Develop Reference

how to do docx to pdf conversion using python library without subprocess in linux? [duplicate]

I'am tasked with converting tons of .doc files to .pdf. And the only way my supervisor wants me to do this is through MSWord 2010. I know I should be able to automate this with python COM automation. Only problem is I dont know how and where to start. I tried searching for some tutorials but was not able to find any (May be I might have, but I don't know what I'm looking for).
Right now I'm reading through this. Dont know how useful this is going to be.

A simple example using comtypes, converting a single file, input and output filenames given as commandline arguments:
import sys
import os
import comtypes.client
wdFormatPDF = 17
in_file = os.path.abspath(sys.argv[1])
out_file = os.path.abspath(sys.argv[2])
word = comtypes.client.CreateObject('Word.Application')
doc = word.Documents.Open(in_file)
doc.SaveAs(out_file, FileFormat=wdFormatPDF)
doc.Close()
word.Quit()
You could also use pywin32, which would be the same except for:
import win32com.client
and then:
word = win32com.client.Dispatch('Word.Application')

You can use the docx2pdf python package to bulk convert docx to pdf. It can be used as both a CLI and a python library. It requires Microsoft Office to be installed and uses COM on Windows and AppleScript (JXA) on macOS.
from docx2pdf import convert
convert("input.docx")
convert("input.docx", "output.pdf")
convert("my_docx_folder/")
pip install docx2pdf
docx2pdf input.docx output.pdf
Disclaimer: I wrote the docx2pdf package. https://github.com/AlJohri/docx2pdf

I have tested many solutions but no one of them works efficiently on Linux distribution.
I recommend this solution :
import sys
import subprocess
import re
def convert_to(folder, source, timeout=None):
args = [libreoffice_exec(), '--headless', '--convert-to', 'pdf', '--outdir', folder, source]
process = subprocess.run(args, stdout=subprocess.PIPE, stderr=subprocess.PIPE, timeout=timeout)
filename = re.search('-> (.*?) using filter', process.stdout.decode())
return filename.group(1)
def libreoffice_exec():
# TODO: Provide support for more platforms
if sys.platform == 'darwin':
return '/Applications/LibreOffice.app/Contents/MacOS/soffice'
return 'libreoffice'
and you call your function:
result = convert_to('TEMP Directory', 'Your File', timeout=15)
All resources:
https://michalzalecki.com/converting-docx-to-pdf-using-python/

I have worked on this problem for half a day, so I think I should share some of my experience on this matter. Steven's answer is right, but it will fail on my computer. There are two key points to fix it here:
(1). The first time when I created the 'Word.Application' object, I should make it (the word app) visible before open any documents. (Actually, even I myself cannot explain why this works. If I do not do this on my computer, the program will crash when I try to open a document in the invisible model, then the 'Word.Application' object will be deleted by OS. )
(2). After doing (1), the program will work well sometimes but may fail often. The crash error "COMError: (-2147418111, 'Call was rejected by callee.', (None, None, None, 0, None))" means that the COM Server may not be able to response so quickly. So I add a delay before I tried to open a document.
After doing these two steps, the program will work perfectly with no failure anymore. The demo code is as below. If you have encountered the same problems, try to follow these two steps. Hope it helps.
import os
import comtypes.client
import time
wdFormatPDF = 17
# absolute path is needed
# be careful about the slash '\', use '\\' or '/' or raw string r"..."
in_file=r'absolute path of input docx file 1'
out_file=r'absolute path of output pdf file 1'
in_file2=r'absolute path of input docx file 2'
out_file2=r'absolute path of outputpdf file 2'
# print out filenames
print in_file
print out_file
print in_file2
print out_file2
# create COM object
word = comtypes.client.CreateObject('Word.Application')
# key point 1: make word visible before open a new document
word.Visible = True
# key point 2: wait for the COM Server to prepare well.
time.sleep(3)
# convert docx file 1 to pdf file 1
doc=word.Documents.Open(in_file) # open docx file 1
doc.SaveAs(out_file, FileFormat=wdFormatPDF) # conversion
doc.Close() # close docx file 1
word.Visible = False
# convert docx file 2 to pdf file 2
doc = word.Documents.Open(in_file2) # open docx file 2
doc.SaveAs(out_file2, FileFormat=wdFormatPDF) # conversion
doc.Close() # close docx file 2
word.Quit() # close Word Application

