Related
How do I search and replace text in a file using Python 3?
Here is my code:
import os
import sys
import fileinput
print ("Text to search for:")
textToSearch = input( "> " )
print ("Text to replace it with:")
textToReplace = input( "> " )
print ("File to perform Search-Replace on:")
fileToSearch = input( "> " )
#fileToSearch = 'D:\dummy1.txt'
tempFile = open( fileToSearch, 'r+' )
for line in fileinput.input( fileToSearch ):
if textToSearch in line :
print('Match Found')
else:
print('Match Not Found!!')
tempFile.write( line.replace( textToSearch, textToReplace ) )
tempFile.close()
input( '\n\n Press Enter to exit...' )
Input file:
hi this is abcd hi this is abcd
This is dummy text file.
This is how search and replace works abcd
When I search and replace 'ram' by 'abcd' in above input file, it works as a charm. But when I do it vice-versa i.e. replacing 'abcd' by 'ram', some junk characters are left at the end.
Replacing 'abcd' by 'ram'
hi this is ram hi this is ram
This is dummy text file.
This is how search and replace works rambcd
As pointed out by michaelb958, you cannot replace in place with data of a different length because this will put the rest of the sections out of place. I disagree with the other posters suggesting you read from one file and write to another. Instead, I would read the file into memory, fix the data up, and then write it out to the same file in a separate step.
# Read in the file
with open('file.txt', 'r') as file :
filedata = file.read()
# Replace the target string
filedata = filedata.replace('abcd', 'ram')
# Write the file out again
with open('file.txt', 'w') as file:
file.write(filedata)
Unless you've got a massive file to work with which is too big to load into memory in one go, or you are concerned about potential data loss if the process is interrupted during the second step in which you write data to the file.
fileinput already supports inplace editing. It redirects stdout to the file in this case:
#!/usr/bin/env python3
import fileinput
with fileinput.FileInput(filename, inplace=True, backup='.bak') as file:
for line in file:
print(line.replace(text_to_search, replacement_text), end='')
As Jack Aidley had posted and J.F. Sebastian pointed out, this code will not work:
# Read in the file
filedata = None
with file = open('file.txt', 'r') :
filedata = file.read()
# Replace the target string
filedata.replace('ram', 'abcd')
# Write the file out again
with file = open('file.txt', 'w') :
file.write(filedata)`
But this code WILL work (I've tested it):
f = open(filein,'r')
filedata = f.read()
f.close()
newdata = filedata.replace("old data","new data")
f = open(fileout,'w')
f.write(newdata)
f.close()
Using this method, filein and fileout can be the same file, because Python 3.3 will overwrite the file upon opening for write.
You can do the replacement like this
f1 = open('file1.txt', 'r')
f2 = open('file2.txt', 'w')
for line in f1:
f2.write(line.replace('old_text', 'new_text'))
f1.close()
f2.close()
You can also use pathlib.
from pathlib2 import Path
path = Path(file_to_search)
text = path.read_text()
text = text.replace(text_to_search, replacement_text)
path.write_text(text)
(pip install python-util)
from pyutil import filereplace
filereplace("somefile.txt","abcd","ram")
Will replace all occurences of "abcd" with "ram".
The function also supports regex by specifying regex=True
from pyutil import filereplace
filereplace("somefile.txt","\\w+","ram",regex=True)
Disclaimer: I'm the author (https://github.com/MisterL2/python-util)
Open the file in read mode. Read the file in string format. Replace the text as intended. Close the file. Again open the file in write mode. Finally, write the replaced text to the same file.
try:
with open("file_name", "r+") as text_file:
texts = text_file.read()
texts = texts.replace("to_replace", "replace_string")
with open(file_name, "w") as text_file:
text_file.write(texts)
except FileNotFoundError as f:
print("Could not find the file you are trying to read.")
Late answer, but this is what I use to find and replace inside a text file:
with open("test.txt") as r:
text = r.read().replace("THIS", "THAT")
with open("test.txt", "w") as w:
w.write(text)
DEMO
With a single with block, you can search and replace your text:
with open('file.txt','r+') as f:
filedata = f.read()
filedata = filedata.replace('abc','xyz')
f.truncate(0)
f.write(filedata)
Your problem stems from reading from and writing to the same file. Rather than opening fileToSearch for writing, open an actual temporary file and then after you're done and have closed tempFile, use os.rename to move the new file over fileToSearch.
My variant, one word at a time on the entire file.
