Related
I have a python program where I need to load and de-serialize a 1GB pickle file. It takes a good 20 seconds and I would like to have a mechanism whereby the content of the pickle is readily available for use. I've looked at shared_memory but all the examples of its use seem to involve numpy and my project doesn't use numpy. What is the easiest and cleanest way to achieve this using shared_memory or otherwise?
This is how I'm loading the data now (on every run):
def load_pickle(pickle_name):
return pickle.load(open(DATA_ROOT + pickle_name, 'rb'))
I would like to be able to edit the simulation code in between runs without having to reload the pickle. I've been messing around with importlib.reload but it really doesn't seem to work well for a large Python program with many file:
def main():
data_manager.load_data()
run_simulation()
while True:
try:
importlib.reload(simulation)
run_simulation()
except:
print(traceback.format_exc())
print('Press enter to re-run main.py, CTRL-C to exit')
sys.stdin.readline()
This could be an XY problem, the source of which being the assumption that you must use pickles at all; they're just awful to deal with due to how they manage dependencies and are fundamentally a poor choice for any long-term data storage because of it
The source financial data is almost-certainly in some tabular form to begin with, so it may be possible to request it in a friendlier format
A simple middleware to deserialize and reserialize the pickles in the meantime will smooth the transition
input -> load pickle -> write -> output
Converting your workflow to use Parquet or Feather which are designed to be efficient to read and write will almost-certainly make a considerable difference to your load speed
Further relevant links
Answer to How to reversibly store and load a Pandas dataframe to/from disk
What are the pros and cons of parquet format compared to other formats?
You may also be able to achieve this with hickle, which will internally use a HDH5 format, ideally making it significantly faster than pickle, while still behaving like one
An alternative to storing the unpickled data in memory would be to store the pickle in a ramdisk, so long as most of the time overhead comes from disk reads. Example code (to run in a terminal) is below.
sudo mkdir mnt/pickle
mount -o size=1536M -t tmpfs none /mnt/pickle
cp path/to/pickle.pkl mnt/pickle/pickle.pkl
Then you can access the pickle at mnt/pickle/pickle.pkl. Note that you can change the file names and extensions to whatever you want. If disk read is not the biggest bottleneck, you might not see a speed increase. If you run out of memory, you can try turning down the size of the ramdisk (I set it at 1536 mb, or 1.5gb)
You can use shareable list:
So you will have 1 python program running which will load the file and save it in memory and another python program which can take the file from memory. Your data, whatever is it you can load it in dictionary and then dump it as json and then reload json.
So
Program1
import pickle
import json
from multiprocessing.managers import SharedMemoryManager
YOUR_DATA=pickle.load(open(DATA_ROOT + pickle_name, 'rb'))
data_dict={'DATA':YOUR_DATA}
data_dict_json=json.dumps(data_dict)
smm = SharedMemoryManager()
smm.start()
sl = smm.ShareableList(['alpha','beta',data_dict_json])
print (sl)
#smm.shutdown() commenting shutdown now but you will need to do it eventually
The output will look like this
#OUTPUT
>>>ShareableList(['alpha', 'beta', "your data in json format"], name='psm_12abcd')
Now in Program2:
from multiprocessing import shared_memory
load_from_mem=shared_memory.ShareableList(name='psm_12abcd')
load_from_mem[1]
#OUTPUT
'beta'
load_from_mem[2]
#OUTPUT
yourdataindictionaryformat
You can look for more over here
https://docs.python.org/3/library/multiprocessing.shared_memory.html
Adding another assumption-challenging answer, it could be where you're reading your files from that makes a big difference
1G is not a great amount of data with today's systems; at 20 seconds to load, that's only 50MB/s, which is a fraction of what even the slowest disks provide
You may find you actually have a slow disk or some type of network share as your real bottleneck and that changing to a faster storage medium or compressing the data (perhaps with gzip) makes a great difference to read and writing
Here are my assumptions while writing this answer:
Your Financial data is being produced after complex operations and you want the result to persist in memory
