When exactly does Python import? - python

Question
If I have import statements nested in an if/else block, am I increasing efficiency? I know some languages do "one passes" over code for import and syntax issues. I'm just not sure how in depth Python goes into this.
My Hypothesis
Because Python is interpreted and not compiled, by nesting the import statements within the else block, those libraries will not be imported until that line is reached, thus saving system resources unless otherwise needed.
Scenario
I have written a script that will be used by both the more computer literate and those are lesser so. My department is very comfortable with running scripts from the command line with arguments so I have set it up to take arguments for what it needs and, if it does not find the arguments it was expecting, it will launch a GUI with headings, buttons, and more verbose instructions. However, this means that I am importing libraries that are only being used in the event that the arguments were not provided.
Additional Information
The GUI is very, very basic (A half dozen text fields and possibly fewer buttons) so I am not concerned with just creating and spawning a custom GUI class in which the necessary libraries would be imported. If this gets more complicated, I'll consider it in the future or even push to change to web interface.
My script fully functions as I would expect it to. The question is simply about resource consumption.

import statements are executed as they're encountered in normal execution, so if the conditional prevents that line from being executed, the import doesn't occur, and you'll have avoided unnecessary work.
That said, if the module is going to be imported in some other way (say, unconditionally imported module B depends on A, and you're conditionally importing A), the savings are trivial; after the first import of a module, subsequent imports just get a new reference to the same cached module; the import machinery has to do some complicated stuff to handle import hooks and the like first, but in the common case, it's still fairly cheap (sub-microsecond when importing an already cached module).
The only way this will save you anything is if the module in question would not be imported in any way otherwise, in which case you avoid the work of loading it and the memory used by the loaded module.

Related

Choose Python classes to instantiate at runtime based on either user input or on command line parameters

I am starting a new Python project that is supposed to run both sequentially and in parallel. However, because the behavior is entirely different, running in parallel would require a completely different set of classes than those used when running sequentially. But there is so much overlap between the two codes that it makes sense to have a unified code and defer the parallel/sequential behavior to a certain group of classes.
Coming from a C++ world, I would let the user set a Parallel or Serial class in the main file and use that as a template parameter to instantiate other classes at runtime. In Python there is no compilation time so I'm looking for the most Pythonic way to accomplish this. Ideally, it would be great that the code determines whether the user is running sequentially or in parallel to select the classes automatically. So if the user runs mpirun -np 4 python __main__.py the code should behave entirely different than when the user calls just python __main__.py. Somehow it makes no sense to me to have if statements to determine the type of an object at runtime, there has to be a much more elegant way to do this. In short, I would like to avoid:
if isintance(a, Parallel):
m = ParallelObject()
elif ifinstance(a, Serial):
m = SerialObject()
I've been reading about this, and it seems I can use factories (which somewhat have this conditional statement buried in the implementation). Yet, using factories for this problem is not an option because I would have to create too many factories.
In fact, it would be great if I can just "mimic" C++'s behavior here and somehow use Parallel/Serial classes to choose classes properly. Is this even possible in Python? If so, what's the most Pythonic way to do this?
Another idea would be to detect whether the user is running in parallel or sequentially and then load the appropriate module (either from a parallel or sequential folder) with the appropriate classes. For instance, I could have the user type in the main script:
from myPackage.parallel import *
or
from myPackage.serial import *
and then have the parallel or serial folders import all shared modules. This would allow me to keep all classes that differentiate parallel/serial behavior with the same names. This seems to be the best option so far, but I'm concerned about what would happen when I'm running py.test because some test files will load parallel modules and some other test files would load the serial modules. Would testing work with this setup?
You may want to check how a similar issue is solved in the stdlib: https://github.com/python/cpython/blob/master/Lib/os.py - it's not a 100% match to your own problem, nor the only possible solution FWIW, but you can safely assume this to be a rather "pythonic" solution.
wrt/ the "automagic" thing depending on execution context, if you decide to go for it, by all means make sure that 1/ both implementations can still be explicitely imported (like os.ntpath and os.posixpath) so they are truly unit-testable, and 2/ the user can still manually force the choice.
EDIT:
So if I understand it correctly, this file you points out imports modules depending on (...)
What it "depends on" is actually mostly irrelevant (in this case it's a builtin name because the target OS is known when the runtime is compiled, but this could be an environment variable, a command line argument, a value in a config file etc). The point was about both conditional import of modules with same API but different implementations while still providing direct explicit access to those modules.
So in a similar way, I could let the user type from myPackage.parallel import * and then in myPackage/init.py I could import all the required modules for the parallel calculation. Is this what you suggest?
Not exactly. I posted this as an example of conditional imports mostly, and eventually as a way to build a "bridge" module that can automagically select the appropriate implementation at runtime (on which basis it does so is up to you).
The point is that the end user should be able to either explicitely select an implementation (by explicitely importing the right submodule - serial or parallel and using it directly) OR - still explicitely - ask the system to select one or the other depending on the context.
So you'd have myPackage.serial and myPackage.parallel (just as they are now), and an additional myPackage.automagic that dynamically selects either serial or parallel. The "recommended" choice would then be to use the "automagic" module so the same code can be run either serial or parallel without the user having to care about it, but with still the ability to force using one or the other where it makes sense.
My fear is that py.test will have modules from parallel and serial while testing different files and create a mess
Why and how would this happen ? Remember that Python has no "process-global" namespace - "globals" are really "module-level" only - and that python's import is absolutely nothing like C/C++ includes.
import loads a module object (can be built directly from python source code, or from compiled C code, or even dynamically created - remember, at runtime a module is an object, instance of the module type) and binds this object (or attributes of this object) into the enclosing scope. Also, modules are garanteed (with a couple caveats, but those are to be considered as error cases) to be imported only once for a given process (and then cached) so importing the same module twice in a same process will yield the same object (IOW a module is a singleton).
All this means that given something like
# module A
def foo():
return bar(42)
def bar(x):
return x * 2
and
# module B
def foo():
return bar(33)
def bar(x):
return x / 2
It's garanteed that however you import from A and B, A.foo will ALWAYS call A.bar and NEVER call B.bar and B.foo will only ever call B.bar (unless you explicitely monkeyptach them of course but that's not the point).
Also, this means that within a module you cannot have access to the importing namespace (the module or function that's importing your module), so you cannot have a module depending on "global" names set by the importer.
To make a long story short, you really need to forget about C++ and learn how Python works, as those are wildly different languages with wildly different object models, execution models and idioms. A couple interesting reads are http://effbot.org/zone/import-confusion.htm and https://nedbatchelder.com/text/names.html
EDIT 2:
(about the 'automagic' module)
I would do that based on whether the user runs mpirun or just python. However, it seems it's not possible (see for instance this or this) in a portable way without a hack. Any ideas in that direction?
I've never ever had anything to do with mpi so I can't help with this - but if the general consensus is that there's no reliable portable way to detect this then obviously there's your answer.
This being said, simple stupid solutions are sometimes overlooked. In your case, explicitly setting an environment variable or passing a command-line switch to your main script would JustWork(tm), ie the user should for example use
SOMEFLAG=serial python main.py
vs
SOMEFLAG=parallel mpirun -np4 python main.py
or
python main.py serial
vs
mpirun -np4 python main.py parallel
(whichever works best for you needs - is the most easily portable).
This of course requires a bit more documentation and some more effort from the end-user but well...
I'm not really what you're asking here. Python classes are just (callable/instantiable) objects themselves, so you can of course select and use them conditionally. If multiple classes within multiple modules are involved, you can also make the imports conditional.
if user_says_parallel:
from myPackage.parallel import ParallelObject
ObjectClass = ParallelObject
else:
from myPackage.serial import SerialObject
ObjectClass = SerialObject
my_abstract_object = ObjectClass()
If that's very useful depends on your classes and the effort it takes to make sure they have the same API so they're compatible when replacing each other. Maybe even inheritance à la ParallelObject => SerialObject is possible, or at least a common (virtual) base class to put all the shared code. But that's just the same as in C++.

