I have more than one line on a bokeh plot, and I want the HoverTool to show the value for each line, but using the method from a previous stackoverflow answer isn't working:
https://stackoverflow.com/a/27549243/3087409
Here's the relevant code snippet from that answer:
fig = bp.figure(tools="reset,hover")
s1 = fig.scatter(x=x,y=y1,color='#0000ff',size=10,legend='sine')
s1.select(dict(type=HoverTool)).tooltips = {"x":"$x", "y":"$y"}
s2 = fig.scatter(x=x,y=y2,color='#ff0000',size=10,legend='cosine')
fig.select(dict(type=HoverTool)).tooltips = {"x":"$x", "y":"$y"}
And here's my code:
from bokeh.models import HoverTool
from bokeh.plotting import figure
source = ColumnDataSource(data=dict(
x = [list of datetimes]
wind = [some list]
coal = [some other list]
)
)
hover = HoverTool(mode = "vline")
plot = figure(tools=[hover], toolbar_location=None,
x_axis_type='datetime')
plot.line('x', 'wind')
plot.select(dict(type=HoverTool)).tooltips = {"y":"#wind"}
plot.line('x', 'coal')
plot.select(dict(type=HoverTool)).tooltips = {"y":"#coal"}
As far as I can tell, it's equivalent to the code in the answer I linked to, but when I hover over the figure, both hover tools boxes show the same value, that of the wind.
You need to add renderers for each plot. Check this. Also do not use samey label for both values change the names.
from bokeh.models import HoverTool
from bokeh.plotting import figure
source = ColumnDataSource(data=df)
plot = figure(x_axis_type='datetime',plot_width=800, plot_height=300)
plot1 =plot.line(x='x',y= 'wind',source=source,color='blue')
plot.add_tools(HoverTool(renderers=[plot1], tooltips=[('wind',"#wind")],mode='vline'))
plot2 = plot.line(x='x',y= 'coal',source=source,color='red')
plot.add_tools(HoverTool(renderers=[plot2], tooltips=[("coal","#coal")],mode='vline'))
show(plot)
The output look like this.
Related
I'm trying to highlight last value of a time series plot by plot its value on yaxis, as shown in this question. I prefer using LabelSet over Legend because you can precisely control the text positions and also using a data source to update it. But unfortunately, I can not find out how to draw label text outside the plot box.
Here is some code to plot LabelSet and notice how the text is only shown inside the box (66.1x is partially blocked by yaxis):
import pandas as pd
from bokeh.io import output_notebook
output_notebook()
from bokeh.plotting import figure, show
from bokeh.models import LabelSet, ColumnDataSource
#import bokeh.sampledata
#bokeh.sampledata.download()
from bokeh.sampledata.stocks import MSFT
df = pd.DataFrame(MSFT)[:50]
df["date"] = pd.to_datetime(df["date"])
p = figure(
x_axis_type="datetime", width=1000, toolbar_location='left',
title = "MSFT Candlestick", y_axis_location="right")
p.line(df.date, df.close)
ds = ColumnDataSource({'x': [df.date.iloc[-1]], 'y': [df.close.iloc[-1]], 'text': [' ' + str(df.close.iloc[-1])]})
ls = LabelSet(x='x', y='y', text='text', source=ds)
p.add_layout(ls)
show(p)
Please let me know how to show LabelSet outside the box, Thanks
I'm using the Bokeh package to plot a line chart.
I want a given line to bolden (alpha to increase) when I hover over it.
I added a hover tool and then added "hover_line_alpha = 0.6" in my line chart.
However when I hover over points on a given line, the line disappears altogether!
Can you help me fix this?
Code below so you can see my logic.
