Is it possible to run ipython with some packages already imported?
almost every time when I run ipython I do import numpy as np, is it possible to automate this process? i.e. just after I run ipython I want to be able to write something like np.array([0,1]). Is it possible?
In the case of Mac add a script like load_numpy.py under ~/.ipython/profile_default/startup/ directory and add the import statements you need to that script. Every time you run ipython, all the scripts in the startup directory will be executed first and so the imports will be there. in case of Ubuntu add the file to ~/.config/ipython/profile_default/startup/
Related
My use case is I want to initialize some functions in a file and then start up IPython with those functions defined. Is there a way to do something like this?
ipython --run_script=myscript.py
In recent versions of IPython, you do need to add the -i option to get into the interactive environment afterwards. Without the -i it just runs the code in myfile.py and returns to the prompt.
ipython -i myfile.py
Per the docs, it's trivial:
You start IPython with the command:
$ ipython [options] files
If invoked with no options, it
executes all the files listed in
sequence and drops you into the
interpreter while still acknowledging
any options you may have set in your
ipythonrc file. This behavior is
different from standard Python, which
when called as python -i will only
execute one file and ignore your
configuration setup.
So, just use ipython myfile.py... and there you are!-)
You can use IPython profiles to define startup scripts that will run every time you start IPython. A full description of profiles, is given here. You can create multiple profiles with different startup files.
Assuming you only need one profile, and always want the same startup files every time you start IPython, you can simply modify the default profile. To do this, first find out where your IPython configuration directory is in an ipython session.:
In [1]: import IPython
In [2]: IPython.paths.get_ipython_dir() # As of IPython v4.0
In [3]: print(ipython_config_dir)
/home/johndoe/.config/ipython
For this example, I am using Ubuntu Linux, and the configuration directory is in /home/johndoe/.config/ipython, where johndoe is the username.
The default_profile is in the profile_default subdirectory. Put any starting scripts in profile_default/startup. In the example here, the full path would be /home/johndoe/.config/ipython/profile_default/startup.
Nowadays, you can use the startup folder of IPython, which is located in your home directory (C:\users\[username]\.ipython on Windows). Go into the default profile and you'll see a startup folder with a README file. Just put any Python scripts in there, or if you want IPython commands, put them in a file with an .ipy extension.
You seem to be looking for IPython's %run magic command.
By typing in IPython:
%run hello_world.py
you'll run the hello.py program saved in your home directory. The functions and variables defined in that script will be accessible to you too.
The following is for the case when you want your startup scripts to automatically be run whenever you use IPython (instead of having a script that you must specify each time you run IPython).
For recent versions (i.e., 5.1.0) of IPython, place one or more python scripts you wish to have executed in the IPYTHON_CONFIG_DIR/profile_PROFILENAME/startup folder.
On Linux, for example, you could put your Python startup code into a file named ~/.ipython/profile_default/startup/10-mystartupstuff.py if you want it to run when no IPython profile is specified.
Information on creating and using IPython profiles is available here.
Update to Caleb's answer for Python 3.5 in Ubuntu 14.04 (Trusty Tahr): I made this answer self-contained by copying relevant parts of Caleb's answer.
You can use IPython profiles to define startup scripts that will run every time you start IPython. A full description of profiles, is given here. You can create multiple profiles with different startup files.
Assuming you only need one profile, and always want the same startup files every time you start IPython, you can simply modify the default profile. To do this, first find out where your IPython configuration directory is in an IPython session:
Input:
import IPython
ipython_config_dir = IPython.paths.get_ipython_dir()
print(ipython_cofig_dir)
Output:
/home/johndoe/.ipython
For this example, johndoe is the username.
Inside the /.ipython folder, the default_profile is in the profile_default subdirectory. Put any starting scripts in profile_default/startup. In the example here, the full path would be
/home/johndoe/.ipython/profile_default/startup
I have a Main script in Spyder that calls several functions contained in 6 different scripts (.py). I had to this way because the scripts are also used in different projects.