How are imports in Python handled? [duplicate]

PEP 8 states:
Imports are always put at the top of the file, just after any module comments and docstrings, and before module globals and constants.
However if the class/method/function that I am importing is only used in rare cases, surely it is more efficient to do the import when it is needed?
Isn't this:
class SomeClass(object):
def not_often_called(self)
from datetime import datetime
self.datetime = datetime.now()
more efficient than this?
from datetime import datetime
class SomeClass(object):
def not_often_called(self)
self.datetime = datetime.now()
Module importing is quite fast, but not instant. This means that:
Putting the imports at the top of the module is fine, because it's a trivial cost that's only paid once.
Putting the imports within a function will cause calls to that function to take longer.
So if you care about efficiency, put the imports at the top. Only move them into a function if your profiling shows that would help (you did profile to see where best to improve performance, right??)
The best reasons I've seen to perform lazy imports are:
Optional library support. If your code has multiple paths that use different libraries, don't break if an optional library is not installed.
In the __init__.py of a plugin, which might be imported but not actually used. Examples are Bazaar plugins, which use bzrlib's lazy-loading framework.
Putting the import statement inside of a function can prevent circular dependencies.
For example, if you have 2 modules, X.py and Y.py, and they both need to import each other, this will cause a circular dependency when you import one of the modules causing an infinite loop. If you move the import statement in one of the modules then it won't try to import the other module till the function is called, and that module will already be imported, so no infinite loop. Read here for more - effbot.org/zone/import-confusion.htm
I have adopted the practice of putting all imports in the functions that use them, rather than at the top of the module.
The benefit I get is the ability to refactor more reliably. When I move a function from one module to another, I know that the function will continue to work with all of its legacy of testing intact. If I have my imports at the top of the module, when I move a function, I find that I end up spending a lot of time getting the new module's imports complete and minimal. A refactoring IDE might make this irrelevant.
There is a speed penalty as mentioned elsewhere. I have measured this in my application and found it to be insignificant for my purposes.
It is also nice to be able to see all module dependencies up front without resorting to search (e.g. grep). However, the reason I care about module dependencies is generally because I'm installing, refactoring, or moving an entire system comprising multiple files, not just a single module. In that case, I'm going to perform a global search anyway to make sure I have the system-level dependencies. So I have not found global imports to aid my understanding of a system in practice.
I usually put the import of sys inside the if __name__=='__main__' check and then pass arguments (like sys.argv[1:]) to a main() function. This allows me to use main in a context where sys has not been imported.
Most of the time this would be useful for clarity and sensible to do but it's not always the case. Below are a couple of examples of circumstances where module imports might live elsewhere.
Firstly, you could have a module with a unit test of the form:
if __name__ == '__main__':
import foo
aa = foo.xyz() # initiate something for the test
Secondly, you might have a requirement to conditionally import some different module at runtime.
if [condition]:
import foo as plugin_api
else:
import bar as plugin_api
xx = plugin_api.Plugin()
[...]
There are probably other situations where you might place imports in other parts in the code.
The first variant is indeed more efficient than the second when the function is called either zero or one times. With the second and subsequent invocations, however, the "import every call" approach is actually less efficient. See this link for a lazy-loading technique that combines the best of both approaches by doing a "lazy import".
But there are reasons other than efficiency why you might prefer one over the other. One approach is makes it much more clear to someone reading the code as to the dependencies that this module has. They also have very different failure characteristics -- the first will fail at load time if there's no "datetime" module while the second won't fail until the method is called.
Added Note: In IronPython, imports can be quite a bit more expensive than in CPython because the code is basically being compiled as it's being imported.
Curt makes a good point: the second version is clearer and will fail at load time rather than later, and unexpectedly.
Normally I don't worry about the efficiency of loading modules, since it's (a) pretty fast, and (b) mostly only happens at startup.
If you have to load heavyweight modules at unexpected times, it probably makes more sense to load them dynamically with the __import__ function, and be sure to catch ImportError exceptions, and handle them in a reasonable manner.
I wouldn't worry about the efficiency of loading the module up front too much. The memory taken up by the module won't be very big (assuming it's modular enough) and the startup cost will be negligible.
In most cases you want to load the modules at the top of the source file. For somebody reading your code, it makes it much easier to tell what function or object came from what module.
One good reason to import a module elsewhere in the code is if it's used in a debugging statement.
For example:
do_something_with_x(x)
I could debug this with:
from pprint import pprint
pprint(x)
do_something_with_x(x)
Of course, the other reason to import modules elsewhere in the code is if you need to dynamically import them. This is because you pretty much don't have any choice.
I wouldn't worry about the efficiency of loading the module up front too much. The memory taken up by the module won't be very big (assuming it's modular enough) and the startup cost will be negligible.
Here's an updated summary of the answers to this
and
related
questions.
PEP 8
recommends putting imports at the top.
It's often more convenient to get
ImportErrors
when you first run your program
rather than when your program first calls your function.
Putting imports in the function scope
can help avoid issues with circular imports.
Putting imports in the function scope
helps keep maintain a clean module namespace,
so that it does not appear among tab-completion suggestions.
