Develop Reference

matplotlib plot_surface 3D depth values

I used the following code to get the 3D depth projection of the shown 2 images. I need the max and minimum depth values, and the x and y coordinates of these max and min depth values.
Is there a function/method from which I can get this information? Even if it will be using a library other than matplotlib.
import cv2
import numpy as np
import math
import scipy.ndimage as ndimage
from matplotlib import pyplot as plt
from mpl_toolkits.mplot3d import Axes3D
image2=cv2.imread('D:/Post_Grad/STDF/iPython_notebooks/2228.jpg')
image2 = image2[:,:,1] # get the first channel
rows, cols = image2.shape
x, y= np.meshgrid(range(cols), range(rows)[::-1])
blurred = ndimage.gaussian_filter(image2,(5, 5))
fig = plt.figure(figsize=(6,6))
ax = fig.add_subplot(221)
ax.imshow(image2, cmap='gray')
ax = fig.add_subplot(222, projection='3d')
ax.elev= 5
f1=ax.plot_surface(x,y,image2, cmap=cm.jet)
ax = fig.add_subplot(223)
ax.imshow(blurred, cmap='gray')
ax = fig.add_subplot(224, projection='3d')
ax.elev= 5
f2=ax.plot_surface(x,y,blurred, cmap=cm.jet)
plt.show()

max depth and min depth are just maximum and minimum pixel values of image. And you can easily find the values via np.max(image2),np.min(image2) etc..
Also coordinates can be found via a simple function
def getCoord(image,val):
coords = []
for i in range(image.shape[0]):
for j in range(image.shape[1]):
if image[i][j] == val:
coords.append([i,j])
return coords
so getCoord(image2,np.max(image2)) will return all highest pixel coordinates in image2 (it can be more than 1) , getCoord(blurred,np.min(blurred)) will return all lowest pixel coordinates in blurred etc..

How to plot only some cells with certain values of an array and others not with matplotlib.pyplot?

I have an image that consists of float values and another one that consist only of ones and zeros. I want to plot the second image over the first one, but I only want to plot the ones from the second image. The zeros shall not be plotted.
Ì have tried the following code and I also changed the alpha of y to 1. The problem is, that either the red windows of y are changed from x (alpha of y = 0.5), or one can not even see the plots of x (alpha of y=1).
import matplotlib.pyplot as plt
import numpy as np
x = np.random.random(size=(20,20))
y = np.random.randint(2, size=(20,20))
fig = plt.figure()
plt.imshow(x, cmap="Greys", alpha = 0.5)
plt.imshow(y, cmap="Reds", alpha = 0.5)
plt.show()
How can I only plot the ones of y?
UPDATE:
Thank you for your answers! But this is not want I am looking for. I will explain again:
The result should be something like: x as background and every position, where y is 1, should be colored pure red.

Following the approach in this answer linked by #ImportanceOfBeingEarnest, the exact solution in your case would look like below. Here, np.ma.masked_where will mask your y array at places where it is 0. The resulting array will only contain 1.
EDIT: The problem of overlaying seems to stem from the choice of cmap. If you don't specify the cmap for the y, you can clearly see below that indeed only 1's are plotted and overlaid on the top of x. In order to have a discrete color (red in your case), you can create a custom color map
import matplotlib.pyplot as plt
import numpy as np
from matplotlib import colors
x = np.random.random(size=(20,20))
y = np.random.randint(2, size=(20,20))
y_new =np.ma.masked_where(y==0, y)
cmap = colors.ListedColormap(['red'])
fig = plt.figure()
plt.imshow(x, cmap="Greys", alpha = 0.5)
plt.imshow(y_new, cmap=cmap, alpha=1)
plt.show()

We can inverse "The result should be [..] x as background and every position, where y is 1, should be colored pure red.", namely to just plot x, masked by y and set the background to red.
import matplotlib.pyplot as plt
import numpy as np
y = np.random.randint(2, size=(20,20))
x = np.random.random(size=(20,20))
X = np.ma.array(x, mask=y)
fig = plt.figure()
plt.imshow(X, cmap="Greys")
plt.gca().set_facecolor("red")
plt.show()
There are of course related Q&As like
Matplotlib imshow: how to apply a mask on the matrix or
How can I plot NaN values as a special color with imshow in matplotlib?
and there is also an example on the matplotlib page: Image masked

