Related
Is it possible to forward-declare a function in Python? I want to sort a list using my own cmp function before it is declared.
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
I've put the definition of cmp_configs method after the invocation. It fails with this error:
NameError: name 'cmp_configs' is not defined
Is there any way to "declare" cmp_configs method before it's used?
Sometimes, it is difficult to reorganize code to avoid this problem. For instance, when implementing some forms of recursion:
def spam():
if end_condition():
return end_result()
else:
return eggs()
def eggs():
if end_condition():
return end_result()
else:
return spam()
Where end_condition and end_result have been previously defined.
Is the only solution to reorganize the code and always put definitions before invocations?
Wrap the invocation into a function of its own so that
foo()
def foo():
print "Hi!"
will break, but
def bar():
foo()
def foo():
print "Hi!"
bar()
will work properly.
The general rule in Python is that a function should be defined before its usage, which does not necessarily mean it needs to be higher in the code.
If you kick-start your script through the following:
if __name__=="__main__":
main()
then you probably do not have to worry about things like "forward declaration". You see, the interpreter would go loading up all your functions and then start your main() function. Of course, make sure you have all the imports correct too ;-)
Come to think of it, I've never heard such a thing as "forward declaration" in python... but then again, I might be wrong ;-)
If you don't want to define a function before it's used, and defining it afterwards is impossible, what about defining it in some other module?
Technically you still define it first, but it's clean.
You could create a recursion like the following:
def foo():
bar()
def bar():
foo()
Python's functions are anonymous just like values are anonymous, yet they can be bound to a name.
In the above code, foo() does not call a function with the name foo, it calls a function that happens to be bound to the name foo at the point the call is made. It is possible to redefine foo somewhere else, and bar would then call the new function.
Your problem cannot be solved because it's like asking to get a variable which has not been declared.
I apologize for reviving this thread, but there was a strategy not discussed here which may be applicable.
Using reflection it is possible to do something akin to forward declaration. For instance lets say you have a section of code that looks like this:
# We want to call a function called 'foo', but it hasn't been defined yet.
function_name = 'foo'
# Calling at this point would produce an error
# Here is the definition
def foo():
bar()
# Note that at this point the function is defined
# Time for some reflection...
globals()[function_name]()
So in this way we have determined what function we want to call before it is actually defined, effectively a forward declaration. In python the statement globals()[function_name]() is the same as foo() if function_name = 'foo' for the reasons discussed above, since python must lookup each function before calling it. If one were to use the timeit module to see how these two statements compare, they have the exact same computational cost.
Of course the example here is very useless, but if one were to have a complex structure which needed to execute a function, but must be declared before (or structurally it makes little sense to have it afterwards), one can just store a string and try to call the function later.
If the call to cmp_configs is inside its own function definition, you should be fine. I'll give an example.
def a():
b() # b() hasn't been defined yet, but that's fine because at this point, we're not
# actually calling it. We're just defining what should happen when a() is called.
a() # This call fails, because b() hasn't been defined yet,
# and thus trying to run a() fails.
def b():
print "hi"
a() # This call succeeds because everything has been defined.
In general, putting your code inside functions (such as main()) will resolve your problem; just call main() at the end of the file.
There is no such thing in python like forward declaration. You just have to make sure that your function is declared before it is needed.
Note that the body of a function isn't interpreted until the function is executed.
Consider the following example:
def a():
b() # won't be resolved until a is invoked.
def b():
print "hello"
a() # here b is already defined so this line won't fail.
You can think that a body of a function is just another script that will be interpreted once you call the function.
Sometimes an algorithm is easiest to understand top-down, starting with the overall structure and drilling down into the details.
You can do so without forward declarations:
def main():
make_omelet()
eat()
def make_omelet():
break_eggs()
whisk()
fry()
def break_eggs():
for egg in carton:
break(egg)
# ...
main()
# declare a fake function (prototype) with no body
def foo(): pass
def bar():
# use the prototype however you see fit
print(foo(), "world!")
# define the actual function (overwriting the prototype)
def foo():
return "Hello,"
bar()
Output:
Hello, world!
No, I don't believe there is any way to forward-declare a function in Python.
Imagine you are the Python interpreter. When you get to the line
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
either you know what cmp_configs is or you don't. In order to proceed, you have to
know cmp_configs. It doesn't matter if there is recursion.