Start-up time:
imports in a function won't run until (if) that function is called.
Might get significant with heavy-weight libraries.
Even though import statements are super fast on subsequent runs,
they still incur a speed penalty
which can be significant if the function is trivial but frequently in use.
Imports under the __name__ == "__main__" guard seem very reasonable.
Refactoring
might be easier if the imports are located in the function
where they're used (facilitates moving it to another module).
It can also be argued that this is good for readability.
However, most would argue the contrary, i.e.
Imports at the top enhance readability,
since you can see all your dependencies at a glance.
It seems unclear if dynamic or conditional imports favour one style over another.
I was surprised not to see actual cost numbers for the repeated load-checks posted already, although there are many good explanations of what to expect.
If you import at the top, you take the load hit no matter what. That's pretty small, but commonly in the milliseconds, not nanoseconds.
If you import within a function(s), then you only take the hit for loading if and when one of those functions is first called. As many have pointed out, if that doesn't happen at all, you save the load time. But if the function(s) get called a lot, you take a repeated though much smaller hit (for checking that it has been loaded; not for actually re-loading). On the other hand, as #aaronasterling pointed out you also save a little because importing within a function lets the function use slightly-faster local variable lookups to identify the name later (http://stackoverflow.com/questions/477096/python-import-coding-style/4789963#4789963).
Here are the results of a simple test that imports a few things from inside a function. The times reported (in Python 2.7.14 on a 2.3 GHz Intel Core i7) are shown below (the 2nd call taking more than later calls seems consistent, though I don't know why).
0 foo: 14429.0924 µs
1 foo: 63.8962 µs
2 foo: 10.0136 µs
3 foo: 7.1526 µs
4 foo: 7.8678 µs
0 bar: 9.0599 µs
1 bar: 6.9141 µs
2 bar: 7.1526 µs
3 bar: 7.8678 µs
4 bar: 7.1526 µs
The code:
from __future__ import print_function
from time import time
def foo():
import collections
import re
import string
import math
import subprocess
return
def bar():
import collections
import re
import string
import math
import subprocess
return
t0 = time()
for i in xrange(5):
foo()
t1 = time()
print(" %2d foo: %12.4f \xC2\xB5s" % (i, (t1-t0)*1E6))
t0 = t1
for i in xrange(5):
bar()
t1 = time()
print(" %2d bar: %12.4f \xC2\xB5s" % (i, (t1-t0)*1E6))
t0 = t1
It's a tradeoff, that only the programmer can decide to make.
Case 1 saves some memory and startup time by not importing the datetime module (and doing whatever initialization it might require) until needed. Note that doing the import 'only when called' also means doing it 'every time when called', so each call after the first one is still incurring the additional overhead of doing the import.
Case 2 save some execution time and latency by importing datetime beforehand so that not_often_called() will return more quickly when it is called, and also by not incurring the overhead of an import on every call.
Besides efficiency, it's easier to see module dependencies up front if the import statements are ... up front. Hiding them down in the code can make it more difficult to easily find what modules something depends on.
Personally I generally follow the PEP except for things like unit tests and such that I don't want always loaded because I know they aren't going to be used except for test code.
Here's an example where all the imports are at the very top (this is the only time I've needed to do this). I want to be able to terminate a subprocess on both Un*x and Windows.
import os
# ...
try:
kill = os.kill # will raise AttributeError on Windows
from signal import SIGTERM
def terminate(process):
kill(process.pid, SIGTERM)
except (AttributeError, ImportError):
try:
from win32api import TerminateProcess # use win32api if available
def terminate(process):
TerminateProcess(int(process._handle), -1)
except ImportError:
def terminate(process):
raise NotImplementedError # define a dummy function
(On review: what John Millikin said.)
This is like many other optimizations - you sacrifice some readability for speed. As John mentioned, if you've done your profiling homework and found this to be a significantly useful enough change and you need the extra speed, then go for it. It'd probably be good to put a note up with all the other imports:
from foo import bar
from baz import qux
# Note: datetime is imported in SomeClass below
Module initialization only occurs once - on the first import. If the module in question is from the standard library, then you will likely import it from other modules in your program as well. For a module as prevalent as datetime, it is also likely a dependency for a slew of other standard libraries. The import statement would cost very little then since the module intialization would have happened already. All it is doing at this point is binding the existing module object to the local scope.
Couple that information with the argument for readability and I would say that it is best to have the import statement at module scope.
Just to complete Moe's answer and the original question:
When we have to deal with circular dependences we can do some "tricks". Assuming we're working with modules a.py and b.py that contain x() and b y(), respectively. Then:
We can move one of the from imports at the bottom of the module.
We can move one of the from imports inside the function or method that is actually requiring the import (this isn't always possible, as you may use it from several places).
We can change one of the two from imports to be an import that looks like: import a
So, to conclude. If you aren't dealing with circular dependencies and doing some kind of trick to avoid them, then it's better to put all your imports at the top because of the reasons already explained in other answers to this question. And please, when doing this "tricks" include a comment, it's always welcome! :)
In addition to the excellent answers already given, it's worth noting that the placement of imports is not merely a matter of style. Sometimes a module has implicit dependencies that need to be imported or initialized first, and a top-level import could lead to violations of the required order of execution.
This issue often comes up in Apache Spark's Python API, where you need to initialize the SparkContext before importing any pyspark packages or modules. It's best to place pyspark imports in a scope where the SparkContext is guaranteed to be available.
