Does Python version 2.7 have bcrypt in its library?
I tried import bcrypt and got the following error:
Traceback (most recent call last):
File "register.py", line 7, in <module>
import bcrypt
ImportError: No module named bcrypt
bcrypt is available as a pip package for python 2.7, so yes, it supports python 2.7.
It does not come by default with your python installation though, you need to pip install bcrypt in your python environment to import bcrypt successfully
As jonsharpe mentioned, bcrypt is not in standard python library, but it can be easily installed and used in python 2.7
From terminal, just try
sudo pip install bcrypt
And you should be able to do
import bcrypt
without issue.
The following error for me was caused by an upgrade in the version of python.
There are two ways to fix, you can downgrade to the old version of python or you can purge that old version by running the following commands.
sudo apt-get clean
&&
sudo apt-get autoremove --purge
&&
sudo apt-get remove python
&&
sudo apt-get autoremove
Then create a virtualenv with the new python version and install your dependencies. All the best!
Related
I had python3.5 minimal in my Ubuntu 16.04. I upgraded it to python3.6 using the following commands.
sudo add-apt-repository ppa:deadsnakes/ppa -y && sudo apt-get update
sudo apt-get install python3.6
Now, when i try to import bson or pymongo in python3.6.12 env, i get "No module name bson/pymongo".
But when i try to import bson or pymongo in python2.7, it gets imported without any error.
What am i missing?
Thanks in advance.
Python 2 and Python 3 install packages in different places. Any packages you installed for Python 2 will not be visible or usable from Python 3.
To use them from Python 3, install them again using Python 3.
This question already has answers here:
Python MySQLdb not importing
(7 answers)
Closed 3 years ago.
I'm going to connect to mysql database using python. My python version is 2.7.12 and I've installed MySQL using sudo yum install MySQL-python
Package MySQL-python26-1.2.3-11.14.amzn1.x86_64 already installed and latest version
Nothing to do
Linux version:
$ cat /etc/*-release
NAME="Amazon Linux AMI"
VERSION="2016.09"
ID="amzn"
ID_LIKE="rhel fedora"
VERSION_ID="2016.09"
But when I try to import MySQLdb package it gives an error:
$python
>>> import MySQLdb
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named MySQLdb
I've tried different ways as long as I found on the internet but it didn't work.
Any help would be appreciated.
Updated:
Required dependency library:
sudo yum install mysql-devel
Try running:
pip install MySQL-python
Make sure you have depending libraries installed.
For that you may run:
sudo dnf install python python-devel mysql-devel redhat-rpm-config gcc
As in your case sudo yum install mysql-devel did the job for you.
install pip and upgrade to the latest version.
apt-get install python-pip
pip install -U pip
Next, install the required development packages.
apt-get install python-dev libmysqlclient-dev
Then...
pip install MySQL-python
This should complete installation. After running these commands successfully, try importing MySQLdb in python interpreter.
>>> import MySQLdb
I am trying to pip install the MySQL-python package, but I get an ImportError.
Jans-MacBook-Pro:~ jan$ /Library/Frameworks/Python.framework/Versions/3.3/bin/pip-3.3 install MySQL-python
Downloading/unpacking MySQL-python
Running setup.py egg_info for package MySQL-python
Traceback (most recent call last):
File "<string>", line 16, in <module>
File "/var/folders/lf/myf7bjr57_jg7_5c4014bh640000gn/T/pip-build/MySQL-python/setup.py", line 14, in <module>
from setup_posix import get_config
File "./setup_posix.py", line 2, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
Complete output from command python setup.py egg_info:
Traceback (most recent call last):
File "<string>", line 16, in <module>
File "/var/folders/lf/myf7bjr57_jg7_5c4014bh640000gn/T/pip-build/MySQL-python/setup.py", line 14, in <module>
from setup_posix import get_config
File "./setup_posix.py", line 2, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
----------------------------------------
Command python setup.py egg_info failed with error code 1 in /var/folders/lf/myf7bjr57_jg7_5c4014bh640000gn/T/pip-build/MySQL-python
Storing complete log in /Users/jan/.pip/pip.log
Jans-MacBook-Pro:~ jan$
Any ideas?