I read it into memory.
def replace_word(infile,old_word,new_word):
if not os.path.isfile(infile):
print ("Error on replace_word, not a regular file: "+infile)
sys.exit(1)
f1=open(infile,'r').read()
f2=open(infile,'w')
m=f1.replace(old_word,new_word)
f2.write(m)
Using re.subn it is possible to have more control on the substitution process, such as word splitted over two lines, case-(in)sensitive match. Further, it returns the amount of matches which can be used to avoid waste of resources if the string is not found.
import re
file = # path to file
# they can be also raw string and regex
textToSearch = r'Ha.*O' # here an example with a regex
textToReplace = 'hallo'
# read and replace
with open(file, 'r') as fd:
# sample case-insensitive find-and-replace
text, counter = re.subn(textToSearch, textToReplace, fd.read(), re.I)
# check if there is at least a match
if counter > 0:
# edit the file
with open(file, 'w') as fd:
fd.write(text)
# summary result
print(f'{counter} occurence of "{textToSearch}" were replaced with "{textToReplace}".')
Some regex:
add the re.I flag, short form of re.IGNORECASE, for a case-insensitive match
for multi-line replacement re.subn(r'\n*'.join(textToSearch), textToReplace, fd.read()), depending on the data also '\n{,1}'. Notice that for this case textToSearch must be a pure string, not a regex!
Besides the answers already mentioned, here is an explanation of why you have some random characters at the end:
You are opening the file in r+ mode, not w mode. The key difference is that w mode clears the contents of the file as soon as you open it, whereas r+ doesn't.
This means that if your file content is "123456789" and you write "www" to it, you get "www456789". It overwrites the characters with the new input, but leaves any remaining input untouched.
You can clear a section of the file contents by using truncate(<startPosition>), but you are probably best off saving the updated file content to a string first, then doing truncate(0) and writing it all at once.
Or you can use my library :D
I got the same issue. The problem is that when you load a .txt in a variable you use it like an array of string while it's an array of character.
swapString = []
with open(filepath) as f:
s = f.read()
for each in s:
swapString.append(str(each).replace('this','that'))
s = swapString
print(s)
I tried this and used readlines instead of read
with open('dummy.txt','r') as file:
list = file.readlines()
print(f'before removal {list}')
for i in list[:]:
list.remove(i)
print(f'After removal {list}')
with open('dummy.txt','w+') as f:
for i in list:
f.write(i)
you can use sed or awk or grep in python (with some restrictions). Here is a very simple example. It changes banana to bananatoothpaste in the file. You can edit and use it. ( I tested it worked...note: if you are testing under windows you should install "sed" command and set the path first)
import os
file="a.txt"
oldtext="Banana"
newtext=" BananaToothpaste"
os.system('sed -i "s/{}/{}/g" {}'.format(oldtext,newtext,file))
#print(f'sed -i "s/{oldtext}/{newtext}/g" {file}')
print('This command was applied: sed -i "s/{}/{}/g" {}'.format(oldtext,newtext,file))
if you want to see results on the file directly apply: "type" for windows/ "cat" for linux:
####FOR WINDOWS:
os.popen("type " + file).read()
####FOR LINUX:
os.popen("cat " + file).read()
I have done this:
#!/usr/bin/env python3
import fileinput
import os
Dir = input ("Source directory: ")
os.chdir(Dir)
Filelist = os.listdir()
print('File list: ',Filelist)
NomeFile = input ("Insert file name: ")
CarOr = input ("Text to search: ")
CarNew = input ("New text: ")
with fileinput.FileInput(NomeFile, inplace=True, backup='.bak') as file:
for line in file:
print(line.replace(CarOr, CarNew), end='')
file.close ()
I modified Jayram Singh's post slightly in order to replace every instance of a '!' character to a number which I wanted to increment with each instance. Thought it might be helpful to someone who wanted to modify a character that occurred more than once per line and wanted to iterate. Hope that helps someone. PS- I'm very new at coding so apologies if my post is inappropriate in any way, but this worked for me.
f1 = open('file1.txt', 'r')
f2 = open('file2.txt', 'w')
n = 1
# if word=='!'replace w/ [n] & increment n; else append same word to
# file2
for line in f1:
for word in line:
if word == '!':
f2.write(word.replace('!', f'[{n}]'))
n += 1
else:
f2.write(word)
f1.close()
f2.close()
def word_replace(filename,old,new):
c=0
with open(filename,'r+',encoding ='utf-8') as f:
a=f.read()
b=a.split()
for i in range(0,len(b)):
if b[i]==old:
c=c+1
old=old.center(len(old)+2)
new=new.center(len(new)+2)
d=a.replace(old,new,c)
f.truncate(0)
f.seek(0)
f.write(d)
print('All words have been replaced!!!')