You can't forward-declare a function in Python. If you have logic executing before you've defined functions, you've probably got a problem anyways. Put your action in an if __name__ == '__main__' at the end of your script (by executing a function you name "main" if it's non-trivial) and your code will be more modular and you'll be able to use it as a module if you ever need to.
Also, replace that list comprehension with a generator express (i.e., print "\n".join(str(bla) for bla in sorted(mylist, cmp=cmp_configs)))
Also, don't use cmp, which is deprecated. Use key and provide a less-than function.
Import the file itself. Assuming the file is called test.py:
import test
if __name__=='__main__':
test.func()
else:
def func():
print('Func worked')
TL;DR: Python does not need forward declarations. Simply put your function calls inside function def definitions, and you'll be fine.
def foo(count):
print("foo "+str(count))
if(count>0):
bar(count-1)
def bar(count):
print("bar "+str(count))
if(count>0):
foo(count-1)
foo(3)
print("Finished.")
recursive function definitions, perfectly successfully gives:
foo 3
bar 2
foo 1
bar 0
Finished.
However,
bug(13)
def bug(count):
print("bug never runs "+str(count))
print("Does not print this.")
breaks at the top-level invocation of a function that hasn't been defined yet, and gives:
Traceback (most recent call last):
File "./test1.py", line 1, in <module>
bug(13)
NameError: name 'bug' is not defined
Python is an interpreted language, like Lisp. It has no type checking, only run-time function invocations, which succeed if the function name has been bound and fail if it's unbound.
Critically, a function def definition does not execute any of the funcalls inside its lines, it simply declares what the function body is going to consist of. Again, it doesn't even do type checking. So we can do this:
def uncalled():
wild_eyed_undefined_function()
print("I'm not invoked!")
print("Only run this one line.")
and it runs perfectly fine (!), with output
Only run this one line.
The key is the difference between definitions and invocations.
The interpreter executes everything that comes in at the top level, which means it tries to invoke it. If it's not inside a definition.
Your code is running into trouble because you attempted to invoke a function, at the top level in this case, before it was bound.
The solution is to put your non-top-level function invocations inside a function definition, then call that function sometime much later.
The business about "if __ main __" is an idiom based on this principle, but you have to understand why, instead of simply blindly following it.
There are certainly much more advanced topics concerning lambda functions and rebinding function names dynamically, but these are not what the OP was asking for. In addition, they can be solved using these same principles: (1) defs define a function, they do not invoke their lines; (2) you get in trouble when you invoke a function symbol that's unbound.
Python does not support forward declarations, but common workaround for this is use of the the following condition at the end of your script/code:
if __name__ == '__main__': main()
With this it will read entire file first and then evaluate condition and call main() function which will be able to call any forward declared function as it already read the entire file first. This condition leverages special variable __name__ which returns __main__ value whenever we run Python code from current file (when code was imported as a module, then __name__ returns module name).
"just reorganize my code so that I don't have this problem." Correct. Easy to do. Always works.
You can always provide the function prior to it's reference.
"However, there are cases when this is probably unavoidable, for instance when implementing some forms of recursion"
Can't see how that's even remotely possible. Please provide an example of a place where you cannot define the function prior to it's use.
Now wait a minute. When your module reaches the print statement in your example, before cmp_configs has been defined, what exactly is it that you expect it to do?
If your posting of a question using print is really trying to represent something like this:
fn = lambda mylist:"\n".join([str(bla)
for bla in sorted(mylist, cmp = cmp_configs)])
then there is no requirement to define cmp_configs before executing this statement, just define it later in the code and all will be well.
Now if you are trying to reference cmp_configs as a default value of an argument to the lambda, then this is a different story:
fn = lambda mylist,cmp_configs=cmp_configs : \
"\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
Now you need a cmp_configs variable defined before you reach this line.
[EDIT - this next part turns out not to be correct, since the default argument value will get assigned when the function is compiled, and that value will be used even if you change the value of cmp_configs later.]
Fortunately, Python being so type-accommodating as it is, does not care what you define as cmp_configs, so you could just preface with this statement:
cmp_configs = None
And the compiler will be happy. Just be sure to declare the real cmp_configs before you ever invoke fn.