The code that consumes must be able to access that data fast
You wish to use shared memory
Here are the codes (self-explanatory, I believe)
Data structure
'''
Nested class definitions to simulate complex data
'''
class A:
def __init__(self, name, value):
self.name = name
self.value = value
def get_attr(self):
return self.name, self.value
def set_attr(self, n, v):
self.name = n
self.value = v
class B(A):
def __init__(self, name, value, status):
super(B, self).__init__(name, value)
self.status = status
def set_attr(self, n, v, s):
A.set_attr(self, n,v)
self.status = s
def get_attr(self):
print('\nName : {}\nValue : {}\nStatus : {}'.format(self.name, self.value, self.status))
Producer.py
from multiprocessing import shared_memory as sm
import time
import pickle as pkl
import pickletools as ptool
import sys
from class_defs import B
def main():
# Data Creation/Processing
obj1 = B('Sam Reagon', '2703', 'Active')
#print(sys.getsizeof(obj1))
obj1.set_attr('Ronald Reagon', '1023', 'INACTIVE')
obj1.get_attr()
###### real deal #########
# Create pickle string
byte_str = pkl.dumps(obj=obj1, protocol=pkl.HIGHEST_PROTOCOL, buffer_callback=None)
# compress the pickle
#byte_str_opt = ptool.optimize(byte_str)
byte_str_opt = bytearray(byte_str)
# place data on shared memory buffer
shm_a = sm.SharedMemory(name='datashare', create=True, size=len(byte_str_opt))#sys.getsizeof(obj1))
buffer = shm_a.buf
buffer[:] = byte_str_opt[:]
#print(shm_a.name) # the string to access the shared memory
#print(len(shm_a.buf[:]))
# Just an infinite loop to keep the producer running, like a server
# a better approach would be to explore use of shared memory manager
while(True):
time.sleep(60)
if __name__ == '__main__':
main()
Consumer.py
from multiprocessing import shared_memory as sm
import pickle as pkl
from class_defs import B # we need this so that while unpickling, the object structure is understood
def main():
shm_b = sm.SharedMemory(name='datashare')
byte_str = bytes(shm_b.buf[:]) # convert the shared_memory buffer to a bytes array
obj = pkl.loads(data=byte_str) # un-pickle the bytes array (as a data source)
print(obj.name, obj.value, obj.status) # get the values of the object attributes
if __name__ == '__main__':
main()
When the Producer.py is executed in one terminal, it will emit a string identifier (say, wnsm_86cd09d4) for the shared memory. Enter this string in the Consumer.py and execute it in another terminal.
Just run the Producer.py in one terminal and the Consumer.py on another terminal on the same machine.
I hope this is what you wanted!
You can take advantage of multiprocessing to run the simulations inside of subprocesses, and leverage the copy-on-write benefits of forking to unpickle/process the data only once at the start:
import multiprocessing
import pickle
# Need to use forking to get copy-on-write benefits!
mp = multiprocessing.get_context('fork')
# Load data once, in the parent process
data = pickle.load(open(DATA_ROOT + pickle_name, 'rb'))
def _run_simulation(_):
# Wrapper for `run_simulation` that takes one argument. The function passed
# into `multiprocessing.Pool.map` must take one argument.
run_simulation()
with mp.Pool() as pool:
pool.map(_run_simulation, range(num_simulations))
If you want to parameterize each simulation run, you can do so like so:
import multiprocessing
import pickle
# Need to use forking to get copy-on-write benefits!
mp = multiprocessing.get_context('fork')
# Load data once, in the parent process
data = pickle.load(open(DATA_ROOT + pickle_name, 'rb'))
with mp.Pool() as pool:
simulations = ('arg for simulation run', 'arg for another simulation run')
pool.map(run_simulation, simulations)
This way the run_simulation function will be passed in the values from the simulations tuple, which can allow for having each simulation run with different parameters, or even just assign each run a ID number of name for logging/saving purposes.
This whole approach relies on fork being available. For more information about using fork with Python's built-in multiprocessing library, see the docs about contexts and start methods. You may also want to consider using the forkserver multiprocessing context (by using mp = multiprocessing.get_context('fork')) for the reasons described in the docs.
If you don't want to run your simulations in parallel, this approach can be adapted for that. The key thing is that in order to only have to process the data once, you must call run_simulation within the process that processed the data, or one of its child processes.
