I am running Python tornado web application from terminal by typing the command python app.py when I close the terminal, the app stops. Is there anyway I can still run the app on a port such that closing terminal wouldn't affect it? Because I don't want to keep the terminal open.
Try nohup. In your case, it should be sufficient to run:
nohup python app.py &
Take note of the number shown as result of this command; it is the pid of the process, and it is used to terminate the process itself, simply by killing it. Suppose that 3456 is the pid of the process, so this command will terminate your application:
kill -9 3456
In case you lose the pid, it can be retrieved using this command:
ps -A | grep app.py
where app.py is the Python script file (the same used in the initial nohup command).
Anyway, for further information you can take a look here.
Related
I've coded a stock trading bot in Python3. I have it hosted on a server (Ubuntu 18.10) that I use iTerm to SSH into. Wondering how to keep the script actively running so that when I exit out of my session it won't kill the active process.
Basically, I want to SSH into my server, start the script then close out and come back into it when the days over to stop the process.
You could use nohup and add & at the end of your command to safely exit you session without killing original process. For example if your script name is script.py:
nohup python3 script.py &
Normally, when running a command using & and exiting the shell afterwards, the shell will terminate the sub-command with the hangup signal (kill -SIGHUP <pid>). This can be prevented using nohup, as it catches the signal and ignores it so that it never reaches the actual application.
You can use screen
sudo apt-get install screen
screen
./run-my-script
Ctrl-A then D to get out of your screen
From there you will be able to close out your ssh terminal. Come back later and run
screen -ls
screen -r $screen_running
The screen running is usually the first 5 digits you see after you've listed all the screens. You can see if you're script is still running or if you've added logging you can see where in the process you are.
Using tmux is a good option. Alternatively you could run the command with an & at the end which lets it run in the background.
https://tmuxcheatsheet.com/
I came here for finding nohup python3 script.py &
Right solution for this thread is screen OR tmux. :)
I created a Daemon process with these liblinktosite
I connect trough ssh and start the process with python myDaemon.py start.
I use a loop within the daemon method to do my tasks. But as soon as I logout the daemon stops(dies).
Does this happen because I save the PID file on my user and not in the root folder?
Anyone a idea. I can deliver code but now on Thread creation.(+3h)
Use the shebang line in your python script. Make it executable using the command.
chmod +x test.py
Use no hangup to run a program in background even if you close your terminal.
nohup /path/to/test.py &
Do not forget to use & to put it in background.
To see the process again, use in terminal,
ps ax | grep test.py
Answer
Another way would be actually make it an upstart script
I have a Raspberry Pi running Raspbian controlling a home automation system as part of a project for college. To control this I'm using an ASP.NET web app to fire SSH commands at the Pi to start various Python apps. I need a way to terminate another app over SSH before starting a new one.
For example:
a.py and b.py are running
User selects c.py from the web app
a.py must be stopped before starting c.py leaving b.py and c.py running.
Thanks
Jake
If you want to kill every running instance of python:
$ kill `pidof python`
If you want to kill every running instance of a specific python script:
$ kill `pidof -x myscript.py`
or
$ pkill myscript.py
or
$ killall glances
It's generally not advisable to send SIGKILL to a running program (kill -9). SIGTERM is usually sufficient unless the program is frozen. All the above commands send SIGTERM.
find the PID (Process ID) of your python script using the command (should be the second column)
ps -ef | grep python
kill <PID found previously>
kill -9 <PID found previously>
If the program is still running then it means you are using the wrong PID
Nothing can stop a kill -9 command :-)
i need to keep run my Python Program in Background on my Raspberry Pi after i close the ssh connection, Because i need to save Phidget information on a SQL DB
I try to do this with nohup but it seems that the python Program isn't even executed.
Because when I look into the MySql DB , after doing below there nothing inserted.
I type in :
pi#raspi ~/MyProjekt $ sudo nohup python sensorReader.py &
[1] 8580
and when i try to look if this process exist whit :
ps -A| grep 8580
it returns nothing.
