Related
I'm trying to install python3 on RHEL using the following steps:
yum search python3
Which returned No matches found for: python3
Followed by:
yum search python
None of the search results contained python3. What should I try next?
Installing from RPM is generally better, because:
you can install and uninstall (properly) python3.
the installation time is way faster. If you work in a cloud environment with multiple VMs, compiling python3 on each VMs is not acceptable.
Solution 1: Red Hat & EPEL repositories
Red Hat has added through the EPEL repository:
Python 3.4 for CentOS 6
Python 3.6 for CentOS 7
[EPEL] How to install Python 3.4 on CentOS 6
sudo yum install -y epel-release
sudo yum install -y python34
# Install pip3
sudo yum install -y python34-setuptools # install easy_install-3.4
sudo easy_install-3.4 pip
You can create your virtualenv using pyvenv:
pyvenv /tmp/foo
[EPEL] How to install Python 3.6 on CentOS 7
With CentOS7, pip3.6 is provided as a package :)
sudo yum install -y epel-release
sudo yum install -y python36 python36-pip
You can create your virtualenv using pyvenv:
python3.6 -m venv /tmp/foo
If you use the pyvenv script, you'll get a WARNING:
$ pyvenv-3.6 /tmp/foo
WARNING: the pyenv script is deprecated in favour of `python3.6 -m venv`
Solution 2: IUS Community repositories
The IUS Community provides some up-to-date packages for RHEL & CentOS. The guys behind are from Rackspace, so I think that they are quite trustworthy...
https://ius.io/
Check the right repo for you here:
https://ius.io/setup
[IUS] How to install Python 3.6 on CentOS 6
sudo yum install -y https://repo.ius.io/ius-release-el6.rpm
sudo yum install -y python36u python36u-pip
You can create your virtualenv using pyvenv:
python3.6 -m venv /tmp/foo
[IUS] How to install Python 3.6 on CentOS 7
sudo yum install -y https://repo.ius.io/ius-release-el7.rpm
sudo yum install -y python36u python36u-pip
You can create your virtualenv using pyvenv:
python3.6 -m venv /tmp/foo
It is easy to install python manually (i.e. build from source):
Download (there may be newer releases on Python.org):
$ wget https://www.python.org/ftp/python/3.4.3/Python-3.4.3.tar.xz
Unzip
$ tar xf Python-3.*
$ cd Python-3.*
Prepare compilation
$ ./configure
Build
$ make
Install
$ make install
OR if you don't want to overwrite the python executable (safer, at least on some distros yum needs python to be 2.x, such as for RHEL6) - you can install python3.* as a concurrent instance to the system default with an altinstall:
$ make altinstall
Now if you want an alternative installation directory, you can pass --prefix to the configurecommand.
Example: for 'installing' Python in /opt/local, just add --prefix=/opt/local.
After the make install step: In order to use your new Python installation, it could be, that you still have to add the [prefix]/bin to the $PATH and [prefix]/lib to the $LD_LIBRARY_PATH (depending of the --prefix you passed)
In addition to gecco's answer I would change step 3 from:
./configure
to:
./configure --prefix=/opt/python3
Then after installation you could also:
# ln -s /opt/python3/bin/python3 /usr/bin/python3
It is to ensure that installation will not conflict with python installed with yum.
See explanation I have found on Internet:
http://www.hosting.com/support/linux/installing-python-3-on-centosredhat-5x-from-source
Along with Python 2.7 and 3.3, Red Hat Software Collections now includes Python 3.4 - all work on both RHEL 6 and 7.
RHSCL 2.0 docs are at https://access.redhat.com/documentation/en-US/Red_Hat_Software_Collections/
Plus lot of articles at developerblog.redhat.com.