If, for instance, you wanted to edit what run_simulation does, and then run it again at your command, you could do it with code resembling this:
main.py:
import multiprocessing
from multiprocessing.connection import Connection
import pickle
from data import load_data
# Load/process data in the parent process
load_data()
# Now child processes can access the data nearly instantaneously
# Need to use forking to get copy-on-write benefits!
mp = multiprocessing.get_context('fork') # Consider using 'forkserver' instead
# This is only ever run in child processes
def load_and_run_simulation(result_pipe: Connection) -> None:
# Import `run_simulation` here to allow it to change between runs
from simulation import run_simulation
# Ensure that simulation has not been imported in the parent process, as if
# so, it will be available in the child process just like the data!
try:
run_simulation()
except Exception as ex:
# Send the exception to the parent process
result_pipe.send(ex)
else:
# Send this because the parent is waiting for a response
result_pipe.send(None)
def run_simulation_in_child_process() -> None:
result_pipe_output, result_pipe_input = mp.Pipe(duplex=False)
proc = mp.Process(
target=load_and_run_simulation,
args=(result_pipe_input,)
)
print('Starting simulation')
proc.start()
try:
# The `recv` below will wait until the child process sends sometime, or
# will raise `EOFError` if the child process crashes suddenly without
# sending an exception (e.g. if a segfault occurs)
result = result_pipe_output.recv()
if isinstance(result, Exception):
raise result # raise exceptions from the child process
proc.join()
except KeyboardInterrupt:
print("Caught 'KeyboardInterrupt'; terminating simulation")
proc.terminate()
print('Simulation finished')
if __name__ == '__main__':
while True:
choice = input('\n'.join((
'What would you like to do?',
'1) Run simulation',
'2) Exit\n',
)))
if choice.strip() == '1':
run_simulation_in_child_process()
elif choice.strip() == '2':
exit()
else:
print(f'Invalid option: {choice!r}')
data.py:
from functools import lru_cache
# <obtain 'DATA_ROOT' and 'pickle_name' here>
#lru_cache
def load_data():
with open(DATA_ROOT + pickle_name, 'rb') as f:
return pickle.load(f)
simulation.py:
from data import load_data
# This call will complete almost instantaneously if `main.py` has been run
data = load_data()
def run_simulation():
# Run the simulation using the data, which will already be loaded if this
# is run from `main.py`.
# Anything printed here will appear in the output of the parent process.
# Exceptions raised here will be caught/handled by the parent process.
...
The three files detailed above should all be within the same directory, alongside an __init__.py file that can be empty. The main.py file can be renamed to whatever you'd like, and is the primary entry-point for this program. You can run simulation.py directly, but that will result in a long time spent loading/processing the data, which was the problem you ran into initially. While main.py is running, the file simulation.py can be edited, as it is reloaded every time you run the simulation from main.py.
For macOS users: forking on macOS can be a bit buggy, which is why Python defaults to using the spawn method for multiprocessing on macOS, but still supports fork and forkserver for it. If you're running into crashes or multiprocessing-related issues, try adding OBJC_DISABLE_INITIALIZE_FORK_SAFETY=YES to your environment. See https://stackoverflow.com/a/52230415/5946921 for more details.
As I understood:
something is needed to be loaded
it is needed to be loaded often, because file with code which uses this something is edited often
you don't want to wait until it will be loaded every time
Maybe such solution will be okay for you.
You can write script loader file in such way (tested on Python 3.8):
import importlib.util, traceback, sys, gc
# Example data
import pickle
something = pickle.loads(pickle.dumps([123]))
if __name__ == '__main__':
try:
mod_path = sys.argv[1]
except IndexError:
print('Usage: python3', sys.argv[0], 'PATH_TO_SCRIPT')
exit(1)
modules_before = list(sys.modules.keys())
argv = sys.argv[1:]
while True:
MOD_NAME = '__main__'
spec = importlib.util.spec_from_file_location(MOD_NAME, mod_path)
mod = importlib.util.module_from_spec(spec)
# Change to needed global name in the target module
mod.something = something
sys.modules[MOD_NAME] = mod
sys.argv = argv
try:
spec.loader.exec_module(mod)
except:
traceback.print_exc()
del mod, spec
modules_after = list(sys.modules.keys())
for k in modules_after:
if k not in modules_before:
del sys.modules[k]
gc.collect()
print('Press enter to re-run, CTRL-C to exit')
sys.stdin.readline()
Example of module:
# Change 1 to some different number when first script is running and press enter
something[0] += 1
print(something)
Should work. And should reduce the reload time of pickle close to zero 🌝
UPD
Add a possibility to accept script name with command line arguments
This is not exact answer to the question as the Q looks as pickle and SHM are required, but others went of the path, so I am going to share a trick of mine. It might help you. There are some fine solutions here using the pickle and SHM anyway. Regarding this I can offer only more of the same. Same pasta with slight sauce modifications.
