Develop Reference

In python, How can i add a $ symbol just before { in the api endpoint

I need to add a $ symbol before the { on each line. how can I do it in python,
Problem: Using python I am reading all the API endpoint from the JSON file before I pass those API endpoints, I need to append a $ symbol just before to the open parenthesis {
Below is the code reads the API endpoint name from JSON file and prints.
import json
with open("example.json", "r") as reads: # Reading all the API endpoints from json file.
data = json.load(reads)
print(data['paths'].items())
for parameters, values in data['paths'].items():
print(parameters)
From the above code, I need to go further to achieve adding a $ symbol next to { before printing it.
Below list i get by reading the json file using python:
/API/{id}/one
/{two}/one/three
/three/four/{five}
Expected is:
/API/${id}/one
/${two}/one/three
/three/four/${five}

You could use .replace().
>>> obj="""
... /API/{id}/one
... /{two}/one/three
... /three/four/{five}
... """
>>> newobj = obj.replace('{','${')
>>> print(newobj)
/API/${id}/one
/${two}/one/three
/three/four/${five}

You Can use re library.
for parameters, values in data['paths'].items():
print(re.sub('{', '${', parameters))
For more info on re, Go through the doc. https://docs.python.org/3/library/re.html, It's a very helpful module.

Encodings in ConfigParser (Python)

Python 3.1.3
What I need is to read dictionary from cp1251-file using ConfigParser.
My example:
config = configparser.ConfigParser()
config.optionxform = str
config.read("file.cfg")
DataStrings = config.items("DATA")
DataBase = dict()
for Dstr in DataStrings:
str1 = Dstr[0]
str2 = Dstr[1]
DataBase[str1] = str2
After that I'm trying to replace some words in some UTF-8 files according dictionary. But sometimes it doesn't works (for example, with symbols of "new line-carriage return").
My file in UTF-8 and configuration file (dictionary) in CP1251. Seems like trouble, I have to decode config into UTF-8.
I've tryed this:
str1 = Dstr[0].encode('cp1251').decode('utf-8-sig')
But error "'utf8' codec can't decode byte 0xcf in position 0" appeared.
If I use .decode('','ignore') - I just lose almost all config file.
What should I do?

Python 3.1 is in the no-mans-land of Python versions. Ideally you'd upgrade to Python 3.5, which would let you do config.read("file.cfg", encoding="cp1251")
If you must stay on 3.1x, you can use the ConfigParser.readfp() method to read from a previously opened file using the correct encoding:
import configparser
config = configparser.ConfigParser()
config.optionxform = str
config_file = open("file.cfg", encoding="cp1251")
config.readfp(config_file)

Python Json Config 'Extended Interpolation'

I am currently using the Python library configparser:
from configparser import ConfigParser, ExtendedInterpolation
I find the ExtendedInterpolation very useful because it avoids the risk of having to reenter constants in multiple places.
I now have a requirement to use a Json document as the basis of the configuration as it provides more structure.
import json
from collections import OrderedDict
def get_json_config(file):
"""Load Json into OrderedDict from file"""
with open(file) as json_data:
d = json.load(json_data, object_pairs_hook=OrderedDict)
return d
Does anyone have any suggestions as to the best way to implement configparser style ExtendedInterpolation?
For example if a node in the Json contains the value ${home_dir}/lumberjack this would copy root node home_dir and take value 'lumberjack'?

Try to use string.Template. But I'm not sure whether it's your need. There is one package can do this may be. Bellow is what i should do.
config.json
{
"home_dir": "/home/joey",
"class_path": "/user/local/bin",
"dir_one": "${home_dir}/dir_one",
"dir_two": "${home_dir}/dir_two",
"sep_path_list": [
"${class_path}/python",
"${class_path}/ruby",
"${class_path}/php"
]
}
python code:
import json
from string import Template
with open("config.json", "r") as config_file:
config_content = config_file.read()
config_template = Template(config_content)
mid_json = json.loads(config_content)
config = config_template.safe_substitute(mid_json)
print config
This can substitute the defined key in json file.

Came in very useful; however, I found "config" is a unicode string; I resolved with:
# proper code
return json.loads(config)

Python argparser. List of dict in INI

I have a following list in my python module:
couples = [("somekey1", "somevalue1"), ("somekey2", "somevalue2"), ("somekey3", "somevalue3"),....]
I am storing configurations for my app in "configs.ini" and i use configparser tor read it.
I checked documentation for configparser and didn't find how can i read my list from file.
UPD:
Does anybody know how i can read following list from my configs or maybe exists another way to store it in file ?
UPD2: it is list of logins and password.May it can help.

