I try to open mails on gmail.
I have the following code but it actually reads the mail on the console.
I would like gmail detects the mail has been opened, because when I run the script on the console, the mail is not really opened. It is still in bold in my gmail.
import imaplib, email
user = 'xxx#gmail.com'
password = 'xxx'
imap_url = 'imap.gmail.com'
def get_body(msg):
if msg.is_multipart():
return get_body(msg.get_payload(0))
else:
return msg.get_payload(None,True)
con = imaplib.IMAP4_SSL(imap_url)
con.login(user,password)
con.select('INBOX')
result, data = con.fetch(b'3','(RFC822)')
raw = email.message_from_bytes(data[0][1])
print(get_body(raw))
if I mark message as seen, the message will look like I have read it but gmail or the sender of the message know I won't have read it
This is similar to the problem here Python, IMAP and GMail. Mark messages as SEEN
Give this a try
result.store(data[0].replace(' ',','),'+FLAGS','\Seen')
Thank you for you answer, this is not really the same because if I mark message as seen, the message will look like I have read it but gmail or the sender of the message know I won't have read it
Related
The recipient address and the distro lists do not immediately resolve. Outlook is smart enough to recognize the email addresses, but it doesn't recognize my distro list. At least not immediately.
I'm using Office 365 if that matters.
from win32com.client import Dispatch
outlook = Dispatch('Outlook.Application')
Mail_Item = outlook.CreateItem(0)
# This sends no problem
# Mail_Item.To = 'first.last#company.com'
# This does not send
Mail_Item.To = 'Contact_Group_Test'
Mail_Item.Subject = "Subject_text"
Mail_Item.Body = "Body_text"
Mail_Item.Recipients.ResolveAll()
Mail_Item.Send()
While troubleshooting I used Mail_Item.Display() to see the message. After a few seconds it resolves all my addresses, including the contact group. HOWEVER, the contact group itself still doesn't work despite this.
If you couldn't solve, you can try smtplib.
import smtplib
sender = 'from#fromdomain.com'
receivers = ['to#todomain.com']
message = """From: From Person <from#fromdomain.com>
To: To Person <to#todomain.com>
Subject: SMTP e-mail test
This is a test e-mail message.
"""
try:
smtpObj = smtplib.SMTP('localhost')
smtpObj.sendmail(sender, receivers, message)
print "Successfully sent email"
except SMTPException:
print "Error: unable to send email"
If you will send mail from outlook account, you have to write smtp-mail.outlook.com instead of localhost
mtbenj's answer may work for others. I'm just choosing to go the win32com route because of my organization.
For whatever reason using 'Test', and I'm assuming, any one-word contact list takes ~5 seconds to resolve. I counted after the .Display() popup came up. Naming it 'Test_' didn't do it for me either.
I decided to try one named 'Test_Test'. After calling .Recipients.ResolveAll(), it works perfect.
So use an underscore and multiple words.
I am working on script to send emails.
Emails are supposed to be send from a shared mailbox in outlook.
This shared mailbox doesn't have a password and here is the trick: on the one hand I need the authenticate and provide a password, on the other hand I have no password to provide.
I ran the scripted with my professional outlook mailbox (email address + password) and it works.
Here is my config:
MY_ADDRESS = "---emailaddressofthesender---"
PASSWORD = ""
MESSAGE = "some message"
# set up the SMTP server
s = smtplib.SMTP(host='smtp-mail.outlook.com', port=587)
s.starttls()
s.login(MY_ADDRESS, PASSWORD)
msg = MIMEMultipart() # create a message
# setup the parameters of the message
msg['From']=MY_ADDRESS
msg['To']="---emailaddresseofthereceiver---"
msg['Subject']="This is TEST"
# add in the message body
msg.attach(MIMEText(MESSAGE, 'plain'))
# send the message via the server set up earlier.
s.send_message(msg)
del msg
# Terminate the SMTP session and close the connection
s.quit()
I tried:
Read the doc smtplib. Unless mistaken, I found no mentions about
authentications without password.
PASSWORD = "": authentication error
PASSWORD = None: authentication error
s.login(MY_ADDRESS): PASSWORD argument is missing
remove s.login() method from the script: Client was not authenticated to send anonymous mail during MAIL FROM [PR0P264CA0184.FRAP264.PROD.OUTLOOK.COM]
The only working solution I have now is to send from my mailbox credentials and not from the shared mailbox. For the sake of this project, this solution is not acceptable.
