I'm trying to create a filename of a variable and it's more difficult than i realised!
I want to use the value of the TESTNAME variable as the name of the new file.
import re
with open('output.csv', 'r') as rf:
body = rf.read()
for line in body:
newbody = body.rsplit("'")[0]
print(newbody)
SYMNAME = newbody
with open('TEST.txt', 'w') as wf:
wf.close
If i print(TESTNAME), the value is HISTORY, but if i add it to the wf, i get this error:
[Errno 22] Invalid argument: 'HISTORY\n'
I'd like the new file to be called HISTORY.txt via the variable..
The problem is that there is a newline in your filename. You can use TESTNAME.strip() as the filename instead to get rid of the trailing newline
You can open and write to a file with
with open(TESTNAME+'.txt') as wf:
wf.write("some content in your new file\n")
wf.close won't do anything, to close a file you need to call wf.close(), the parenthesis here is important. Also , you don't actually need to call wf.close(), since using with ... will automatically close() the file.
Related
I am stuck on this revision exercise which asks to copy an input file to an output file and return the first and last letters.
def copy_file(filename):
input_file = open(filename, "r")
content = input_file.read()
content[0]
content[1]
return content[0] + content[-1]
input_file.close()
Why do I get an error message which I try get the first and last letters? And how would I copy the file to the output file?
Here is the test:
input_f = "FreeAdvice.txt"
first_last_chars = copy_file(input_f)
print(first_last_chars)
print_content('cure737.txt')
Error Message:
FileNotFoundError: [Errno 2] No such file or directory: 'hjac737(my username).txt'
All the code after a return statement is never executed, a proper code editor would highlight it to you, so I recommend you use one. So the file was never closed. A good practice is to use a context manager for that : it will automatically call close for you, even in case of an exception, when you exit the scope (indentation level).
The code you provided also miss to write the file content, which may be causing the error you reported.
I explicitely used the "rt" (and "wt") mode for the files (althought they are defaults), because we want the first and last character of the file, so it supports Unicode (any character, not just ASCII).
def copy_file(filename):
with open(filename, "rt") as input_file:
content = input_file.read()
print(input_file.closed) # True
my_username = "LENORMJU"
output_file_name = my_username + ".txt"
with open(output_file_name, "wt") as output_file:
output_file.write(content)
print(output_file.closed) # True
# last: return the result
return content[0] + content[-1]
print(copy_file("so67730842.py"))
When I run this script (on itself), the file is copied and I get the output d) which is correct.
I'm trying to learn to manipulate files on python, but I can't get the open function to work. I have made a .txt file called foo that holds the content "hello world!" in my user directory (/home/yonatan) and typed this line into the shell:
open('/home/yonatan/foo.txt')
What i get in return is:
<_io.TextIOWrapper name='/home/yonatan/foo.txt' mode='r' encoding='UTF-8'>
I get what that means, but why don't I get the content?
open() returns a file object.
You then need to use read() to read the whole file
f = open('/home/yonatan/foo.txt', 'r')
contents = f.read()
Or you can use readline() to read just one line
line = f.readline()
and don't forget to close the file at the end
f.close()
An example iterating through the lines of the file (using with which ensures file.close() gets called on the end of it's lexical scope):
file_path = '/home/yonatan/foo.txt'
with open(file_path) as file:
for line in file:
print line
A great resource on I/O and file handling operations.
You haven't specified the mode you want to open it in.
Try:
f = open("home/yonatan/foo.txt", "r")
print(f.read())
Goal = Open file, encrypt file, write encrypted file.
Trying to use the PyPDF2 module to accomplish this. I have verified theat "input" is a file type object. I have researched this error and it translates to "file not found". I believe that it is linked somehow to the file/file path but am unsure how to debug or troubleshoot. and getting the following error:
Traceback (most recent call last):
File "CommissionSecurity.py", line 52, in <module>
inputStream = PyPDF2.PdfFileReader(input)
File "build\bdist.win-amd64\egg\PyPDF2\pdf.py", line 1065, in __init__
File "build\bdist.win-amd64\egg\PyPDF2\pdf.py", line 1660, in read
IOError: [Errno 22] Invalid argument
Below is the relevant code. I'm not sure how to correct this issue because I'm not really sure what the issue is. Any guidance is appreciated.
for ID in FileDict:
if ID in EmailDict :
path = "C:\\Apps\\CorVu\\DATA\\Reports\\AlliD\\Monthly Commission Reports\\Output\\pdcom1\\"
#print os.listdir(path)
file = os.path.join(path + FileDict[ID])
with open(file, 'rb') as input:
print type(input)
inputStream = PyPDF2.PdfFileReader(input)
output = PyPDF2.PdfFileWriter()
output = inputStream.encrypt(EmailDict[ID][1])
with open(file, 'wb') as outputStream:
output.write(outputStream)
else : continue
I think your problem might be caused by the fact that you use the same filename to both open and write to the file, opening it twice:
with open(file, 'rb') as input :
with open(file, 'wb') as outputStream :
The w mode will truncate the file, thus the second line truncates the input.