I'm not sure I understand this correctly but if you want to create a config file to easily read a list like you've shown then create a section in your configs.ini
[section]
key = value
key2 = value2
key3 = value3
and then
>> config = ConfigParser.RawConfigParser()
>> config.read('configs.ini')
>> items = config.items('section')
>> items
[('key', 'value'), ('key2', 'value2'), ('key3', 'value3')]
which is basically what you say you need.
If on the other hand what you are saying is that your config file contains:
[section]
couples = [("somekey1", "somevalue1"), ("somekey2", "somevalue2"), ("somekey3", "somevalue3")]
what you could do is extend the config parser like for example so:
class MyConfigParser(ConfigParser.RawConfigParser):
def get_list_of_tups(self, section, option):
value = self.get(section, option)
import re
couples = re.finditer('\("([a-z0-9]*)", "([a-z0-9]*)"\)', value)
return [(c.group(1), c.group(2)) for c in couples]
and then your new parser can get fetch your list for you:
>> my_config = MyConfigParser()
>> my_config.read('example.cfg')
>> couples = my_config.get_list_of_tups('section', 'couples')
>> couples
[('somekey1', 'somevalue1'), ('somekey2', 'somevalue2'), ('somekey3', 'somevalue3')]
The second situation is just making things hard for yourself I think.

You can use the pickle module to dump and load your list to a file.
To dump your list:
import pickle
couples = [("somekey1", "somevalue1"), ("somekey2", "somevalue2"), ("somekey3", "somevalue3"),....]
pickle.dump(couples, open("save.p", "wb"))
To load your list:
couples = pickle.load(open("save.p", "rb"))

What you're looking for is probably the configparser module. Check out these links for more details:
1) How to read and write INI file with Python3?
2) http://docs.python.org/2.7/library/configparser.html#examples

Properties file in python (similar to Java Properties)

Given the following format (.properties or .ini):
propertyName1=propertyValue1
propertyName2=propertyValue2
...
propertyNameN=propertyValueN
For Java there is the Properties class that offers functionality to parse / interact with the above format.
Is there something similar in python's standard library (2.x) ?
If not, what other alternatives do I have ?

I was able to get this to work with ConfigParser, no one showed any examples on how to do this, so here is a simple python reader of a property file and example of the property file. Note that the extension is still .properties, but I had to add a section header similar to what you see in .ini files... a bit of a bastardization, but it works.
The python file: PythonPropertyReader.py
#!/usr/bin/python
import ConfigParser
config = ConfigParser.RawConfigParser()
config.read('ConfigFile.properties')
print config.get('DatabaseSection', 'database.dbname');
The property file: ConfigFile.properties
[DatabaseSection]
database.dbname=unitTest
database.user=root
database.password=
For more functionality, read: https://docs.python.org/2/library/configparser.html

For .ini files there is the configparser module that provides a format compatible with .ini files.
Anyway there's nothing available for parsing complete .properties files, when I have to do that I simply use jython (I'm talking about scripting).

I know that this is a very old question, but I need it just now and I decided to implement my own solution, a pure python solution, that covers most uses cases (not all):
def load_properties(filepath, sep='=', comment_char='#'):
"""
Read the file passed as parameter as a properties file.
"""
props = {}
with open(filepath, "rt") as f:
for line in f:
l = line.strip()
if l and not l.startswith(comment_char):
key_value = l.split(sep)
key = key_value[0].strip()
value = sep.join(key_value[1:]).strip().strip('"')
props[key] = value
return props
You can change the sep to ':' to parse files with format:
key : value
The code parses correctly lines like:
url = "http://my-host.com"
name = Paul = Pablo
# This comment line will be ignored
You'll get a dict with:
{"url": "http://my-host.com", "name": "Paul = Pablo" }

A java properties file is often valid python code as well. You could rename your myconfig.properties file to myconfig.py. Then just import your file, like this
import myconfig
and access the properties directly
print myconfig.propertyName1

if you don't have multi line properties and a very simple need, a few lines of code can solve it for you:
File t.properties:
a=b
c=d
e=f
Python code:
with open("t.properties") as f:
l = [line.split("=") for line in f.readlines()]
d = {key.strip(): value.strip() for key, value in l}

If you have an option of file formats I suggest using .ini and Python's ConfigParser as mentioned. If you need compatibility with Java .properties files I have written a library for it called jprops. We were using pyjavaproperties, but after encountering various limitations I ended up implementing my own. It has full support for the .properties format, including unicode support and better support for escape sequences. Jprops can also parse any file-like object while pyjavaproperties only works with real files on disk.