Two tricks I employ when dealing with your situations are as follows.
First is to use sqlite3 instead of pickle. You can even easily develop a module for a drop-in replacement using sqlite. Nice thing is that data will be inserted and selected using native Python types, and you can define yourown with converter and adapter functions that would use serialization method of your choice to store complex objects. Can be a pickle or json or whatever.
What I do is to define a class with data passed in through *args and/or **kwargs of a constructor. It represents whatever obj model I need, then I pick-up rows from "select * from table;" of my database and let Python unwrap the data during the new object initialization. Loading big amount of data with datatype conversions, even the custom ones is suprisingly fast. sqlite will manage buffering and IO stuff for you and do it faster than pickle. The trick is construct your object to be filled and initiated as fast as possible. I either subclass dict() or use slots to speed up the thing.
sqlite3 comes with Python so that's a bonus too.
The other method of mine is to use a ZIP file and struct module.
You construct a ZIP file with multiple files within. E.g. for a pronunciation dictionary with more than 400000 words I'd like a dict() object. So I use one file, let say, lengths.dat in which I define a length of a key and a length of a value for each pair in binary format. Then I have a one file of words and one file of pronunciations all one after the other.
When I load from file, I read the lengths and use them to construct a dict() of words with their pronunciations from two other files. Indexing bytes() is fast, so, creating such a dictionary is very fast. You can even have it compressed if diskspace is a concern, but some speed loss is introduced then.
Both methods will take less place on a disk than the pickle would.
The second method will require you to read into RAM all the data you need, then you will be constructing the objects, which will take almost double of RAM that the data took, then you can discard the raw data, of course. But alltogether shouldn't require more than the pickle takes. As for RAM, the OS will manage almost anything using the virtual memory/SWAP if needed.
Oh, yeah, there is the third trick I use. When I have ZIP file constructed as mentioned above or anything else which requires additional deserialization while constructing an object, and number of such objects is great, then I introduce a lazy load. I.e. Let say we have a big file with serialized objects in it. You make the program load all the data and distribute it per object which you keep in list() or dict().
You write your classes in such a way that when the object is first asked for data it unpacks its raw data, deserializes and what not, removes the raw data from RAM then returns your result. So you will not be losing loading time until you actually need the data in question, which is much less noticeable for a user than 20 secs taking for a process to start.
I implemented the python-preloaded script, which can help you here. It will store the CPython state at an early stage after some modules are loaded, and then when you need it, you can restore from this state and load your normal Python script. Storing currently means that it will stay in memory, and restoring means that it does a fork on it, which is very fast. But these are implementation details of python-preloaded and should not matter to you.
So, to make it work for your use case:
Make a new module, data_preloaded.py or so, and in there, just this code:
preloaded_data = load_pickle(...)
Now run py-preloaded-bundle-fork-server.py data_preloaded -o python-data-preloaded.bin. This will create python-data-preloaded.bin, which can be used as a replacement for python.
I assume you have started python your_script.py before. So now run ./python-data-preloaded.bin your_script.py. Or also just python-data-preloaded.bin (no args). The first time, this will still be slow, i.e. take about 20 seconds. But now it is in memory.
Now run ./python-data-preloaded.bin your_script.py again. Now it should be extremely fast, i.e. a few milliseconds. And you can start it again and again and it will always be fast, until you restart your computer.
Using concurrent.futures.ProcessPoolExecutor I am trying to run the first piece of code to execute the function "Calculate_Forex_Data_Derivatives(data,gride_spacing)" in parallel. When calling the results, executor_list[i].result(), I get "BrokenProcessPool: A process in the process pool was terminated abruptly while the future was running or pending." I have tried running the code sending multiple calls of the function to the processing pool as well as running the code only sending one call to the processing pool, both resulting in the error.