I'm not sure what you're intention is, because you can't really try to read from the (beginning) of the file, and at the same time overwrite it. Even if you try to write to the end of the file, you'll have to position the file pointer somewhere.
So create an extra output file that has a different name; you can always rename that output file to your input file after both files are closed, thus overwriting your input file.
Or you could first read the complete file into memory, then write to it:
with open(file, 'rb') as input:
inputStream = PyPDF2.PdfFileReader(input)
output = PyPDF2.PdfFileWriter()
output = input.encrypt(EmailDict[ID][1])
with open(file, 'wb') as outputStream:
output.write(outputStream)
Notes:
you assign inputStream, but never use it
you assign PdfFileWriter() to output, and then assign something else to output in the next line. Hence, you never used the result from the first output = line.
Please check carefully what you're doing, because it feels there are numerous other problems with your code.
Alternatively, here are some other tips that may help:
The documentation suggests that you can also use the filename as first argument to PdfFileReader:
stream – A File object or an object that supports the standard read
and seek methods similar to a File object. Could also be a string
representing a path to a PDF file.
So try:
inputStream = PyPDF2.PdfFileReader(file)
You can also try to set the strict argument to False:
strict (bool) – Determines whether user should be warned of all
problems and also causes some correctable problems to be fatal.
Defaults to True.
For example:
inputStream = PyPDF2.PdfFileReader(file, strict=False)
Using open(file, 'rb') was causing the issue becuase PdfFileReader() does that automagically. I just removed the with statement and that corrected the problem.
with open(file, 'rb') as input:
inputStream = PyPDF2.PdfFileReader(input)
This error raised up because of PDF file is empty.
My PDF file was empty that's why my error was raised up. So First of all i fill my PDF file with some data and Then start reeading it using PyPDF2.PdfFileReader,
And it solved my Problem!!!
Late but, you may be opening an invalid PDF file or an empty file that's named x.pdf and you think it's a PDF file
I'm having a problem opening the names.txt file. I have checked that I am in the correct directory. Below is my code:
import os
print(os.getcwd())
def alpha_sort():
infile = open('names', 'r')
string = infile.read()
string = string.replace('"','')
name_list = string.split(',')
name_list.sort()
infile.close()
return 0
alpha_sort()
And the error I got:
FileNotFoundError: [Errno 2] No such file or directory: 'names'
Any ideas on what I'm doing wrong?
You mention in your question body that the file is "names.txt", however your code shows you trying to open a file called "names" (without the ".txt" extension). (Extensions are part of filenames.)
Try this instead:
infile = open('names.txt', 'r')
As a side note, make sure that when you open files you use universal mode, as windows and mac/unix have different representations of carriage returns (/r/n vs /n etc.). Universal mode gets python to handle this, so it's generally a good idea to use it whenever you need to read a file. (EDIT - should read: a text file, thanks cameron)
So the code would just look like this
infile = open( 'names.txt', 'rU' ) #capital U indicated to open the file in universal mode
This doesn't solve that issue, but you might consider using with when opening files:
with open('names', 'r') as infile:
string = infile.read()
string = string.replace('"','')
name_list = string.split(',')
name_list.sort()
return 0
This closes the file for you and handles exceptions as well.
So my code looks like this ....
but I want to add data always to the end of the document
how would I do this
try:
f = open("file.txt", "w")
try:
f.write('blah') # Write a string to a file
f.writelines(lines) # Write a sequence of strings to a file
finally:
f.close()
except IOError:
pass
Open the file using 'a' (append) instead of 'w' (write, truncate)
Besides that, you can do the following isntead of the try..finally block:
with open('file.txt', 'a') as f:
f.write('blah')
f.writelines(lines)
The with block automatically takes care about closing the file at the end of the block.
open the file with "a" instead of "w"