This is not exactly properties but Python does have a nice library for parsing configuration files. Also see this recipe: A python replacement for java.util.Properties.

i have used this, this library is very useful
from pyjavaproperties import Properties
p = Properties()
p.load(open('test.properties'))
p.list()
print(p)
print(p.items())
print(p['name3'])
p['name3'] = 'changed = value'

Here is link to my project: https://sourceforge.net/projects/pyproperties/. It is a library with methods for working with *.properties files for Python 3.x.
But it is not based on java.util.Properties

This is a one-to-one replacement of java.util.Propeties
From the doc:
def __parse(self, lines):
""" Parse a list of lines and create
an internal property dictionary """
# Every line in the file must consist of either a comment
# or a key-value pair. A key-value pair is a line consisting
# of a key which is a combination of non-white space characters
# The separator character between key-value pairs is a '=',
# ':' or a whitespace character not including the newline.
# If the '=' or ':' characters are found, in the line, even
# keys containing whitespace chars are allowed.
# A line with only a key according to the rules above is also
# fine. In such case, the value is considered as the empty string.
# In order to include characters '=' or ':' in a key or value,
# they have to be properly escaped using the backslash character.
# Some examples of valid key-value pairs:
#
# key value
# key=value
# key:value
# key value1,value2,value3
# key value1,value2,value3 \
# value4, value5
# key
# This key= this value
# key = value1 value2 value3
# Any line that starts with a '#' is considerered a comment
# and skipped. Also any trailing or preceding whitespaces
# are removed from the key/value.
# This is a line parser. It parses the
# contents like by line.

You can use a file-like object in ConfigParser.RawConfigParser.readfp defined here -> https://docs.python.org/2/library/configparser.html#ConfigParser.RawConfigParser.readfp
Define a class that overrides readline that adds a section name before the actual contents of your properties file.
I've packaged it into the class that returns a dict of all the properties defined.
import ConfigParser
class PropertiesReader(object):
def __init__(self, properties_file_name):
self.name = properties_file_name
self.main_section = 'main'
# Add dummy section on top
self.lines = [ '[%s]\n' % self.main_section ]
with open(properties_file_name) as f:
self.lines.extend(f.readlines())
# This makes sure that iterator in readfp stops
self.lines.append('')
def readline(self):
return self.lines.pop(0)
def read_properties(self):
config = ConfigParser.RawConfigParser()
# Without next line the property names will be lowercased
config.optionxform = str
config.readfp(self)
return dict(config.items(self.main_section))
if __name__ == '__main__':
print PropertiesReader('/path/to/file.properties').read_properties()

If you need to read all values from a section in properties file in a simple manner:
Your config.properties file layout :
[SECTION_NAME]
key1 = value1
key2 = value2
You code:
import configparser
config = configparser.RawConfigParser()
config.read('path_to_config.properties file')
details_dict = dict(config.items('SECTION_NAME'))
This will give you a dictionary where keys are same as in config file and their corresponding values.
details_dict is :
{'key1':'value1', 'key2':'value2'}
Now to get key1's value :
details_dict['key1']
Putting it all in a method which reads that section from config file only once(the first time the method is called during a program run).
def get_config_dict():
if not hasattr(get_config_dict, 'config_dict'):
get_config_dict.config_dict = dict(config.items('SECTION_NAME'))
return get_config_dict.config_dict
Now call the above function and get the required key's value :
config_details = get_config_dict()
key_1_value = config_details['key1']
-------------------------------------------------------------
Extending the approach mentioned above, reading section by section automatically and then accessing by section name followed by key name.
def get_config_section():
if not hasattr(get_config_section, 'section_dict'):
get_config_section.section_dict = dict()
for section in config.sections():
get_config_section.section_dict[section] =
dict(config.items(section))
return get_config_section.section_dict
To access:
config_dict = get_config_section()
port = config_dict['DB']['port']
(here 'DB' is a section name in config file
and 'port' is a key under section 'DB'.)

create a dictionary in your python module and store everything into it and access it, for example:
dict = {
'portalPath' : 'www.xyx.com',
'elementID': 'submit'}
Now to access it you can simply do:
submitButton = driver.find_element_by_id(dict['elementID'])