<opinion> Using the SCL yum repos may be better than other yum repos because the RPMs are developed/tested by Redhat (i.e. first-party RPMs instead of third-party). </opinion>
edit
Follow these instructions to install Python 3.4 on RHEL 6/7 or CentOS 6/7:
# 1. Install the Software Collections tools:
yum install scl-utils
# 2. Download a package with repository for your system.
# (See the Yum Repositories on external link. For RHEL/CentOS 6:)
wget https://www.softwarecollections.org/en/scls/rhscl/rh-python34/epel-6-x86_64/download/rhscl-rh-python34-epel-6-x86_64.noarch.rpm
# or for RHEL/CentOS 7
wget https://www.softwarecollections.org/en/scls/rhscl/rh-python34/epel-7-x86_64/download/rhscl-rh-python34-epel-7-x86_64.noarch.rpm
# 3. Install the repo package (on RHEL you will need to enable optional channel first):
yum install rhscl-rh-python34-*.noarch.rpm
# 4. Install the collection:
yum install rh-python34
# 5. Start using software collections:
scl enable rh-python34 bash
UPDATE 2021-08-16:
rhel and centos version 7 are now on python 3.6 by default i believe
the SCL yum repo has python version 3.8 as of the date of this writing 2021-08-16 (despite the question still referencing the older python 3.4 version)
Use the SCL repos.
sudo sh -c 'wget -qO- http://people.redhat.com/bkabrda/scl_python33.repo >> /etc/yum.repos.d/scl.repo'
sudo yum install python33
scl enable python27
(This last command will have to be run each time you want to use python27 rather than the system default.)
Python3 was recently added to EPEL7 as Python34.
There is ongoing (currently) effort to make packaging guidelines about how to package things for Python3 in EPEL7.
See https://bugzilla.redhat.com/show_bug.cgi?id=1219411
and https://lists.fedoraproject.org/pipermail/python-devel/2015-July/000721.html
You can download a source RPMs and binary RPMs for RHEL6 / CentOS6 from
here
This is a backport from the newest Fedora development
source rpm to RHEL6 / CentOS6
If you are on RHEL and want a Red Hat supported Python, use Red Hat Software collections (RHSCL). The EPEL and IUS packages are not supported by Red Hat. Also many of the answers above point to the CentOS software collections. While you can install those, they aren't the Red Hat supported packages for RHEL.
Also, the top voted answer gives bad advice - On RHEL you do not want to change /usr/bin/python, /usr/bin/python2 because you will likely break yum and other RHEL admin tools. Take a look at /bin/yum, it is a Python script that starts with #!/usr/bin/python. If you compile Python from source, do not do a make install as root. That will overwrite /usr/bin/python. If you break yum it can be difficult to restore your system.
For more info, see How to install Python 3, pip, venv, virtualenv, and pipenv on RHEL on developers.redhat.com. It covers installing and using Python 3 from RHSCL, using Python Virtual Environments, and a number of tips for working with software collections and working with Python on RHEL.
In a nutshell, to install Python 3.6 via Red Hat Software Collections:
$ su -
# subscription-manager repos --enable rhel-7-server-optional-rpms \
--enable rhel-server-rhscl-7-rpms
# yum -y install #development
# yum -y install rh-python36
# yum -y install rh-python36-numpy \
rh-python36-scipy \
rh-python36-python-tools \
rh-python36-python-six
To use a software collection you have to enable it:
scl enable rh-python36 bash
However if you want Python 3 permanently enabled, you can add the following to your ~/.bashrc and then log out and back in again. Now Python 3 is permanently in your path.
# Add RHSCL Python 3 to my login environment
source scl_source enable rh-python36
Note: once you do that, typing python now gives you Python 3.6 instead of Python 2.7.
See the above article for all of this and a lot more detail.
I see all the answers as either asking to compile python3 from code or installing the binary RPM package. Here is another answer to enable EPEL (Extra Packages for Enterprise Linux) and then install python using yum. Steps for RHEL 7.5 (Maipo)
yum install wget –y
wget https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/e/epel-release-7-XX.noarch.rpm # Verify actual RPM name by browsing dir over browser
rpm –ivh epel-*.rpm
yum install python36
Also see link
I was having the same issue using the python 2.7. Follow the below steps to upgrade successfully to 3.6.
