I am trying to follow this tutorial https://towardsdatascience.com/a-beginners-guide-to-building-your-own-face-recognition-system-to-creep-out-your-friends-df3f4c471d55. I was able to run the pip3 install cmake but not pip3 install face_recognition or pip3 install dlib. When executing those commands, i receive the following:
error message
I already have Visual Studio Code 2020 with Python, C/C++ and Cmake extensions installed.
My python version is 3.8.5.
I got it to work! Thanks for helping gulbaz khan. But I still don’t know what bug it is but this is what I did to make it work:
I had to install dlib manually into my desktop. There are a handful of repositories in github to find this. From my command prompt, i accessed the directory which containts the dlib .whl file and ran that. Afterwards, i pip install face_recognition and everything has been installed!
I'm trying to convert my Python file to APK file on virtual machine(Ubuntu OS) but at first I have to install Kivy library on Ubuntu. In the Udemy video that I watch, I must only do 1 thing:
bash kivy-buildozer-installer.sh
When I run this, everything goes well until here:
After that I got more than 100 lines of errors. This is a part of them:
I tried also
pip install kivy
pip3 install kivy
sudo pip install kivy
and they got the same error with bash kivy-buildozer-installer.sh.
I don't know what to do else.
Kivy wheel is not yet available for python 3.8
This issue is mentioned in github issues
You can still install it using
pip install kivy[base] kivy_examples --pre --extra-index-url https://kivy.org/downloads/simple/
I had a lot of problems too when I tried to install it your way but sudo apt install python3-kivy worked for me. I advise you to try that.
I'm trying to install some packages with pip.
But pip install unroll gives me
Command "python setup.py egg_info" failed with error code 1 in
C:\Users\MARKAN~1\AppData\Local\Temp\pip-build-wa7uco0k\unroll\
How can I solve this?
About the error code
According to the Python documentation:
This module makes available standard errno system symbols. The value of each symbol is the corresponding integer value. The names and descriptions are borrowed from linux/include/errno.h, which should be pretty all-inclusive.
Error code 1 is defined in errno.h and means Operation not permitted.
About your error
Your setuptools do not appear to be installed. Just follow the Installation Instructions from the PyPI website.
If it's already installed, try
pip install --upgrade setuptools
If it's already up to date, check that the module ez_setup is not missing. If it is, then
pip install ez_setup
Then try again
pip install unroll
If it's still not working, maybe pip didn't install/upgrade setup_tools properly so you might want to try
easy_install -U setuptools
And again
pip install unroll
Here's a little guide explaining a little bit how I usually install new packages on Python + Windows. It seems you're using Windows paths, so this answer will stick to that particular SO:
I never use a system-wide Python installation. I only use virtualenvs, and usually I try to have the latest version of 2.x & 3.x.
My first attempt is always doing pip install package_i_want in some of my Visual Studio command prompts. What Visual Studio command prompt? Well, ideally the Visual Studio which matches the one which was used to build Python. For instance, let's say your Python installation says Python 2.7.11 (v2.7.11:6d1b6a68f775, Dec 5 2015, 20:40:30) [MSC v.1500 64 bit (AMD64)] on win32. The version of Visual Studio used to compile Python can be found here, so v1500 means I'd be using vs2008 x64 command prompt
If the previous step failed for some reason I just try using easy_install package_i_want
If the previous step failed for some reason I go to gohlke website and I check whether my package is available over there. If it's so, I'm lucky, I just download it into my virtualenv and then I just go to that location using a command prompt and I do pip install package_i_want.whl
If the previous step didn't succeed I'll just try to build the wheel myself and once it's generated I'll try to install it with pip install package_i_want.whl
Now, if we focus in your specific problem, where you're having a hard time installing the unroll package. It seems the fastest way to install it is doing something like this:
git clone https://github.com/Zulko/unroll
cd unroll && python setup.py bdist_wheel
Copy the generated unroll-0.1.0-py2-none-any.whl file from the created dist folder into your virtualenv.
pip install unroll-0.1.0-py2-none-any.whl
That way it will install without any problems. To check it really works, just login into the Python installation and try import unroll, it shouldn't complain.
One last note: This method works almost 99% of the time, and sometimes you'll find some pip packages which are specific to Unix or Mac OS X, in that case, when that happens I'm afraid the best way to get a Windows version is either posting some issues to the main developers or having some fun by yourself porting to Windows (typically a few hours if you're not lucky) :)
It was resolved after upgrading pip:
python -m pip install --upgrade pip
pip install "package-name"
I got stuck exactly with the same error with psycopg2. It looks like I skipped a few steps while installing Python and related packages.
sudo apt-get install python-dev libpq-dev
Go to your virtual env
pip install psycopg2
(In your case you need to replace psycopg2 with the package you have an issue with.)