My Java ini files didn't have section headers and I wanted a dict as a result. So i simply injected an "[ini]" section and let the default config library do its job.
Take a version.ini fie of the eclipse IDE .metadata directory as an example:
#Mon Dec 20 07:35:29 CET 2021
org.eclipse.core.runtime=2
org.eclipse.platform=4.19.0.v20210303-1800
# 'injected' ini section
[ini]
#Mon Dec 20 07:35:29 CET 2021
org.eclipse.core.runtime=2
org.eclipse.platform=4.19.0.v20210303-1800
The result is converted to a dict:
from configparser import ConfigParser
#staticmethod
def readPropertyFile(path):
# https://stackoverflow.com/questions/3595363/properties-file-in-python-similar-to-java-properties
config = ConfigParser()
s_config= open(path, 'r').read()
s_config="[ini]\n%s" % s_config
# https://stackoverflow.com/a/36841741/1497139
config.read_string(s_config)
items=config.items('ini')
itemDict={}
for key,value in items:
itemDict[key]=value
return itemDict

This is what I'm doing in my project: I just create another .py file called properties.py which includes all common variables/properties I used in the project, and in any file need to refer to these variables, put
from properties import *(or anything you need)
Used this method to keep svn peace when I was changing dev locations frequently and some common variables were quite relative to local environment. Works fine for me but not sure this method would be suggested for formal dev environment etc.

import json
f=open('test.json')
x=json.load(f)
f.close()
print(x)
Contents of test.json:
{"host": "127.0.0.1", "user": "jms"}

I have created a python module that is almost similar to the Properties class of Java ( Actually it is like the PropertyPlaceholderConfigurer in spring which lets you use ${variable-reference} to refer to already defined property )
EDIT : You may install this package by running the command(currently tested for python 3).
pip install property
The project is hosted on GitHub
Example : ( Detailed documentation can be found here )
Let's say you have the following properties defined in my_file.properties file
foo = I am awesome
bar = ${chocolate}-bar
chocolate = fudge
Code to load the above properties
from properties.p import Property
prop = Property()
# Simply load it into a dictionary
dic_prop = prop.load_property_files('my_file.properties')

Below 2 lines of code shows how to use Python List Comprehension to load 'java style' property file.
split_properties=[line.split("=") for line in open('/<path_to_property_file>)]
properties={key: value for key,value in split_properties }
Please have a look at below post for details
https://ilearnonlinesite.wordpress.com/2017/07/24/reading-property-file-in-python-using-comprehension-and-generators/

you can use parameter "fromfile_prefix_chars" with argparse to read from config file as below---
temp.py
parser = argparse.ArgumentParser(fromfile_prefix_chars='#')
parser.add_argument('--a')
parser.add_argument('--b')
args = parser.parse_args()
print(args.a)
print(args.b)
config file
--a
hello
--b
hello dear
Run command
python temp.py "#config"

You could use - https://pypi.org/project/property/
eg - my_file.properties
foo = I am awesome
bar = ${chocolate}-bar
chocolate = fudge
long = a very long property that is described in the property file which takes up \
multiple lines can be defined by the escape character as it is done here
url=example.com/api?auth_token=xyz
user_dir=${HOME}/test
unresolved = ${HOME}/files/${id}/${bar}/
fname_template = /opt/myapp/{arch}/ext/{objid}.dat
Code
from properties.p import Property
## set use_env to evaluate properties from shell / os environment
prop = Property(use_env = True)
dic_prop = prop.load_property_files('my_file.properties')
## Read multiple files
## dic_prop = prop.load_property_files('file1', 'file2')
print(dic_prop)
# Output
# {'foo': 'I am awesome', 'bar': 'fudge-bar', 'chocolate': 'fudge',
# 'long': 'a very long property that is described in the property file which takes up multiple lines
# can be defined by the escape character as it is done here', 'url': 'example.com/api?auth_token=xyz',
# 'user_dir': '/home/user/test',
# 'unresolved': '/home/user/files/${id}/fudge-bar/',
# 'fname_template': '/opt/myapp/{arch}/ext/{objid}.dat'}

I did this using ConfigParser as follows. The code assumes that there is a file called config.prop in the same directory where BaseTest is placed:
config.prop
[CredentialSection]
app.name=MyAppName
BaseTest.py:
import unittest
import ConfigParser
class BaseTest(unittest.TestCase):
def setUp(self):
__SECTION = 'CredentialSection'
config = ConfigParser.ConfigParser()
config.readfp(open('config.prop'))
self.__app_name = config.get(__SECTION, 'app.name')
def test1(self):
print self.__app_name % This should print: MyAppName

