I have a large number of entries in a file. Let me call it file A.
File A:
('aaa.dat', 'aaa.dat', 'aaa.dat')
('aaa.dat', 'aaa.dat', 'bbb.dat')
('aaa.dat', 'aaa.dat', 'ccc.dat')
I want to use these entries, line by line, in a program that would iteratively pick an entry from file A, concatenate the files in this way:
filenames = ['aaa.dat', 'aaa.dat', 'ccc.dat'] ###entry number 3
with open('out.dat', 'w') as outfile: ###the name has to be aaa-aaa-ccc.dat
for fname in filenames:
with open(fname) as infile:
outfile.write(infile.read().strip())
All I need to do is to substitute the filenames iteratively and create an output in a "aaa-aaa-aaa.dat" format. I would appreciate any help-- feeling a bit lost!
Many thanks!!!
You can retrieve and modify the file names in the following way:
import re
pattern = re.compile('\W')
with open('fnames.txt', 'r') as infile:
for line in infile:
line = (re.sub(pattern, ' ', line)).split()
# Old filenames - to concatenate contents
content = [x + '.dat' for x in line[::2]];
# New filename
new_name = ('-').join(line[::2]) + '.dat'
# Write the concatenated content to the new
# file (first read the content all at once)
with open(new_name, 'w') as outfile:
for con in content:
with open(con, 'r') as old:
new_content = old.read()
outfile.write(new_content)
This program reads your input file, here named fnames.txt with the exact structure from your post, line by line. For each line it splits the entries using a precompiled regex (precompiling regex is suitable here and should make things faster). This assumes that your filenames are only alphanumeric characters, since the regex substitutes all non-alphanumeric characters with a space.
It retrieves only 'aaa' and dat entries as a list of strings for each line and forms a new name by joining every second entry starting from 0 and adding a .dat extension to it. It joins using a - as in the post.
It then retrieves the individual file names from which it will extract the content into a list content by selecting every second entry from line.
Finally, it reads each of the files in content and writes them to the common file new_name. It reads each of them all at ones which may be a problem if these files are big and in general there may be more efficient ways of doing all this. Also, if you are planning to do more things with the content from old files before writing, consider moving the old file-specific operations to a separate function for readability and any potential debugging.
Something like this:
with open(fname) as infile, open('out.dat', 'w') as outfile:
for line in infile:
line = line.strip()
if line: # not empty
filenames = eval(line.strip()) # read tuple
filenames = [f[:-4] for f in filenames] # remove extension
filename = '-'.join(filenames) + '.dat' # make filename
outfile.write(filename + '\n') # write
If your problem is just calculating the new filenames, how about using os.path.splitext?
'-'.join([
f[0] for f in [os.path.splitext(path) for path in filenames]
]) + '.dat'
Which can be probably better understood if you see it like this:
import os
clean_fnames = []
filenames = ['aaa.dat', 'aaa.dat', 'ccc.dat']
for fname in filenames:
name, extension = os.path.splitext(fname)
clean_fnames.append(name)
name_without_ext = '-'.join(clean_fnames)
name_with_ext = name_without_ext + '.dat'
print(name_with_ext)
HOWEVER: If your issue is that you can not get the filenames in a list by reading the file line by line, you must keep in mind that when you read files, you get text (strings) NOT Python structures. You need to rebuild a list from a text like: "('aaa.dat', 'aaa.dat', 'aaa.dat')\n".
You could take a look to ast.literal_eval or try to rebuild it yourself. The code below outputs a lot of messages to show what's happening:
import pprint
collected_fnames = []
with open('./fileA.txt') as f:
for line in f:
print("Read this (literal) line: %s" % repr(line))
line_without_whitespaces_on_the_sides = line.strip()
if not line_without_whitespaces_on_the_sides:
print("line is empty... skipping")
continue
else:
line_without_parenthesis = (
line_without_whitespaces_on_the_sides
.lstrip('(')
.rstrip(')')
)
print("Cleaned parenthesis: %s" % line_without_parenthesis)
chunks = line_without_parenthesis.split(', ')
print("Collected %s chunks in a %s: %s" % (len(chunks), type(chunks), chunks))
chunks_without_quotations = [chunk.replace("'", "") for chunk in chunks]
print("Now we don't have quotations: %s" % chunks_without_quotations)
collected_fnames.append(chunks_without_quotations)
print("collected %s lines with filenames:\n%s" %
(len(collected_fnames), pprint.pformat(collected_fnames)))
I have different csv files in different directories. so i want to find specific cells in different columns that correspond to a specific date in my input.txt file.