I have worked this out as an exercise of a course: open file, find and replace string and write to a new file.
class Letter:
def __init__(self):
with open("./Input/Names/invited_names.txt", "r") as file:
# read the list of names
list_names = [line.rstrip() for line in file]
with open("./Input/Letters/starting_letter.docx", "r") as f:
# read letter
file_source = f.read()
for name in list_names:
with open(f"./Output/ReadyToSend/LetterTo{name}.docx", "w") as f:
# replace [name] with name of the list in the file
replace_string = file_source.replace('[name]', name)
# write to a new file
f.write(replace_string)
brief = Letter()
Like so:
def find_and_replace(file, word, replacement):
with open(file, 'r+') as f:
text = f.read()
f.write(text.replace(word, replacement))
def findReplace(find, replace):
import os
src = os.path.join(os.getcwd(), os.pardir)
for path, dirs, files in os.walk(os.path.abspath(src)):
for name in files:
if name.endswith('.py'):
filepath = os.path.join(path, name)
with open(filepath) as f:
s = f.read()
s = s.replace(find, replace)
with open(filepath, "w") as f:
f.write(s)
How do I search and replace text in a file using Python 3?
Here is my code:
import os
import sys
import fileinput
print ("Text to search for:")
textToSearch = input( "> " )
print ("Text to replace it with:")
textToReplace = input( "> " )
print ("File to perform Search-Replace on:")
fileToSearch = input( "> " )
#fileToSearch = 'D:\dummy1.txt'
tempFile = open( fileToSearch, 'r+' )
for line in fileinput.input( fileToSearch ):
if textToSearch in line :
print('Match Found')
else:
print('Match Not Found!!')
tempFile.write( line.replace( textToSearch, textToReplace ) )
tempFile.close()
input( '\n\n Press Enter to exit...' )
Input file:
hi this is abcd hi this is abcd
This is dummy text file.
This is how search and replace works abcd
When I search and replace 'ram' by 'abcd' in above input file, it works as a charm. But when I do it vice-versa i.e. replacing 'abcd' by 'ram', some junk characters are left at the end.
Replacing 'abcd' by 'ram'
hi this is ram hi this is ram
This is dummy text file.
This is how search and replace works rambcd
As pointed out by michaelb958, you cannot replace in place with data of a different length because this will put the rest of the sections out of place. I disagree with the other posters suggesting you read from one file and write to another. Instead, I would read the file into memory, fix the data up, and then write it out to the same file in a separate step.
# Read in the file
with open('file.txt', 'r') as file :
filedata = file.read()
# Replace the target string
filedata = filedata.replace('abcd', 'ram')
# Write the file out again
with open('file.txt', 'w') as file:
file.write(filedata)
Unless you've got a massive file to work with which is too big to load into memory in one go, or you are concerned about potential data loss if the process is interrupted during the second step in which you write data to the file.
fileinput already supports inplace editing. It redirects stdout to the file in this case:
#!/usr/bin/env python3
import fileinput
with fileinput.FileInput(filename, inplace=True, backup='.bak') as file:
for line in file:
print(line.replace(text_to_search, replacement_text), end='')
As Jack Aidley had posted and J.F. Sebastian pointed out, this code will not work:
# Read in the file
filedata = None
with file = open('file.txt', 'r') :
filedata = file.read()
# Replace the target string
filedata.replace('ram', 'abcd')
# Write the file out again
with file = open('file.txt', 'w') :
file.write(filedata)`
But this code WILL work (I've tested it):
f = open(filein,'r')
filedata = f.read()
f.close()
newdata = filedata.replace("old data","new data")
f = open(fileout,'w')
f.write(newdata)
f.close()
Using this method, filein and fileout can be the same file, because Python 3.3 will overwrite the file upon opening for write.
You can do the replacement like this
f1 = open('file1.txt', 'r')
f2 = open('file2.txt', 'w')
for line in f1:
f2.write(line.replace('old_text', 'new_text'))
f1.close()
f2.close()
You can also use pathlib.
from pathlib2 import Path
path = Path(file_to_search)
text = path.read_text()
text = text.replace(text_to_search, replacement_text)
path.write_text(text)
(pip install python-util)
from pyutil import filereplace
filereplace("somefile.txt","abcd","ram")
Will replace all occurences of "abcd" with "ram".
