this command: conda activate py37. This will activate your environment.
Navigate to a folder you can easily access, such as the Documents folder on your machine. To do so, execute this command: cd "C:\Users\YourUsername\Documents".
Execute the following command: echo %PATH% > path_value.txt. This will export "PATH" values to a text file that can be found in the Documents folder as path_value.txt. Open this file and copy the content within. This will be needed in the following steps with setting up PyCharm for use with the Anaconda environment.
In PyCharm, navigate to Settings - Tools - Terminal. Check that Start directory field contains the path of your project folder, ie. such as C:/Users/YourUsername/Documents/YourProjectFolderName. Then, select the folder icon for the Environment variables field. Click the plus symbol, and add a new entry with PATH and your path value (as found from the path_value.txt file) in the Name and Value fields, respectively.
In PyCharm, navigate to Settings - Project Interpreter - Add Python Interpreter - Conda Environment - Existing environment. Browse for C:\ProgramData\Anaconda3 (or your install directory). Select the file named python.exe. I chose to edit the Name field of this Anaconda python interpreter as Python 3.7 Anaconda.
In PyCharm, navigate to Settings - Build, Execution, Deployment - Console - Python Console. Check that the Python interpreter field contains Project Default (Python 3.7 Anaconda) or similar entry. The Environment variables input may be empty. Select the folder button next to it and add a new entry with PATH and your path value (as found from the path_value.txt file) in the Name and Value fields, respectively. Exactly the same entries as was inputted in step 12.
[Optional] In PyCharm, navigate to Settings and search for the Run context configuration option. Right click it and select a desired shortcut method. Personally I use a keyboard shortcut which is set to Ctrl+Shift+Less. Once the rest of these steps are followed, this will allow you to run the current python .py file you have open, without having to manually set up configuration options for it (through Add Configuration option, next to green play button, as seen if you have no configurations set up from before). It will force PyCharm to use the default project interpreter (which now is the desired Anaconda-delivered Python 3.7 installation) for whatever project you have open. To use it, just open a .py python file with some code inside, click anywhere inside of it, and then use your shortcut option.
[Note: If you skipped step 15, go to step 17] Run your python file with the method from step 15. This should automatically set up a run configuration option for that file. You may get an error of missing packages. Ignore that for now.
Select Edit Configuration or Add Configuration in the dropdown box next to the green play / run button. Open the Templates tree, then select Python. Check that the Python interpreter option contains Python 3.7 Anaconda or similar. The Environment variables field may contain PYTHONUNBUFFERED=1. Regardless, select the related folder button and add a new entry with PATH and your path value (as found from the path_value.txt file) in the Name and Value fields, respectively. Exactly the same as we did in steps 12 and 14.
Restart PyCharm to re-initialize the Terminal and Python Console windows. Or manually close and reopen those windows.
You have now created and activated an (ana)conda environment, and enabled it's use from within PyCharm. You should also now be able to ie. copy your code over to a fresh new file, and then hit ie. Ctrl+Shift+Less to run the file without having to manually set a configuration file for it.
Hope this helped!
Sources: source1, source2, source3
In my Experience I just opened PyCharm as administrator and the error was gone!
If you use PyCharm to create conda environment, you can choose conda environment not virtualenv.
When you get the error like "can't get the /path/to/", you can open PyCharm with administrator.
If you use "anaconda prompt" to create conda environment, you can use command line like conda create -n py36 python=3.6. Then you can activate environment using conda activate py36.
I have installed anaconda with python 3.5, and created a new environment with Python 2.7 (on windows 10).
I can easily change the Anaconda environment with the command line tool. However in Pycharm, when I try to change the Python interpreter, I can only see the Anaconda Python 3.5 version.
Is there a easy way to select the Anaconda environment from Pycharm?
In PyCharm you can add how many interpreter you want. You have to go in
Settings->Project->Project Interpreter
Here, you should see the current interpreter.
At the top of the window, there is a list which contains all local interpreters.
If you find it in the list select it, otherwise, in the right corner of the window, there is a settings icon; press it and press on Add local.
After this navigate in your computer and select the directory that contains the Anaconda env.
edit
As PatriceG suggested in comments, if you already have an Anaconda environment but you don't know where is it or you don't remember, you can check the current position using the following command:
conda info --envs
Then, you should be able to find and select it.
Now, you have to add the anconda env to your local interpreter, so you are able to use it.
Go to Setting then Project Interpreter Click on Setting icon which will lead to browse folder, Choose Add Local then on left side of page, click on system Interpreter then Press OK and Apply.
I have just installed Anaconda on my computer because I need to use Numpy.
Well, when I use python I for some reason have to be in the same folder as python.exe and, of course, now that I want to use Anaconda I have to be in the Anaconda3\Scripts folder where python.exe isn't. This is a nightmare, how can I use anaconda with python on a windows computer? Why does it have to be so complicated?
I think you are referring to the command-line use of python?
If you have admin priviliges on your machine you can add python to your environment variables, making it available in the console anywhere. (Sorry for different spellings, I am not on an english machine)
Press Shift+Pause ("System")
Click "Advanced System Options"
Click "Environment variables"
In the lower field with "System variables" there is a variable called PATH. Append the complete path to your python.exe without the file to that by adding a ; behind the last path in the variable and then adding your path. Do not add any spaces!
Example: C:\examplepath\;C:\Python27\
When you install anaconda on windows now, it doesn't automatically add Python or Conda to your path.
If you don’t know where your conda and/or python is, you type the following commands into your anaconda prompt (it comes when you install anaconda)
Next, you can add Python and Conda to your path by using the setx command in your command prompt.
Next close that command prompt and open a new one. You should now be able to use the python command. To do this you open a command prompt and type
python nameofPythonfile.py
Source: https://medium.com/#GalarnykMichael/install-python-on-windows-anaconda-c63c7c3d1444
To be able to do that in the command line you just have to add Python and also the Anaconda3\Scripts directory to your system path.
Here is a good tutorial on setting your path in Windows:
http://www.computerhope.com/issues/ch000549.htm