You can also try this one-
See before upgrading version is 2.x
python --version
Python 2.7.5
Use below command to upgrade your python to 3.x version-
yum install python3x
replace x with the version number you want.
i.e. for installing python 3.6 execute
yum install python36
After that if you want to set this python for your default version then in bashrc file add
vi ~/.bashrc
alias python='python3.6'
execute bash command to apply the settings
bash
Now you can see the version below
python --version
Python 3.6.3
Here are the steps i followed to install Python3:
yum install wget
wget https://www.python.org/ftp/python/3.6.0/Python-3.6.0.tar.xz
sudo tar xvf Python-3.*
cd Python-3.*
sudo ./configure --prefix=/opt/python3
sudo make
sudo make install
sudo ln -s /opt/python3/bin/python3 /usr/bin/python3
$ /usr/bin/python3
Python 3.6.0
Three steps using Python 3.5 by Software Collections:
sudo yum install centos-release-scl
sudo yum install rh-python35
scl enable rh-python35 bash
Note that sudo is not needed for the last command. Now we can see that python 3 is the default for the current shell:
python --version
Python 3.5.1
Simply skip the last command if you'd rather have Python 2 as the default for the current shell.
Now let's say that your Python 3 scripts give you an error like /usr/bin/env: python3: No such file or directory. That's because the installation is usually done to an unusual path:
/opt/rh/rh-python35/root/bin/python3
The above would normally be a symlink. If you want python3 to be automatically added to the $PATH for all users on startup, one way to do this is adding a file like:
sudo vim /etc/profile.d/rh-python35.sh
Which would have something like:
#!/bin/bash
PATH=$PATH:/opt/rh/rh-python35/root/bin/
And now after a reboot, if we do
python3 --version
It should just work. One exception would be an auto-generated user like "jenkins" in a Jenkins server which doesn't have a shell. In that case, manually adding the path to $PATH in scripts would be one way to go.
Finally, if you're using sudo pip3 to install packages, but it tells you that pip3 cannot be found, it could be that you have a secure_path in /etc/sudoers. Checking with sudo visudo should confirm that. To temporarily use the standard PATH when running commands you can do, for example:
sudo env "PATH=$PATH" pip3 --version
See this question for more details.
NOTE: There is a newer Python 3.6 by Software Collections, but I wouldn't recommend it at this time, because I had major headaches trying to install Pycurl. For Python 3.5 that isn't an issue because I just did sudo yum install sclo-python35-python-pycurl which worked out of the box.
If you want official RHEL packages you can use RHSCL (Red Hat Software Collections)
More details:
Guide to Python 3.3 in RHSCL 1.1
How to access and download Red Hat Software Collections (RHSCL) and/or Red Hat Developer Toolset (DTS)?
You have to have access to Red Hat Customer Portal to read full articles.
yum install python34.x86_64 works if you have epel-release installed, which this answer explains how to, and I confirmed it worked on RHEL 7.3
$ cat /etc/*-release
NAME="Red Hat Enterprise Linux Server"
VERSION="7.3 (Maipo)
$ type python3
python3 is hashed (/usr/bin/python3)
For RHEL on Amazon Linux, using python3 I had to do :
sudo yum install python34-devel
Full working 36 when SCL is not available (based on Joys input)
yum install wget –y
wget https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/e/epel-release-7-11.noarch.rpm
rpm –ivh epel-*.rpm
yum install python36
sudo yum install python34-setuptools
sudo mkdir /usr/local/lib/python3.6
sudo mkdir /usr/local/lib/python3.6/site-packages
sudo easy_install-3.6 pip
Finally activate the environment...
pyvenv-3.6 py3
source py3/bin/activate
Then python3
You can install miniconda (https://conda.io/miniconda.html). That's a bit more than just python 3.7 but the installation is very straightforward and simple.
curl https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh -O
sudo yum install bzip2
bash Miniconda3-latest-Linux-x86_64.sh
You'll have to accept the license agreement and choose some options in interactive mode (accept the defaults).
I believe it can be also installed silently somehow.
For those working on AWS EC2 RHEL 7.5, (use sudo) enable required repos
yum-config-manager --enable rhui-REGION-rhel-server-optional
yum-config-manager --enable rhui-REGION-rhel-server-rhscl
Install Python 3.6
yum install rh-python36
Install other dependencies
yum install rh-python36-numpy rh-python36-scipy rh-python36-python-tools rh-python36-python-six
As of RHEL 8, you can install python3 directly from the official repositories:
$ podman run --rm -ti ubi8 bash
[root#453fc5c55104 /]# yum install python3
Updating Subscription Management repositories.