Currently, I have to run each script (containing several functions each) separately by hand, which is tiring, by clicking in the "green triangle" before launching the Main Script so that the functions contained in each script are stored in the working environment.
My question is: Would it be possible to automatically run each script directly from the Main Script and not running one after the another by hand?
Try
from filename import *
instead of
import filename
No .py extension in the import.
When you execute an import statement, the source file being imported is executed. So, for example, if you have thing.py and you execute import thing, all the code in thing.py will be run.
Also, as noted in a comment by Sven Krüger: you can use runpy.run_path, which I think is overall a better solution than my original suggestion.
I am fairly new to programming in python. I installed anaconda and am running iPython (the Jupyter qtconsole) v.4.3.0 and python v.3.6 on a Mac. Currently, I am trying to import a module with functions located in my home directory.
I have looked at stackoverflow and python documentation and found that it could be done with:
%run "Users/myUser/python_functions.py"
or
import python_functions
However, when I try both of these approaches, I get prompted to overwrite the file that I am running or importing:
File `python_functions.py` exists. Overwrite (y/[N])?
This is changing the previous file and not getting the functions I want to be imported.
What may explain this, and what can I do to import my module?
this is wrong but leaving it up for shame
import on ubuntu (and I'm guessing many other unix-like OSs including Mac) is a utility that saves any visible window on an X server and outputs it as an image file. You can capture a single window, the entire screen, or any rectangular portion of the screen.
My guess if you are running the import command in your console, and it's about to take a screenshot and save it over an existing file - python_functions
Before you the use the python import command, start a python interpreter:
$ python
>>>import yourfile
edit: on re-reading your question, I'm not so sure about my guess anymore, but leaving it up until you tell me I'm wrong :)
Running Jupyter qtconsole as an interpreter is likely causing the problem in this scenario. Instead using a IDE or command line interpreter will resolve it .
Since anaconda was installed, trying it with the IDE Spyder executes the code just fine without the overwrite prompt. It works on others (e.g PyCharm, Rodeo, etc.) as well.
I see how to change certain settings for matplotlib in such a way that the are used to configure it each time I launch, including when I launch interactively with
ipython --pylab
but I'm not sure how run arbitrary code each time I launch in this way, or how to ensure that certain packages have been imported. For example I'd like to do the following whenever I launch as above:
from mpltools import style
style.use('ggplot')
How do I load and run specific packages when I launch 'matplotlib'?
From the ipython website it seems you can place any .py file in the startup folder of your profile and it will be run when ipython is initiated. For help finding the profile where your startup folder is [see here].
To get the effect your looking for you need to check that matplotlib has been imported, the only way I can think of doing that is to add the following
import sys
if "matplotlib" in sys.modules:
# Do something
print
print "This seems to be working"
I have left it with the test so you can quickly determine if it is working.
Two things to note: I am using ipython 2.0.0-dev (in case this has any bearing), and secondly I suspect that calling sys.modules is not recommended, or at least that was the impression I had off the SO post I borrowed the idea from, perhaps someone better than I can enlighten us.
Say I have a script that imports various modules in Python.
import my_module
from some_other_module import foo
...
I then run this script from IPython.
Say I make changes to the function bar in my_module and foo in some_other_module.
Say that I now want to interactively call either my_module.bar() or foo() from my IPython session.
Is there a way to have IPython automatically reload every loaded module when I invoke a command before executing the command?
If not automatically, how can I reload every loaded module manually in IPython without having to explicitly name the module?
Finally, is there a way to set up my IPython session in my ipython_config.py (startup file) so that it supports this functionality off-the-shelf?
I would suggest a %load_ext autoreload followed by a %autoreload? to see how to use it.
You can also have a look at InteractiveShellApp.extensions and InteractiveShellApp.extra_extension configuration options for extension at startup.
Finally, you can also add a .py file in your IPython profile dir ($ ipython locate to get it), put it in the startup subfolder, it will be executed at startup time.
There is a restriction though, C modules cannot be reloaded.