Python technically has support for forward declaration.
if you define a function/class then set the body to pass, it will have an empty entry in the global table.
you can then "redefine" the function/class later on to implement the function/class.
unlike c/c++ forward declaration though, this does not work from outside the scope (i.e. another file) as they have their own "global" namespace
example:
def foo(): pass
foo()
def foo(): print("FOOOOO")
foo()
foo is declared both times
however the first time foo is called it does not do anything as the body is just pass
but the second time foo is called. it executes the new body of print("FOOOOO")
but again. note that this does not fix circular dependancies. this is because files have their own name and have their own definitions of functions
example 2:
class bar: pass
print(bar)
this prints <class '__main__.bar'> but if it was declared in another file it would be <class 'otherfile.foo'>
i know this post is old, but i though that this answer would be useful to anyone who keeps finding this post after the many years it has been posted for
One way is to create a handler function. Define the handler early on, and put the handler below all the methods you need to call.
Then when you invoke the handler method to call your functions, they will always be available.
The handler could take an argument nameOfMethodToCall. Then uses a bunch of if statements to call the right method.
This would solve your issue.
def foo():
print("foo")
#take input
nextAction=input('What would you like to do next?:')
return nextAction
def bar():
print("bar")
nextAction=input('What would you like to do next?:')
return nextAction
def handler(action):
if(action=="foo"):
nextAction = foo()
elif(action=="bar"):
nextAction = bar()
else:
print("You entered invalid input, defaulting to bar")
nextAction = "bar"
return nextAction
nextAction=input('What would you like to do next?:')
while 1:
nextAction = handler(nextAction)
I am trying to create a dynamic method executor, where I have a list that will always contain two elements. The first element is the name of the file, the second element is the name of the method to execute.
How can I achieve this?
My below code unfortunately doesn't work, but it will give you an good indication of what I am trying to achieve.
from logic.intents import CenterCapacity
def method_executor(event):
call_reference = ['CenterCapacity', 'get_capacity']
# process method call
return call_reference[0].call_reference[1]
Thanks!
You can use __import__ to look up the module by name and then then use getattr to find the method. For example if the following code is in a file called exec.py then
def dummy(): print("dummy")
def lookup(mod, func):
module = __import__(mod)
return getattr(module, func)
if __name__ == "__main__":
lookup("exec","dummy")()
will output
dummy
Addendum
Alternatively importlib.import_module can be used, which although a bit more verbose, may be easier to use.
The most important difference between these two functions is that import_module() returns the specified package or module (e.g. pkg.mod), while __import__() returns the top-level package or module (e.g. pkg).
def lookup(mod, func):
import importlib
module = importlib.import_module(mod)
return getattr(module, func)
starting from:
from logic.intents import CenterCapacity
def method_executor(event):
call_reference = ['CenterCapacity', 'get_capacity']
# process method call
return call_reference[0].call_reference[1]
Option 1
We have several options, the first one is using a class reference and the getattr. For this we have to remove the ' around the class and instantiate the class before calling a reference (you do not have to instantiate the class when the method is a staticmethod.)
def method_executor(event):
call_reference = [CenterCapacity, 'get_capacity'] # We now store a class reference
# process method call
return getattr(call_reference[0](), call_reference[1])
option 2
A second option is based on this answer. It revolves around using the getattr method twice. We firstly get module using sys.modules[__name__] and then get the class from there using getattr.
import sys
def method_executor(event):
call_reference = ['CenterCapacity', 'get_capacity']
class_ref = getattr(sys.modules[__name__], call_reference[0])
return getattr(class_ref, call_reference[1])
Option 3
A third option could be based on a full import path and use __import__('module.class'), take a look at this SO post.
(Note: This answer assumes that the necessary imports have already happened, and you just need a mechanism to invoke the functions of the imported modules. If you also want the import do be done by some program code, I will have to add that part, using importlib library)
You can do this:
globals()[call_reference[0]].__dict__[call_reference[1]]()
Explanation:
globals() returns a mapping between global variable names and their referenced objects. The imported module's name counts as one of these global variables of the current module.
Indexing this mapping object with call_reference[0] returns the module object containing the function to be called.
The module object's __dict__ maps each attribute-name of the module to the object referenced by that attribute. Functions defined in the module also count as attributes of the module.
Thus, indexing __dict__ with the function name call_reference[1] returns the function object.
Is it possible to forward-declare a function in Python? I want to sort a list using my own cmp function before it is declared.
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
I've put the definition of cmp_configs method after the invocation. It fails with this error:
NameError: name 'cmp_configs' is not defined
Is there any way to "declare" cmp_configs method before it's used?