unoconv (writen in Python) and OpenOffice running as a headless daemon.
https://github.com/unoconv/unoconv
http://dag.wiee.rs/home-made/unoconv/
Works very nicely for doc, docx, ppt, pptx, xls, xlsx.
Very useful if you need to convert docs or save/convert to certain formats on a server.

As an alternative to the SaveAs function, you could also use ExportAsFixedFormat which gives you access to the PDF options dialog you would normally see in Word. With this you can specify bookmarks and other document properties.
doc.ExportAsFixedFormat(OutputFileName=pdf_file,
ExportFormat=17, #17 = PDF output, 18=XPS output
OpenAfterExport=False,
OptimizeFor=0, #0=Print (higher res), 1=Screen (lower res)
CreateBookmarks=1, #0=No bookmarks, 1=Heading bookmarks only, 2=bookmarks match word bookmarks
DocStructureTags=True
);
The full list of function arguments is: 'OutputFileName', 'ExportFormat', 'OpenAfterExport', 'OptimizeFor', 'Range', 'From', 'To', 'Item', 'IncludeDocProps', 'KeepIRM', 'CreateBookmarks', 'DocStructureTags', 'BitmapMissingFonts', 'UseISO19005_1', 'FixedFormatExtClassPtr'

It's worth noting that Stevens answer works, but make sure if using a for loop to export multiple files to place the ClientObject or Dispatch statements before the loop - it only needs to be created once - see my problem: Python win32com.client.Dispatch looping through Word documents and export to PDF; fails when next loop occurs

If you don't mind using PowerShell have a look at this Hey, Scripting Guy! article. The code presented could be adopted to use the wdFormatPDF enumeration value of WdSaveFormat (see here).
This blog article presents a different implementation of the same idea.

I have modified it for ppt support as well. My solution support all the below-specified extensions.
word_extensions = [".doc", ".odt", ".rtf", ".docx", ".dotm", ".docm"]
ppt_extensions = [".ppt", ".pptx"]
My Solution: Github Link
I have modified code from Docx2PDF

I tried the accepted answer but wasn't particularly keen on the bloated PDFs Word was producing which was usually an order of magnitude bigger than expected. After looking how to disable the dialogs when using a virtual PDF printer I came across Bullzip PDF Printer and I've been rather impressed with its features. It's now replaced the other virtual printers I used previously. You'll find a "free community edition" on their download page.
The COM API can be found here and a list of the usable settings can be found here. The settings are written to a "runonce" file which is used for one print job only and then removed automatically. When printing multiple PDFs we need to make sure one print job completes before starting another to ensure the settings are used correctly for each file.
import os, re, time, datetime, win32com.client
def print_to_Bullzip(file):
util = win32com.client.Dispatch("Bullzip.PDFUtil")
settings = win32com.client.Dispatch("Bullzip.PDFSettings")
settings.PrinterName = util.DefaultPrinterName # make sure we're controlling the right PDF printer
outputFile = re.sub("\.[^.]+$", ".pdf", file)
statusFile = re.sub("\.[^.]+$", ".status", file)
settings.SetValue("Output", outputFile)
settings.SetValue("ConfirmOverwrite", "no")
settings.SetValue("ShowSaveAS", "never")
settings.SetValue("ShowSettings", "never")
settings.SetValue("ShowPDF", "no")
settings.SetValue("ShowProgress", "no")
settings.SetValue("ShowProgressFinished", "no") # disable balloon tip
settings.SetValue("StatusFile", statusFile) # created after print job
settings.WriteSettings(True) # write settings to the runonce.ini
util.PrintFile(file, util.DefaultPrinterName) # send to Bullzip virtual printer
# wait until print job completes before continuing
# otherwise settings for the next job may not be used
timestamp = datetime.datetime.now()
while( (datetime.datetime.now() - timestamp).seconds < 10):
if os.path.exists(statusFile) and os.path.isfile(statusFile):
error = util.ReadIniString(statusFile, "Status", "Errors", '')
if error != "0":
raise IOError("PDF was created with errors")
os.remove(statusFile)
return
time.sleep(0.1)
raise IOError("PDF creation timed out")