Thanks,
Ross
# Code in Question
from bokeh.io import output_notebook, show, output_file
from bokeh.plotting import figure
from bokeh.models import ColumnDataSource, HoverTool
output_notebook()
# set out axes
x = 'time_rnd'
y = 'count'
# set colour palette
col_brew = ['#8dd3c7','#ffffb3','#bebada','#fb8072','#80b1d3','#fdb462','#b3de69','#fccde5','#d9d9d9','#bc80bd','#ccebc5','#ffed6f']
# map out figure
plot = figure(tools='box_select, lasso_select, save' ,x_axis_type='datetime')
# add HoverTool
hover_info = [('time', '#hover_time'),
('word', '#word'),
('count', '#count')]
hover = HoverTool(names=['use'],tooltips=hover_info,
mode='mouse',
show_arrow=True
)
plot.add_tools(hover)
### FOR LOOP OF PLOT [THIS IS WHERE THE ISSUE MANIFESTS]
for i in top_wds_test:
df_eng_word = df_eng_timeline[df_eng_timeline['word']==i]
source = ColumnDataSource(df_eng_word)
plot.line(x, y, line_width = 3,
line_alpha = 0.1, line_color=col_brew[top_wds.index(i)],
hover_line_alpha = 0.6,
#hover_line_color = 'black',
#hover_line_color = col_brew[top_wds.index(i)],
source = source, legend=i, name = 'use'
)
plot.circle(x, y, fill_color='white', size=5,
selection_color='green',
nonselection_fill_color='grey',nonselection_fill_alpha=0.4,
hover_color='red',
source = source, name = 'use')
# add legend
plot.legend.location = "top_left"
plot.legend.label_text_font_style = 'bold'
# materialize the plot
show(plot)
There seems to be an issue when the renderers share a data source. However, this works (with Bokeh >= 0.13.0) if you let Bokeh create a new separate source for each glyph:
from bokeh.models import ColumnDataSource
from bokeh.plotting import figure, show
p = figure(tools="hover", tooltips="$name: #$name")
data=dict(x=[1,2,3], y1=[2,6,5], y2=[6,2,3])
p.line('x', 'y1', color="navy", line_width=3, source=data,
alpha=0.1, hover_color="navy", hover_alpha=0.6, name="y1")
p.line('x', 'y2',color="firebrick", line_width=3, source=data,
alpha=0.1, hover_color="firebrick", hover_alpha=0.6, name="y2")
show(p)
So I'm trying to create a Bokeh plot for which I would like to be able to manually adapt the range of the X-Axis with a slider.
Being a newbie I've only managed to get this far and despite researching this subject I haven't been able to solve this problem.
Here my code:
from bokeh.layouts import column
from bokeh.models import CustomJS, ColumnDataSource, Slider
from bokeh.plotting import Figure, output_file, show
output_file("test.html")
x = [x*0.5 for x in range(0, 200)]
y = x
source = ColumnDataSource(data=dict(x=x, y=y))
plot = Figure(plot_width=600, plot_height=400, x_range=(0, 100))
plot.line('x', 'y', source=source, line_width=2, line_alpha=0.75)
callback = CustomJS(args=dict(x_range=plot.x_range), code="""
var start = cb_obj.value
x_range.set({"start": start, "end": start+10})
""")
slider = Slider (start=0, end=90, value=20, step=10)
slider.js_on_change('value', callback)
layout = column(slider, plot)
show(layout)
My biggest problem is to understand how I connect the CustomJS to my plot.
I would gladly appreciate your help.
It has been answered at the Bokeh Google group
To reiterate, the only change needed is to replace x_range.set with x_range.setv.
I am starting to use Bokeh to plot data that does not share a common x or y variable. I would like to be able to select a line and have the other, non-selected lines, grey out. Ideally the selected line would also be brought to the front of the plot.
So far I been able to get the line selected, but I can't find a way of "greying out" the non-selected lines, or setting the level of the selected line.
import numpy as np
from bokeh.plotting import figure, show, output_file
from bokeh.models.sources import ColumnDataSource
from bokeh.models import Line,TapTool
output_file("test.html")
x0s = np.random.randint(0,20,20)
y0s = np.random.randint(0,20,20)
x1s = np.random.randint(0,20,20)
y1s = np.random.randint(0,20,20)
p_left = figure(tools=[TapTool()])
for xs,ys in zip([x0s,x1s],[y0s,y1s]):
source = ColumnDataSource({'x': xs, 'y': ys})
default_line = Line(x='x', y='y', line_color='blue', line_width=2)
selected_line = Line(line_color='red', line_width=4)
nonselected_line = Line(line_color='grey')
p_left.add_glyph(source,default_line,selection_glyph=selected_line,nonselection_glyph=nonselected_line)
show(p_left)
I'm in a similar situation, and found this example:
https://docs.bokeh.org/en/latest/docs/user_guide/styling.html#selected-and-unselected-glyphs
Haven't tried it out myself, but seems to be close to what you're looking for.
EDIT Just tried it, worked flawlessly for me.