The function also supports regex by specifying regex=True
from pyutil import filereplace
filereplace("somefile.txt","\\w+","ram",regex=True)
Disclaimer: I'm the author (https://github.com/MisterL2/python-util)
Open the file in read mode. Read the file in string format. Replace the text as intended. Close the file. Again open the file in write mode. Finally, write the replaced text to the same file.
try:
with open("file_name", "r+") as text_file:
texts = text_file.read()
texts = texts.replace("to_replace", "replace_string")
with open(file_name, "w") as text_file:
text_file.write(texts)
except FileNotFoundError as f:
print("Could not find the file you are trying to read.")
Late answer, but this is what I use to find and replace inside a text file:
with open("test.txt") as r:
text = r.read().replace("THIS", "THAT")
with open("test.txt", "w") as w:
w.write(text)
DEMO
With a single with block, you can search and replace your text:
with open('file.txt','r+') as f:
filedata = f.read()
filedata = filedata.replace('abc','xyz')
f.truncate(0)
f.write(filedata)
Your problem stems from reading from and writing to the same file. Rather than opening fileToSearch for writing, open an actual temporary file and then after you're done and have closed tempFile, use os.rename to move the new file over fileToSearch.
My variant, one word at a time on the entire file.
I read it into memory.
def replace_word(infile,old_word,new_word):
if not os.path.isfile(infile):
print ("Error on replace_word, not a regular file: "+infile)
sys.exit(1)
f1=open(infile,'r').read()
f2=open(infile,'w')
m=f1.replace(old_word,new_word)
f2.write(m)
Using re.subn it is possible to have more control on the substitution process, such as word splitted over two lines, case-(in)sensitive match. Further, it returns the amount of matches which can be used to avoid waste of resources if the string is not found.
import re
file = # path to file
# they can be also raw string and regex
textToSearch = r'Ha.*O' # here an example with a regex
textToReplace = 'hallo'
# read and replace
with open(file, 'r') as fd:
# sample case-insensitive find-and-replace
text, counter = re.subn(textToSearch, textToReplace, fd.read(), re.I)
# check if there is at least a match
if counter > 0:
# edit the file
with open(file, 'w') as fd:
fd.write(text)
# summary result
print(f'{counter} occurence of "{textToSearch}" were replaced with "{textToReplace}".')
Some regex:
add the re.I flag, short form of re.IGNORECASE, for a case-insensitive match
for multi-line replacement re.subn(r'\n*'.join(textToSearch), textToReplace, fd.read()), depending on the data also '\n{,1}'. Notice that for this case textToSearch must be a pure string, not a regex!
Besides the answers already mentioned, here is an explanation of why you have some random characters at the end:
You are opening the file in r+ mode, not w mode. The key difference is that w mode clears the contents of the file as soon as you open it, whereas r+ doesn't.
This means that if your file content is "123456789" and you write "www" to it, you get "www456789". It overwrites the characters with the new input, but leaves any remaining input untouched.
You can clear a section of the file contents by using truncate(<startPosition>), but you are probably best off saving the updated file content to a string first, then doing truncate(0) and writing it all at once.
Or you can use my library :D
I got the same issue. The problem is that when you load a .txt in a variable you use it like an array of string while it's an array of character.