You can instead use the mysqlclient package as a drop-in replacement for MySQL-python. It is a fork of MySQL-python with added support for Python 3.
I had luck with simply
pip install mysqlclient
in my python3.4 virtualenv after
sudo apt-get install python3-dev libmysqlclient-dev
which is obviously specific to ubuntu/debian, but I just wanted to share my success :)
In Python 3, ConfigParser has been renamed to configparser for PEP 8 compliance. It looks like the package you are installing does not support Python 3.
Here is a code that should work in both Python 2.x and 3.x
Obviously you will need the six module, but it's almost impossible to write modules that work in both versions without six.
try:
import configparser
except:
from six.moves import configparser
pip install configparser
sudo cp /usr/lib/python3.6/configparser.py /usr/lib/python3.6/ConfigParser.py
Then try to install the MYSQL-python again.
That Worked for me
MySQL-python is not supported on python3 instead of this you can use mysqlclient
If you are on fedora/centos/Red Hat install following package
yum install python3-devel
pip install mysqlclient
Additional info:
Python 2x
import ConfigParser
Python 3x
import configparser
Compatibility of Python 2/3 for configparser can be solved simply by six library
from six.moves import configparser
If you are using CentOS, then you need to use
yum install python34-devel.x86_64
yum groupinstall -y 'development tools'
pip3 install mysql-connector
pip install mysqlclient
I was having the same problem. Turns out, I needed to install python3 devel on my centos. First, you need to search for the package that is compatible with your system.
yum search python3 | grep devel
Then, install the package as:
yum install -y python3-devel.x86_64
Then, install mysqlclient from pip
pip install mysqlclient
Do pip3 install PyMySQL and then pip3 install mysqlclient.
Worked for me
I got further with Valeres answer:
pip install configparser
sudo cp /usr/lib/python3.6/configparser.py /usr/lib/python3.6/ConfigParser.py
Then try to install the MYSQL-python again. That Worked for me
I would suggest to link the file instead of copy it. It is save to update. I linked the file to /usr/lib/python3/ directory.
For me the following command worked:
sudo python3 -m pip install mysql-connector
Try this solution which worked fine for me.
Basically it's to reinstall/upgrade to latest version of mysql from brew, and then installing mysqlclient or MySQL-Python from global pip3 instead of virtualenv pip3.
Then accessing the virtualenv and successfully install mysqlclient or MySQL-Python.
I still have this issue, so I go to /usr/lib/python3.8 and type as sudoer:
cp configparser.py ConfigParser.py
You may have another python version than 3.8.
Following #MaciejNg I tried making a copy, which didn't work:
sudo cp ./env/lib/python3.8/site-packages/configparser.py ./env/lib/python3.8/site-packages/ConfigParser.py
Because configparser.py and ConfigParser.py are identical, I renamed the file:
sudo mv ./env/lib/python3.8/site-packages/configparser.py ./env/lib/python3.8/site-packages/ConfigParser.py
how about checking the version of Python you are using first.
import six
if six.PY2:
import ConfigParser as configparser
else:
import configparser
I run kali linux- Rolling and I came across this problem ,when I tried running cupp.py in the terminal, after updating to python 3.6.0. After some research and trial I found that changing ConfigParser to configparser worked for me but then I came across another issue.
config = configparser.configparser()
AttributeError: module 'configparser' has no attribute 'configparser'
After a bit more research I realised that for python 3 ConfigParser is changed to configparser but note that it has an attribute ConfigParser().
I was getting the same error on Mac OS 10, Python 3.7.6 & Django 2.2.7. I want to use this opportunity to share what worked for me after trying out numerous solutions.