Sometimes, it is difficult to reorganize code to avoid this problem. For instance, when implementing some forms of recursion:
def spam():
if end_condition():
return end_result()
else:
return eggs()
def eggs():
if end_condition():
return end_result()
else:
return spam()
Where end_condition and end_result have been previously defined.
Is the only solution to reorganize the code and always put definitions before invocations?
Wrap the invocation into a function of its own so that
foo()
def foo():
print "Hi!"
will break, but
def bar():
foo()
def foo():
print "Hi!"
bar()
will work properly.
The general rule in Python is that a function should be defined before its usage, which does not necessarily mean it needs to be higher in the code.
If you kick-start your script through the following:
if __name__=="__main__":
main()
then you probably do not have to worry about things like "forward declaration". You see, the interpreter would go loading up all your functions and then start your main() function. Of course, make sure you have all the imports correct too ;-)
Come to think of it, I've never heard such a thing as "forward declaration" in python... but then again, I might be wrong ;-)
If you don't want to define a function before it's used, and defining it afterwards is impossible, what about defining it in some other module?
Technically you still define it first, but it's clean.
You could create a recursion like the following:
def foo():
bar()
def bar():
foo()
Python's functions are anonymous just like values are anonymous, yet they can be bound to a name.
In the above code, foo() does not call a function with the name foo, it calls a function that happens to be bound to the name foo at the point the call is made. It is possible to redefine foo somewhere else, and bar would then call the new function.
Your problem cannot be solved because it's like asking to get a variable which has not been declared.
I apologize for reviving this thread, but there was a strategy not discussed here which may be applicable.
Using reflection it is possible to do something akin to forward declaration. For instance lets say you have a section of code that looks like this:
# We want to call a function called 'foo', but it hasn't been defined yet.
function_name = 'foo'
# Calling at this point would produce an error
# Here is the definition
def foo():
bar()
# Note that at this point the function is defined
# Time for some reflection...
globals()[function_name]()
So in this way we have determined what function we want to call before it is actually defined, effectively a forward declaration. In python the statement globals()[function_name]() is the same as foo() if function_name = 'foo' for the reasons discussed above, since python must lookup each function before calling it. If one were to use the timeit module to see how these two statements compare, they have the exact same computational cost.
Of course the example here is very useless, but if one were to have a complex structure which needed to execute a function, but must be declared before (or structurally it makes little sense to have it afterwards), one can just store a string and try to call the function later.
If the call to cmp_configs is inside its own function definition, you should be fine. I'll give an example.
def a():
b() # b() hasn't been defined yet, but that's fine because at this point, we're not
# actually calling it. We're just defining what should happen when a() is called.
a() # This call fails, because b() hasn't been defined yet,
# and thus trying to run a() fails.
def b():
print "hi"
a() # This call succeeds because everything has been defined.
In general, putting your code inside functions (such as main()) will resolve your problem; just call main() at the end of the file.
There is no such thing in python like forward declaration. You just have to make sure that your function is declared before it is needed.
Note that the body of a function isn't interpreted until the function is executed.
Consider the following example:
def a():
b() # won't be resolved until a is invoked.
def b():
print "hello"
a() # here b is already defined so this line won't fail.
You can think that a body of a function is just another script that will be interpreted once you call the function.
Sometimes an algorithm is easiest to understand top-down, starting with the overall structure and drilling down into the details.
You can do so without forward declarations:
def main():
make_omelet()
eat()
def make_omelet():
break_eggs()
whisk()
fry()
def break_eggs():
for egg in carton:
break(egg)
# ...
main()
# declare a fake function (prototype) with no body
def foo(): pass
def bar():
# use the prototype however you see fit
print(foo(), "world!")
# define the actual function (overwriting the prototype)
def foo():
return "Hello,"
bar()
Output:
Hello, world!
No, I don't believe there is any way to forward-declare a function in Python.
Imagine you are the Python interpreter. When you get to the line
print "\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
either you know what cmp_configs is or you don't. In order to proceed, you have to
know cmp_configs. It doesn't matter if there is recursion.
You can't forward-declare a function in Python. If you have logic executing before you've defined functions, you've probably got a problem anyways. Put your action in an if __name__ == '__main__' at the end of your script (by executing a function you name "main" if it's non-trivial) and your code will be more modular and you'll be able to use it as a module if you ever need to.
Also, replace that list comprehension with a generator express (i.e., print "\n".join(str(bla) for bla in sorted(mylist, cmp=cmp_configs)))
Also, don't use cmp, which is deprecated. Use key and provide a less-than function.
