Related
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I'm somewhat new to both Python and Pygame, and trying to simply read MIDI controls live from a Windows computer. I've looked into Pygame and have set up what I think to be most of the right syntaxes, but the shell seems to crash or at least reset at the line pygame.midi.Input(input_id) every time.
import pygame.midi
import time
pygame.init()
pygame.midi.init()
print("The default input device number is " + str(pygame.midi.get_default_input_id()))
input_id = int(pygame.midi.get_default_input_id())
clock = pygame.time.Clock()
crashed = False
while (crashed == False):
print("input:")
pygame.midi.Input(input_id)
print(str(pygame.midi.Input.read(10)))
clock.tick(2)
I am also new to both Python and and Pygame.
I also tried for quite some time to get the midi input reading to work. In another forum I was pointed to an included sample file in the library. You can see the answer here.
Side note:
On my computer there are several Midi devices active. So it maybe would be a good idea to not rely on the default input id. You can get a list of your Midi devices like this:
import pygame
from pygame.locals import *
from pygame import midi
def printMIDIDeviceList():
for i in range(pygame.midi.get_count()):
print(pygame.midi.get_device_info(i), i)
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I am just writing a small Python game for fun and I have a function that does the beginning narrative.
I am trying to get the audio to play in the background, but unfortunately the MP3 file plays first before the function continues.
How do I get it to run in the background?
import playsound
def displayIntro():
playsound.playsound('storm.mp3',True)
print('')
print('')
print_slow('The year is 1845, you have just arrived home...')
Also, is there a way of controlling the volume of the playsound module?
I am using a Mac, and I am not wedded to using playsound. It just seems to be the only module that I can get working.
Just change True to False (I use Python 3.7.1)
import playsound
playsound.playsound('storm.mp3', False)
print ('...')
In Windows:
Use winsound.SND_ASYNC to play them asynchronously:
import winsound
winsound.PlaySound("filename", winsound.SND_ASYNC | winsound.SND_ALIAS )
To stop playing
winsound.PlaySound(None, winsound.SND_ASYNC)
On Mac or other platforms:
You can try this Pygame/SDL
pygame.mixer.init()
pygame.mixer.music.load("file.mp3")
pygame.mixer.music.play()
There is a library in Pygame called mixer and you can add an MP3 file to the folder with the Python script inside and put code like this inside:
from pygame import mixer
mixer.init()
mixer.music.load("mysong.mp3")
mixer.music.play()
Well, you could just use pygame.mixer.music.play(x):
#!/usr/bin/env python3
# Any problems contact me on Instagram, #vulnerabilties
import pygame
pygame.mixer.init()
pygame.mixer.music.load('filename.extention')
pygame.mixer.music.play(999)
# Your code here
A nice way to do it is to use vlc. Very common and supported library.
pip install python-vlc
Then writing your code
import vlc
#Then instantiate a MediaPlayer object
player = vlc.MediaPlayer("/path/to/song.mp3")
#And then use the play method
player.play()
#You can also use the methods pause() and stop if you need.
player.pause()
player.stop
#And for the super fancy thing you can even use a playlist :)
playlist = ['/path/to/song1.mp3', '/path/to/song2.mp3', '/path/to/song3.mp3']
for song in playlist:
player = vlc.MediaPlayer(song)
player.play()
You could try just_playback. It's a wrapper I wrote around miniaudio that plays audio in the background while providing playback control functionality like pausing, resuming, seeking and setting the playback volume.
from pygame import mixer
mixer.music.init()
mixer.music.load("audio.mp3") # Paste The audio file location
mixer.play()
Use vlc
import vlc
player = None
def play(sound_file):
global player
if player is not None:
player.stop()
player = vlc.MediaPlayer("file://" + sound_file)
player.play()
This is a solution to reproduce similar length sounds. This solution worked to me to solve the error:
The specified device is not open or recognized by MCI.
Here follow the syntax as a class method, but you can change it to work even without a class.
Import these packages:
import multiprocessing
import threading
import time
Define this function:
def _reproduce_sound_nb(self, str_, time_s):
def reproduce_and_kill(str_, time_sec=time_s):
p = multiprocessing.Process(target=playsound, args=(str_,))
p.start()
time.sleep(time_sec)
p.terminate()
threading.Thread(target=reproduce_and_kill, args=(str_, time_s), daemon=True).start()
In the main program/method:
self._reproduce_sound_nb(sound_path, 3) # path to the sound, seconds after sound stop -> to manage the process end
I used a separate thread to play the sound without blocking the main thread. It works on Ubuntu as well.
from threading import Thread
from playsound import playsound
def play(path):
"""
Play sound file in a separate thread
(don't block current thread)
"""
def play_thread_function:
playsound(path)
play_thread = Thread(target=play_thread_function)
play_thread.start()