I have also tested the structure of the code with a simpler piece of code (2nd code provided) with the same types of input for the call function and it works fine. The only thing different that I can see between the two pieces of code is the first code calls the function "FinDiff(axis,grid_spacing,derivative_order)" from the 'findiff' module. This function along with the "Calculate_Forex_Data_Derivatives(data,gride_spacing)" work perfectly on there own when running normally in series.
I am using Anaconda environment, Spyder editor, and Windows.
Any help would be appreciated.
#code that returns "BrokenProcessPool: A process in the process pool was terminated abruptly while the future was running or pending."
import pandas as pd
import numpy as np
from findiff import FinDiff
import multiprocessing
import concurrent.futures
def Calculate_Forex_Data_Derivatives(forex_data,dt): #function to run in parallel
try:
dClose_dt = FinDiff(0,dt,1)(forex_data)[-1]
except IndexError:
dClose_dt = np.nan
try:
d2Close_dt2 = FinDiff(0,dt,2)(forex_data)[-1]
except IndexError:
d2Close_dt2 = np.nan
try:
d3Close_dt3 = FinDiff(0,dt,3)(forex_data)[-1]
except IndexError:
d3Close_dt3 = np.nan
return dClose_dt, d2Close_dt2, d3Close_dt3
#input for function
#forex_data is pandas dataframe, forex_data['Close'].values is numpy array
#dt is numpy array
#input_1 and input_2 are each a list of numpy arrays
input_1 = []
input_2 = []
for forex_data_index,data_point in enumerate(forex_data['Close'].values[:1]):
input_1.append(forex_data['Close'].values[:forex_data_index+1])
input_2.append(dt[:forex_data_index+1])
def multi_processing():
executors_list = []
with concurrent.futures.ProcessPoolExecutor(max_workers=multiprocessing.cpu_count()) as executor:
for index in range(len(input_1)):
executors_list.append(executor.submit(Calculate_Forex_Data_Derivatives,input_1[index],input_2[index]))
return executors_list
if __name__ == '__main__':
print('calculating derivatives')
executors_list = multi_processing()
for output in executors_list
print(output.result()) #returns "BrokenProcessPool: A process in the process pool was terminated abruptly while the future was running or pending."
##############################################################
#simple example that runs fine
def function(x,y): #function to run in parallel
try:
asdf
except NameError:
a = (x*y)[0]
b = (x+y)[0]
return a,b
x=[np.array([0,1,2]),np.array([3,4,5])] #function inputs, list of numpy arrays
y=[np.array([6,7,8]),np.array([9,10,11])]
def multi_processing():
executors_list = []
with concurrent.futures.ProcessPoolExecutor(max_workers=multiprocessing.cpu_count()) as executor:
for index,_ in enumerate(x):
executors_list.append(executor.submit(function,x[index],y[index]))
return executors_list
if __name__ == '__main__':
executors_list = multi_processing()
for output in executors_list: #prints as expected
print(output.result()) #(0, 6)
#(27, 12)
I know three typical ways to break the Pipe of a ProcessPoolExecutor:
OS kill/termination
Your system runs into limits, most likely memory, and starts killing processes. As a fork on windows clones your memory content, this is not unlikely when working with large DataFrames.
How to identify
Check memory consumption in your task manager.
Unless your DataFrames occupy half of your memory, it should disappear with max_workers=1, this is not unambiguous however.
Self-Termination of the Worker
The Python instance of the subprocess terminates due to some error that does not raise a proper Exception. One example would be a segfault in an imported C-module.
How to identify
As your code runs properly without the PPE, the only scenario I can think of is if some module is not multiprocessing-safe. It then also has a chance to disappear with max_workers=1. It might also be possible to induce the Error in the main process by calling the function manually right after the workers are created (the line after the for-loop that calls executor.submit.
Otherwise it could be really hard to identify, but in my opinion it is the most unlikely case.
Exception in PPE Code
The subprocess side of the pipe (i.e. code handling the communication) may crash, which results in a proper Exception, that unfortunately can not be communicated to the master process.
How to identify
As the code is (hopefully) well tested, the prime suspect lies in the return data. It must be pickled and sent back via socket - both steps can crash. So you have to check:
is the return data picklable?
is the pickled object small enough to be sent (about 2GB)?