Steps
Installed Connector/Python 8.0.20 for Mac OS from link
Copy current dependencies into requirements.txt file, deactivated the current virtual env, and deleted it using;
create the file if not already created with; touch requirements.txt
copy dependency to file; python -m pip3 freeze > requirements.txt
deactivate and delete current virtual env; deactivate && rm -rf <virtual-env-name>
Created another virtual env and activated it using; python -m venv <virtual-env-name> && source <virtual-env-name>/bin/activate
Install previous dependencies using; python -m pip3 install -r requirements.txt
base on your OS is centos use python3
if you don't known where is configparser.py or ConfigParser.py
pip3 install configparser
find / -name "configparser.py"
cd /usr/local/lib/python3.6/site-packages(base on your environment )
cp configparser.py ConfigParser.py
solved the issue
Kindly to see what is /usr/bin/python pointing to
if it is pointing to python3 or higher change to python2.7
This should solve the issue.
I was getting install error for all the python packages. Abe Karplus's solution & discussion gave me the hint as to what could be the problem.
Then I recalled that I had manually changed the /usr/bin/python from python2.7 to /usr/bin/python3.5, which actually was causing the issue. Once I reverted the same. It got solved.
This worked for me
cp /usr/local/lib/python3.5/configparser.py /usr/local/lib/python3.5/ConfigParser.py
In installation process of OpenERP 6, I want to generate a config file with these commands:
cd /home/openerp/openerp-server/bin/
./openerp-server.py -s --stop-after-init -c /home/openerp/openerp-server.cfg
But it always showed the message: ImportError: No module named psycopg2
When I checked for psycopg2 package, it's already installed. Package python-psycopg2-2.4.5-1.rhel5.x86_64 is already installed to its latest version. Nothing to do. What's wrong with this? My server is CentOS, I've installed Python 2.6.7.
Step 1: Install the dependencies
sudo apt-get install build-dep python-psycopg2
Step 2: Run this command in your virtualenv
pip install psycopg2-binary
Ref: Fernando Munoz
Use psycopg2-binary instead of psycopg2.
pip install psycopg2-binary
Or you will get the warning below:
UserWarning: The psycopg2 wheel package will be renamed from release 2.8; in order to keep installing from binary please use "pip install psycopg2-binary" instead. For details see: http://initd.org/psycopg/docs/install.html#binary-install-from-pypi.
Reference: Psycopg 2.7.4 released | Psycopg
I faced the same issue and resolved it with following commands:
sudo apt-get install libpq-dev
pip install psycopg2
Try installing
psycopg2-binary
with
pip install psycopg2-binary --user
Please try to run the command import psycopg2 on the python console. If you get the error then check the sys.path where the python look for the install module. If the parent directory of the python-psycopg2-2.4.5-1.rhel5.x86_64 is there in the sys.path or not. If its not in the sys.path then run export PYTHONPATH=<parent directory of python-psycopg2-2.4.5-1.rhel5.x86_64> before running the openerp server.
Import Error on Mac OS
If psycopg2 is getting installed but you are unable to import it in your .py file then the problem is libpq, its linkages, and the library openssl, on which libpq depends upon. The overall steps are reproduced below. You can check it step by step to know which is the source of error for you and then you can troubleshoot from there.
Check for the installation of the openssl and make sure it's working.
Check for installation of libpq in your system it may not have been installed or not linked. If not installed then install it using the command brew install libpq. This installs libpq library. As per the documentation
libpq is the C application programmer's interface to PostgreSQL. libpq is a set of library functions that allow client programs to pass queries to the PostgreSQL backend server and to receive the results of these queries.
Link libpq using brew link libpq, if this doesn't work then use the command: brew link libpq --force.
Also put in your .zshrc file the following export PATH="/usr/local/opt/libpq/bin:$PATH". This creates all the necessary linkages for libpq library .
Now restart the terminal or use the following command source ~/.zshrc.