I do not aspire to provide complete answer, because others have already done this very well. I just want to mention one use case when I find especially useful to import modules inside functions. My application uses python packages and modules stored in certain location as plugins. During application startup, the application walks through all the modules in the location and imports them, then it looks inside the modules and if it finds some mounting points for the plugins (in my case it is a subclass of a certain base class having a unique ID) it registers them. The number of plugins is large (now dozens, but maybe hundreds in the future) and each of them is used quite rarely. Having imports of third party libraries at the top of my plugin modules was a bit penalty during application startup. Especially some thirdparty libraries are heavy to import (e.g. import of plotly even tries to connect to internet and download something which was adding about one second to startup). By optimizing imports (calling them only in the functions where they are used) in the plugins I managed to shrink the startup from 10 seconds to some 2 seconds. That is a big difference for my users.
So my answer is no, do not always put the imports at the top of your modules.
It's interesting that not a single answer mentioned parallel processing so far, where it might be REQUIRED that the imports are in the function, when the serialized function code is what is being pushed around to other cores, e.g. like in the case of ipyparallel.
Readability
In addition to startup performance, there is a readability argument to be made for localizing import statements. For example take python line numbers 1283 through 1296 in my current first python project:
listdata.append(['tk font version', font_version])
listdata.append(['Gtk version', str(Gtk.get_major_version())+"."+
str(Gtk.get_minor_version())+"."+
str(Gtk.get_micro_version())])
import xml.etree.ElementTree as ET
xmltree = ET.parse('/usr/share/gnome/gnome-version.xml')
xmlroot = xmltree.getroot()
result = []
for child in xmlroot:
result.append(child.text)
listdata.append(['Gnome version', result[0]+"."+result[1]+"."+
result[2]+" "+result[3]])
If the import statement was at the top of file I would have to scroll up a long way, or press Home, to find out what ET was. Then I would have to navigate back to line 1283 to continue reading code.
Indeed even if the import statement was at the top of the function (or class) as many would place it, paging up and back down would be required.
Displaying the Gnome version number will rarely be done so the import at top of file introduces unnecessary startup lag.
There can be a performance gain by importing variables/local scoping inside of a function. This depends on the usage of the imported thing inside the function. If you are looping many times and accessing a module global object, importing it as local can help.
test.py
X=10
Y=11
Z=12
def add(i):
i = i + 10
runlocal.py
from test import add, X, Y, Z
def callme():
x=X
y=Y
z=Z
ladd=add
for i in range(100000000):
ladd(i)
x+y+z
callme()
run.py
from test import add, X, Y, Z
def callme():
for i in range(100000000):
add(i)
X+Y+Z
callme()
A time on Linux shows a small gain
/usr/bin/time -f "\t%E real,\t%U user,\t%S sys" python run.py
0:17.80 real, 17.77 user, 0.01 sys
/tmp/test$ /usr/bin/time -f "\t%E real,\t%U user,\t%S sys" python runlocal.py
0:14.23 real, 14.22 user, 0.01 sys
real is wall clock. user is time in program. sys is time for system calls.
https://docs.python.org/3.5/reference/executionmodel.html#resolution-of-names
I would like to mention a usecase of mine, very similar to those mentioned by #John Millikin and #V.K.:
Optional Imports
I do data analysis with Jupyter Notebook, and I use the same IPython notebook as a template for all analyses. In some occasions, I need to import Tensorflow to do some quick model runs, but sometimes I work in places where tensorflow isn't set up / is slow to import. In those cases, I encapsulate my Tensorflow-dependent operations in a helper function, import tensorflow inside that function, and bind it to a button.
This way, I could do "restart-and-run-all" without having to wait for the import, or having to resume the rest of the cells when it fails.
While PEP encourages importing at the top of a module, it isn't an error to import at other levels. That indicates imports should be at the top, however there are exceptions.
It is a micro-optimization to load modules when they are used. Code that is sluggish importing can be optimized later if it makes a sizable difference.
Still, you might introduce flags to conditionally import at as near to the top as possible, allowing a user to use configuration to import the modules they need while still importing everything immediately.
Importing as soon as possible means the program will fail if any imports (or imports of imports) are missing or have syntax errors. If all imports occur at the top of all modules then python works in two steps. Compile. Run.
Built in modules work anywhere they are imported because they are well designed. Modules you write should be the same. Moving around your imports to the top or to their first use can help ensure there are no side effects and the code is injecting dependencies.
Whether you put imports at the top or not, your code should still work when the imports are at the top. So start by importing immediately then optimize as needed.
This is a fascinating discussion. Like many others I had never even considered this topic. I got cornered into having to have the imports in the functions because of wanting to use the Django ORM in one of my libraries. I was having to call django.setup() before importing my model classes and because this was at the top of the file it was being dragged into completely non-Django library code because of the IoC injector construction.
I kind of hacked around a bit and ended up putting the django.setup() in the singleton constructor and the relevant import at the top of each class method. Now this worked fine but made me uneasy because the imports weren't at the top and also I started worrying about the extra time hit of the imports. Then I came here and read with great interest everybody's take on this.
I have a long C++ background and now use Python/Cython. My take on this is that why not put the imports in the function unless it causes you a profiled bottleneck. It's only like declaring space for variables just before you need them. The trouble is I have thousands of lines of code with all the imports at the top! So I think I will do it from now on and change the odd file here and there when I'm passing through and have the time.