Add color scale to matplotlib colorbar according to RGBA image channels

I am trying to plot a RGBA image with a colorbar representing color values.
The RGBA image is generated from raw data, transforming the 2d data array into a 6d-array with x, y, [R, G, B and A] according to the color input. E.g. 'green' will make it fill just the G channel with the values from the 2d-array, leaving R and B = 0 and A = 255. Like this:
All solutions I found would apply a color map or limit the vmin and vmax of the colorbar but what I need is a colorbar that goes from pitch black to the brightest color present in the image. E.g. if I have an image in shades of purple, the color bar should go from 0 to 'full' purple with only shades of purple in it. The closest solution I found was this (https://pelson.github.io/2013/working_with_colors_in_matplotlib/), but it doesn't fit a "general" solution.
An image I'm getting is given below.
import numpy as np
from ImgMath import colorize
import matplotlib.pyplot as plt
import Mapping
data = Mapping.getpeakmap('Au')
# data shape is (10,13) and len(data) is 10
norm_data = data/data.max()*255
color_data = colorize(norm_data,'green')
# color_data shape is (10,13,4) and len(color_data) is 10
fig, ax = plt.subplots()
im = plt.imshow(color_data)
fig.colorbar(im)
plt.show()

You could map your data with a custom, all-green, colormap
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.colors import ListedColormap
# input 2D array
data = np.random.randint(0,255, size=(10,13))
z = np.zeros(256)
colors = np.linspace(0,1,256)
alpha = np.ones(256)
#create colormap
greencolors = np.c_[z,colors,z,alpha]
cmap = ListedColormap(greencolors)
im = plt.imshow(data/255., cmap=cmap, vmin=0, vmax=1)
plt.colorbar(im)
plt.show()

Combine picture and plot with matplotlib with alpha channel

I have a .png image with alpha channel and a random pattern generated with numpy.
I want to supperpose both images using matplotlib. The bottom image must be the random pattern and over this, I want to see the second image (attached in the end of the post).
The code for both images is the following:
from PIL import Image
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.cm as cm
# Random image pattern
fig = plt.subplots(figsize = (20,4))
x = np.arange(0,2000,1)
y = np.arange(0,284,1)
X,Y = np.meshgrid(x,y)
Z = 0.6+0.1*np.random.rand(284,2000)
Z[0,0] = 0
Z[1,1] = 1
# Plot the density map using nearest-neighbor interpolation
plt.pcolormesh(X,Y,Z,cmap = cm.gray)
The result is the following image:
To import the image, I use the following code:
# Sample data
fig = plt.subplots(figsize = (20,4))
# Plot the density map using nearest-neighbor interpolation
plt.imread("good_image_2.png")
plt.imshow(img)
print(img.shape)
The image is the following:
Thus, the final result that I want is:

You can make an image-like array for Z and then just use imshow to display it before the image of the buttons, etc. Note that this only works because your png has an alpha channel.
Code:
from PIL import Image
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.cm as cm
# Plot the density map using nearest-neighbor interpolation
img = plt.imread("image.png")
(xSize, ySize, cSize) = img.shape
x = np.arange(0,xSize,1)
y = np.arange(0,ySize,1)
X,Y = np.meshgrid(x,y)
Z = 0.6+0.1*np.random.rand(xSize,ySize)
Z[0,0] = 0
Z[1,1] = 1
# We need Z to have red, blue and green channels
# For a greyscale image these are all the same
Z=np.repeat(Z,3).reshape(xSize,ySize,3)
fig = plt.figure(figsize=(20,8))
ax = fig.add_subplot(111)
ax.imshow(Z, interpolation=None)
ax.imshow(img, interpolation=None)
fig.savefig('output.png')
Output:
You can also turn off axes if you prefer.
ax.axis('off')

Generate a heatmap using a scatter data set

I have a set of X,Y data points (about 10k) that are easy to plot as a scatter plot but that I would like to represent as a heatmap.
I looked through the examples in Matplotlib and they all seem to already start with heatmap cell values to generate the image.
Is there a method that converts a bunch of x, y, all different, to a heatmap (where zones with higher frequency of x, y would be "warmer")?