So you can either try to return some simple dummy-data instead, or check the two conditions explicitely:
if len(pickle.dumps((dClose_dt, d2Close_dt2, d3Close_dt3))) > 2 * 10 ** 9:
raise RuntimeError('return data can not be sent!')
In Python 3.7, this problem is fixed, and it sends back the Exception.
I found this in the official documents:
"The main module must be importable by worker subprocesses. This means that ProcessPoolExecutor will not work in the interactive interpreter. Calling Executor or Future methods from a callable submitted to a ProcessPoolExecutor will result in deadlock."
Have you ever tried this? The following works for me:
if __name__ == '__main__':
executors_list = multi_processing()
for output in executors_list:
print(output.result())
I apologise if this has already been asked, but I've read a heap of documentation and am still not sure how to do what I would like to do.
I would like to run a Python script over multiple cores simultaneously.
I have 1800 .h5 files in a directory, with names 'snaphots_s1.h5', 'snapshots_s2.h5' etc, each about 30MB in size. This Python script:
Reads in the h5py files one at a time from the directory.
Extracts and manipulates the data in the h5py file.
Creates plots of the extracted data.
Once this is done, the script then reads in the next h5py file from the directory and follows the same procedure. Hence, none of the processors need to communicate to any other whilst doing this work.
The script is as follows:
import h5py
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.colors as colors
import cmocean
import os
from mpi4py import MPI
de.logging_setup.rootlogger.setLevel('ERROR')
# Plot writes
count = 1
for filename in os.listdir('directory'): ### [PERF] Applied to ~ 1800 .h5 files
with h5py.File('directory/{}'.format(filename),'r') as file:
### Manipulate 'filename' data. ### [PERF] Each fileI ~ 0.03 TB in size
...
### Plot 'filename' data. ### [PERF] Some fileO is output here
...
count = count + 1
Ideally, I would like to use mpi4py to do this (for various reasons), though I am open to other options such as multiprocessing.Pool (which I couldn't actually get to work. I tried following the approach outlined here).
So, my question is: What commands do I need to put in the script to parallelise it using mpi4py? Or, if this option isn't possible, how else could I parallelise the script?
You should go with multiprocessing, and Javier example should work but I would like to break it down so you can understand the steps too.
In general, when working with pools you create a pool of processes that idle until you pass them some work. To ideal way to do it is to create a function that each process will execute separetly.
def worker(fn):
with h5py.File(fn, 'r') as f:
# process data..
return result
That simple. Each process will run this, and return the result to the parent process.
Now that you have the worker function that does the work, let's create the input data for it. It takes a filename, so we need a list of all files
full_fns = [os.path.join('directory', filename) for filename in
os.listdir('directory')]
Next initialize the process pool.
import multiprocessing as mp
pool = mp.Pool(4) # pass the amount of processes you want
results = pool.map(worker, full_fns)
# pool takes a worker function and input data
# you usually need to wait for all the subprocesses done their work before
using the data; so you don't work on partial data.
pool.join()
poo.close()
Now you can access your data through results.
for r in results:
print r
Let me know in comments how this worked out for you
Multiprocessing should not be more complicated than this:
def process_one_file(fn):
with h5py.File(fn, 'r') as f:
....
return is_successful
fns = [os.path.join('directory', fn) for fn in os.listdir('directory')]
pool = multiprocessing.Pool()
for fn, is_successful in zip(fns, pool.imap(process_one_file, fns)):
print(fn, "succedded?", is_successful)
You should be able to implement multiprocessing easily using the multiprocessing library.
from multiprocessing.dummy import Pool
def processData(files):
print files
...
return result
allFiles = glob.glob("<file path/file mask>")
pool = Pool(6) # for 6 threads for example
results = pool.map(processData, allFiles)
I have a python script, that needs to load a large file from disk to a variable. This takes a while. The script will be called many times from another application (still unknown), with different options and the stdout will be used. Is there any possibility to avoid reading the large file for each single call of the script?
I guess i could have one large script running in the background that holds the variable. But then, how can I call the script with different options and read the stdout from another application?
Make it a (web) microservice: formalize all different CLI arguments as HTTP endpoints and send requests to it from main application.
(I misunderstood the original question, but the first answer I wrote has a different solution, which might be useful to someone fitting that scenario, so I am keeping that one as is and proposing second solution.
)
For a single machine, OS provided pipes are the best solution for what you are looking.