swapString = []
with open(filepath) as f:
s = f.read()
for each in s:
swapString.append(str(each).replace('this','that'))
s = swapString
print(s)
I tried this and used readlines instead of read
with open('dummy.txt','r') as file:
list = file.readlines()
print(f'before removal {list}')
for i in list[:]:
list.remove(i)
print(f'After removal {list}')
with open('dummy.txt','w+') as f:
for i in list:
f.write(i)
you can use sed or awk or grep in python (with some restrictions). Here is a very simple example. It changes banana to bananatoothpaste in the file. You can edit and use it. ( I tested it worked...note: if you are testing under windows you should install "sed" command and set the path first)
import os
file="a.txt"
oldtext="Banana"
newtext=" BananaToothpaste"
os.system('sed -i "s/{}/{}/g" {}'.format(oldtext,newtext,file))
#print(f'sed -i "s/{oldtext}/{newtext}/g" {file}')
print('This command was applied: sed -i "s/{}/{}/g" {}'.format(oldtext,newtext,file))
if you want to see results on the file directly apply: "type" for windows/ "cat" for linux:
####FOR WINDOWS:
os.popen("type " + file).read()
####FOR LINUX:
os.popen("cat " + file).read()
I have done this:
#!/usr/bin/env python3
import fileinput
import os
Dir = input ("Source directory: ")
os.chdir(Dir)
Filelist = os.listdir()
print('File list: ',Filelist)
NomeFile = input ("Insert file name: ")
CarOr = input ("Text to search: ")
CarNew = input ("New text: ")
with fileinput.FileInput(NomeFile, inplace=True, backup='.bak') as file:
for line in file:
print(line.replace(CarOr, CarNew), end='')
file.close ()
I modified Jayram Singh's post slightly in order to replace every instance of a '!' character to a number which I wanted to increment with each instance. Thought it might be helpful to someone who wanted to modify a character that occurred more than once per line and wanted to iterate. Hope that helps someone. PS- I'm very new at coding so apologies if my post is inappropriate in any way, but this worked for me.
f1 = open('file1.txt', 'r')
f2 = open('file2.txt', 'w')
n = 1
# if word=='!'replace w/ [n] & increment n; else append same word to
# file2
for line in f1:
for word in line:
if word == '!':
f2.write(word.replace('!', f'[{n}]'))
n += 1
else:
f2.write(word)
f1.close()
f2.close()
def word_replace(filename,old,new):
c=0
with open(filename,'r+',encoding ='utf-8') as f:
a=f.read()
b=a.split()
for i in range(0,len(b)):
if b[i]==old:
c=c+1
old=old.center(len(old)+2)
new=new.center(len(new)+2)
d=a.replace(old,new,c)
f.truncate(0)
f.seek(0)
f.write(d)
print('All words have been replaced!!!')
I have worked this out as an exercise of a course: open file, find and replace string and write to a new file.
class Letter:
def __init__(self):
with open("./Input/Names/invited_names.txt", "r") as file:
# read the list of names
list_names = [line.rstrip() for line in file]
with open("./Input/Letters/starting_letter.docx", "r") as f:
# read letter
file_source = f.read()
for name in list_names:
with open(f"./Output/ReadyToSend/LetterTo{name}.docx", "w") as f:
# replace [name] with name of the list in the file
replace_string = file_source.replace('[name]', name)
# write to a new file
f.write(replace_string)
brief = Letter()
Like so:
def find_and_replace(file, word, replacement):
with open(file, 'r+') as f:
text = f.read()
f.write(text.replace(word, replacement))
def findReplace(find, replace):
import os
src = os.path.join(os.getcwd(), os.pardir)
for path, dirs, files in os.walk(os.path.abspath(src)):
for name in files:
if name.endswith('.py'):
filepath = os.path.join(path, name)
with open(filepath) as f:
s = f.read()
s = s.replace(find, replace)
with open(filepath, "w") as f:
f.write(s)
How do I search and replace text in a file using Python 3?
Here is my code:
import os
import sys
import fileinput
print ("Text to search for:")
textToSearch = input( "> " )
print ("Text to replace it with:")
textToReplace = input( "> " )
print ("File to perform Search-Replace on:")
fileToSearch = input( "> " )
#fileToSearch = 'D:\dummy1.txt'
tempFile = open( fileToSearch, 'r+' )
for line in fileinput.input( fileToSearch ):
if textToSearch in line :
print('Match Found')
else:
print('Match Not Found!!')
tempFile.write( line.replace( textToSearch, textToReplace ) )
tempFile.close()
input( '\n\n Press Enter to exit...' )
Input file:
hi this is abcd hi this is abcd
This is dummy text file.
This is how search and replace works abcd
When I search and replace 'ram' by 'abcd' in above input file, it works as a charm. But when I do it vice-versa i.e. replacing 'abcd' by 'ram', some junk characters are left at the end.
Replacing 'abcd' by 'ram'
hi this is ram hi this is ram
This is dummy text file.
This is how search and replace works rambcd
As pointed out by michaelb958, you cannot replace in place with data of a different length because this will put the rest of the sections out of place. I disagree with the other posters suggesting you read from one file and write to another. Instead, I would read the file into memory, fix the data up, and then write it out to the same file in a separate step.