Import the file itself. Assuming the file is called test.py:
import test
if __name__=='__main__':
test.func()
else:
def func():
print('Func worked')
TL;DR: Python does not need forward declarations. Simply put your function calls inside function def definitions, and you'll be fine.
def foo(count):
print("foo "+str(count))
if(count>0):
bar(count-1)
def bar(count):
print("bar "+str(count))
if(count>0):
foo(count-1)
foo(3)
print("Finished.")
recursive function definitions, perfectly successfully gives:
foo 3
bar 2
foo 1
bar 0
Finished.
However,
bug(13)
def bug(count):
print("bug never runs "+str(count))
print("Does not print this.")
breaks at the top-level invocation of a function that hasn't been defined yet, and gives:
Traceback (most recent call last):
File "./test1.py", line 1, in <module>
bug(13)
NameError: name 'bug' is not defined
Python is an interpreted language, like Lisp. It has no type checking, only run-time function invocations, which succeed if the function name has been bound and fail if it's unbound.
Critically, a function def definition does not execute any of the funcalls inside its lines, it simply declares what the function body is going to consist of. Again, it doesn't even do type checking. So we can do this:
def uncalled():
wild_eyed_undefined_function()
print("I'm not invoked!")
print("Only run this one line.")
and it runs perfectly fine (!), with output
Only run this one line.
The key is the difference between definitions and invocations.
The interpreter executes everything that comes in at the top level, which means it tries to invoke it. If it's not inside a definition.
Your code is running into trouble because you attempted to invoke a function, at the top level in this case, before it was bound.
The solution is to put your non-top-level function invocations inside a function definition, then call that function sometime much later.
The business about "if __ main __" is an idiom based on this principle, but you have to understand why, instead of simply blindly following it.
There are certainly much more advanced topics concerning lambda functions and rebinding function names dynamically, but these are not what the OP was asking for. In addition, they can be solved using these same principles: (1) defs define a function, they do not invoke their lines; (2) you get in trouble when you invoke a function symbol that's unbound.
Python does not support forward declarations, but common workaround for this is use of the the following condition at the end of your script/code:
if __name__ == '__main__': main()
With this it will read entire file first and then evaluate condition and call main() function which will be able to call any forward declared function as it already read the entire file first. This condition leverages special variable __name__ which returns __main__ value whenever we run Python code from current file (when code was imported as a module, then __name__ returns module name).
"just reorganize my code so that I don't have this problem." Correct. Easy to do. Always works.
You can always provide the function prior to it's reference.
"However, there are cases when this is probably unavoidable, for instance when implementing some forms of recursion"
Can't see how that's even remotely possible. Please provide an example of a place where you cannot define the function prior to it's use.
Now wait a minute. When your module reaches the print statement in your example, before cmp_configs has been defined, what exactly is it that you expect it to do?
If your posting of a question using print is really trying to represent something like this:
fn = lambda mylist:"\n".join([str(bla)
for bla in sorted(mylist, cmp = cmp_configs)])
then there is no requirement to define cmp_configs before executing this statement, just define it later in the code and all will be well.
Now if you are trying to reference cmp_configs as a default value of an argument to the lambda, then this is a different story:
fn = lambda mylist,cmp_configs=cmp_configs : \
"\n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])
Now you need a cmp_configs variable defined before you reach this line.
[EDIT - this next part turns out not to be correct, since the default argument value will get assigned when the function is compiled, and that value will be used even if you change the value of cmp_configs later.]
Fortunately, Python being so type-accommodating as it is, does not care what you define as cmp_configs, so you could just preface with this statement:
cmp_configs = None
And the compiler will be happy. Just be sure to declare the real cmp_configs before you ever invoke fn.
Python technically has support for forward declaration.
if you define a function/class then set the body to pass, it will have an empty entry in the global table.
you can then "redefine" the function/class later on to implement the function/class.
unlike c/c++ forward declaration though, this does not work from outside the scope (i.e. another file) as they have their own "global" namespace
example:
def foo(): pass
foo()
def foo(): print("FOOOOO")
foo()
foo is declared both times
however the first time foo is called it does not do anything as the body is just pass
but the second time foo is called. it executes the new body of print("FOOOOO")
but again. note that this does not fix circular dependancies. this is because files have their own name and have their own definitions of functions
example 2:
class bar: pass
print(bar)
this prints <class '__main__.bar'> but if it was declared in another file it would be <class 'otherfile.foo'>
i know this post is old, but i though that this answer would be useful to anyone who keeps finding this post after the many years it has been posted for
One way is to create a handler function. Define the handler early on, and put the handler below all the methods you need to call.
