I am trying to clone and install the keras package from github. When I run sudo python setup.py install, it says no module named setuptools. I looked at some posts that were for python 3; however, this solutions did not work for me. I am working on a terminal from a windows computer. I am using python 2.7. I tried the following commands: python -m pip install -U pip setuptools from this website: https://packaging.python.org/installing/. However, nothing seemed to work.
If you are working on Windows then you should be typing batch commands, not bash (Linux, OSX), therefore, sudo ... should not be used by you.
Firstly, I would recommend to install pip, it will make package update and installation a lot easier. Save it as get-pip.py and run the following in the directory the file is located python get-pip.py. Official pip website.
Then install upgrade pip which will also install the latest versions of setuptools and wheel with this python -m pip install -U pip setuptools.
Related
I am trying to run this tutorial
https://learn.microsoft.com/en-US/azure/data-factory/quickstart-create-data-factory-python
but I fail to install the packages. I tried several installations but I keep getting the error No module named 'azure.mgmt.datafactory' when trying to run from azure.mgmt.datafactory import DataFactoryManagementClient.
I am using anaconda and windows 10.
I tried running the recommended anaconda packages https://anaconda.org/anaconda/azure and https://anaconda.org/clinicalgraphics/azure-mgmt-resource under a python 3.5 environment and I also tried to manually install everything from github (https://github.com/Azure/azure-sdk-for-python) using
git clone git://github.com/Azure/azure-sdk-for-python.git
cd azure-sdk-for-python
python setup.py install
In both the normal (Python 3.6) and the new (Python 3.5, using Anaconda version with Python 3.5) environment. None of this worked.
What am I missing?
(Note that from azure.mgmt.resource import ResourceManagementClient worked fine with the anaconda installation)
EDIT
After the first response, I ran the following commands from the powershell
pip install azure-mgmt-resource
pip install azure-mgmt-datafactory
pip install azure-mgmt
which resulted in ModuleNotFoundError: No module named 'azure.mgmt'
Uninstalling the three packages and installing azure-mgmt as a first one did not solve the issue either. However, I don't know how to uninstall the manually installed package from python setup.py install, which still might be an issue.
Have you tried pip install in powershell/cmd?
pip install azure-mgmt-datafactory
Update (Jan's answer):
pip freeze > requirements.txt
pip uninstall -r requirements.txt
python -m pip install azure-common
python -m pip install azure-mgmt
python -m pip install azure-mgmt-datafactory (this might not be needed as it comes with azure-mgmt)
Ok, this is how I got the required azure libraries to work (thx to Saul Cruy, who gave me the idea)
Using this post What is the easiest way to remove all packages installed by pip?, I created a requirements file in PowerShell
pip freeze > requirements.txt
In this file, I manually kept only the entries with azure.
Then, I deleted all packages in the file
pip uninstall -r requirements.txt
The steps above were repeated twice, as upon first delete, some azure packages survived.
Then, I ran (all in PowerShell, in that order)
python -m pip install azure-common
python -m pip install azure-mgmt
python -m pip install azure-mgmt-datafactory
The reason might(!) be that installing packages in the anaconda console using the conda commands causes confusion in the dependencies (I tried a similar approach in a conda environment as it seemed like a good idea to seperate the azure packages from the other ones, but without success).
I'm running Python 3.5 (on Windows) and I have installed python-ldap from https://pypi.python.org/pypi/python-ldap/
I also tried using ldap3 but I keep getting an error saying
"ImportError: No module named 'ldap'
I looked around and saw some people saying there's no python-ldap for 3.5 so I installed 2.6 still getting the same error.
Is there a way to import ldap and make it work for Python 3.5?
Try the command below:
sudo apt-get install libsasl2-dev python-dev libldap2-dev libssl-dev
sudo pip3 install pyldap
Open a command line(cmd, powershell, git bash)
Check you python version
$ pyhton --version
Go to https://www.lfd.uci.edu/~gohlke/pythonlibs/
Download the library according with your python version and windows system
And install it on a command line using
pip install file_downloaded.whl
For example:
If you have python 3.5x and windows x64,
download the file python_ldap‑3.2.0‑cp35‑cp35m‑win_amd64.whl
pip install python_ldap‑3.2.0‑cp35‑cp35m‑win_amd64.whl
I'm running Apache Airflow on an Amazon EC2-Instance and I was getting "ImportError: No module named 'ldap3'. I used these two sites https://www.python-ldap.org/en/latest/installing.html and http://ldap3.readthedocs.io/installation.html to run the commands sudo python -m pip install python-ldap and sudo pip install ldap3 but my pip wasn't working for the last command so after some investigation I found out in my /usr/bin/ directory I had pip, pip-2.7, pip-3.6, and pip-python so I changed the command to pip-3.6 install ldap3 and then everything worked! Hope this helps someone.