Unable to read consumer identity
Subscription Manager is operating in container mode.
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
...
Installed:
platform-python-pip-9.0.3-16.el8.noarch
python3-pip-9.0.3-16.el8.noarch
python3-setuptools-39.2.0-5.el8.noarch
python36-3.6.8-2.module+el8.1.0+3334+5cb623d7.x86_64
Complete!
You can even get python 3.8:
[root#453fc5c55104 /]# yum install python38
Installed:
python38-3.8.0-6.module+el8.2.0+5978+503155c0.x86_64
python38-libs-3.8.0-6.module+el8.2.0+5978+503155c0.x86_64
python38-pip-19.2.3-5.module+el8.2.0+5979+f9f0b1d2.noarch
python38-pip-wheel-19.2.3-5.module+el8.2.0+5979+f9f0b1d2.noarch
python38-setuptools-41.6.0-4.module+el8.2.0+5978+503155c0.noarch
python38-setuptools-wheel-41.6.0-4.module+el8.2.0+5978+503155c0.noarch
Complete!
I have Ubuntu 18.04. I want to upgrade to python 3.x
When I do:
python --version
I get:
Python 2.7.17
But then I run:
sudo apt-get install python3
it says:
python3 is already the newest version (3.6.7-1~18.04).
I guess this means that I have more than one version of python on my laptop? What's the best way for me to clean this up? Should I delete one? I made a bit of a mess installing / uninstalling anaconda / miniconda at various points in my life, and so that has probably not helped.
I just want to have a clean install of python 3, and then I will reinstall miniconda after.
To run Python 3 instead of Python 2 type:
python3
If you want Python 3 to run by default you can add the following to the aliases section of your .bashrc:
# some more ls aliases
alias python='python3'
To update Python3:
sudo apt upgrade python3
When I try to install, it says that 2.7 is already installed. I want Python 3. How to install that?
I tried using python3, cannot find package:
Python 3 is a different package:
sudo yum install python3
Check your RHEL release version using
$lsb_release -a
Then depending on your OS version follow answers in Installing Python 3 on RHEL for installation
Here is the one command to install python3 on Amazon linux 2:
$sudo yum install python3 -y
$python3 --version
Python 3.7.6
I have fresh ubuntu 16.04 setup for production.
Initially if when i type
python --version gives me python 2.7 and python3 --version gives me python 3.5
but i want python points to python3 by default, so in my ~/.bashrc
alias python=python3 and source ~/.bashrc,
After that i install pip using sudo apt-get install python-pip and when i type pip --version it prints pip 8.1.1 from /usr/lib/python2.7/dist-packages (python 2.7) instead that i want packages to be installed into and get from /usr/local/lib/python3.5/dist-packages.
I have django application which is written with python3 compatible code.
Update: I want to install other packages which have to load from python3 dist-packages not just pip. I don't want to remove python 2.7 from ubuntu it will break other programs, i thought alias python=python3 would install packages into python3.5 dist-packages as well.
You need to use pip3 as the command.
pip3 install coolModule
Be sure to add to your bash profile.
alias pip3="python3 -m pip"
I'm trying to install python3 on RHEL using the following steps:
yum search python3
Which returned No matches found for: python3
Followed by:
yum search python
None of the search results contained python3. What should I try next?
Installing from RPM is generally better, because:
you can install and uninstall (properly) python3.
the installation time is way faster. If you work in a cloud environment with multiple VMs, compiling python3 on each VMs is not acceptable.
Solution 1: Red Hat & EPEL repositories
Red Hat has added through the EPEL repository:
Python 3.4 for CentOS 6
Python 3.6 for CentOS 7
[EPEL] How to install Python 3.4 on CentOS 6
sudo yum install -y epel-release
sudo yum install -y python34
# Install pip3
sudo yum install -y python34-setuptools # install easy_install-3.4
sudo easy_install-3.4 pip
You can create your virtualenv using pyvenv:
pyvenv /tmp/foo
[EPEL] How to install Python 3.6 on CentOS 7
With CentOS7, pip3.6 is provided as a package :)
sudo yum install -y epel-release
sudo yum install -y python36 python36-pip
You can create your virtualenv using pyvenv:
python3.6 -m venv /tmp/foo
If you use the pyvenv script, you'll get a WARNING:
$ pyvenv-3.6 /tmp/foo
WARNING: the pyenv script is deprecated in favour of `python3.6 -m venv`
Solution 2: IUS Community repositories
The IUS Community provides some up-to-date packages for RHEL & CentOS. The guys behind are from Rackspace, so I think that they are quite trustworthy...
