I have apache ampps which comes with version 3.6.1 of python.
I was given various directions for installing pip.
None seemed to work.
For example,
link https://packaging.python.org/tutorials/installing-packages/
says that I can run:
python -m pip install -U pip setuptools
Get a whole bunch of errors. It might amount to: no module named queue.
Similar errors happen when I download the file they mentioned (get-pip.py) and run it from python.
Now, when I look at directions for installing queue, some point me to use pip. But when I try to install pip, it is complaining that queue is not there....
Hmmm...?
Now what?
ERROR:
File "C:\Users\Nima\AppData\Local\Temp\tmp1v2hpnae\pip.zip\pip\compat\__init__.py", line 11, in <module>
File "C:\Program Files (x86)\Ampps\python\lib\logging\config.py", line 30, in <module>
import logging.handlers
File "C:\Program Files (x86)\Ampps\python\lib\logging\handlers.py", line 28, in <module>
import queue
ModuleNotFoundError: No module named 'queue'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "getpip.py", line 20061, in <module>
main()
File "getpip.py", line 194, in main
bootstrap(tmpdir=tmpdir)
File "getpip.py", line 82, in bootstrap
import pip
File "C:\Users\Nima\AppData\Local\Temp\tmp1v2hpnae\pip.zip\pip\__init__.py", line 26, in <module>
File "C:\Users\Nima\AppData\Local\Temp\tmp1v2hpnae\pip.zip\pip\utils\__init__.py", line 22, in <module>
File "C:\Users\Nima\AppData\Local\Temp\tmp1v2hpnae\pip.zip\pip\compat\__init__.py", line 13, in <module>
File "C:\Users\Nima\AppData\Local\Temp\tmp1v2hpnae\pip.zip\pip\compat\dictconfig.py", line 22, in <module>
File "C:\Program Files (x86)\Ampps\python\lib\logging\handlers.py", line 28, in <module>
import queue
ModuleNotFoundError: No module named 'queue'
From the format i see here.
Firstly, pip is an installer basically what you've confused yourself with is that pip = queue which is not the case. Pip is just a packager that helps you install packages. Queue is a different module
For your case here Queue is a part of multiprocessing module so you just put this at the top of your code:
from multiprocessing import Queue
and you do not need to add import pip into your code
hope that explained things better for you :)
This line:
python -m pip install -U pip setuptools
means use pip to upgrade the installations of pip and setuptools. Only works if you already have pip - which you probably do. It is a useful step to make sure your install environment is up to date, though.
pip does in places use queue. Note it's been renamed between python2 and python3 - if you have py3, which you claim, you have queue (it was Queue in py2). So I wonder if there's a version mismatch in something.
Windows installs always create problems. You might be safer installing and experimenting with a virtualenv so your experiments don't mess up the python install from the package you mention - ampps. There are plenty of notes on that elsewhere on stackoverflow... e.g. Python and Virtualenv on Windows
pip is already included in 3.6.1, but it is in subfolder Scripts.
it is not automatically a part of the path variable.
you have to change directory and run pip or you can change environment variable so that the location of pip becomes part of the path search.
Related
I'm trying to use w3af to start doing some routine security testing on a webapp that I'm using. Install instructions recommend cloning a git repo, then running the python code and seeing what dependencies are unmet then installing them. My first run yielded:
ModuleNotFoundError: No module named 'ConfigParser
OK, no problem, right?
$ pip install ConfigParser
Collecting ConfigParser
Downloading configparser-5.2.0-py3-none-any.whl (19 kB)
Installing collected packages: ConfigParser
Successfully installed ConfigParser-5.2.0
Mission accomplished, let's try again!
$ ./w3af_console
Traceback (most recent call last):
File "./w3af_console", line 12, in <module>
from w3af.core.controllers.dependency_check.dependency_check import dependency_check
File "/Users/westonx/bin/w3af/w3af/core/controllers/dependency_check/dependency_check.py", line 26, in <module>
from w3af.core.data.db.startup_cfg import StartUpConfig
File "/Users/westonx/bin/w3af/w3af/core/data/db/startup_cfg.py", line 22, in <module>
import ConfigParser
ModuleNotFoundError: No module named 'ConfigParser'
Hmmm. Could swear we took care of that. Let's run pip (maybe pip3?) again to be sure?
