I have seen many threads that have a high level of ambiguity and go off on tangents from the original question, often assuming much about the authors ability, so I am hoping that if I am direct and concise with my information, I will get an answer that is in line with the requirement. I know that the serious programmers will have seen this many times, in many formats, so please just bear with me as this is doing my head in. Please do not just post a link to some other answer as I rarely find that helps with my current issue.
I am not a hardcore programmer, I find the compiling, sourceball, tar, gz all nonsense to be honest and am looking for the easiest way to install sip for python on my machine. I have installed various versions of mingw32, mingw64 to the point that I don't know which one is best to use. I am assuming that the one here: C:\Program Files\mingw-w64 is the one, considering I am using 64 bit, but do the others I have installed impact on this?
I also installed versions of mysys:
C:\msys\1.0,
C:\msys64, but I still m unclear what and why etc, despite trying to read the docs that came with them.
I have windows 10, 64 bit professional edition.
I have python 2.7
I have installs of mingw, 32 bit and 64 bit in various locations, due mostly to not fully understanding what exactly it was or where it should go. I found zips of it and exes, so I got a bit confused.
I downloaded the sip package and unpacked it to here: C:\Python27\Lib\site-packages\sip-4.19.3 and it has the configure.py file in it. So far, so good.
I used a CMD window, changed directory to: C:\Python27\Lib\site-packages\sip-4.19.3 and then used the command: python configure.py to create the Makefile file which is what I believe is supposed to happen.
I then opened the mingw64 shell, changed directory to the above sip folder and typed: python configure.py again, just to be sure I would get a response and create the files again, probably should not have done so, but hey ho, at this point, I am quite frustrated with it and trying to do anything with what I have, which I know is poor practice. (see image 1.)
image 1: configure.py executed
From what I have read, I should use the make function that comes with Mingw64, but I tried the following, which also includes the configure.py code, but nothing seems to work when trying to use the Makefile file that was created via the configure.py process.
c:\Python27>cd ./Lib/site-packages/sip-4.19.3
c:\Python27\Lib\site-packages\sip-4.19.3> python configure.py
This is SIP 4.19.3 for Python 2.7.13 on win32.
The SIP code generator will be installed in C:\Python27.
The sip module will be installed in C:\Python27\Lib\site-packages.
The sip.pyi stub file will be installed in C:\Python27\Lib\site-packages.
The sip.h header file will be installed in C:\Python27\include.
The default directory to install .sip files in is C:\Python27\sip.
Creating siplib\sip.h...
Creating siplib\siplib.c...
Creating siplib\siplib.sbf...
Creating sipconfig.py...
Creating top level Makefile...
Creating sip code generator Makefile...
Creating sip module Makefile...
c:\Python27\Lib\site-packages\sip-4.19.3> Makefile
'Makefile' is not recognized as an internal or external command,
operable program or batch file.
c:\Python27\Lib\site-packages\sip-4.19.3> make Makefile
make: Nothing to be done for `Makefile'.
c:\Python27\Lib\site-packages\sip-4.19.3> Makefile Makefile
'Makefile' is not recognized as an internal or external command,
operable program or batch file.
c:\Python27\Lib\site-packages\sip-4.19.3>
So now I am at an impasse. I have the locations of my mingw versions and the msys in my path environment variable and I have done just about everything I have looked at on the web. I realise that its an order of things, but I really wish there were just executables for these modules and supporting tools as this compiling is a ball ache.I tried opening a python shell and importing sip.
>>> import os, sys
>>> import sip
Traceback (most recent call last):
File "<pyshell#1>", line 1, in <module>
import sip
ImportError: No module named sip
>>> import sipconfig
Traceback (most recent call last):
File "<pyshell#2>", line 1, in <module>
import sipconfig
ImportError: No module named sipconfig
>>> from sip import sip
Traceback (most recent call last):
File "<pyshell#3>", line 1, in <module>
from sip import sip
ImportError: No module named sip
>>> from sipconfig impport sip
SyntaxError: invalid syntax
>>> from sip import *
Traceback (most recent call last):
File "<pyshell#5>", line 1, in <module>
from sip import *
ImportError: No module named sip
So, if anyone has read through this and has a definitive answer as to what I am doing wrong, I would appreciate it.
make/nmake or make/nmake install cant be done from cmd and python path; instead using mingw or visual studio tools.
In windows search for prompt or Visual studio tools to open VS Command promt and from there cd--> sip file location (before this run configure.py present in sip folder)
Now run the commands nmake and then nmake install
Related
I am having trouble installing a custom python module I have written.
Here are my steps so far:
Navigate to the module directory C:\Users\myname\repos\mymodulename where the setup.py file is in the anaconda prompt. Type: python setup.py install
The command prompt returns (plus some other things)
Extracting mymodulename-0.1-py3.7.egg to c:\users\myname\appdata\local\continuum\anaconda3\lib\site-packages
mymodulename 0.1 is already the active version in easy-install.pth
Installing myclass-script.py script to C:\Users\myname\AppData\Local\Continuum\anaconda3\Scripts
Installing myclass.exe script to C:\Users\myname\AppData\Local\Continuum\anaconda3\Scripts
Installed c:\users\myname\appdata\local\continuum\anaconda3\lib\site-packages\mymodulename-0.1-py3.7.egg
Processing dependencies for mymodulename==0.1
...