https://ius.io/
Check the right repo for you here:
https://ius.io/setup
[IUS] How to install Python 3.6 on CentOS 6
sudo yum install -y https://repo.ius.io/ius-release-el6.rpm
sudo yum install -y python36u python36u-pip
You can create your virtualenv using pyvenv:
python3.6 -m venv /tmp/foo
[IUS] How to install Python 3.6 on CentOS 7
sudo yum install -y https://repo.ius.io/ius-release-el7.rpm
sudo yum install -y python36u python36u-pip
You can create your virtualenv using pyvenv:
python3.6 -m venv /tmp/foo
It is easy to install python manually (i.e. build from source):
Download (there may be newer releases on Python.org):
$ wget https://www.python.org/ftp/python/3.4.3/Python-3.4.3.tar.xz
Unzip
$ tar xf Python-3.*
$ cd Python-3.*
Prepare compilation
$ ./configure
Build
$ make
Install
$ make install
OR if you don't want to overwrite the python executable (safer, at least on some distros yum needs python to be 2.x, such as for RHEL6) - you can install python3.* as a concurrent instance to the system default with an altinstall:
$ make altinstall
Now if you want an alternative installation directory, you can pass --prefix to the configurecommand.
Example: for 'installing' Python in /opt/local, just add --prefix=/opt/local.
After the make install step: In order to use your new Python installation, it could be, that you still have to add the [prefix]/bin to the $PATH and [prefix]/lib to the $LD_LIBRARY_PATH (depending of the --prefix you passed)
In addition to gecco's answer I would change step 3 from:
./configure
to:
./configure --prefix=/opt/python3
Then after installation you could also:
# ln -s /opt/python3/bin/python3 /usr/bin/python3
It is to ensure that installation will not conflict with python installed with yum.
See explanation I have found on Internet:
http://www.hosting.com/support/linux/installing-python-3-on-centosredhat-5x-from-source
Along with Python 2.7 and 3.3, Red Hat Software Collections now includes Python 3.4 - all work on both RHEL 6 and 7.
RHSCL 2.0 docs are at https://access.redhat.com/documentation/en-US/Red_Hat_Software_Collections/
Plus lot of articles at developerblog.redhat.com.
<opinion> Using the SCL yum repos may be better than other yum repos because the RPMs are developed/tested by Redhat (i.e. first-party RPMs instead of third-party). </opinion>
edit
Follow these instructions to install Python 3.4 on RHEL 6/7 or CentOS 6/7:
# 1. Install the Software Collections tools:
yum install scl-utils
# 2. Download a package with repository for your system.
# (See the Yum Repositories on external link. For RHEL/CentOS 6:)
wget https://www.softwarecollections.org/en/scls/rhscl/rh-python34/epel-6-x86_64/download/rhscl-rh-python34-epel-6-x86_64.noarch.rpm
# or for RHEL/CentOS 7
wget https://www.softwarecollections.org/en/scls/rhscl/rh-python34/epel-7-x86_64/download/rhscl-rh-python34-epel-7-x86_64.noarch.rpm
# 3. Install the repo package (on RHEL you will need to enable optional channel first):
yum install rhscl-rh-python34-*.noarch.rpm
# 4. Install the collection:
yum install rh-python34
# 5. Start using software collections:
scl enable rh-python34 bash
UPDATE 2021-08-16:
rhel and centos version 7 are now on python 3.6 by default i believe
the SCL yum repo has python version 3.8 as of the date of this writing 2021-08-16 (despite the question still referencing the older python 3.4 version)
Use the SCL repos.
sudo sh -c 'wget -qO- http://people.redhat.com/bkabrda/scl_python33.repo >> /etc/yum.repos.d/scl.repo'
sudo yum install python33
scl enable python27
(This last command will have to be run each time you want to use python27 rather than the system default.)