$ pip3 install ConfigParser
Requirement already satisfied: ConfigParser in /Users/westonx/.pyenv/versions/3.8.2/lib/python3.8/site-packages (5.2.0)
Seems good. Let's check to see if the import path includes that directory:
$ python -c "import sys; print('\n'.join(sys.path)); import ConfigParser;"
/Users/westonx/.pyenv/versions/3.8.2/lib/python38.zip
/Users/westonx/.pyenv/versions/3.8.2/lib/python3.8
/Users/westonx/.pyenv/versions/3.8.2/lib/python3.8/lib-dynload
/Users/westonx/.pyenv/versions/3.8.2/lib/python3.8/site-packages
Traceback (most recent call last):
File "<string>", line 1, in <module>
ModuleNotFoundError: No module named 'ConfigParser'
So... we know the sys.path includes the directory pip says the module is installed in, but when we import it, python insists it's not there.
configparser-5.2.0.dist-info and configparser.py are indeed in my ~/.pyenv/versions/3.8.2/lib/python3.8/site-packages directory, so it doesn't look like pip telling me something that's not true. But it sure looks like python is.
I'm using pyenv on MacOS 10.14, not sure if that makes a difference. Anyone have ideas of what next steps should be?
ConfigParser is a built in library in Python, but its name was changed to configparser in Python 3. It appears like w3af is still using Python 2 (I found this check that actively states it, but you never even got that far). So, to run this code, you need to run it with Python 2.
There are very many (thousands) of python3 compatibility issues with the w3af codebase. The ConfigParser issue is just the first one you hit - the codebase is full of references to outdated / unmaintained libraries, and has no support for python3 byte strings vs. unicode strings (b"" vs ""), which are used throughout the codebase.
There is a w4af project on Github, where someone has made the effort to port all the w3af code to python3, but you didn't hear that from me.
I am not able to install the bz2 package in Python 3 Can please anyone guide
I followed the below commands
sudo yum install bzip2-devel
after that, I start my python 3.7 terminal and use the below command
import bz2
The error:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/local/sysopt/lib/python3.7/bz2.py", line 19, in <module>
from _bz2 import BZ2Compressor, BZ2Decompressor
ModuleNotFoundError: No module named '_bz2'
Based on the comments and the /usr/local/sysopt path, I assume you've installed Python 3.7 from a source package.
When you did that, the Python configure script checked whether it has the bits to compile the bz2 module, and as you didn't have bzip2-devel installed during that time, the builtin bz2 module didn't get compiled.
You will need to recompile and reinstall Python 3.7 to get it included. At that point, you may also want to pay heed to any other optional modules that inadvertently don't get installed; sqlite3 tends to usually be one that ends up missing!
I forked the scikit-learn repository, added a file that I need and downloaded the repository. I am not sure how to use this custom library. I cd'ed to the scikit-learn-master folder and tried to use it but it throws errors. So after reading the errors I installed it using python3 setup.py install. There were two setup.py files. One in the scikit-learn-master folder and sklearn folder so I ran python3 setup.py install at both these locations. They threw some warnings but no errors. I opened the python terminal in the scikit-learn-master folder and used import sklearn which returns the following -
Traceback (most recent call last):
File "/Users/shubhamgandhi/Desktop/scikit-learn-master/sklearn/__check_build/__init__.py", line 44, in <module>
from ._check_build import check_build # noqa
ModuleNotFoundError: No module named 'sklearn.__check_build._check_build'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/Users/shubhamgandhi/Desktop/scikit-learn-master/sklearn/__init__.py", line 128, in <module>
from . import __check_build
File "/Users/shubhamgandhi/Desktop/scikit-learn-master/sklearn/__check_build/__init__.py", line 46, in <module>
raise_build_error(e)
File "/Users/shubhamgandhi/Desktop/scikit-learn-master/sklearn/__check_build/__init__.py", line 41, in raise_build_error
%s""" % (e, local_dir, ''.join(dir_content).strip(), msg))
ImportError: No module named 'sklearn.__check_build._check_build'
___________________________________________________________________________
Contents of /Users/shubhamgandhi/Desktop/scikit-learn-master/sklearn/__check_build:
__init__.py __pycache__ _check_build.c
_check_build.pyx setup.py setup.pyc
___________________________________________________________________________
It seems that scikit-learn has not been built correctly.
If you have installed scikit-learn from source, please do not forget
to build the package before using it: run `python setup.py install` or
`make` in the source directory.
If you have used an installer, please check that it is suited for your
Python version, your operating system and your platform.
I am not sure how to proceed. Is there anything I am missing?
It appears the module has not been built correctly. And so it shows importError for check_build.