Many thanks in advance for your help
Add this right before the s.send() step and it will work.
s.SentOnBehalfOfName = 'SharedFolder'
I am trying to send messages to my phone using the SMTP protocol. If I log into my Google Account (for which I've enabled less secure apps) I'm able to send a message to '5551234567#tmomail.net'. The subject and body of the email arrive on my phone as a text message.
However, when I try to do the same with Python's smtplib library, I don't get a message. Here's the code I'm using:
import smtplib
# Establish a secure session with gmail's outgoing SMTP server using your gmail account
server = smtplib.SMTP("smtp.gmail.com", 587)
server.starttls()
# the account that will send the emails
server.login('me#gmail.com', 'password')
# sendmail(from, to, msg)
server.sendmail('me#gmail.com', '5551234567#tmomail.net', 'hey there!')
Does anyone know what I can do to get the text message to come through from the smtplib? Any suggestions are very welcome!
Try to check the link below.
If seems like you for forgot
server.ehlo()
How to send an email with Gmail as provider using Python?
Please let us know if you see python message in SENT emails folder of Gmail Inbox.
If yes, try to find a differences between one you sent from browser and one you sent from python API.
I'm making a script that notifies people about some pending tickets in JIRA. These notifications are sent by e-mail, I already got the notification to trigger, but I'm having problems sending the emails.
I can send them using gmail but when I tried to do it with my official account (the one that the company gave me) I am not able to send them. IT guys already provided me the 'localhost' because they use SMTP relays and the port, but they keep telling me that I should start SMTP without authentication, I'm not very sure of how to do this.
The example I found on internet was this:
import smtplib
fromaddr = 'Axel.Sa#mydomain.com'
toaddrs = ['Axel.Sa#mydomain.com']
msg = '''
From: {fromaddr}
To: {toaddr}
Subject: testin'
This is a test
.
'''
msg = msg.format(fromaddr=fromaddr, toaddr=toaddrs[0])
server = smtplib.SMTP('localhost:25')
server.starttls()
server.ehlo("mydomain.com")
server.mail(fromaddr)
server.rcpt(toaddrs[0])
server.data(msg)
server.quit()
But I keep getting this error, If someone can tell me the proper way of sending emails by SMTP without authentication I will be very grateful.
Check this stack:
How to send an email without login to server in Python
change your smtplib.SMTP('localhost:25') to smtplib.SMTP('localhost', 25)
I'm trying really hard to check why this is happening but not really sure if its on gmail's server side or in a part of the script I'm using.
The problem is that I'm trying to send an email to a mailing list (I have found many posts explaining how to include various emails but none explaining if there is a limitation or workaround to send it to a single email which contains multiple addresses).
In this case I want to send the email to many different people which make part of the BI team of our company (bi#company.com), normally sending an email to this address will result in everyone from the team getting the email, but I can't manage to make i work, and I don't want to include all emails in the list because there are too much and it will have to be manually changed every time.
When I try this with another single person email it works perfectly
import smtplib
sender = 'server#company.com'
receivers = ['bi#company.com']
q = ""
message = """From: Error alert <Server-company>
To: BI <bi#company.com>
Subject: Error e-mail
%s
""" % q
try:
smtpObj = smtplib.SMTP('localhost')
smtpObj.sendmail(sender, receivers, message)
print "Successfully sent email"
except SMTPException:
print "Error: unable to send email"
Alright. I found out why this was not working in my organization. Hopefully this can help someone else out. The outlook groups were setup to only work from an internal email address.
Sending emails programmatically, may use a relay method, which has no authentication. As such the email will never go through. The fix is to have the Network ops people (or exchange group) at your company turn on receiving external emails. The emails will then go through.
make recivers a list of emails you want to send:
example:
recivers = ['a#gmail.com','b#gmail.com,...]
try like this:
import smtplib
from email.mime.text import MIMEText
sender = 'server#company.com'
receivers = ['a#company.com','b]#company.com'....]
server = smtplib.SMTP('smtp#serv.com',port)
server.starttls()
msg = MIMEText('your_message')
msg['Subject'] = "subject line"
msg['From'] = sender
msg['To'] = ", ".join(receivers)
server.login('username','password')
server.sendmail(sender, recipients, msg.as_string())
server.quit()
I finally decided to stick to writing the full list of email addresses inside the list. Apparently if mailing lists are managed locally the re distribution of the emails cant be done.