It worked seamlessly.
I got this same error while installing mitmproxy using pip3. The below command fixed this:
pip3 install --upgrade setuptools
Download and install the Microsoft Visual C++ Compiler for Python 2.7 from https://www.microsoft.com/en-in/download/details.aspx?id=44266 - this package contains the compiler and set of system headers necessary for producing binary wheels for Python 2.7 packages.
Open a command prompt in elevated mode (run as administrator)
Firstly do pip install ez_setup
Then do pip install unroll (It will start installing numpy, music21, decorator, imageio, tqdm, moviepy, unroll) # Please be patient for music21 installation
Python 2.7.11 64 bit used
Other way:
sudo apt-get install python-psycopg2 python-mysqldb
I had the same issue when installing the "Twisted" library and solved it by running the following command on Ubuntu 16.04 (Xenial Xerus):
sudo apt-get install python-setuptools python-dev build-essential
It's a dependency issue.
I tried running the following commands helped me sorting out the dependencies, in my case the dependency was
grpcio
pip3 install --upgrade pip
python3 -m pip install --upgrade setuptools
pip3 install --no-cache-dir --force-reinstall -Iv grpcio==1.36.1
pip3 install pulsar-client==2.7.0
remember you must have python3 installed in your system.
First try:
pip install unroll
For sure not work :)
Then Try:
pip2 install unroll
Still get error Try:
pip3 install unroll
If pip3 Worked then suggest to change configuration to use pip3 as pip because you will get a lot of issues as the modern now is Python3 = pip3 if you execute a script files.
I had the same problem.
The problem was:
pyparsing 2.2 was already installed and my requirements.txt was trying to install pyparsing 2.0.1 which throw this error
Context: I was using virtualenv, and it seems the 2.2 came from my global OS Python site-packages, but even with --no-site-packages flag (now by default in last virtualenv) the 2.2 was still present. Surely because I installed Python from their website and it added Python libraries to my $PATH.
Maybe a pip install --ignore-installed would have worked.
Solution: as I needed to move forwards, I just removed the pyparsing==2.0.1 from my requirements.txt.
I ran into the same error code when trying to install a Python module with pip.
#Hackndo noted that the documentation indicate a security issue.
Based on that answer, my problem was solved by running the pip install command with sudo prefixed:
sudo pip install python-mpd2
For me this worked
python3 -m pip3 install -U pip
you can also try
python -m pip install -U pip
pip3 install --upgrade setuptools
WARNING: pip is being invoked by an old script wrapper. This will fail in a future version of pip.
Please see https://github.com/pypa/pip/issues/5599 for advice on fixing the underlying issue.
To avoid this problem you can invoke Python with -m pip instead of running pip directly.
Use python3 -m pip "command", eg:
python3 -m pip install --user pyqt5
I tried all of the above with no success. I then updated my Python version from 2.7.10 to 2.7.13, and it resolved the problems that I was experiencing.
That means some packages in pip are old or not correctly installed.
Try checking version and then upgrading pip.Use auto remove if that works.
If the pip command shows an error all the time for any command or it freezes, etc.
The best solution is to uninstall it or remove it completely.
Install a fresh pip and then update and upgrade your system.
I have given a solution to installing pip fresh here - python: can't open file get-pip.py error 2] no such file or directory
next installation helps me:
pip3 install cython
This worked for me:
sudo xcodebuild -license
Upgrading Python to version 3 fixed my problem. Nothing else did.
I downloaded the .whl file from http://www.lfd.uci.edu/~gohlke/pythonlibs/ and then did:
pip install scipy-0.19.1-cp27-cp27m-win32.whl
Note that the version you need to use (win32/win_amd-64) depends on the version of Python and not that of Windows.
I had this problem using virtualenvs (with pipenv) on my new development setup.
I could only solve it by upgrading the psycopg2 version from 2.6.2 to 2.7.3.
More information is at https://github.com/psycopg/psycopg2/issues/594
I faced the same problem with the same error message but on Ubuntu 16.04 LTS (Xenial Xerus) instead:
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-w71uo1rg/poster/
I tested all the solutions provided above and none of them worked for me. I read the full TraceBack and found out I had to create the virtual environment with Python version 2.7 instead (the default one uses Python 3.5 instead):
virtualenv --python=/usr/bin/python2.7 my_venv
Once I activated it, I run pip install unirest successfully.
try on linux:
sudo apt install python-pip python-bluez libbluetooth-dev libboost-python-dev libboost-thread-dev libglib2.0-dev bluez bluez-hcidump
Had the same problem on my Win10 PC with different packages and tried everything mentioned so far.
Finally solved it by disabling Comodo Auto-Containment.