here is what i have until now:
import glob, os, csv, numpy
import re, csv
if __name__ == '__main__':
Input=open('Input.txt','r');
output = []
for i, line in enumerate(Input):
if i==0:
header_Input = Input.readline().replace('\n','').split(',');
else:
date_input = Input.readline().replace('\n','').split(',');
a=os.walk("path to the directory")
[x[0] for x in os.walk("path to the directory")]
print(a)
b=next(os.walk('.'))[1] # immediate child directories.
for dirname, dirnames, filenames in os.walk('.'):
# print path to all subdirectories first.
for subdirname in dirnames:
print(os.path.join(dirname, subdirname))
# print path to all filenames.
for filename in filenames:
#print(os.path.join(dirname, filename))
csvfile = 'csv_file'
if csvfile in filename:
print(os.path.join(dirname, filename))
Now I have the csv files, so i need to find the date_input in every file, and print the line that contains all the information. Or if possible, to get only the cells that are in the columns with header == header_input.
This is not intended to be a full answer to your question. But you may want to consider replacing
for i, line in enumerate(Input):
if i==0:
header_Input = Input.readline().replace('\n','').split(',');
else:
date_input = Input.readline().replace('\n','').split(',');
with
header_Input = Input.readline().strip().split(',')
date_input = Input.readline().strip().split(',')
The enumerate(Input) expression reads lines from the file, and so do calls to readline() in the loop body. This will most likely result in some unfortunate results like reading alternating lines from the file.
The strip() method removes whitespace from the start and end of the line. Alternatively you may want to know that s[:-1] strips off the last character of s.
I'm trying to write a function which will find similar files by a name (song.mp3, song1.mp3, (1)song.mp3) in a specified folder. What I have by now:
def print_duplicates(source):
files_list = []
new_list = []
for dirpath, dirnames, filenames in os.walk(source):
for fname in filenames:
if ('\w*' + fname + '\w*') in files_list:
new_list.append(os.path.join(dirpath, fname))
else:
files_list.append(fname)
for a in new_list:
print(a)
If the filename wasn't before in files_list it will be added, if it was than it will be added to new_list with its path. This way I have list of 'duplicate' files. However it's not working, the new_list remains empty.
Could you correct my mistakes? Which part of my code is wrong?
If you want to use regex in your code, you need to use re module.
So change this line,
if ('\w*' + fname + '\w*') in files_list:
to,
if re.search(r'\w*' + fname + r'\w*', files_list):
which is exactly same as,
if fname in file_list:
because \w* means zero or more word characters. And I think you want to use word boundaries.
if re.search(r'\b' + fname + r'\b', files_list):
I have a folder filled with text files that all have names similar to these:
2014521RNC Reax to Obama on VA.txt
2014520W.H. Evades Questions On When Obama.txt
2012517Updated Research/ Obama Vets Roll Out.txt
So digits and then letters and/or characters. In each text file, there are words. I'm trying to write a script that will take the first string of digits and add that to a csv in a column titled "date." Then it should take the letters and/or characters after the digits and put those in a column titled "title." And then it should take the text inside the file and add that to a column titled "content." I got kind of far but not the whole cigar. When I run the script below, date = -1 and title = -1 for all of them. What have I don't wrong?
f = open('RNC.csv','w')
names = ['date', 'title', 'content']
dw = csv.DictWriter(f, names)
dw.writerow({k:k for k in names})
for root, dirnames, filenames in os.walk('.'):
for filename in filenames:
if not filename.endswith('.txt'):
continue
title = filename.find(r'\D*')
date = filename.find(r'^\d*')
open_doc = open(root + '/' + filename, 'r')
content = open_doc.read().rstrip()
open_doc.close()
dw.writerow({'date':date, 'title':title, 'content':content})
f.close()
The problem is that filename.find(s) returns the position of the substring s in filename. It returns -1 when the substring isn't found.
You can use a regex to perform the matching instead:
import re
for filename in filenames:
m = re.match("\A(\d+)(.*)\.txt\Z", filename)
if m:
date = m.group(1)
title = m.group(2)
...