Now use the command pip install psycopg2. It will work.
This works, even when you are working in conda environment.
N.B. pip install psycopg2-binaryshould be avoided because as per the developers of the psycopg2 library
The use of the -binary packages in production is discouraged because in the past they proved unreliable in multithread environments. This might have been fixed in more recent versions but I have never managed to reproduce the failure.
Try with these:
virtualenv -p /usr/bin/python3 test_env
source test_env/bin/activate
pip install psycopg2
run python and try to import if you insist on installing it on your systems python try:
pip3 install psycopg2
Recently faced this issue on my production server. I had installed pyscopg2 using
sudo pip install psycopg2
It worked beautifully on my local, but had me for a run on my ec2 server.
sudo python -m pip install psycopg2
The above command worked for me there. Posting here just in case it would help someone in future.
sudo pip install psycopg2-binary
You need to install the psycopg2 module.
On CentOS:
Make sure Python 2.7+ is installed. If not, follow these instructions: http://toomuchdata.com/2014/02/16/how-to-install-python-on-centos/
# Python 2.7.6:
$ wget http://python.org/ftp/python/2.7.6/Python-2.7.6.tar.xz
$ tar xf Python-2.7.6.tar.xz
$ cd Python-2.7.6
$ ./configure --prefix=/usr/local --enable-unicode=ucs4 --enable-shared LDFLAGS="-Wl,-rpath /usr/local/lib"
$ make && make altinstall
$ yum install postgresql-libs
# First get the setup script for Setuptools:
$ wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py
# Then install it for Python 2.7 and/or Python 3.3:
$ python2.7 ez_setup.py
$ easy_install-2.7 psycopg2
Even though this is a CentOS question, here are the instructions for Ubuntu:
$ sudo apt-get install python3-pip python-distribute python-dev
$ easy_install psycopg2
Cite: http://initd.org/psycopg/install/
For python3 on ubuntu, this worked for me:
$sudo apt-get update
$sudo apt-get install libpq-dev
$sudo pip3 install psycopg2-binary
i have the same problem, but this piece of snippet alone solved my problem.
pip install psycopg2
Run into the same issue when I switch to Ubuntu from Windows 10.. the following worked for me.. this after googling and trying numerous suggestions for 2 hours...
sudo apt-get install libpq-dev
then
pip3 install psycopg2
I hope this helps someone who has encountered the same problem especially when switching for windows OS to Linux(Ubuntu).
I have done 2 things to solve this issue:
use Python 3.6 instead of 3.8.
change Django version to 2.2 (may be working with some higher but I change to 2.2)
For Python3
Step 1: Install Dependencies
sudo apt-get install python3 python-dev python3-dev
Step 2: Install
pip install psycopg2
check correctly if you had ON your virtual env of your peoject, if it's OFF then make it ON. execute following cammands:
workon <your_env_name>
python manage.py runserver
It's working for me
It's very simple, not sure why nobody mentioned this for mac before.
brew install postgresql
pip3 install psycopg2
In simple terms, psycopg2 wants us to install postgres first.
PS: Don't forget to upvote, so that it can help other people as well.
Solved the issue with below solution :
Basically the issue due to _bz2.cpython-36m-x86_64-linux-gnu.so Linux package file. Try to find the the location.
Check the install python location ( which python3)- Example: /usr/local/bin/python3
copy the file under INSTALL_LOCATION/lib/python3.6
cp -rvp /usr/lib64/python3.6/lib-dynload/_bz2.cpython-36m-x86_64-linux-gnu.so /usr/local/lib/python3.6
try:
pip install psycopg2 --force-reinstall --no-cache-dir
Python2 importerror no module named psycopg2
pip install psycopg2-binary
Requirement already satisfied...