If you don't want hexagons, you can use numpy's histogram2d function:
import numpy as np
import numpy.random
import matplotlib.pyplot as plt
# Generate some test data
x = np.random.randn(8873)
y = np.random.randn(8873)
heatmap, xedges, yedges = np.histogram2d(x, y, bins=50)
extent = [xedges[0], xedges[-1], yedges[0], yedges[-1]]
plt.clf()
plt.imshow(heatmap.T, extent=extent, origin='lower')
plt.show()
This makes a 50x50 heatmap. If you want, say, 512x384, you can put bins=(512, 384) in the call to histogram2d.
Example:

In Matplotlib lexicon, i think you want a hexbin plot.
If you're not familiar with this type of plot, it's just a bivariate histogram in which the xy-plane is tessellated by a regular grid of hexagons.
So from a histogram, you can just count the number of points falling in each hexagon, discretiize the plotting region as a set of windows, assign each point to one of these windows; finally, map the windows onto a color array, and you've got a hexbin diagram.
Though less commonly used than e.g., circles, or squares, that hexagons are a better choice for the geometry of the binning container is intuitive:
hexagons have nearest-neighbor symmetry (e.g., square bins don't,
e.g., the distance from a point on a square's border to a point
inside that square is not everywhere equal) and
hexagon is the highest n-polygon that gives regular plane
tessellation (i.e., you can safely re-model your kitchen floor with hexagonal-shaped tiles because you won't have any void space between the tiles when you are finished--not true for all other higher-n, n >= 7, polygons).
(Matplotlib uses the term hexbin plot; so do (AFAIK) all of the plotting libraries for R; still i don't know if this is the generally accepted term for plots of this type, though i suspect it's likely given that hexbin is short for hexagonal binning, which is describes the essential step in preparing the data for display.)
from matplotlib import pyplot as PLT
from matplotlib import cm as CM
from matplotlib import mlab as ML
import numpy as NP
n = 1e5
x = y = NP.linspace(-5, 5, 100)
X, Y = NP.meshgrid(x, y)
Z1 = ML.bivariate_normal(X, Y, 2, 2, 0, 0)
Z2 = ML.bivariate_normal(X, Y, 4, 1, 1, 1)
ZD = Z2 - Z1
x = X.ravel()
y = Y.ravel()
z = ZD.ravel()
gridsize=30
PLT.subplot(111)
# if 'bins=None', then color of each hexagon corresponds directly to its count
# 'C' is optional--it maps values to x-y coordinates; if 'C' is None (default) then
# the result is a pure 2D histogram
PLT.hexbin(x, y, C=z, gridsize=gridsize, cmap=CM.jet, bins=None)
PLT.axis([x.min(), x.max(), y.min(), y.max()])
cb = PLT.colorbar()
cb.set_label('mean value')
PLT.show()

Edit: For a better approximation of Alejandro's answer, see below.
I know this is an old question, but wanted to add something to Alejandro's anwser: If you want a nice smoothed image without using py-sphviewer you can instead use np.histogram2d and apply a gaussian filter (from scipy.ndimage.filters) to the heatmap:
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.cm as cm
from scipy.ndimage.filters import gaussian_filter
def myplot(x, y, s, bins=1000):
heatmap, xedges, yedges = np.histogram2d(x, y, bins=bins)
heatmap = gaussian_filter(heatmap, sigma=s)
extent = [xedges[0], xedges[-1], yedges[0], yedges[-1]]
return heatmap.T, extent
fig, axs = plt.subplots(2, 2)
# Generate some test data
x = np.random.randn(1000)
y = np.random.randn(1000)
sigmas = [0, 16, 32, 64]
for ax, s in zip(axs.flatten(), sigmas):
if s == 0:
ax.plot(x, y, 'k.', markersize=5)
ax.set_title("Scatter plot")
else:
img, extent = myplot(x, y, s)
ax.imshow(img, extent=extent, origin='lower', cmap=cm.jet)
ax.set_title("Smoothing with $\sigma$ = %d" % s)
plt.show()
Produces:
The scatter plot and s=16 plotted on top of eachother for Agape Gal'lo (click for better view):
One difference I noticed with my gaussian filter approach and Alejandro's approach was that his method shows local structures much better than mine. Therefore I implemented a simple nearest neighbour method at pixel level. This method calculates for each pixel the inverse sum of the distances of the n closest points in the data. This method is at a high resolution pretty computationally expensive and I think there's a quicker way, so let me know if you have any improvements.
Update: As I suspected, there's a much faster method using Scipy's scipy.cKDTree. See Gabriel's answer for the implementation.
Anyway, here's my code:
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.cm as cm
def data_coord2view_coord(p, vlen, pmin, pmax):
dp = pmax - pmin
dv = (p - pmin) / dp * vlen
return dv
def nearest_neighbours(xs, ys, reso, n_neighbours):
im = np.zeros([reso, reso])
extent = [np.min(xs), np.max(xs), np.min(ys), np.max(ys)]
xv = data_coord2view_coord(xs, reso, extent[0], extent[1])
yv = data_coord2view_coord(ys, reso, extent[2], extent[3])
for x in range(reso):
for y in range(reso):
xp = (xv - x)
yp = (yv - y)
d = np.sqrt(xp**2 + yp**2)
im[y][x] = 1 / np.sum(d[np.argpartition(d.ravel(), n_neighbours)[:n_neighbours]])
return im, extent
n = 1000
xs = np.random.randn(n)
ys = np.random.randn(n)
resolution = 250
fig, axes = plt.subplots(2, 2)
for ax, neighbours in zip(axes.flatten(), [0, 16, 32, 64]):
if neighbours == 0:
ax.plot(xs, ys, 'k.', markersize=2)
ax.set_aspect('equal')
ax.set_title("Scatter Plot")
else:
im, extent = nearest_neighbours(xs, ys, resolution, neighbours)
ax.imshow(im, origin='lower', extent=extent, cmap=cm.jet)
ax.set_title("Smoothing over %d neighbours" % neighbours)
ax.set_xlim(extent[0], extent[1])
ax.set_ylim(extent[2], extent[3])
plt.show()
Result:

Instead of using np.hist2d, which in general produces quite ugly histograms, I would like to recycle py-sphviewer, a python package for rendering particle simulations using an adaptive smoothing kernel and that can be easily installed from pip (see webpage documentation). Consider the following code, which is based on the example:
import numpy as np
import numpy.random
import matplotlib.pyplot as plt
import sphviewer as sph
def myplot(x, y, nb=32, xsize=500, ysize=500):
xmin = np.min(x)
xmax = np.max(x)
ymin = np.min(y)
ymax = np.max(y)
x0 = (xmin+xmax)/2.
y0 = (ymin+ymax)/2.
pos = np.zeros([len(x),3])
pos[:,0] = x
pos[:,1] = y
w = np.ones(len(x))
P = sph.Particles(pos, w, nb=nb)
S = sph.Scene(P)
S.update_camera(r='infinity', x=x0, y=y0, z=0,
xsize=xsize, ysize=ysize)
R = sph.Render(S)
R.set_logscale()
img = R.get_image()
extent = R.get_extent()
for i, j in zip(xrange(4), [x0,x0,y0,y0]):
extent[i] += j
print extent
return img, extent
fig = plt.figure(1, figsize=(10,10))
ax1 = fig.add_subplot(221)
ax2 = fig.add_subplot(222)
ax3 = fig.add_subplot(223)
ax4 = fig.add_subplot(224)
# Generate some test data
x = np.random.randn(1000)
y = np.random.randn(1000)
#Plotting a regular scatter plot
ax1.plot(x,y,'k.', markersize=5)
ax1.set_xlim(-3,3)
ax1.set_ylim(-3,3)
heatmap_16, extent_16 = myplot(x,y, nb=16)
heatmap_32, extent_32 = myplot(x,y, nb=32)
heatmap_64, extent_64 = myplot(x,y, nb=64)
ax2.imshow(heatmap_16, extent=extent_16, origin='lower', aspect='auto')
ax2.set_title("Smoothing over 16 neighbors")
ax3.imshow(heatmap_32, extent=extent_32, origin='lower', aspect='auto')
ax3.set_title("Smoothing over 32 neighbors")
#Make the heatmap using a smoothing over 64 neighbors
ax4.imshow(heatmap_64, extent=extent_64, origin='lower', aspect='auto')
ax4.set_title("Smoothing over 64 neighbors")
plt.show()
which produces the following image:
As you see, the images look pretty nice, and we are able to identify different substructures on it. These images are constructed spreading a given weight for every point within a certain domain, defined by the smoothing length, which in turns is given by the distance to the closer nb neighbor (I've chosen 16, 32 and 64 for the examples). So, higher density regions typically are spread over smaller regions compared to lower density regions.
The function myplot is just a very simple function that I've written in order to give the x,y data to py-sphviewer to do the magic.