I'm new to bokeh and I just jumped right into using hovertool as that's why I wanted to use bokeh in the first place.
Now I'm plotting genes and what I want to achieve is multiple lines with the same y-coordinate and when you hover over a line you get the name and position of this gene.
I have tried to mimic this example, but for some reason the I can't even get it to show coordinates.
I'm sure that if someone who actually knows their way around bokeh looks at this code, the mistake will be apparent and I'd be very thankful if they showed it to me.
from bokeh.plotting import figure, HBox, output_file, show, VBox, ColumnDataSource
from bokeh.models import Range1d, HoverTool
from collections import OrderedDict
import random
ys = [10 for x in range(len(levelsdf2[(name, 'Start')]))]
xscale = zip(levelsdf2[('Log', 'Start')], levelsdf2[('Log', 'Stop')])
yscale = zip(ys,ys)
TOOLS="pan,wheel_zoom,box_zoom,reset,hover"
output_file("scatter.html")
hover_tips = levelsdf2.index.values
colors = ["#%06x" % random.randint(0,0xFFFFFF) for c in range(len(xscale))]
source = ColumnDataSource(
data=dict(
x=xscale,
y=yscale,
gene=hover_tips,
colors=colors,
)
)
p1 = figure(plot_width=1750, plot_height=950,y_range=[0, 15],tools=TOOLS)
p1.multi_line(xscale[1:10],yscale[1:10], alpha=1, source=source,line_width=10, line_color=colors[1:10])
hover = p1.select(dict(type=HoverTool))
hover.tooltips = [
("index", "$index"),
("(x,y)", "($x, $y)"),
]
show(p1)
the levelsdf2 is a pandas.DataFrame, if it matters.
I figured it out on my own. It turns out that version 0.8.2 of Bokeh doesn't allow hovertool for lines so I did the same thing using quads.
from bokeh.plotting import figure, HBox, output_file, show, VBox, ColumnDataSource
from bokeh.models import Range1d, HoverTool
from collections import OrderedDict
import random
xscale = zip(levelsdf2[('series1', 'Start')], levelsdf2[('series1', 'Stop')])
xscale2 = zip(levelsdf2[('series2', 'Start')], levelsdf2[('series2', 'Stop')])
yscale2 = zip([9.2 for x in range(len(levelsdf2[(name, 'Start')]))],[9.2 for x in range(len(levelsdf2[(name, 'Start')]))])
TOOLS="pan,wheel_zoom,box_zoom,reset,hover"
output_file("linesandquads.html")
hover_tips = levelsdf2.index.values
colors = ["#%06x" % random.randint(0,0xFFFFFF) for c in range(len(xscale))]
proc1 = 'Log'
proc2 = 'MazF2h'
expression1 = levelsdf2[(proc1, 'Level')]
expression2 = levelsdf2[(proc2, 'Level')]
source = ColumnDataSource(
data=dict(
start=[min(xscale[x]) for x in range(len(xscale))],
stop=[max(xscale[x]) for x in range(len(xscale))],
start2=[min(xscale2[x]) for x in range(len(xscale2))],
stop2=[max(xscale2[x]) for x in range(len(xscale2))],
gene=hover_tips,
colors=colors,
expression1=expression1,
expression2=expression2,
)
)
p1 = figure(plot_width=900, plot_height=500,y_range=[8,10.5],tools=TOOLS)
p1.quad(left="start", right="stop", top=[9.211 for x in range(len(xscale))],
bottom = [9.209 for x in range(len(xscale))], source=source, color="colors")
p1.multi_line(xscale2,yscale2, source=source, color="colors", line_width=20)
hover = p1.select(dict(type=HoverTool))
hover.tooltips = OrderedDict([
(proc1+" (start,stop, expression)", "(#start| #stop| #expression1)"),
("Gene","#gene"),
])
show(p1)
Works like a charm.
EDIT: Added a picture of the result, as requested and edited code to match the screenshot posted.
It's not the best solution as it turns out it's not all that easy to plot several series of quads on one plot. It's probably possible but as it didn't matter much in my use case I didn't investigate too vigorously.
As all genes are represented on all series at the same place I just added tooltips for all series to the quads and plotted the other series as multi_line plots on the same figure.
This means that if you hovered on the top line at 9.21 you'd get tooltips for the line at 9.2 as well, but If you hovered on the 9.2 line you wouldn't get a tooltip at all.