# Read in the file
with open('file.txt', 'r') as file :
filedata = file.read()
# Replace the target string
filedata = filedata.replace('abcd', 'ram')
# Write the file out again
with open('file.txt', 'w') as file:
file.write(filedata)
Unless you've got a massive file to work with which is too big to load into memory in one go, or you are concerned about potential data loss if the process is interrupted during the second step in which you write data to the file.
fileinput already supports inplace editing. It redirects stdout to the file in this case:
#!/usr/bin/env python3
import fileinput
with fileinput.FileInput(filename, inplace=True, backup='.bak') as file:
for line in file:
print(line.replace(text_to_search, replacement_text), end='')
As Jack Aidley had posted and J.F. Sebastian pointed out, this code will not work:
# Read in the file
filedata = None
with file = open('file.txt', 'r') :
filedata = file.read()
# Replace the target string
filedata.replace('ram', 'abcd')
# Write the file out again
with file = open('file.txt', 'w') :
file.write(filedata)`
But this code WILL work (I've tested it):
f = open(filein,'r')
filedata = f.read()
f.close()
newdata = filedata.replace("old data","new data")
f = open(fileout,'w')
f.write(newdata)
f.close()
Using this method, filein and fileout can be the same file, because Python 3.3 will overwrite the file upon opening for write.
You can do the replacement like this
f1 = open('file1.txt', 'r')
f2 = open('file2.txt', 'w')
for line in f1:
f2.write(line.replace('old_text', 'new_text'))
f1.close()
f2.close()
You can also use pathlib.
from pathlib2 import Path
path = Path(file_to_search)
text = path.read_text()
text = text.replace(text_to_search, replacement_text)
path.write_text(text)
(pip install python-util)
from pyutil import filereplace
filereplace("somefile.txt","abcd","ram")
Will replace all occurences of "abcd" with "ram".
The function also supports regex by specifying regex=True
from pyutil import filereplace
filereplace("somefile.txt","\\w+","ram",regex=True)
Disclaimer: I'm the author (https://github.com/MisterL2/python-util)
Open the file in read mode. Read the file in string format. Replace the text as intended. Close the file. Again open the file in write mode. Finally, write the replaced text to the same file.
try:
with open("file_name", "r+") as text_file:
texts = text_file.read()
texts = texts.replace("to_replace", "replace_string")
with open(file_name, "w") as text_file:
text_file.write(texts)
except FileNotFoundError as f:
print("Could not find the file you are trying to read.")
Late answer, but this is what I use to find and replace inside a text file:
with open("test.txt") as r:
text = r.read().replace("THIS", "THAT")
with open("test.txt", "w") as w:
w.write(text)
DEMO
With a single with block, you can search and replace your text:
with open('file.txt','r+') as f:
filedata = f.read()
filedata = filedata.replace('abc','xyz')
f.truncate(0)
f.write(filedata)
Your problem stems from reading from and writing to the same file. Rather than opening fileToSearch for writing, open an actual temporary file and then after you're done and have closed tempFile, use os.rename to move the new file over fileToSearch.
My variant, one word at a time on the entire file.
I read it into memory.
def replace_word(infile,old_word,new_word):
if not os.path.isfile(infile):
print ("Error on replace_word, not a regular file: "+infile)
sys.exit(1)
f1=open(infile,'r').read()
f2=open(infile,'w')
m=f1.replace(old_word,new_word)
f2.write(m)
Using re.subn it is possible to have more control on the substitution process, such as word splitted over two lines, case-(in)sensitive match. Further, it returns the amount of matches which can be used to avoid waste of resources if the string is not found.
import re
file = # path to file
# they can be also raw string and regex
textToSearch = r'Ha.*O' # here an example with a regex
textToReplace = 'hallo'
# read and replace
with open(file, 'r') as fd:
# sample case-insensitive find-and-replace
text, counter = re.subn(textToSearch, textToReplace, fd.read(), re.I)
# check if there is at least a match
if counter > 0:
# edit the file
with open(file, 'w') as fd:
fd.write(text)
# summary result
print(f'{counter} occurence of "{textToSearch}" were replaced with "{textToReplace}".')
Some regex:
add the re.I flag, short form of re.IGNORECASE, for a case-insensitive match
for multi-line replacement re.subn(r'\n*'.join(textToSearch), textToReplace, fd.read()), depending on the data also '\n{,1}'. Notice that for this case textToSearch must be a pure string, not a regex!