Using c:\users\myname\appdata\local\continuum\anaconda3\lib\site-packages
Finished processing dependencies for mymodulename==0.1
To me that looks like it has installed. Opening up the console and trying to import:
>>> import mymodulename.myclassas ce
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ModuleNotFoundError: No module named 'mymodulename'
>>>
It appears in hasn't. Checking the list of modules in anaconda with help('modules') confirms that it has not been imported.
I thought that perhaps i had installed it to the wrong environment:
(base) C:\Users\myname>conda env list
# conda environments:
#
base * C:\Users\myname\AppData\Local\Continuum\anaconda3
py2 C:\Users\myname\AppData\Local\Continuum\anaconda3\envs\py2
Only a python 2 environment which mymodule wouldn't be compatible with.
Does anyone have any suggestions about what I can try to resolve this? Happy to elaborate on any of the points
Thanks in advance.
EDIT: Some more information that may be relevant.
This package was initially installed in site-packages. I have reinstalled there and the package works. The reason I moved the package is because I am aware it is bad practice to store custom packages there.
I'm using PyGObject/GTK+ with Python3.7 on Windows and is worried about how to package my app. With official Python ecosystem, it's easy to use freezers and venvs. However, the PyGObject and GTK+ on Windows requires the MingW environment to run.
Does this mean that I have to package the entire MingW, along with GTK+?
How should I freeze the app?
Since no one cares soon enough, I'll report my findings here. The short answer, as of the date I write this post, is: The PyGObject eco-system is not commercial-ready on Windows, although nothing stops you from shipping a functional app.
The deal-breaker is the lack of functional freezers on Windows for PyGOBject. So you can't really ship a closed-source commercial product with it (although one could argue that the entire Python eco-system is not made for that). The freezers that I tried:
The officially recommended PyInstaller right now does not install with the officially recommended msys/MingGW universe; Even after building PyInstaller from source, the frozen .exe crashes with complaints about missing modules. Below is the crash report from a hello-world app.
$ app.exe
[8340] mod is NULL - structTraceback (most recent call last):
File "C:/Apps/msys64/mingw64/lib/python3.7/struct.py", line 13, in <module>
from _struct import *
ModuleNotFoundError: No module named '_struct'
[8340] mod is NULL - pyimod02_archiveTraceback (most recent call last):
File "C:/Apps/msys64/mingw64/lib/python3.7/site-packages/pyinstaller-3.5-py3.7.egg/PyInstaller/loader/pyimod02_archive.py", line 28, in <module>
import struct
ModuleNotFoundError: No module named 'struct'
[8340] mod is NULL - pyimod03_importersTraceback (most recent call last):
File "C:/Apps/msys64/mingw64/lib/python3.7/site-packages/pyinstaller-3.5-py3.7.egg/PyInstaller/loader/pyimod03_importers.py", line 24, in <module>
from pyimod02_archive import ArchiveReadError, ZlibArchiveReader
ModuleNotFoundError: No module named 'pyimod02_archive'
Traceback (most recent call last):
File "site-packages/pyinstaller-3.5-py3.7.egg/PyInstaller/loader/pyiboot01_bootstrap.py", line 15, in <module>
ModuleNotFoundError: No module named 'pyimod03_importers'
[8340] Failed to execute script pyiboot01_bootstrap
cx_Freeze, another prominent alternative, does not build/install on MingW, either. You end up with gcc woes, no matter how many gcc variants you install.
py2exe is now abandonware since Python 3.4.
Since a PyGObject app still runs with MinGW python, it's not impossible to ship such an app for Windows. But that means you'll go with the big baggage and figure out a way to pack everything yourself. Let alone maintain the whole mess. Mind you that the procedure will be different on Mac if your app is cross-platform. PyInstaller works on Mac according to my test.
QuodLibet provides an example of how to ship an open-source software based on PyGObject. Unfortunately, as of today, the upstream's packaging procedure fails at the build.sh run on my Windows 10:
copying data/quodlibet.zsh -> E:\_dev\quodlibet\win_installer\_build_root\mingw64\share\zsh\vendor-completions\_quodlibet
Traceback (most recent call last):
File "E:/_dev/quodlibet/win_installer/misc/depcheck.py", line 141, in <module>
main(sys.argv)
File "E:/_dev/quodlibet/win_installer/misc/depcheck.py", line 130, in main
libs = get_things_to_delete(sys.prefix)
File "E:/_dev/quodlibet/win_installer/misc/depcheck.py", line 108, in get_things_to_delete
for lib in get_dependencies(path):
File "E:/_dev/quodlibet/win_installer/misc/depcheck.py", line 66, in get_dependencies
data = data.decode("utf-8")
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xa3 in position 72: invalid start byte
This turns out to be an easy fix: locale issue on non-UTF8 Windows.
A trivial patch would be replacing "utf-8" with locale.getdefaultlocale(). After that, the build succeeds.