I tried multiple approaches but finally, PyPI official documentation fixed this.
I was trying to execute on VS Code and did pip3 install python-ldap, but it didn't solve the issue. So I did the below from VS Code
# %% - This runs the below code as a Jupyter notebook cell
!pip3 install python-ldap
Now, I am able to import ldap and use it
Inside you folder, you can use virtualenv for python 3, example:
/opt/python-ldap-test
virtualenv -p /usr/bin/python3.5 venv
source venv/bin/activate
and then
pip install ldap3
It's extremely complicated to make things from 2.X to work in 3.X. Have you tried using it in a separate, 2.X only script and using it from there? It's not so unusual to combine python 2.X with 3.X in that manner or so I've heard.
I usually try to install libraries for python by :
sudo apt-get install python-lib name
and when the operation is complete I can't import the library I have tried this for pygame,tk and other libs. I also usually can't install any library with pip because it gives me a bunch of error and I have also tried installing packages with their source by :
python setup.py build
python setup.py install
and usually I get errors on the "build" part.
What should I do?
Are you using Ubuntu? Probably yes. Ubuntu have two versions of python preinstalled: python2.7 and python3.4. Your command is installing library for python2.7. If you are writing your script for python 3.4, then you fail with import libraries. Try using sudo apt-get install python3-packagename to install library for python3.
edit:
are you using your pip command with sudo? sudo pip instal ...?
I am very new to the world of coding, so I will try to provide as much information as i can regarding to my question.
Essentially, I wanted to install a module (moviepy) for Python 3. The site were I found the module suggested I use pip to unpack and install the module, so I did.
In my terminal, I entered pip install moviepy and pip proceeded to unpack and install my module, yay!
I then went over to my IDLE to see if the module would import, import moviepy, but received this error:
ImportError: No module named 'moviepy'
Huh? I thought I had just installed moviepy?
Upon further investigation, the module appears to have been written to my Python 2.7 site-packages folder and not my in Python 3 site-packages folder.
So my question is: How can I get my module to install to Python 3?
The modules website says that it is compatible with Python 3.
Im assuming this is a file path issue of some kind, but i don't know where to begin.
I'm currently using a OS X Yosemite version 10.10.2, Python 2.7.6, Python 3.5.0
Any help or comments are greatly appreciated here!
Help the n00b!
If you are using python in linux you must run pip with python3:
python3 -m pip install moviepy
according to python official doc :
On Linux, Mac OS X and other POSIX systems, use the versioned Python
commands in combination with the -m switch to run the appropriate copy
of pip:
python2 -m pip install SomePackage # default Python 2
python2.7 -m pip install SomePackage # specifically Python 2.7
python3 -m pip install SomePackage # default Python 3
python3.4 -m pip install SomePackage # specifically Python 3.4
Since pip itself is written in python , you could simply run the following in your terminal:
/path/to/python3 /usr/bin/pip install foo
More info:
To install pip, securely download get-pip.py
Run the following (which may require administrator access):
/path/to/python3 get-pip.py
Try below version of moviepy
pip install moviepy==0.2.3.5
Is there any way to install requests-kerberos on Windows?
When I try to install it with pip I have the following error:
py -m pip install requests-kerberos
ImportError: No module named 'commands'
Command "python setup.py egg_info" failed with error code 1 in C:\Users\user1\AppData\Local\Temp\pip-build-n8s_inn\kerberos
I would be grateful if anyone knew another kerberos module. I'm using Python 3.4 and Windows 8.
Best regards.
The commands module was deprecated in python 2.6.
Thus, the issue appears to be a problem with your pip installation, and not with requests-kerberos.
There are a few things you can try, but I would focus on ensuring pip is working correctly. While you could install the package manually, you are really just pushing the pip problem down the road until the next time you install a package.
Ensure pip is installed correctly.
Use the pip command to ensure you are running pip in the python 3.4 context: (Note, this is my output, yours will be different because you are on Windows and running 3.4)
$ pip --version
pip 1.5.6 from /Library/Python/2.7/site-packages/pip-1.5.6-py2.7.egg (python 2.7)
Additional information about pip can be found here.
Download and install manually
Download the package manually from the pypi repo.
Download the .tar.gz
Extract the tar.gz and run python setup.py install