You can't supply regular expressions as parameters to the str.find method, which would interpret them as literal substrings to try to find in the filename. Probably what you need to do is something like this (after adding import re to the top of your script):
match = re.search(r'^(\d+)', filename)
date = match.group(1) if match else 'None'
match = re.search(r'(\D+)', filename)
title = match.group(1) if match else 'None'
I compare two text files and print out the results to a 3rd file. I am trying to make it so the script i'm running would iterate over all of the folders that have two text files in them, in the CWD of the script.
What i have so far:
import os
import glob
path = './'
for infile in glob.glob( os.path.join(path, '*.*') ):
print('current file is: ' + infile)
with open (f1+'.txt', 'r') as fin1, open(f2+'.txt', 'r') as fin2:
Would this be a good way to start the iteration process?
It's not the most clear code but it gets the job done. However, i'm pretty sure i need to take the logic out of the read / write methods but i'm not sure where to start.
What i'm basically trying to do is have a script iterate over all of the folders in its CWD, open each folder, compare the two text files inside, write a 3rd text file to the same folder, then move on to the next.
Another method i have tried is as follows:
import os
rootDir = 'C:\\Python27\\test'
for dirName, subdirList, fileList in os.walk(rootDir):
print('Found directory: %s' % dirName)
for fname in fileList:
print('\t%s' % fname)
And this outputs the following (to give you a better example of the file structure:
Found directory: C:\Python27\test
test.py
Found directory: C:\Python27\test\asdd
asd1.txt
asd2.txt
Found directory: C:\Python27\test\chro
ch1.txt
ch2.txt
Found directory: C:\Python27\test\hway
hw1.txt
hw2.txt
Would it be wise to put the compare logic under the for fname in fileList? How do i make sure it compares the two text files inside the specific folder and not with other fnames in the fileList?
This is the full code that i am trying to add this functionality into. I appologize for the Frankenstein nature of it but i am still working on a refined version but it does not work yet.
from collections import defaultdict
from operator import itemgetter
from itertools import groupby
from collections import deque
import os
class avs_auto:
def load_and_compare(self, input_file1, input_file2, output_file1, output_file2, result_file):
self.load(input_file1, input_file2, output_file1, output_file2)
self.compare(output_file1, output_file2)
self.final(result_file)
def load(self, fileIn1, fileIn2, fileOut1, fileOut2):
with open(fileIn1+'.txt') as fin1, open(fileIn2+'.txt') as fin2:
frame_rects = defaultdict(list)
for row in (map(str, line.split()) for line in fin1):
id, frame, rect = row[0], row[2], [row[3],row[4],row[5],row[6]]
frame_rects[frame].append(id)
frame_rects[frame].append(rect)
frame_rects2 = defaultdict(list)
for row in (map(str, line.split()) for line in fin2):
id, frame, rect = row[0], row[2], [row[3],row[4],row[5],row[6]]
frame_rects2[frame].append(id)
frame_rects2[frame].append(rect)
with open(fileOut1+'.txt', 'w') as fout1, open(fileOut2+'.txt', 'w') as fout2:
for frame, rects in sorted(frame_rects.iteritems()):
fout1.write('{{{}:{}}}\n'.format(frame, rects))
for frame, rects in sorted(frame_rects2.iteritems()):
fout2.write('{{{}:{}}}\n'.format(frame, rects))
def compare(self, fileOut1, fileOut2):
with open(fileOut1+'.txt', 'r') as fin1:
with open(fileOut2+'.txt', 'r') as fin2:
lines1 = fin1.readlines()
lines2 = fin2.readlines()
diff_lines = [l.strip() for l in lines1 if l not in lines2]
diffs = defaultdict(list)
with open(fileOut1+'x'+fileOut2+'.txt', 'w') as result_file:
for line in diff_lines:
d = eval(line)
for k in d:
list_ids = d[k]
for i in range(0, len(d[k]), 2):
diffs[d[k][i]].append(k)
for id_ in diffs:
diffs[id_].sort()
for k, g in groupby(enumerate(diffs[id_]), lambda (i, x): i - x):
group = map(itemgetter(1), g)
result_file.write('{0} {1} {2}\n'.format(id_, group[0], group[-1]))
def final(self, result_file):
with open(result_file+'.txt', 'r') as fin:
lines = (line.split() for line in fin)
for k, g in groupby(lines, itemgetter(0)):
fst = next(g)
lst = next(iter(deque(g, 1)), fst)
with open('final/{}.avs'.format(k), 'w') as fout:
fout.write('video0=ImageSource("old\%06d.jpeg", {}-3, {}+3, 15)\n'.format(fst[1], lst[2]))
fout.write('video1=ImageSource("new\%06d.jpeg", {}-3, {}+3, 15)\n'.format(fst[1], lst[2]))
fout.write('video0=BilinearResize(video0,640,480)\n')
fout.write('video1=BilinearResize(video1,640,480)\n')
fout.write('StackHorizontal(video0,video1)\n')
fout.write('Subtitle("ID: {}", font="arial", size=30, align=8)'.format(k))
using the load_and_compare() function, i define two input text files, two output text files, a file for the comparison results and a final phase that writes many files for all of the differences.