Solved by following steps:
sudo curl https://bootstrap.pypa.io/pip/2.7/get-pip.py -o get-pip.py
sudo python get-pip.py
sudo python -m pip install psycopg2-binary
pip install psycopg-binary
The line above helped me
For Python3 use this:
sudo apt-get install -y python3-psycopg2
I'm having a strange problem while trying to install the Python library zenlib, using its setup.py file. When I run the setup.py file, I get an import error, saying
ImportError: No module named Cython.Distutils`
but I do have such a module, and I can import it on the python command line without any trouble. Why might I be getting this import error?
I think that the problem may have to do with the fact that I am using Enthought Python Distribution, which I installed right beforehand, rather than using the Python 2.7 that came with Ubuntu 12.04.
More background:
Here's exactly what I get when trying to run setup.py:
enwe101#enwe101-PCL:~/zenlib/src$ sudo python setup.py install
Traceback (most recent call last):
File "setup.py", line 4, in <module>
from Cython.Distutils import build_ext
ImportError: No module named Cython.Distutils
But it works from the command line:
>>> from Cython.Distutils import build_ext
>>>
>>> from fake.package import noexist
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named fake.package
Note the first import worked and the second throws an error. Compare this to the first few lines of setup.py:
#from distutils.core import setup
from setuptools import setup
from distutils.extension import Extension
from Cython.Distutils import build_ext
import os.path
I made sure that the Enthought Python Distribution and not the python that came with Ubuntu is what is run by default by prepending my bash $PATH environment variable by editing ~/.bashrc, adding this as the last line:
export PATH=/usr/local/epd/bin:$PATH
and indeed which python spits out /usr/local/epd/bin/python... not knowing what else to try, I went into my site packages directory, (/usr/local/epd/lib/python2.7/site-packages) and give full permissions (r,w,x) to Cython, Distutils, build_ext.py, and the __init__.py files. Probably silly to try, and it changed nothing.
Can't think of what to try next!? Any ideas?
Install Cython:
pip install cython
Your sudo is not getting the right python. This is a known behaviour of sudo in Ubuntu. See this question for more info. You need to make sure that sudo calls the right python, either by using the full path:
sudo /usr/local/epd/bin/python setup.py install
or by doing the following (in bash):
alias sudo='sudo env PATH=$PATH'
sudo python setup.py install
For python3 use
sudo apt-get install cython3
For python2 use
sudo apt-get install cython
Details can be read at this
Run
which python
Thats the path to the python that your system has defaulted too
then go to #tiago's method of:
sudo <output of which python> setup.py install
I only got one advice for you : Create a virtualenv. This will ensure you have only one version of python and all your packages installed locally (and not on your entire system).
Should be one of the solutions.
In the CLI-python, import sys and look what's inside sys.path
Then try to use export PYTHONPATH=whatyougot
Running the following commands resolved the issue for me in ubuntu 14.04:
sudo apt-get install python-dev
sudo apt-get install libusb-1.0-0-dev
sudo apt-get install libsystemd-daemon-dev
sudo pip install cython
This link helped me: https://github.com/trezor/python-trezor/issues/40
Ran into this again in modern times. The solution was simple:
pip uninstall cython && pip install cython
Read like a thousand of these threads and finally got it for Python 3. (replace pip with pip3 if you have that kind of installation, and run pip uninstall cython if you have tried other solutions before running any of these)
Mac:
brew install cython
pip install --upgrade cython
Ubuntu
sudo apt-get install cython3 python-dev
pip install --upgrade cython
Windows (must have conda, and MinGW already in path)
conda install cython
conda install --upgrade cython
That is easy.
You could try install cython package first.
It will upgrade your easy_install built in python.
I had dependency from third party library on Cython, didn't manage to build the project on Travis due to the ImportError. In case someone needs it - before installing requirements.txt run this command:
pip install Cython --install-option="--no-cython-compile"
Installing GCC also might help.
Just install Cython from
http://cython.org/#download
and install it using this command
sudo python setup.py install
Then run the command
sudo python -c 'import Cython.Distutils'
and it will be installed and the error message will disappear.