Python - optimize by not importing at module level?

In a framework such as Django, I'd imagine that if a user lands on a page (running a view function called "some_page"), and you have 8 imports at the top of module that are irrelevant to that view, you're wasting cycles on those imports. My questions are:
Is it a large enough amount of resources to make an impact on a high-traffic website?
Is it such a bad practice to import inside of a function for this purpose that it should be avoided at said impact?
Note: This could be considered premature optimization, but I'm not interested in that argument. Let's assume, for the sake of practical theory, that this is a completed site with loads of traffic, needing to be optimized in every way possible, and the application code, as well as DB have been fully optimized by 50 PhD database admins and developers, and these imports are the only thing left.
No, don't do this. In a normal python execution environment on the web (mod_wsgi, gunicorn, etc.) when your process starts those imports will be executed, and then all subsequent requests will not re-execute the script. If you put the imports inside the functions they'll have to be processed every time the function is called.
Yes, it is a bad practice to import at the function level. By using smarter imports at the top of the module, you create a one time, small cost. However, if you place an import in a function you will suffer the cost of the import each time that function is run. So, rather than import in the function, just import at the top of the module.
A few things you can do to clean up and improve your imports:
Don't use wild imports e.g. from x import *
Where possible, just use a normal import e.g. import x
Try to split your code up into smaller modules that can be called separately, so that fewer imports are made
Also, placing imports at the top of the module is a matter of style. There's a reason why PEP 8 says that modules need to be imported at the top. It's far more readable and maintainable that way.
Finally, some imports at function level will cause compatibility issues in the future, as from x import * is not valid Python 3.x at function level.
1) The answer is no. Django/Python is not like PHP. Your whole module will not be reinterpreted with each pageview like happens with PHP includes. The module will be in memory and each page view will make a simple function call to your view.
2) Yes, it will be a counter-optimization to make imports at the view level.
No. Same reason as other answers.
Yes. Same reason as other answes.
BTW, you can also do import lazily.
For example, Importing toolkit can "import" a module in top level code, but the module is not actually loaded until one of the attributes is accessed.
Sometimes following boiler-plate makes sense:
foo = None
def foorify():
global foo
if not foo: from xxx import foo
foo.bar()
This makes sense when foorification is conditional on something that rarely changes, e.g. one server foorifies while another never does or if you don't want or cannot safely import foo during application startup or most tests.

Does python import all the listed libraries?

I'm just wondering, I often have really long python files and imports tend to stack quite quickly.
PEP8 says that the imports should always be written at the beginning of the file.
Do all the imported libraries get imported when calling a function coded in the file? Or do only the necessary libraries get called?
Does it make sense to worry about this? Is there no reason to import libraries within the functions or classes that need them?
Every time Python hits an import statement, it checks to see if that module has already been imported, and if not, imports it. So the imports at the top of your file will happen as soon as your file is run or imported by another module.
There is some overhead to this, so it's generally best to keep imports at the top of your file so that cost gets taken care of up front.
The best place for imports is at the top of your file. That documents the dependencies in one place and makes errors from their absence appear earlier. The import itself actually occurs at the time of the import statement, but this seldom matters much.
It is not typical that you have anything to gain by not importing a library until you are in a function or method that needs it. (There is never anything to gain by doing so inside the body of a class.) It is rare that you want optional dependencies and even rarer that this is the right technique to get them, though. Perhaps you can share a compelling use case?
Does it make sense to worry about
this?
No
There no reason to import libraries within the functions or classes that need them.
It's just slow because the import statement has to check to see if it's been imported once, and realize that it has been imported.
If you put this in a function that's called frequently, you can waste some time with all the import checking.
Imports happen when the module that contains the imports gets executed or imported, not when the functions are called.
Ordinarily, I wouldn't worry about it. If you are encountering slowdowns, you might profile to see if your problem is related to this. If it is, you can check to see if your module can divided up into smaller modules.
But if all the files are getting used by the same program, you'll just end up importing everything anyway.
If a function inside a module is the only one to import a given other module (say you have a function sending tweets, only if some configuration option is on), then it makes sense to import that specific module in the function.
Unless I see some profiling data proving otherwise, my guess is that the overhead of an import statement in a function is completely negligible.