What i am trying to do is have this whole class run on the current working directory and go through every sub folder, compare the two text files, and write everything into the same folder, specifically the final() results.
You can indeed use os.walk(), since that already separates the directories from the files. You only need the directories it returns, because that's where you're looking for your 2 specific files.
You could also use os.listdir() but that returns directories as well files in the same list, so you would have to check for directories yourself.
Either way, once you have the directories, you iterate over them (for subdir in dirnames) and join the various path components you have: The dirpath, the subdir name that you got from iterating over the list and your filename.
Assuming there are also some directories that don't have the specific 2 files, it's a good idea to wrap the open() calls in a try..except block and thus ignore the directories where one of the files (or both of them) doesn't exist.
Finally, if you used os.walk(), you can easily choose if you only want to go into directories one level deep or walk the whole depth of the tree. In the former case, you just clear the dirnames list by dirnames[:] = []. Note that dirnames = [] wouldn't work, since that would just create a new empty list and put that reference into the variable instead of clearing the old list.
Replace the print("do something ...") with your program logic.
#!/usr/bin/env python
import errno
import os
f1 = "test1"
f2 = "test2"
path = "."
for dirpath, dirnames, _ in os.walk(path):
for subdir in dirnames:
filepath1, filepath2 = [os.path.join(dirpath, subdir, f + ".txt") for f in f1, f2]
try:
with open(filepath1, 'r') as fin1, open(filepath2, 'r') as fin2:
print("do something with " + str(fin1) + " and " + str(fin2))
except IOError as e:
# ignore directiories that don't contain the 2 files
if e.errno != errno.ENOENT:
# reraise exception if different from "file or directory doesn't exist"
raise
# comment the next line out if you want to traverse all subsubdirectories
dirnames[:] = []
Edit:
Based on your comments, I hope I understand your question better now.
Try the following code snippet instead. The overall structure stays the same, only now I'm using the returned filenames of os.walk(). Unfortunately, that would also make it harder to do something like "go only into the subdirectories 1 level deep", so I hope walking the tree recursively is fine with you. If not, I'll have to add a little code to later.
#!/usr/bin/env python
import fnmatch
import os
filter_pattern = "*.txt"
path = "."
for dirpath, dirnames, filenames in os.walk(path):
# comment this out if you don't want to filter
filenames = [fn for fn in filenames if fnmatch.fnmatch(fn, filter_pattern)]
if len(filenames) == 2:
# comment this out if you don't want the 2 filenames to be sorted
filenames.sort(key=str.lower)
filepath1, filepath2 = [os.path.join(dirpath, fn) for fn in filenames]
with open(filepath1, 'r') as fin1, open(filepath2, 'r') as fin2:
print("do something with " + str(fin1) + " and " + str(fin2))
I'm still not really sure what your program logic does, so you will have to interface the two yourself.
However, I noticed that you're adding the ".txt" extension to the file name explicitly all over your code, so depending on how you are going to use the snippet, you might or might not need to remove the ".txt" extension first before handing the filenames over. That would be achieved by inserting the following line after or before the sort:
filenames = [os.path.splitext(fn)[0] for fn in filenames]
Also, I still don't understand why you're using eval(). Do the text files contain python code? In any case, eval() should be avoided and be replaced by code that's more specific to the task at hand.
If it's a list of comma separated strings, use line.split(",") instead.
If there might be whitespace before or after the comma, use [word.strip() for word in line.split(",")] instead.
If it's a list of comma separated integers, use [int(num) for num in line.split(",")] instead - for floats it works analogously.
etc.