I was working with this solution but I needed to search all .docx, .dotm, .docm, .odt, .doc or .rtf and then turn them all to .pdf (python 3.7.5). Hope it works...
import os
import win32com.client
wdFormatPDF = 17
for root, dirs, files in os.walk(r'your directory here'):
for f in files:
if f.endswith(".doc") or f.endswith(".odt") or f.endswith(".rtf"):
try:
print(f)
in_file=os.path.join(root,f)
word = win32com.client.Dispatch('Word.Application')
word.Visible = False
doc = word.Documents.Open(in_file)
doc.SaveAs(os.path.join(root,f[:-4]), FileFormat=wdFormatPDF)
doc.Close()
word.Quit()
word.Visible = True
print ('done')
os.remove(os.path.join(root,f))
pass
except:
print('could not open')
# os.remove(os.path.join(root,f))
elif f.endswith(".docx") or f.endswith(".dotm") or f.endswith(".docm"):
try:
print(f)
in_file=os.path.join(root,f)
word = win32com.client.Dispatch('Word.Application')
word.Visible = False
doc = word.Documents.Open(in_file)
doc.SaveAs(os.path.join(root,f[:-5]), FileFormat=wdFormatPDF)
doc.Close()
word.Quit()
word.Visible = True
print ('done')
os.remove(os.path.join(root,f))
pass
except:
print('could not open')
# os.remove(os.path.join(root,f))
else:
pass
The try and except was for those documents I couldn't read and won't exit the code until the last document.

You should start from investigating so called virtual PDF print drivers.
As soon as you will find one you should be able to write batch file that prints your DOC files into PDF files. You probably can do this in Python too (setup printer driver output and issue document/print command in MSWord, later can be done using command line AFAIR).

import docx2txt
from win32com import client
import os
files_from_folder = r"c:\\doc"
directory = os.fsencode(files_from_folder)
amount = 1
word = client.DispatchEx("Word.Application")
word.Visible = True
for file in os.listdir(directory):
filename = os.fsdecode(file)
print(filename)
if filename.endswith('docx'):
text = docx2txt.process(os.path.join(files_from_folder, filename))
print(f'{filename} transfered ({amount})')
amount += 1
new_filename = filename.split('.')[0] + '.txt'
try:
with open(os.path.join(files_from_folder + r'\txt_files', new_filename), 'w', encoding='utf-8') as t:
t.write(text)
except:
os.mkdir(files_from_folder + r'\txt_files')
with open(os.path.join(files_from_folder + r'\txt_files', new_filename), 'w', encoding='utf-8') as t:
t.write(text)
elif filename.endswith('doc'):
doc = word.Documents.Open(os.path.join(files_from_folder, filename))
text = doc.Range().Text
doc.Close()
print(f'{filename} transfered ({amount})')
amount += 1
new_filename = filename.split('.')[0] + '.txt'
try:
with open(os.path.join(files_from_folder + r'\txt_files', new_filename), 'w', encoding='utf-8') as t:
t.write(text)
except:
os.mkdir(files_from_folder + r'\txt_files')
with open(os.path.join(files_from_folder + r'\txt_files', new_filename), 'w', encoding='utf-8') as t:
t.write(text)
word.Quit()
The Source Code, see here:
https://neculaifantanaru.com/en/python-full-code-how-to-convert-doc-and-docx-files-to-pdf-from-the-folder.html

I would suggest ignoring your supervisor and use OpenOffice which has a Python api. OpenOffice has built in support for Python and someone created a library specific for this purpose (PyODConverter).
If he isn't happy with the output, tell him it could take you weeks to do it with word.