Should import statements always be at the top of a module?

PEP 8 states:
Imports are always put at the top of the file, just after any module comments and docstrings, and before module globals and constants.
However if the class/method/function that I am importing is only used in rare cases, surely it is more efficient to do the import when it is needed?
Isn't this:
class SomeClass(object):
def not_often_called(self)
from datetime import datetime
self.datetime = datetime.now()
more efficient than this?
from datetime import datetime
class SomeClass(object):
def not_often_called(self)
self.datetime = datetime.now()
Module importing is quite fast, but not instant. This means that:
Putting the imports at the top of the module is fine, because it's a trivial cost that's only paid once.
Putting the imports within a function will cause calls to that function to take longer.
So if you care about efficiency, put the imports at the top. Only move them into a function if your profiling shows that would help (you did profile to see where best to improve performance, right??)
The best reasons I've seen to perform lazy imports are:
Optional library support. If your code has multiple paths that use different libraries, don't break if an optional library is not installed.
In the __init__.py of a plugin, which might be imported but not actually used. Examples are Bazaar plugins, which use bzrlib's lazy-loading framework.
Putting the import statement inside of a function can prevent circular dependencies.
For example, if you have 2 modules, X.py and Y.py, and they both need to import each other, this will cause a circular dependency when you import one of the modules causing an infinite loop. If you move the import statement in one of the modules then it won't try to import the other module till the function is called, and that module will already be imported, so no infinite loop. Read here for more - effbot.org/zone/import-confusion.htm
I have adopted the practice of putting all imports in the functions that use them, rather than at the top of the module.
The benefit I get is the ability to refactor more reliably. When I move a function from one module to another, I know that the function will continue to work with all of its legacy of testing intact. If I have my imports at the top of the module, when I move a function, I find that I end up spending a lot of time getting the new module's imports complete and minimal. A refactoring IDE might make this irrelevant.
There is a speed penalty as mentioned elsewhere. I have measured this in my application and found it to be insignificant for my purposes.
It is also nice to be able to see all module dependencies up front without resorting to search (e.g. grep). However, the reason I care about module dependencies is generally because I'm installing, refactoring, or moving an entire system comprising multiple files, not just a single module. In that case, I'm going to perform a global search anyway to make sure I have the system-level dependencies. So I have not found global imports to aid my understanding of a system in practice.
I usually put the import of sys inside the if __name__=='__main__' check and then pass arguments (like sys.argv[1:]) to a main() function. This allows me to use main in a context where sys has not been imported.
Most of the time this would be useful for clarity and sensible to do but it's not always the case. Below are a couple of examples of circumstances where module imports might live elsewhere.
Firstly, you could have a module with a unit test of the form:
if __name__ == '__main__':
import foo
aa = foo.xyz() # initiate something for the test
Secondly, you might have a requirement to conditionally import some different module at runtime.
if [condition]:
import foo as plugin_api
else:
import bar as plugin_api
xx = plugin_api.Plugin()
[...]
There are probably other situations where you might place imports in other parts in the code.
The first variant is indeed more efficient than the second when the function is called either zero or one times. With the second and subsequent invocations, however, the "import every call" approach is actually less efficient. See this link for a lazy-loading technique that combines the best of both approaches by doing a "lazy import".
But there are reasons other than efficiency why you might prefer one over the other. One approach is makes it much more clear to someone reading the code as to the dependencies that this module has. They also have very different failure characteristics -- the first will fail at load time if there's no "datetime" module while the second won't fail until the method is called.
Added Note: In IronPython, imports can be quite a bit more expensive than in CPython because the code is basically being compiled as it's being imported.
Curt makes a good point: the second version is clearer and will fail at load time rather than later, and unexpectedly.
Normally I don't worry about the efficiency of loading modules, since it's (a) pretty fast, and (b) mostly only happens at startup.
If you have to load heavyweight modules at unexpected times, it probably makes more sense to load them dynamically with the __import__ function, and be sure to catch ImportError exceptions, and handle them in a reasonable manner.
I wouldn't worry about the efficiency of loading the module up front too much. The memory taken up by the module won't be very big (assuming it's modular enough) and the startup cost will be negligible.
In most cases you want to load the modules at the top of the source file. For somebody reading your code, it makes it much easier to tell what function or object came from what module.
One good reason to import a module elsewhere in the code is if it's used in a debugging statement.
For example:
do_something_with_x(x)
I could debug this with:
from pprint import pprint
pprint(x)
do_something_with_x(x)
Of course, the other reason to import modules elsewhere in the code is if you need to dynamically import them. This is because you pretty much don't have any choice.
I wouldn't worry about the efficiency of loading the module up front too much. The memory taken up by the module won't be very big (assuming it's modular enough) and the startup cost will be negligible.
Here's an updated summary of the answers to this
and
related
questions.
PEP 8
recommends putting imports at the top.
It's often more convenient to get
ImportErrors
when you first run your program
rather than when your program first calls your function.
Putting imports in the function scope
can help avoid issues with circular imports.
Putting imports in the function scope
helps keep maintain a clean module namespace,
so that it does not appear among tab-completion suggestions.