Before installing the module using pip, make sure you have installed all of the dependencies. On the README file, the mentioned packages are:
Python (>= 2.7 or >= 3.3)
NumPy (>= 1.8.2)
SciPy (>= 0.13.3)
For running the examples Matplotlib >= 1.1.1 is required.
If you are not planning on contributing to the project, but only using it, it is recommended that you download from https://pypi.python.org/pypi/scikit-learn instead of forking it.
View detailed instructions on how to install here.
After installing and building this way, if you still have issues, you can refer http://scikit-learn.org/stable/faq.html for FAQs.
I recently started out with python and i'm right now looking to do an app that shows my Twitter feed. So I downloaded a module(not sure if its called that) called Python-Twitter and installed it. But now everytime I try to import it I just get this error:
Traceback (most recent call last):
File "<pyshell#0>", line 1, in <module>
import twitter
File "build\bdist.win32\egg\twitter.py", line 38, in <module>
File "C:\Python27\lib\site-packages\requests_oauthlib-0.4.0-py2.7.egg\requests_oauthlib\__init__.py", line 1, in <module>
from .oauth1_auth import OAuth1
File "C:\Python27\lib\site-packages\requests_oauthlib-0.4.0-py2.7.egg\requests_oauthlib\oauth1_auth.py", line 4, in <module>
from requests.utils import to_native_string
ImportError: cannot import name to_native_string
Does anyone know what I might have done wrong with the install or something? Thx
In my case installing requests-oauthlib fixed it
sudo pip install requests-oauthlib
This is because of requests version.
requests.utils.to_native_string is available since requests 2.0.0
So just update requests:
pip install -U requests
See more details here on another thread
This sounds like an issue with your install. The method to_native_string should be defined in the requests\utils.py in your Python install.
I'm on Ubuntu, and installed the Twitter module, and can import it without any errors. When I look in my install, in /usr/lib/python2.7/dist-packages/requests/utils.py, there is a to_native_string method defined there.
The implication from the error you're getting is that in your installation, there is either no utils.py, or, if there is, it does not contain that method.
I would recommend checking your install to see if that is the case. If it is indeed missing, I would recommend axing your install and reinstalling. You might want to try a virtualenv environment instead, so it can act as a sandbox (in that case you can leave your current install as is, as long as it is intact enough to run virtualenv and pip).
If utils.py is actually there and does contain a method with that name, I would recommend running a debugger such as pudb or pdb (pudb isn't built in, but it's more full featured), and step through the import to see if that sheds any additional light.
I am trying to get Django running on a shared hosting account for which I have ssh access, but I have been having issues getting it working. When I first tried running django-admin.py, I received an error about the module 'functools' being missing. I had the hosting company install the functools package, but now I get the following traceback when I try to run django-admin.py.
Traceback (most recent call last):
File "manage.py", line 2, in <module>
from django.core.management import execute_manager
File "/usr/local/lib/python2.6/site-packages/Django-1.3-py2.6.egg/django/core/management/__init__.py", line 3, in <module>
from optparse import OptionParser, NO_DEFAULT
File "/usr/local/lib/python2.6/optparse.py", line 90, in <module>
from gettext import gettext
File "/usr/local/lib/python2.6/gettext.py", line 49, in <module>
import locale, copy, os, re, struct, sys
File "/usr/local/lib/python2.6/locale.py", line 98, in <module>
#functools.wraps(_localeconv)
AttributeError: 'module' object has no attribute 'wraps'
I opened a support ticket and was told by the company that they reinstalled Python 2.6, but that didn't change anything. I also tried with 2.4, which is also installed on the machine, but that resulted in the earlier ImportError: No module named functools error.
Does anybody have any ideas?
A likely cause is something shadowing the stdlib functools module. Do you have a functools.py alongside the main script (manage.py)? See what import functools; print functools.__file__ prints, inside manage.py (before any of the other imports.) If it doesn't print /usr/local/lib/python2.6/functools.py, there's probably a file shadowing the standard library module. If it does print that, something is wrong with that file, reinstalls notwithstanding.
this solution worked for me .
mv /usr/lib/python2.7/site-packages/pip* ./
yum reinstall python-pip
sudo pip install django
or try an another solution .
its too risky and this might not be a safest solution.but it worked fine for me .
uninstall pip.
pip uninstall pip
if you installed by get-pip.py .
python -m pip uninstall pip setuptools
navigate to the path.
/usr/lib/python2.7/site-packages/
and find out two pip directories pip and pip-6.0.8.dist-info.
remove both pip and pip-6.0.8.dist-info.
then try again.
yum install python-pip
or
python get-pip.py