If you are using 1.2.x
import numpy as np
import matplotlib.pyplot as plt
x = np.random.randn(100000)
y = np.random.randn(100000)
plt.hist2d(x,y,bins=100)
plt.show()

Seaborn now has the jointplot function which should work nicely here:
import numpy as np
import seaborn as sns
import matplotlib.pyplot as plt
# Generate some test data
x = np.random.randn(8873)
y = np.random.randn(8873)
sns.jointplot(x=x, y=y, kind='hex')
plt.show()

Here's Jurgy's great nearest neighbour approach but implemented using scipy.cKDTree. In my tests it's about 100x faster.
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.cm as cm
from scipy.spatial import cKDTree
def data_coord2view_coord(p, resolution, pmin, pmax):
dp = pmax - pmin
dv = (p - pmin) / dp * resolution
return dv
n = 1000
xs = np.random.randn(n)
ys = np.random.randn(n)
resolution = 250
extent = [np.min(xs), np.max(xs), np.min(ys), np.max(ys)]
xv = data_coord2view_coord(xs, resolution, extent[0], extent[1])
yv = data_coord2view_coord(ys, resolution, extent[2], extent[3])
def kNN2DDens(xv, yv, resolution, neighbours, dim=2):
"""
"""
# Create the tree
tree = cKDTree(np.array([xv, yv]).T)
# Find the closest nnmax-1 neighbors (first entry is the point itself)
grid = np.mgrid[0:resolution, 0:resolution].T.reshape(resolution**2, dim)
dists = tree.query(grid, neighbours)
# Inverse of the sum of distances to each grid point.
inv_sum_dists = 1. / dists[0].sum(1)
# Reshape
im = inv_sum_dists.reshape(resolution, resolution)
return im
fig, axes = plt.subplots(2, 2, figsize=(15, 15))
for ax, neighbours in zip(axes.flatten(), [0, 16, 32, 63]):
if neighbours == 0:
ax.plot(xs, ys, 'k.', markersize=5)
ax.set_aspect('equal')
ax.set_title("Scatter Plot")
else:
im = kNN2DDens(xv, yv, resolution, neighbours)
ax.imshow(im, origin='lower', extent=extent, cmap=cm.Blues)
ax.set_title("Smoothing over %d neighbours" % neighbours)
ax.set_xlim(extent[0], extent[1])
ax.set_ylim(extent[2], extent[3])
plt.savefig('new.png', dpi=150, bbox_inches='tight')

and the initial question was... how to convert scatter values to grid values, right?
histogram2d does count the frequency per cell, however, if you have other data per cell than just the frequency, you'd need some additional work to do.
x = data_x # between -10 and 4, log-gamma of an svc
y = data_y # between -4 and 11, log-C of an svc
z = data_z #between 0 and 0.78, f1-values from a difficult dataset
So, I have a dataset with Z-results for X and Y coordinates. However, I was calculating few points outside the area of interest (large gaps), and heaps of points in a small area of interest.
Yes here it becomes more difficult but also more fun. Some libraries (sorry):
from matplotlib import pyplot as plt
from matplotlib import cm
import numpy as np
from scipy.interpolate import griddata
pyplot is my graphic engine today,
cm is a range of color maps with some initeresting choice.
numpy for the calculations,
and griddata for attaching values to a fixed grid.
The last one is important especially because the frequency of xy points is not equally distributed in my data. First, let's start with some boundaries fitting to my data and an arbitrary grid size. The original data has datapoints also outside those x and y boundaries.
#determine grid boundaries
gridsize = 500
x_min = -8
x_max = 2.5
y_min = -2
y_max = 7
So we have defined a grid with 500 pixels between the min and max values of x and y.
In my data, there are lots more than the 500 values available in the area of high interest; whereas in the low-interest-area, there are not even 200 values in the total grid; between the graphic boundaries of x_min and x_max there are even less.
So for getting a nice picture, the task is to get an average for the high interest values and to fill the gaps elsewhere.
I define my grid now. For each xx-yy pair, i want to have a color.
xx = np.linspace(x_min, x_max, gridsize) # array of x values
yy = np.linspace(y_min, y_max, gridsize) # array of y values
grid = np.array(np.meshgrid(xx, yy.T))
grid = grid.reshape(2, grid.shape[1]*grid.shape[2]).T
Why the strange shape? scipy.griddata wants a shape of (n, D).
Griddata calculates one value per point in the grid, by a predefined method.
I choose "nearest" - empty grid points will be filled with values from the nearest neighbor. This looks as if the areas with less information have bigger cells (even if it is not the case). One could choose to interpolate "linear", then areas with less information look less sharp. Matter of taste, really.
points = np.array([x, y]).T # because griddata wants it that way
z_grid2 = griddata(points, z, grid, method='nearest')
# you get a 1D vector as result. Reshape to picture format!
z_grid2 = z_grid2.reshape(xx.shape[0], yy.shape[0])
And hop, we hand over to matplotlib to display the plot
fig = plt.figure(1, figsize=(10, 10))
ax1 = fig.add_subplot(111)
ax1.imshow(z_grid2, extent=[x_min, x_max,y_min, y_max, ],
origin='lower', cmap=cm.magma)
ax1.set_title("SVC: empty spots filled by nearest neighbours")
ax1.set_xlabel('log gamma')
ax1.set_ylabel('log C')
plt.show()
Around the pointy part of the V-Shape, you see I did a lot of calculations during my search for the sweet spot, whereas the less interesting parts almost everywhere else have a lower resolution.