Essentially you will create a forever running process in python which reads from pipe, and process the commands entering the pipe, and then prints to sysout.
Reference: http://kblin.blogspot.com/2012/05/playing-with-posix-pipes-in-python.html
From above mentioned source
Workload
In order to simulate my workload, I came up with the following simple script called pipetest.py that takes an output file name and then writes some text into that file.
#!/usr/bin/env python
import sys
def main():
pipename = sys.argv[1]
with open(pipename, 'w') as p:
p.write("Ceci n'est pas une pipe!\n")
if __name__ == "__main__":
main()
The Code
In my test, this "file" will be a FIFO created by my wrapper code. The implementation of the wrapper code is as follows, I will go over the code in detail further down this post:
#!/usr/bin/env python
import tempfile
import os
from os import path
import shutil
import subprocess
class TemporaryPipe(object):
def __init__(self, pipename="pipe"):
self.pipename = pipename
self.tempdir = None
def __enter__(self):
self.tempdir = tempfile.mkdtemp()
pipe_path = path.join(self.tempdir, self.pipename)
os.mkfifo(pipe_path)
return pipe_path
def __exit__(self, type, value, traceback):
if self.tempdir is not None:
shutil.rmtree(self.tempdir)
def call_helper():
with TemporaryPipe() as p:
script = "./pipetest.py"
subprocess.Popen(script + " " + p, shell=True)
with open(p, 'r') as r:
text = r.read()
return text.strip()
def main():
call_helper()
if __name__ == "__main__":
main()
Since you already can read the data into a variable, then you might consider memory mapping the file using mmap. This is safe if multiple processes are only reading it - to support a writer would require a locking protocol.
Assuming you are not familiar with memory mapped objects, I'll wager you use them every day - this is how the operating system loads and maintains executable files. Essentially your file becomes part of the paging system - although it does not have to be in any special format.
When you read a file into memory it is unlikely it is all loaded into RAM, it will be paged out when "real" RAM becomes over-subscribed. Often this paging is a considerable overhead. A memory mapped file is just your data "ready paged". There is no overhead in reading into memory (virtual memory, that is), it is there as soon as you map it .
When you try to access the data a page fault occurs and a subset (page) is loaded into RAM - all done by the operating system, the programmer is unaware of this.
While a file remains mapped it is connected to the paging system. Another process mapping the same file will access the same object, provided changes have not been made (See MAP_SHARED).
It needs a daemon to keep the memory mapped object current in kernel, but other than creating the object linked to the physical file, it does not need to do anything else - it can sleep or wait on a shutdown signal.
Other processes open the file (use os.open()) and map the object.
See the examples in the documentation, here and also Giving access to shared memory after child processes have already started
You can store the processed values in a file, and then read the values from that file in another script.
>>> import pickle as p
>>> mystr="foobar"
>>> p.dump(mystr,open('/tmp/t.txt','wb'))
>>> mystr2=p.load(open('/tmp/t.txt','rb'))
>>> mystr2
'foobar'
I have a python program that's been running for a while, and because of an unanticipated event, I'm now unsure that it will complete within a reasonable amount of time. The data it's collected so far, however, is valuable, and I would like to recover it if possible.
Here is the relevant code
from multiprocessing.dummy import Pool as ThreadPool
def pull_details(url):
#accesses a given URL
#returns some data which gets appended to the results list
pool = ThreadPool(25)
results = pool.map(pull_details, urls)
pool.close()
pool.join()
So I either need to access the data that is currently in results or somehow change the source of the code (or somehow manually change the program's control) to kill the loop so it continues to the later part of the program in which the data is exported (not sure if the second way is possible).
It seems as though the first option is also quite tricky, but luckily the IDE (Spyder) I'm using indicates the value of what I assume is the location of the list in the machine's memory (0xB73EDECCL).
Is it possible to create a C program (or another python program) to access this location in memory and read what's there?
Can't you use some sort of mechanism to exchange data between the two processes, like queues or pipes.
something like below:
from multiprocessing import Queue
from multiprocessing.dummy import Pool as ThreadPool
def pull_details(args=None):
q.put([my useful data])
q = Queue()
pool = ThreadPool(25)
results = pool.map(pull_details(args=q), urls)
while not done:
results = q.get()
pool.close()
pool.join()