Besides the answers already mentioned, here is an explanation of why you have some random characters at the end:
You are opening the file in r+ mode, not w mode. The key difference is that w mode clears the contents of the file as soon as you open it, whereas r+ doesn't.
This means that if your file content is "123456789" and you write "www" to it, you get "www456789". It overwrites the characters with the new input, but leaves any remaining input untouched.
You can clear a section of the file contents by using truncate(<startPosition>), but you are probably best off saving the updated file content to a string first, then doing truncate(0) and writing it all at once.
Or you can use my library :D
I got the same issue. The problem is that when you load a .txt in a variable you use it like an array of string while it's an array of character.
swapString = []
with open(filepath) as f:
s = f.read()
for each in s:
swapString.append(str(each).replace('this','that'))
s = swapString
print(s)
I tried this and used readlines instead of read
with open('dummy.txt','r') as file:
list = file.readlines()
print(f'before removal {list}')
for i in list[:]:
list.remove(i)
print(f'After removal {list}')
with open('dummy.txt','w+') as f:
for i in list:
f.write(i)
you can use sed or awk or grep in python (with some restrictions). Here is a very simple example. It changes banana to bananatoothpaste in the file. You can edit and use it. ( I tested it worked...note: if you are testing under windows you should install "sed" command and set the path first)
import os
file="a.txt"
oldtext="Banana"
newtext=" BananaToothpaste"
os.system('sed -i "s/{}/{}/g" {}'.format(oldtext,newtext,file))
#print(f'sed -i "s/{oldtext}/{newtext}/g" {file}')
print('This command was applied: sed -i "s/{}/{}/g" {}'.format(oldtext,newtext,file))
if you want to see results on the file directly apply: "type" for windows/ "cat" for linux:
####FOR WINDOWS:
os.popen("type " + file).read()
####FOR LINUX:
os.popen("cat " + file).read()
I have done this:
#!/usr/bin/env python3
import fileinput
import os
Dir = input ("Source directory: ")
os.chdir(Dir)
Filelist = os.listdir()
print('File list: ',Filelist)
NomeFile = input ("Insert file name: ")
CarOr = input ("Text to search: ")
CarNew = input ("New text: ")
with fileinput.FileInput(NomeFile, inplace=True, backup='.bak') as file:
for line in file:
print(line.replace(CarOr, CarNew), end='')
file.close ()
I modified Jayram Singh's post slightly in order to replace every instance of a '!' character to a number which I wanted to increment with each instance. Thought it might be helpful to someone who wanted to modify a character that occurred more than once per line and wanted to iterate. Hope that helps someone. PS- I'm very new at coding so apologies if my post is inappropriate in any way, but this worked for me.
f1 = open('file1.txt', 'r')
f2 = open('file2.txt', 'w')
n = 1
# if word=='!'replace w/ [n] & increment n; else append same word to
# file2
for line in f1:
for word in line:
if word == '!':
f2.write(word.replace('!', f'[{n}]'))
n += 1
else:
f2.write(word)
f1.close()
f2.close()
def word_replace(filename,old,new):
c=0
with open(filename,'r+',encoding ='utf-8') as f:
a=f.read()
b=a.split()
for i in range(0,len(b)):
if b[i]==old:
c=c+1
old=old.center(len(old)+2)
new=new.center(len(new)+2)
d=a.replace(old,new,c)
f.truncate(0)
f.seek(0)
f.write(d)
print('All words have been replaced!!!')
I have worked this out as an exercise of a course: open file, find and replace string and write to a new file.
class Letter:
def __init__(self):
with open("./Input/Names/invited_names.txt", "r") as file:
# read the list of names
list_names = [line.rstrip() for line in file]
with open("./Input/Letters/starting_letter.docx", "r") as f:
# read letter
file_source = f.read()
for name in list_names:
with open(f"./Output/ReadyToSend/LetterTo{name}.docx", "w") as f:
# replace [name] with name of the list in the file
replace_string = file_source.replace('[name]', name)
# write to a new file
f.write(replace_string)
brief = Letter()
Like so:
def find_and_replace(file, word, replacement):
with open(file, 'r+') as f:
text = f.read()
f.write(text.replace(word, replacement))
def findReplace(find, replace):
import os
src = os.path.join(os.getcwd(), os.pardir)
for path, dirs, files in os.walk(os.path.abspath(src)):
for name in files:
if name.endswith('.py'):
filepath = os.path.join(path, name)
with open(filepath) as f:
s = f.read()
s = s.replace(find, replace)
with open(filepath, "w") as f:
f.write(s)
Here below is my code about how to edit text file.