Python3 was recently added to EPEL7 as Python34.
There is ongoing (currently) effort to make packaging guidelines about how to package things for Python3 in EPEL7.
See https://bugzilla.redhat.com/show_bug.cgi?id=1219411
and https://lists.fedoraproject.org/pipermail/python-devel/2015-July/000721.html
You can download a source RPMs and binary RPMs for RHEL6 / CentOS6 from
here
This is a backport from the newest Fedora development
source rpm to RHEL6 / CentOS6
If you are on RHEL and want a Red Hat supported Python, use Red Hat Software collections (RHSCL). The EPEL and IUS packages are not supported by Red Hat. Also many of the answers above point to the CentOS software collections. While you can install those, they aren't the Red Hat supported packages for RHEL.
Also, the top voted answer gives bad advice - On RHEL you do not want to change /usr/bin/python, /usr/bin/python2 because you will likely break yum and other RHEL admin tools. Take a look at /bin/yum, it is a Python script that starts with #!/usr/bin/python. If you compile Python from source, do not do a make install as root. That will overwrite /usr/bin/python. If you break yum it can be difficult to restore your system.
For more info, see How to install Python 3, pip, venv, virtualenv, and pipenv on RHEL on developers.redhat.com. It covers installing and using Python 3 from RHSCL, using Python Virtual Environments, and a number of tips for working with software collections and working with Python on RHEL.
In a nutshell, to install Python 3.6 via Red Hat Software Collections:
$ su -
# subscription-manager repos --enable rhel-7-server-optional-rpms \
--enable rhel-server-rhscl-7-rpms
# yum -y install #development
# yum -y install rh-python36
# yum -y install rh-python36-numpy \
rh-python36-scipy \
rh-python36-python-tools \
rh-python36-python-six
To use a software collection you have to enable it:
scl enable rh-python36 bash
However if you want Python 3 permanently enabled, you can add the following to your ~/.bashrc and then log out and back in again. Now Python 3 is permanently in your path.
# Add RHSCL Python 3 to my login environment
source scl_source enable rh-python36
Note: once you do that, typing python now gives you Python 3.6 instead of Python 2.7.
See the above article for all of this and a lot more detail.
I see all the answers as either asking to compile python3 from code or installing the binary RPM package. Here is another answer to enable EPEL (Extra Packages for Enterprise Linux) and then install python using yum. Steps for RHEL 7.5 (Maipo)
yum install wget –y
wget https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/e/epel-release-7-XX.noarch.rpm # Verify actual RPM name by browsing dir over browser
rpm –ivh epel-*.rpm
yum install python36
Also see link
I was having the same issue using the python 2.7. Follow the below steps to upgrade successfully to 3.6.
You can also try this one-
See before upgrading version is 2.x
python --version
Python 2.7.5
Use below command to upgrade your python to 3.x version-
yum install python3x
replace x with the version number you want.
i.e. for installing python 3.6 execute
yum install python36
After that if you want to set this python for your default version then in bashrc file add
vi ~/.bashrc
alias python='python3.6'
execute bash command to apply the settings
bash
Now you can see the version below
python --version
Python 3.6.3
Here are the steps i followed to install Python3:
yum install wget
wget https://www.python.org/ftp/python/3.6.0/Python-3.6.0.tar.xz
sudo tar xvf Python-3.*
cd Python-3.*
sudo ./configure --prefix=/opt/python3
sudo make
sudo make install
sudo ln -s /opt/python3/bin/python3 /usr/bin/python3
$ /usr/bin/python3
Python 3.6.0
Three steps using Python 3.5 by Software Collections:
sudo yum install centos-release-scl
sudo yum install rh-python35
scl enable rh-python35 bash
Note that sudo is not needed for the last command. Now we can see that python 3 is the default for the current shell:
python --version
Python 3.5.1
Simply skip the last command if you'd rather have Python 2 as the default for the current shell.
