On command prompt I typed
python -m HTTPServer
and I got
Serving HTTP on 0.0.0.0 port 8000
But when I try to access the localhost page it just won't open.
I also tried
http://127.0.0.1:8000/
but still, nothing opens up.
output:
Also, my pc have anaconda installed and I think that it may be hindering with 8000 port. I don't want to uninstall anaconda. How can I use this port or another new port as I m trying to learn D3?
Using python3, run the following command in the directory of your web assets:
python -m http.server 8000
This should be equivalent to using SimpleHTTPServer in python2.
Related
I am trying to run the python .py file in PyScript. To do that, I need to load python file in a server because PyScript cannot access local file:
<py-script src="./greet.py"></py-script>
So I tried to create local server by entering this command in the terminal in the folder of my project:
python -m http.server
It has been over 30 minutes now and the server is not on. It shows that the terminal local is still running. It should take no more than a minute to be done. I have tried to locate specific port with:
python -m http.server 80 but it still doesn't work.
What should I do?
You might try also binding the server to a specific link-local IP address, using something like python -m http.server --bind 127.0.0.1 8000. The page should then appear at 127.0.0.1:8000.
This was necessary for me on Windows - even after allowing Python permissions to access the network. Not sure if it's Windows-related, or Python not identifying the correct NIC to bind to, or what.
I am trying to create a local server by following the instructions here
I ran the command and got this:
➜ ~ python -m SimpleHTTPServer 8000
Serving HTTP on 0.0.0.0 port 8000 ...
However I don't know how to access the files in the directory that I started the server in. How can I do this? Thanks
you can type localhost:8000 or 127.0.0.1:8000 in your browser.. the important bit being an address, localhost followed by the port 8000 in this case.
I am trying to run a simple HTTPServer in LAN. PC-A(192.168.2.10) and PC-B(192.168.2.12) are in same LAN.
I want to access HTTPServer running in PC-A from PC-B using a firefox web browser.
In PC-A(192.168.2.10) I ran,
$ python -m SimpleHTTPServer $ Serving HTTP on 0.0.0.0 port 8000
From PC-A I(192.168.2.10) can access HTTPServer using firefoxx web browser
with,
1. http://192.168.2.10:8000 <-- WORKS
2. http://127.0.0.1:8000 <-- WORKS
But from PC-B (192.168.2.12) if I try to connect with
1. http://192.168.2.10:8000 <-- Does NOT WORK ??
Is it possible to connect to PC-A's HTTPserver from PC-B from above steps? OR are some other settings will be needed ?
AFAIK, you should enable HTTP port in your router via virtual server or port forwarding depending on the kind of the router.
It seems to be an network issue in my LAN. Issue solved after I Switched to another PC-C and ran
$ python -m SimpleHTTPServer
$ Serving HTTP on 0.0.0.0 port 8000
I was able to connect to PC-C's HTTPserver from PC-B. Issue was solved although not sure what was the real cause.
I am working on a Python Flask application in Ubuntu under VirtualBox, run from OSX. Now I want to connect my python application from OSX (the host OS). I am using a NAT networking, and already read about Port Forwarding (which I think it's very easy). But, somehow if I test my application using Google Chrome, try to open http://localhost:8888 (my server in Ubuntu listen to port 8888), chrome return with Server return no response (or kinda)
I have issue the following command in OSX terminal : `VBoxManage modifyvm "Ubuntu 12.0.4 LTS" --natpf1 "fikrposdc,tcp,,8888,,8888". And my python application already listening to port 8888, :
* Running on http://127.0.0.1:8888
I've read that in Ubuntu, by default there is no firewall. So, I try to netstat, but issuing `netstat | grep LISTEN didn't gave any output...
Is there something that I missed?
`
Wooops!
Having read related question, I found this question with the exact same problem. And I modify my code to run the application :
app.run(host="0.0.0.0", port=8888)
Now I can continue my work!
Thanks
After cding to my folder I enter
python -m SimpleHTTPServer
and get
Serving HTTP on 0.0.0.0 port 8000 ...
in reply. But when I hit http://0.0.0.0:8000/test.html I get a page not found error.
I've also tried
pushd /path/you/want/to/serve; python -m SimpleHTTPServer; popd
taken from this question
When I hit ls I can see the file and the directory. Anyone know what I'm doing wrong?
I think the other two answers are trying to make it clear that 0.0.0.0 is not the URL you should be visiting. When a Python web server (like cherrypy for instance) says it is serving on 0.0.0.0 it means it is listening for all TCP traffic that ends up at that machine no matter the hostname or IP that was requested. But, if you change it such that the socket listens on 127.0.0.1 or 'localhost', then unless the request was specifically to that IP/hostname, it won't respond to the request. For example, many times you can use your machine name instead of localhost (ubuntu allows this for example). If your machine name is 'brian' and you have a server listening on 0.0.0.0:8080, you should be able to reach that server with http://brian:8080. But if that server is listening on 'localhost', even though 'brian' is set to point to 'localhost', the server won't receive the message.
You also need to be sure the file really is in the directory you are running the command from. Otherwise, the 404 response is actually correct :)
Good luck!
Have you tried http://127.0.0.1:8000/ ?
:)
You must type in the ip-address of the computer your connecting to for example 192.168.0.2:8000 Change that to the ip-address of your server.
Try browsing to http://localhost:8000/test.html or http://127.0.0.1:8000/test.html (those two should be exactly the same thing as long as your hosts file isn't all crazy-like).
0.0.0.0 is usually used by Windows as the "Not connected" IP, and can also be used as a sort of wildcard for when dealing with IPs. I am a bit confused at why your HTTP server is trying to host on 0.0.0.0, though. You may need to edit some config files and set that to 'localhost' or '127.0.0.1'.
Try to host over localhost may it help you instead of trying it on http://0.0.0.0/ like this way: python -m http.server 8000 --bind 127.0.0.1
create a directory e.g. mkdir HTTPServer_dir
move inside the folder cd HTTPServer_dir
typing the command (according to python version) python -m SimpleHTTPSever 8000
(or the port you want)
go on a browser and type http://127.0.0.1:8000/
Done !!!
You could make a simple index.html page inside the HTTPServer_dir so you can see an html page instead of directory listing
Run ifconfig on Linux or ipconfig on Windows to find the ip address of the server.
$ sudo ifconfig
wlan0 Link encap:Ethernet HWaddr 30:3a:64:b3:be:6a
inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0
Here in case the url would be:
http://192.168.1.103:8000/test.html
try this in python3
python -m http.server 8000 --bind 127.0.0.1
and in your browser this url:
http://127.0.0.1:8000/
Sometimes the same port number is used by some other service. So we can try with some other port like
python -m SimpleHTTPServer 9090
And then simply hit http://{your system IP}:9090/
this works for me.
this worked for me,replacing your machine name with
http://localhost:x000
This worked for me on Windows 8. Did not download any software!
In cmd:
Go to the directory that your file is in.
python -m SimpleHTTPServer
Shows "Serving HTTP on 0.0.0.0 port 8000 ..."
Now, find out your system name. For Windows 8: Control Panel -> System. You will see the computer name here. Let's say it is "Abhinav".
Your local server will be hosted at "Abhinav.local:8000".