Since python can't just edit a line and save it at the same time,
I save the previous text file's content into a list first then write it out.
For example,if there are two text files called sample1.txt and sample2.txt in the same folder.
Sample1.txt
A for apple.
Second line.
Third line.
Sample2.txt
First line.
An apple a day.
Third line.
Execute python
import glob
import os
#search all text files which are in the same folder with python script
path = os.path.dirname(os.path.abspath(__file__))
txtlist = glob.glob(path + '\*.txt')
for file in txtlist:
fp1 = open(file, 'r+')
strings = [] #create a list to store the content
for line in fp1:
if 'apple' in line:
strings.append('banana\n') #change the content and store into list
else:
strings.append(line) #store the contents did not be changed
fp2 = open (file, 'w+') # rewrite the original text files
for line in strings:
fp2.write(line)
fp1.close()
fp2.close()
Sample1.txt
banana
Second line.
Third line.
Sample2.txt
First line.
banana
Third line.
That's how I edit specific line for text file.
My question is : Is there any method can do the same thing?
Like using the other functions or using the other data type rather than list.
Thank you everyone.
Simplify it to this:
with open(fname) as f:
content = f.readlines()
content = ['banana' if line.find('apple') != -1 else line for line in content]
and then write value of content to file back.
Instead of putting all the lines in a list and writing it, you can read it into memory, replace, and write it using same file.
def replace_word(filename):
with open(filename, 'r') as file:
data = file.read()
data = data.replace('word1', 'word2')
with open(filename, 'w') as file:
file.write(data)
Then you can loop through all of your files and apply this function
The built-in fileinput module makes this quite simple:
import fileinput
import glob
with fileinput.input(files=glob.glob('*.txt'), inplace=True) as files:
for line in files:
if 'apple' in line:
print('banana')
else:
print(line, end='')
fileinput redirects print into the active file.
import glob
import os
def replace_line(file_path, replace_table: dict) -> None:
list_lines = []
need_rewrite = False
with open(file_path, 'r') as f:
for line in f:
flag_rewrite = False
for key, new_val in replace_table.items():
if key in line:
list_lines.append(new_val+'\n')
flag_rewrite = True
need_rewrite = True
break # only replace first find the words.
if not flag_rewrite:
list_lines.append(line)
if not need_rewrite:
return
with open(file_path, 'w') as f:
[f.write(line) for line in list_lines]
if __name__ == '__main__':
work_dir = os.path.dirname(os.path.abspath(__file__))
txt_list = glob.glob(work_dir + '/*.txt')
replace_dict = dict(apple='banana', orange='grape')
for txt_path in txt_list:
replace_line(txt_path, replace_dict)
I have a text file like this:-
V1xx AB1
V2xx AC34
V3xx AB1
Can we add ; at each end of line through python script?
V1xx AB1;
V2xx AC34;
V3xx AB1;
Here's what you can try. I have overwritten the same file though.
You can try creating a new one(I leave it to you) - You'll need to modify your with statement a little : -
lines = ""
with open('D:\File.txt') as file:
for line in file:
lines += line.strip() + ";\n"
file = open('D:\File.txt', "w+")
file.writelines(lines)
file.flush()
UPDATE: - For in-place modification of file, you can use fileinput module: -
import fileinput
for line in fileinput.input('D:\File.txt', inplace = True):
print line.strip() + ";"
input_file_name = 'input.txt'
output_file_name = 'output.txt'
with open(input_file_name, 'rt') as input, open(output_file_name, 'wt') as output:
for line in input:
output.write(line[:-1]+';\n')
#Open the original file, and create a blank file in write mode
File = open("D:\myfilepath\myfile.txt")
FileCopy = open("D:\myfilepath\myfile_Copy.txt","w")
#For each line in the file, remove the end line character,
#insert a semicolon, and then add a new end line character.
#copy these lines into the blank file
for line in File:
CleanLine=line.strip("\n")
FileCopy.write(CleanLine+";\n")
FileCopy.close()
File.close()
#Replace the original file with the copied file
File = open("D:\myfilepath\myfile.txt","w")
FileCopy = open("D:\myfilepath\myfile_Copy.txt")
for line in FileCopy:
File.write(line)
FileCopy.close()
File.close()
Notes: I have left the "copy file" in there as a back up. You can manually delete it or use os.remove() (if you do that don't forget to import the os module)