This is what i had written to parse file and set it as env variables which skips comments and non key value lines added switches to specify
hg:d
-h or --help print usage summary
-c Specify char that identifies comment
-s Separator between key and value in prop file
and specify properties file that needs to be parsed eg : python
EnvParamSet.py -c # -s = env.properties
import pipes
import sys , getopt
import os.path
class Parsing :
def __init__(self , seprator , commentChar , propFile):
self.seprator = seprator
self.commentChar = commentChar
self.propFile = propFile
def parseProp(self):
prop = open(self.propFile,'rU')
for line in prop :
if line.startswith(self.commentChar)==False and line.find(self.seprator) != -1 :
keyValue = line.split(self.seprator)
key = keyValue[0].strip()
value = keyValue[1].strip()
print("export %s=%s" % (str (key),pipes.quote(str(value))))
class EnvParamSet:
def main (argv):
seprator = '='
comment = '#'
if len(argv) is 0:
print "Please Specify properties file to be parsed "
sys.exit()
propFile=argv[-1]
try :
opts, args = getopt.getopt(argv, "hs:c:f:", ["help", "seprator=","comment=", "file="])
except getopt.GetoptError,e:
print str(e)
print " possible arguments -s <key value sperator > -c < comment char > <file> \n Try -h or --help "
sys.exit(2)
if os.path.isfile(args[0])==False:
print "File doesnt exist "
sys.exit()
for opt , arg in opts :
if opt in ("-h" , "--help"):
print " hg:d \n -h or --help print usage summary \n -c Specify char that idetifes comment \n -s Sperator between key and value in prop file \n specify file "
sys.exit()
elif opt in ("-s" , "--seprator"):
seprator = arg
elif opt in ("-c" , "--comment"):
comment = arg
p = Parsing( seprator, comment , propFile)
p.parseProp()
if __name__ == "__main__":
main(sys.argv[1:])

Lightbend has released the Typesafe Config library, which parses properties files and also some JSON-based extensions. Lightbend's library is only for the JVM, but it seems to be widely adopted and there are now ports in many languages, including Python: https://github.com/chimpler/pyhocon

You can use the following function, which is the modified code of #mvallebr. It respects the properties file comments, ignores empty new lines, and allows retrieving a single key value.
def getProperties(propertiesFile ="/home/memin/.config/customMemin/conf.properties", key=''):
"""
Reads a .properties file and returns the key value pairs as dictionary.
if key value is specified, then it will return its value alone.
"""
with open(propertiesFile) as f:
l = [line.strip().split("=") for line in f.readlines() if not line.startswith('#') and line.strip()]
d = {key.strip(): value.strip() for key, value in l}
if key:
return d[key]
else:
return d

this works for me.
from pyjavaproperties import Properties
p = Properties()
p.load(open('test.properties'))
p.list()
print p
print p.items()
print p['name3']

I followed configparser approach and it worked quite well for me. Created one PropertyReader file and used config parser there to ready property to corresponding to each section.
**Used Python 2.7
Content of PropertyReader.py file:
#!/usr/bin/python
import ConfigParser
class PropertyReader:
def readProperty(self, strSection, strKey):
config = ConfigParser.RawConfigParser()
config.read('ConfigFile.properties')
strValue = config.get(strSection,strKey);
print "Value captured for "+strKey+" :"+strValue
return strValue
Content of read schema file:
from PropertyReader import *
class ReadSchema:
print PropertyReader().readProperty('source1_section','source_name1')
print PropertyReader().readProperty('source2_section','sn2_sc1_tb')
Content of .properties file:
[source1_section]
source_name1:module1
sn1_schema:schema1,schema2,schema3
sn1_sc1_tb:employee,department,location
sn1_sc2_tb:student,college,country
[source2_section]
source_name1:module2
sn2_schema:schema4,schema5,schema6
sn2_sc1_tb:employee,department,location
sn2_sc2_tb:student,college,country

You can try the python-dotenv library. This library reads key-value pairs from a .env (so not exactly a .properties file though) file and can set them as environment variables.
Here's a sample usage from the official documentation:
from dotenv import load_dotenv
load_dotenv() # take environment variables from .env.
# Code of your application, which uses environment variables (e.g. from `os.environ` or
# `os.getenv`) as if they came from the actual environment.