How to print pdf file without opening PDF viewer print prompt in python

I'd like to print a PDF file by Python, without opening any PDF viewer program (ex. adobe).
I have tried some code. It pop up the adobe program before printing.
first code
import win32print
import win32api
currentprinter = win32print.GetDefaultPrinter()
win32api.ShellExecute(0, "print", 'report.pdf', currentprinter, ".", 0)
second code
import os
os.startfile("report.pdf", "print")
Any code I have to rewrite or any recommend program to use instead of adobe?

download PDFtoPrinter.exe and move it into folder.
code it.
import subprocess
def command_print(event = None):
command = "{} {}".format('PDFtoPrinter.exe','report.pdf')
subprocess.call(command,shell=True)
command_print()

Why can't pyautogui find the picture?

import pyautogui
button7location = pyautogui.locateOnScreen('picturee.png')
print("finished")
The picture works perfect in a HTML file i created.

Digging into the source code, we are directed from pyautogui to pyscreeze where we can see the following block of code in the location functions.
if isinstance(needleImage, (str, unicode)):
# 'image' is a filename, load the Image object
needleFileObj = open(needleImage, 'rb')
needleImage = Image.open(needleFileObj)
In short, you need the image to be in the same directory as the one you're launching the script from.
Link to source

Using python to get images from an mp3 file

I found that this command using eyed3 works fine on my mp3 file writing the images found to the directory DIR
eyeD3 --write-images=DIR file.mp3
But I would like to use this in a python program could someone give me an example
on how to do that.
This snippet works fine
audiofile = eyed3.load("file.mp3")
print(audiofile.tag.album)
print(audiofile.tag.artist)
print(audiofile.tag.title)
print(audiofile.tag.track_num)

This oughta do it.
I've added the image type as well, as there can be multiple images in a single MP3 file, and you didn't specify which one you needed. For most files this would be the album cover.
import eyed3
audio_file = eyed3.load("test.mp3")
album_name = audio_file.tag.album
artist_name = audio_file.tag.artist
for image in audio_file.tag.images:
image_file = open("{0} - {1}({2}).jpg".format(artist_name, album_name, image.picture_type), "wb")
print("Writing image file: {0} - {1}({2}).jpg".format(artist_name, album_name, image.picture_type))
image_file.write(image.image_data)
image_file.close()

Doing a download with easywebdav results in bad files

I have a small program I created to download image files form a FlashAir webdav enabled SD Card. This works fine with Powershell but trying a Python implementation.
I have it working where easywebdav can download the file but the resulting size is 22Kb which is wrong and windows does not recognize them as a valid file.
I have applied a basestring fix to the client.py for handling Python 3.x instead of 2.x found here How to overcome Python 3.4 NameError: name 'basestring' is not defined.
I'm on Python 3.5.1.
import easywebdav
urlFlashAir = 'http://flashair'
imgLocation = '/DCIM/101MSDCF'
destLocation = 'c:\\test3\\'
remoteDirName = ''
webDavConnection = easywebdav.connect('flashair', '', '')
lsOutput = webDavConnection.ls(imgLocation)
for i in lsOutput:
if i.size == 0:
remoteDirName = i.name
if i.size > 0:
filename = (i.name).replace(remoteDirName,'')
print(i.name)
print(remoteDirName)
print(filename)
webDavConnection.download(imgLocation, destLocation + filename)

I inspected the 22KB article with notepad++ and found that it was a web page for the flashair card. Upon investigation of the code and documentation I found I was not referencing the remote filename just the location. Once I fixed the code to append a forward slash and a filename. Now properly downloads the file.