Now let's say that your Python 3 scripts give you an error like /usr/bin/env: python3: No such file or directory. That's because the installation is usually done to an unusual path:
/opt/rh/rh-python35/root/bin/python3
The above would normally be a symlink. If you want python3 to be automatically added to the $PATH for all users on startup, one way to do this is adding a file like:
sudo vim /etc/profile.d/rh-python35.sh
Which would have something like:
#!/bin/bash
PATH=$PATH:/opt/rh/rh-python35/root/bin/
And now after a reboot, if we do
python3 --version
It should just work. One exception would be an auto-generated user like "jenkins" in a Jenkins server which doesn't have a shell. In that case, manually adding the path to $PATH in scripts would be one way to go.
Finally, if you're using sudo pip3 to install packages, but it tells you that pip3 cannot be found, it could be that you have a secure_path in /etc/sudoers. Checking with sudo visudo should confirm that. To temporarily use the standard PATH when running commands you can do, for example:
sudo env "PATH=$PATH" pip3 --version
See this question for more details.
NOTE: There is a newer Python 3.6 by Software Collections, but I wouldn't recommend it at this time, because I had major headaches trying to install Pycurl. For Python 3.5 that isn't an issue because I just did sudo yum install sclo-python35-python-pycurl which worked out of the box.
If you want official RHEL packages you can use RHSCL (Red Hat Software Collections)
More details:
Guide to Python 3.3 in RHSCL 1.1
How to access and download Red Hat Software Collections (RHSCL) and/or Red Hat Developer Toolset (DTS)?
You have to have access to Red Hat Customer Portal to read full articles.
yum install python34.x86_64 works if you have epel-release installed, which this answer explains how to, and I confirmed it worked on RHEL 7.3
$ cat /etc/*-release
NAME="Red Hat Enterprise Linux Server"
VERSION="7.3 (Maipo)
$ type python3
python3 is hashed (/usr/bin/python3)
For RHEL on Amazon Linux, using python3 I had to do :
sudo yum install python34-devel
Full working 36 when SCL is not available (based on Joys input)
yum install wget –y
wget https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/e/epel-release-7-11.noarch.rpm
rpm –ivh epel-*.rpm
yum install python36
sudo yum install python34-setuptools
sudo mkdir /usr/local/lib/python3.6
sudo mkdir /usr/local/lib/python3.6/site-packages
sudo easy_install-3.6 pip
Finally activate the environment...
pyvenv-3.6 py3
source py3/bin/activate
Then python3
You can install miniconda (https://conda.io/miniconda.html). That's a bit more than just python 3.7 but the installation is very straightforward and simple.
curl https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh -O
sudo yum install bzip2
bash Miniconda3-latest-Linux-x86_64.sh
You'll have to accept the license agreement and choose some options in interactive mode (accept the defaults).
I believe it can be also installed silently somehow.
For those working on AWS EC2 RHEL 7.5, (use sudo) enable required repos
yum-config-manager --enable rhui-REGION-rhel-server-optional
yum-config-manager --enable rhui-REGION-rhel-server-rhscl
Install Python 3.6
yum install rh-python36
Install other dependencies
yum install rh-python36-numpy rh-python36-scipy rh-python36-python-tools rh-python36-python-six
As of RHEL 8, you can install python3 directly from the official repositories:
$ podman run --rm -ti ubi8 bash
[root#453fc5c55104 /]# yum install python3
Updating Subscription Management repositories.
Unable to read consumer identity
Subscription Manager is operating in container mode.
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
...
Installed:
platform-python-pip-9.0.3-16.el8.noarch
python3-pip-9.0.3-16.el8.noarch
python3-setuptools-39.2.0-5.el8.noarch
python36-3.6.8-2.module+el8.1.0+3334+5cb623d7.x86_64
Complete!
You can even get python 3.8:
[root#453fc5c55104 /]# yum install python38
Installed:
python38-3.8.0-6.module+el8.2.0+5978+503155c0.x86_64
python38-libs-3.8.0-6.module+el8.2.0+5978+503155c0.x86_64
python38-pip-19.2.3-5.module+el8.2.0+5979+f9f0b1d2.noarch
python38-pip-wheel-19.2.3-5.module+el8.2.0+5979+f9f0b1d2.noarch
python38-setuptools-41.6.0-4.module+el8.2.0+5978+503155c0.noarch
python38-setuptools-wheel-41.6.0-4.module+el8.2.0+5978+503155c0.noarch
Complete!