Start-up time:
imports in a function won't run until (if) that function is called.
Might get significant with heavy-weight libraries.
Even though import statements are super fast on subsequent runs,
they still incur a speed penalty
which can be significant if the function is trivial but frequently in use.
Imports under the __name__ == "__main__" guard seem very reasonable.
Refactoring
might be easier if the imports are located in the function
where they're used (facilitates moving it to another module).
It can also be argued that this is good for readability.
However, most would argue the contrary, i.e.
Imports at the top enhance readability,
since you can see all your dependencies at a glance.
It seems unclear if dynamic or conditional imports favour one style over another.
I was surprised not to see actual cost numbers for the repeated load-checks posted already, although there are many good explanations of what to expect.
If you import at the top, you take the load hit no matter what. That's pretty small, but commonly in the milliseconds, not nanoseconds.
If you import within a function(s), then you only take the hit for loading if and when one of those functions is first called. As many have pointed out, if that doesn't happen at all, you save the load time. But if the function(s) get called a lot, you take a repeated though much smaller hit (for checking that it has been loaded; not for actually re-loading). On the other hand, as #aaronasterling pointed out you also save a little because importing within a function lets the function use slightly-faster local variable lookups to identify the name later (http://stackoverflow.com/questions/477096/python-import-coding-style/4789963#4789963).
Here are the results of a simple test that imports a few things from inside a function. The times reported (in Python 2.7.14 on a 2.3 GHz Intel Core i7) are shown below (the 2nd call taking more than later calls seems consistent, though I don't know why).
0 foo: 14429.0924 µs
1 foo: 63.8962 µs
2 foo: 10.0136 µs
3 foo: 7.1526 µs
4 foo: 7.8678 µs
0 bar: 9.0599 µs
1 bar: 6.9141 µs
2 bar: 7.1526 µs
3 bar: 7.8678 µs
4 bar: 7.1526 µs
The code:
from __future__ import print_function
from time import time
def foo():
import collections
import re
import string
import math
import subprocess
return
def bar():
import collections
import re
import string
import math
import subprocess
return
t0 = time()
for i in xrange(5):
foo()
t1 = time()
print(" %2d foo: %12.4f \xC2\xB5s" % (i, (t1-t0)*1E6))
t0 = t1
for i in xrange(5):
bar()
t1 = time()
print(" %2d bar: %12.4f \xC2\xB5s" % (i, (t1-t0)*1E6))
t0 = t1
It's a tradeoff, that only the programmer can decide to make.
Case 1 saves some memory and startup time by not importing the datetime module (and doing whatever initialization it might require) until needed. Note that doing the import 'only when called' also means doing it 'every time when called', so each call after the first one is still incurring the additional overhead of doing the import.
Case 2 save some execution time and latency by importing datetime beforehand so that not_often_called() will return more quickly when it is called, and also by not incurring the overhead of an import on every call.
Besides efficiency, it's easier to see module dependencies up front if the import statements are ... up front. Hiding them down in the code can make it more difficult to easily find what modules something depends on.
Personally I generally follow the PEP except for things like unit tests and such that I don't want always loaded because I know they aren't going to be used except for test code.
Here's an example where all the imports are at the very top (this is the only time I've needed to do this). I want to be able to terminate a subprocess on both Un*x and Windows.
import os
# ...
try:
kill = os.kill # will raise AttributeError on Windows
from signal import SIGTERM
def terminate(process):
kill(process.pid, SIGTERM)
except (AttributeError, ImportError):
try:
from win32api import TerminateProcess # use win32api if available
def terminate(process):
TerminateProcess(int(process._handle), -1)
except ImportError:
def terminate(process):
raise NotImplementedError # define a dummy function
(On review: what John Millikin said.)
This is like many other optimizations - you sacrifice some readability for speed. As John mentioned, if you've done your profiling homework and found this to be a significantly useful enough change and you need the extra speed, then go for it. It'd probably be good to put a note up with all the other imports:
from foo import bar
from baz import qux
# Note: datetime is imported in SomeClass below
Module initialization only occurs once - on the first import. If the module in question is from the standard library, then you will likely import it from other modules in your program as well. For a module as prevalent as datetime, it is also likely a dependency for a slew of other standard libraries. The import statement would cost very little then since the module intialization would have happened already. All it is doing at this point is binding the existing module object to the local scope.
Couple that information with the argument for readability and I would say that it is best to have the import statement at module scope.
Just to complete Moe's answer and the original question:
When we have to deal with circular dependences we can do some "tricks". Assuming we're working with modules a.py and b.py that contain x() and b y(), respectively. Then:
We can move one of the from imports at the bottom of the module.
We can move one of the from imports inside the function or method that is actually requiring the import (this isn't always possible, as you may use it from several places).
We can change one of the two from imports to be an import that looks like: import a
So, to conclude. If you aren't dealing with circular dependencies and doing some kind of trick to avoid them, then it's better to put all your imports at the top because of the reasons already explained in other answers to this question. And please, when doing this "tricks" include a comment, it's always welcome! :)
In addition to the excellent answers already given, it's worth noting that the placement of imports is not merely a matter of style. Sometimes a module has implicit dependencies that need to be imported or initialized first, and a top-level import could lead to violations of the required order of execution.
This issue often comes up in Apache Spark's Python API, where you need to initialize the SparkContext before importing any pyspark packages or modules. It's best to place pyspark imports in a scope where the SparkContext is guaranteed to be available.