Then when you invoke the handler method to call your functions, they will always be available.
The handler could take an argument nameOfMethodToCall. Then uses a bunch of if statements to call the right method.
This would solve your issue.
def foo():
print("foo")
#take input
nextAction=input('What would you like to do next?:')
return nextAction
def bar():
print("bar")
nextAction=input('What would you like to do next?:')
return nextAction
def handler(action):
if(action=="foo"):
nextAction = foo()
elif(action=="bar"):
nextAction = bar()
else:
print("You entered invalid input, defaulting to bar")
nextAction = "bar"
return nextAction
nextAction=input('What would you like to do next?:')
while 1:
nextAction = handler(nextAction)
I have an imported module in my code. The module contains a function defined in it. The function does not return any value. In my code, I want to access a variable declared in that function. Is there a way to do it?
Edit:
So, there is a module inside an OSS which is generating a speech sequence. But the speech sequence variable is not global, neither the function returns the speech sequence. I want to access the speech sequence in my addon.
If your function looks like this:
def function():
...
my_variable = "foo"
Then you can add a parameter that would force that variable to be returned along with anything that is being returned. So the function would look like this.
def function(get_variable=False):
...
return_variable = "bar"
my_variable = "foo"
if get_variable:
return (my_variable, return_variable)
else:
return return_variable
And then access it like this:
import module
my_variable, return_variable = module.function(get_variable=True)
You don't need this sort of hack if your function doesn't return anything at all. Just make it return the variable you want and assign it to something inside your main code's scope.
In a file lib.py I defined a functional class C and an enumeration class E as follows:
class C:
a = None
def meth(self, v):
if v == E.v1:
print("In C.meth().v1")
a = E.v1
if v == E.v2:
print("In C.meth().v2")
a = E.v2
from enum import Enum
class E(Enum):
print("In Enum")
v1 = 1
v2 = 2
Then, I import the two classes into my module main.py and use the enumeration:
from lib import C
from lib import E
c = C()
c.meth(E.v1)
When running, I get the following output:
In Enum
In C.meth().v1
Now, since Python is an interpreted language (at least, when using IDLE), I'd expect to get an error on the reference to the enumerations in the method meth. Since there is no error, and it seems to run OK, I wonder what are the (ordering) rules for referencing classes in the same module, and in between different modules? Why is there no error?
Name lookup happens at run time. So when you are defining class C and its method meth, then the lookup on E isn’t done yet. So it’s not a problem that you define it afterwards. Instead, the lookup happens when you call the method.
Also, name lookup happens by going up the scope, so meth will find the original E declared on module level, regardless of whether you import it in your main.py or not. Since you also import E in main.py, which is a reference to the same object, you can reference the same enum value in there too.
See also this example:
>>> def test(): # foo is not defined at this time
print(foo)
>>> test()
NameError: global name 'foo' is not defined
>>> foo = 'bar' # after defining foo, it works:
>>> test()
bar
When defining methods, variables are never “embedded”; the methods only contain the names and those names are looked up at run-time. However, due to how Python does the lookup, names of local variables are always “around” even if they haven’t been initialized yet. This can result in UnboundLocalErrors:
>>> def test():
print(foo)
foo = 'baz'
>>> test()
UnboundLocalError: local variable 'foo' referenced before assignment
One might expect that foo would be looked up in the outer scope for the first print, but because there is a local foo (even if it wasn’t initialized yet), foo will always* resolve to the local foo.
(* The nonlocal statement allows to make foo non-local, resolving it to the outer scope—again for all uses of foo in that method.)
When a module is imported, the commands are executed from top to bottom. Inside a class-definition, the commands are also executed, to define the methods inside the class. A def defines a method, but the commands inside the def are not executed, but only parsed.
The simplest way to understand the order of evaluation in your code is is to watch it execute:
http://dbgr.cc/q
Press the play button on the far right of the debug buttons and it will automatically step through.
I think what is confusing to you is that when class E is defined, all statements inside of the E class are run. This is the case for every class definition. This includes calling the print function to say "In Enum", as well as defining the v1 and v2 members of the E class.
The line c.meth(E.v1) isn't executed until both the C and the E classes have been defined, which means that E.v1 has also already been defined. This is why there is no error like you were expecting.