Since nobody has mentioned it yet, I hope it helps someone.
I had the same problem and was able to fix by doing the following.
Windows Python needs Visual C++ libraries installed via the SDK to build code, such as via setuptools.extension.Extension or numpy.distutils.core.Extension. For example, building f2py modules in Windows with Python requires Visual C++ SDK as installed above. On Linux and Mac, the C++ libraries are installed with the compiler.
https://www.scivision.co/python-windows-visual-c++-14-required/
Following below command worked for me
[root#sandbox ~]# pip install google-api-python-client==1.6.4
Methods to solve setup.pu egg_info issue when updating setuptools or not other methods doesnot works.
If CONDA version of the library is available to install use conda instead of pip.
Clone the library repo and then try installation by pip install -e . or by python setup.py install
upgrading python's version did the work for me.
I have just encountered the same problem when trying to pip install -e . a new repo. I did not notice that the contents of setup.py haven't been saved properly and I was effectively running the command with an empty setup.py.
Hence you may experience the same error message if the setup.py of the target package is either empty or malformed.
I solved it on Centos 7 by using:
sudo yum install libcurl-devel
I was following the instructions here and I'm having trouble getting the installation to work. Basically, the first part works fine. I downloaded portaudio, followed the instructions, and it all seemed to work.
However, when I triedpython3 setup.py install, I got an error. The error came from the /src/_portaudiomodule.c file, and it said that "The file Python.h could not be found". I don't really understand what's going on because there was no Python.h file when I extracted the PyAudio archive. I don't know where the Python.h file was supposed to come from.
I'm kind of a noob to unix systems so I could have easily made a mistake somewhere. I've been trying to solve this for hours and I've had no luck so far. Thanks in advance for your help!
To install the latest version of pyaudio using conda:
source activate -your environment name-
pip install pyaudio
You may run into the following error when installing from pip:
src/_portaudiomodule.c:29:23: fatal error: portaudio.h: No such file or directory
#include "portaudio.h"
compilation terminated.
error: command 'gcc' failed with exit status 1
That is because you don't have the PortAudio development package installed. Install it with:
sudo apt-get install portaudio19-dev
You don't need to compile pyaudio. To install PyAudio, run:
$ sudo add-apt-repository universe
$ sudo apt-get install python-pyaudio python3-pyaudio
The first command enables Universe Ubuntu repository.
If you want to compile it e.g., to use the latest version from git; install build dependencies:
$ sudo apt-get build-dep python-pyaudio python3-pyaudio
After that, you could install it from sources using pip:
$ python3 -mpip install pyaudio
Or to install the current version from git:
$ pip install -e git+http://people.csail.mit.edu/hubert/git/pyaudio.git#egg=pyaudio
Run pip commands inside a virtualenv or add --user command-line option, to avoid modifying the global python3 installation (leave it to the package manager).
I've tested it on Ubuntu. Let me know if it fails on Mint.
I have found the work arround for mac.
please refer the below steps to install pyaudio on python 3.5
Follow these steps :
export HOMEBREW_NO_ENV_FILTERING=1
xcode-select --install
brew update
brew upgrade
brew install portaudio
pip install pyaudio
I was able to get it install with anaconda, using this package.
Follow install instructions for linux here, then do:
conda install -c bokeh pyaudio=0.2.7
try to install using the the below command
pip install pyaudio
after that install the required Microsoft Visual C++ 14.0
refer the below image for the same.
and restart the system and run the same command again
pip install pyaudio
Python.h is nothing but a header file. It is used by gcc to build applications. You need to install a package called python-dev. This package includes header files, a static library and development tools for building Python modules, extending the Python interpreter or embedding Python in applications. To install this package, enter:
sudo apt-get install python3-dev
I am running Python 2.7.2 on my machine. I am trying to install numpy with easy_install and pip, but none of them are able to do so. So, when I try:
sudo easy_install-2.7 numpy
I get this error:
"The package setup script has attempted to modify files on your system
that are not within the EasyInstall build area, and has been aborted.
This package cannot be safely installed by EasyInstall, and may not
support alternate installation locations even if you run its setup
script by hand. Please inform the package's author and the EasyInstall
maintainers to find out if a fix or workaround is available."
Moreover, when I try with pip:
sudo pip-2.7 install numpy
I get this error:
RuntimeError: Broken toolchain: cannot link a simple C program
Is there any fix available for this?
I was facing the same error while installing the requirements for my django project. This worked for me.
Upgrade your setuptools version via pip install --upgrade setuptools and run the command for installing the packages again.
you need a compiler and development tools, along with header files for Python.
you didn't mention your OS.
on my system (Ubuntu), I can install python-dev and the toolchain dependencies with:
$ sudo apt-get install python-dev
then I can pip install numpy.