I do not aspire to provide complete answer, because others have already done this very well. I just want to mention one use case when I find especially useful to import modules inside functions. My application uses python packages and modules stored in certain location as plugins. During application startup, the application walks through all the modules in the location and imports them, then it looks inside the modules and if it finds some mounting points for the plugins (in my case it is a subclass of a certain base class having a unique ID) it registers them. The number of plugins is large (now dozens, but maybe hundreds in the future) and each of them is used quite rarely. Having imports of third party libraries at the top of my plugin modules was a bit penalty during application startup. Especially some thirdparty libraries are heavy to import (e.g. import of plotly even tries to connect to internet and download something which was adding about one second to startup). By optimizing imports (calling them only in the functions where they are used) in the plugins I managed to shrink the startup from 10 seconds to some 2 seconds. That is a big difference for my users.
So my answer is no, do not always put the imports at the top of your modules.
It's interesting that not a single answer mentioned parallel processing so far, where it might be REQUIRED that the imports are in the function, when the serialized function code is what is being pushed around to other cores, e.g. like in the case of ipyparallel.
Readability
In addition to startup performance, there is a readability argument to be made for localizing import statements. For example take python line numbers 1283 through 1296 in my current first python project:
listdata.append(['tk font version', font_version])
listdata.append(['Gtk version', str(Gtk.get_major_version())+"."+
str(Gtk.get_minor_version())+"."+
str(Gtk.get_micro_version())])
import xml.etree.ElementTree as ET
xmltree = ET.parse('/usr/share/gnome/gnome-version.xml')
xmlroot = xmltree.getroot()
result = []
for child in xmlroot:
result.append(child.text)
listdata.append(['Gnome version', result[0]+"."+result[1]+"."+
result[2]+" "+result[3]])
If the import statement was at the top of file I would have to scroll up a long way, or press Home, to find out what ET was. Then I would have to navigate back to line 1283 to continue reading code.
Indeed even if the import statement was at the top of the function (or class) as many would place it, paging up and back down would be required.
Displaying the Gnome version number will rarely be done so the import at top of file introduces unnecessary startup lag.
There can be a performance gain by importing variables/local scoping inside of a function. This depends on the usage of the imported thing inside the function. If you are looping many times and accessing a module global object, importing it as local can help.
test.py
X=10
Y=11
Z=12
def add(i):
i = i + 10
runlocal.py
from test import add, X, Y, Z
def callme():
x=X
y=Y
z=Z
ladd=add
for i in range(100000000):
ladd(i)
x+y+z
callme()
run.py
from test import add, X, Y, Z
def callme():
for i in range(100000000):
add(i)
X+Y+Z
callme()
A time on Linux shows a small gain
/usr/bin/time -f "\t%E real,\t%U user,\t%S sys" python run.py
0:17.80 real, 17.77 user, 0.01 sys
/tmp/test$ /usr/bin/time -f "\t%E real,\t%U user,\t%S sys" python runlocal.py
0:14.23 real, 14.22 user, 0.01 sys
real is wall clock. user is time in program. sys is time for system calls.
https://docs.python.org/3.5/reference/executionmodel.html#resolution-of-names
I would like to mention a usecase of mine, very similar to those mentioned by #John Millikin and #V.K.:
Optional Imports
I do data analysis with Jupyter Notebook, and I use the same IPython notebook as a template for all analyses. In some occasions, I need to import Tensorflow to do some quick model runs, but sometimes I work in places where tensorflow isn't set up / is slow to import. In those cases, I encapsulate my Tensorflow-dependent operations in a helper function, import tensorflow inside that function, and bind it to a button.
This way, I could do "restart-and-run-all" without having to wait for the import, or having to resume the rest of the cells when it fails.
While PEP encourages importing at the top of a module, it isn't an error to import at other levels. That indicates imports should be at the top, however there are exceptions.
It is a micro-optimization to load modules when they are used. Code that is sluggish importing can be optimized later if it makes a sizable difference.
Still, you might introduce flags to conditionally import at as near to the top as possible, allowing a user to use configuration to import the modules they need while still importing everything immediately.
Importing as soon as possible means the program will fail if any imports (or imports of imports) are missing or have syntax errors. If all imports occur at the top of all modules then python works in two steps. Compile. Run.
Built in modules work anywhere they are imported because they are well designed. Modules you write should be the same. Moving around your imports to the top or to their first use can help ensure there are no side effects and the code is injecting dependencies.
Whether you put imports at the top or not, your code should still work when the imports are at the top. So start by importing immediately then optimize as needed.
This is a fascinating discussion. Like many others I had never even considered this topic. I got cornered into having to have the imports in the functions because of wanting to use the Django ORM in one of my libraries. I was having to call django.setup() before importing my model classes and because this was at the top of the file it was being dragged into completely non-Django library code because of the IoC injector construction.
I kind of hacked around a bit and ended up putting the django.setup() in the singleton constructor and the relevant import at the top of each class method. Now this worked fine but made me uneasy because the imports weren't at the top and also I started worrying about the extra time hit of the imports. Then I came here and read with great interest everybody's take on this.
I have a long C++ background and now use Python/Cython. My take on this is that why not put the imports in the function unless it causes you a profiled bottleneck. It's only like declaring space for variables just before you need them. The trouble is I have thousands of lines of code with all the imports at the top! So I think I will do it from now on and change the odd file here and there when I'm passing through and have the time.

Categories

Resources