However, the global distribution issues remain challenging:
Bloated pipeline: The officially recommended msys2 build system basically drags the entire GNOME universe and much of the Python universe to your machine, while you may already have a Python environment on your native Windows. It proves hard to cherry-pick the necessary dependencies among this whole pile of stuff.
Extra C pipeline required to build the executable. To build a Windows executable without a freezer, you must create your app as a Python package (big hassle), install it to your msys2-Python site-packages (another setup.py hassle), and then build a wrapper C application using the Python C API (opaque hassle). The process is not transparent, especially when Python packaging system is sensitive to working directory and path differences. Launching the executable can easily go wrong without much debug info.
Manual stripping. As mentioned above, you must manually cherry-pick dependencies or your app would be shipped with basically the entire msys2/MinGW universe that's worth 100MB+ for a hello-world app.
I recently added a tool to my makefile's toolchain that is written in python. It processes .json input and outputs some assembly data, and when in run the python tool from the console (e.g. python xxx.py -o yyy.s zzz.json) it works quite well. However when the same script is run from within the makefile, suddenly package imports fail (concretly spoken those I installed using pip).
The makefile outputs the following error:
Traceback (most recent call last):
File "tools/pyset2s.py", line 2, in <module>
import pymap.tileset
File "/cygdrive/d/Hacking/__Violet_Sources/tools/pymap/tileset.py", line 3, in <module>
from . import image, palette, agbimg
File "/cygdrive/d/Hacking/__Violet_Sources/tools/pymap/image.py", line 3, in <module>
import png
ImportError: No module named png
make: *** [makefile:135: bld/map/tileset/gfx_maptileset0.s] Error 1
make: *** Waiting for unfinished jobs....
The only cause of this problem I figured so far might be, that the package (in this case PyPng, but I suppose it will also fail on the other ones (being Pilow and numpy) was installed while being in administrator mode (I am working under Windows and using a cygwin shell for the make call). However reinstalling the package did not work, since I am told, that the requirements are already satisfied. I also do not know who to promote my IDE (I am using Netbeans) to use adminstrator rights when running the make command.
Is there any solution to that?
I'm running Debian 6.0.6
I've downloaded latest version of libtorrent-rasterbar from here: http://code.google.com/p/libtorrent/downloads/detail?name=libtorrent-rasterbar-0.16.6.tar.gz&can=2 and installed it:
./configure --enable-python-binding
make
make install
cd bindings/python
python setup.py build
python setup.py install
now I want to test whether the library works:
>>> import libtorrent
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: libtorrent-rasterbar.so.7: cannot open shared object file: No such file or directory
The packaged version of libtorrent from the distributive's repository had some funny behaviour (complaining on boost dependences), so I've decided to upgrade. The same situation is on both of my debian boxes, yet ubuntu box is fine.
old error message from my debian box:
File "ar.py", line 15, in create
s.start_dht()
Boost.Python.ArgumentError: Python argument types in
session.start_dht(session)
did not match C++ signature:
start_dht(libtorrent::session {lvalue}, libtorrent::entry)
Search for the shared object file and add it to your path.
sudo updatedb
locate libtorrent-rasterbar.so.7
This should output /<path_to_directory>/libtorrent-rasterbar.so.7
Add this to your ~/.profile or temporarily tell Python where to look:
export LD_LIBRARY_PATH=/<path_to_directory>/
See more detailed installation instructions here.
I cannot use sqlite3 (build python package), for the reason that _sqlite3.so file is missing. I found that people had the same problem and they resolved it here. To solve my problem I have to "install sqlite3 and recompile Python". I also found out that the problem can be solved by "building from source and moving the library to /usr/lib/python2.5/lib-dynload/".
As I have been told to here, I have to install sqlite from the source and copy newly compiled files to my Python directory (nothing was said about "recompile Python"). Well, I have installed sqlite and now I have to copy something to my /lib-dynload/ directory.
I am not sure what exactly I should copy. In my /lib-dynload/ directory I have only .so files. And in my sqlite-3.6.18 I do not have any *.so files (it makes me suspicious). I had this problem since I did not have _sqlite3.so file in /lib-dynload/. By compilation of sqlite I got some new files (for example sqlite3.o and sqlite3.lo) but not _sqlite3.so.
P.S. Some details:
1. I use Python 2.6.2 (which I installed locally).
2. I do not have root permissions.
3. I had already sqlite installed globally on the machine by root.
4. I just installed sqlite locally.
5. My OS is CentOS release 5.3 (Final).
6. When I type in Python command line import sqlite3 I get:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/loctopu/opt/lib/python2.6/sqlite3/__init__.py", line 24, in <module>
from dbapi2 import *
File "/home/loctopu/opt/lib/python2.6/sqlite3/dbapi2.py", line 27, in <module>
from _sqlite3 import *
ImportError: No module named _sqlite3
I don't have exact answer, but few hints here
To install python from source, you don't need to be root, you can always install at /home/USERNAME/usr, for example when you do configure, do like ./configure --prefix=/home/USERNAME/usr
Installing sqlite binaries does not mean its included python extension (instead, sqlite dev files are needed when you compile python)
proper import usage of sqlite3 is import sqlite3