So do i something wrong ?
How can i run the python program after close SSH Conneciton
I would recommend running your python program in a cron reboot job.
To edit your root cronjobs use
sudo crontab -e
And add the line
#reboot sudo python full_path/MyProjekt/sensorReader.py
Then reboot your pi with:
sudo reboot
And then confirm that your process is running:
ps -aux | grep python
I don't think this is an ssh connection issue, from what you say the program seems to execute and exit. Does your .py execute in an infinite loop? Else you shouldn't expect it to stay alive.
Then, about keeping a process alive after the parent has terminated (the shell in your case), nohup is the answer, that means ignore HUP signals (those sent by a terminating parent process).
The '&' just means 'execute in background'.
The cron solution is good if your program is meant to do something periodically, but if it should stay alive waiting for some event (like listening to a socket), I would prefer to create an init scritp, so that the program is run as a demon at boot time and only in the desired runlevels.
I would like to run an asynchronous program on a remote linux server indefinitely. This script doesn't output anything to the server itself(other than occasionally writing information to a mysql database). So far the only option I have been able to find is the nohup command:
nohup script_name &
From what I understand, nohup allows the command to run even after I log out of my SSH session while the '&' character lets the command run in the background. My question is simple: is this the best way to do what I would like? I am only trying to run a single script for long periods of time while occasionally stopping it to make updates.
Also, if nohup is indeed the best option, what is the proper way to terminate the script when I need to? There seems to be some disagreement over what is the best way to kill a nohup process.
Thanks
What you are basically asking is "How do I create a daemon process?" What you want to do is "daemonize", there are many examples of this floating around on the web. The process is basically that you fork(), the child creates a new session, the parent exits, the child duplicates and then closes open file handles to the controlling terminal (STDIN, STDOUT, STDERR).
There is a package available that will do all of this for you called python-daemon.
To perform graceful shutdowns, look at the signal library for creating a signal handler.
Also, searching the web for "python daemon" will bring up many reimplementations of the common C daemonizing process: http://code.activestate.com/recipes/66012/
If you can modify the script, then you can catch SIGHUP signals and avoid the need for nohup. In a bash script you would write:
trap " echo ignoring hup; " SIGHUP
You can employ the same technique to terminate the program: catch, say, a SIGUSR1 signal in a handler, set a flag and then gracefully exit from your main loop. This way you can send this signal of your choice to stop your program in a predictable way.
There are some situations when you want to execute/start some scripts on a remote machine/server (which will terminate automatically) and disconnect from the server.
eg: A script running on a box which when executed 1) takes a model and copies it to a custer (remote server) 2) creates a script for running a simulation with the wodel and push it to server 3) starts the script on the server and disconnect 4) The duty of the script thus started is to run the simulation in the server and once completed (will take days to complete) copy the results back to client.
I would use the following command:
ssh remoteserver 'nohup /path/to/script `</dev/null` >nohup.out 2>&1 &'
eg:
echo '#!/bin/bash
rm -rf statuslist
mkdir statuslist
chmod u+x ~/monitor/concat.sh
chmod u+x ~/monitor/script.sh
nohup ./monitor/concat.sh &
' > script.sh
chmod u+x script.sh
rsync -azvp script.sh remotehost:/tmp
ssh remoteshot '/tmp/script.sh `</dev/null` >nohup.out 2>&1 &'
Hope this helps ;-)
That is the simplest way to do it if you want to (or have to) avoid changing the script itself. If the script is always to be run like this, you can write a mini script containing the line you just typed and run that instead. (or use an alias, if appropriate)
To answer you second question:
$ nohup ./test &
[3] 11789
$ Sending output to nohup.out
$jobs
[1]- Running emacs *h &
[3]+ Running nohup ./test &
$ kill %3
$ jobs
[1]- Running emacs *h &
[3]+ Exit 143 nohup ./test
Ctrl+c works too, (sends a SIGINT) as does kill (sends a SIGTERM)