Make a 2-dimensional array that corresponds to the cells in your final image, called say heatmap_cells and instantiate it as all zeroes.
Choose two scaling factors that define the difference between each array element in real units, for each dimension, say x_scale and y_scale. Choose these such that all your datapoints will fall within the bounds of the heatmap array.
For each raw datapoint with x_value and y_value:
heatmap_cells[floor(x_value/x_scale),floor(y_value/y_scale)]+=1

Very similar to #Piti's answer, but using 1 call instead of 2 to generate the points:
import numpy as np
import matplotlib.pyplot as plt
pts = 1000000
mean = [0.0, 0.0]
cov = [[1.0,0.0],[0.0,1.0]]
x,y = np.random.multivariate_normal(mean, cov, pts).T
plt.hist2d(x, y, bins=50, cmap=plt.cm.jet)
plt.show()
Output:

Here's one I made on a 1 Million point set with 3 categories (colored Red, Green, and Blue). Here's a link to the repository if you'd like to try the function. Github Repo
histplot(
X,
Y,
labels,
bins=2000,
range=((-3,3),(-3,3)),
normalize_each_label=True,
colors = [
[1,0,0],
[0,1,0],
[0,0,1]],
gain=50)

I'm afraid I'm a little late to the party but I had a similar question a while ago. The accepted answer (by #ptomato) helped me out but I'd also want to post this in case it's of use to someone.
''' I wanted to create a heatmap resembling a football pitch which would show the different actions performed '''
import numpy as np
import matplotlib.pyplot as plt
import random
#fixing random state for reproducibility
np.random.seed(1234324)
fig = plt.figure(12)
ax1 = fig.add_subplot(121)
ax2 = fig.add_subplot(122)
#Ratio of the pitch with respect to UEFA standards
hmap= np.full((6, 10), 0)
#print(hmap)
xlist = np.random.uniform(low=0.0, high=100.0, size=(20))
ylist = np.random.uniform(low=0.0, high =100.0, size =(20))
#UEFA Pitch Standards are 105m x 68m
xlist = (xlist/100)*10.5
ylist = (ylist/100)*6.5
ax1.scatter(xlist,ylist)
#int of the co-ordinates to populate the array
xlist_int = xlist.astype (int)
ylist_int = ylist.astype (int)
#print(xlist_int, ylist_int)
for i, j in zip(xlist_int, ylist_int):
#this populates the array according to the x,y co-ordinate values it encounters
hmap[j][i]= hmap[j][i] + 1
#Reversing the rows is necessary
hmap = hmap[::-1]
#print(hmap)
im = ax2.imshow(hmap)
Here's the result

None of these solutions worked for my application, so this is what I came up with. Essentially I am placing a 2D Gaussian at every single point:
import cv2
import numpy as np
import matplotlib.pyplot as plt
def getGaussian2D(ksize, sigma, norm=True):
oneD = cv2.getGaussianKernel(ksize=ksize, sigma=sigma)
twoD = np.outer(oneD.T, oneD)
return twoD / np.sum(twoD) if norm else twoD
def pt2heat(pts, shape, kernel=16, sigma=5):
heat = np.zeros(shape)
k = getGaussian2D(kernel, sigma)
for y,x in pts:
x, y = int(x), int(y)
for i in range(-kernel//2, kernel//2):
for j in range(-kernel//2, kernel//2):
if 0 <= x+i < shape[0] and 0 <= y+j < shape[1]:
heat[x+i, y+j] = heat[x+i, y+j] + k[i+kernel//2, j+kernel//2]
return heat
heat = pts2heat(pts, img.shape[:2])
plt.imshow(heat, cmap='heat')
Here are the points overlayed ontop of it's associated image, along with the resulting heat map: