how can I read entries in SQL where the column entries build on each other.
In the first column is the material number. These again consist of different materials, with their own material number in the first column.
How can I find out e.g. from material 123 the quantity of all sub-materials.
I have loaded the data from an Exeltabbele into a Panda database and then loaded this into a SQL database.
Should I use loops in python, to iterate over the table? Or is there a smarter way?
Also, when is it appropriate to use one?
An index is used to speed up searching in the database. MySQL has some good documentation on the subject (which is relevant for other SQL servers as well):
http://dev.mysql.com/doc/refman/5.0/en/mysql-indexes.html
An index can be used to efficiently find all rows matching some column in your query and then walk through only that subset of the table to find exact matches. If you don't have indexes on any column in the WHERE clause, the SQL server has to walk through the whole table and check every row to see if it matches, which may be a slow operation on big tables.
The index can also be a UNIQUE index, which means that you cannot have duplicate values in that column, or a PRIMARY KEY which in some storage engines defines where in the database file the value is stored.
In MySQL you can use EXPLAIN in front of your SELECT statement to see if your query will make use of any index. This is a good start for troubleshooting performance problems. Read more here:
http://dev.mysql.com/doc/refman/5.0/en/explain.html
A clustered index is like the contents of a phone book. You can open the book at 'Hilditch, David' and find all the information for all of the 'Hilditch's right next to each other. Here the keys for the clustered index are (lastname, firstname).
This makes clustered indexes great for retrieving lots of data based on range based queries since all the data is located next to each other.
Since the clustered index is actually related to how the data is stored, there is only one of them possible per table (although you can cheat to simulate multiple clustered indexes).
A non-clustered index is different in that you can have many of them and they then point at the data in the clustered index. You could have e.g. a non-clustered index at the back of a phone book which is keyed on (town, address)
Imagine if you had to search through the phone book for all the people who live in 'London' - with only the clustered index you would have to search every single item in the phone book since the key on the clustered index is on (lastname, firstname) and as a result the people living in London are scattered randomly throughout the index.
If you have a non-clustered index on (town) then these queries can be performed much more quickly.
An index is used to speed up the performance of queries. It does this by reducing the number of database data pages that have to be visited/scanned.
In SQL Server, a clustered index determines the physical order of data in a table. There can be only one clustered index per table (the clustered index IS the table). All other indexes on a table are termed non-clustered.
SQL Server Index Basics
SQL Server Indexes: The Basics
SQL Server Indexes
Index Basics
Index (wiki)
Indexes are all about finding data quickly.
Indexes in a database are analogous to indexes that you find in a book. If a book has an index, and I ask you to find a chapter in that book, you can quickly find that with the help of the index. On the other hand, if the book does not have an index, you will have to spend more time looking for the chapter by looking at every page from the start to the end of the book.
In a similar fashion, indexes in a database can help queries find data quickly. If you are new to indexes, the following videos, can be very useful. In fact, I have learned a lot from them.
Index Basics
Clustered and Non-Clustered Indexes
Unique and Non-Unique Indexes
Advantages and disadvantages of indexes
Well in general index is a B-tree. There are two types of indexes: clustered and nonclustered.
Clustered index creates a physical order of rows (it can be only one and in most cases it is also a primary key - if you create primary key on table you create clustered index on this table also).
Nonclustered index is also a binary tree but it doesn't create a physical order of rows. So the leaf nodes of nonclustered index contain PK (if it exists) or row index.
Indexes are used to increase the speed of search. Because the complexity is of O(log N). Indexes is very large and interesting topic. I can say that creating indexes on large database is some kind of art sometimes.
INDEXES - to find data easily
UNIQUE INDEX - duplicate values are not allowed
Syntax for INDEX
CREATE INDEX INDEX_NAME ON TABLE_NAME(COLUMN);
Syntax for UNIQUE INDEX
CREATE UNIQUE INDEX INDEX_NAME ON TABLE_NAME(COLUMN);
First we need to understand how normal (without indexing) query runs. It basically traverse each rows one by one and when it finds the data it returns. Refer the following image. (This image has been taken from this video.)
So suppose query is to find 50 , it will have to read 49 records as a linear search.
Refer the following image. (This image has been taken from this video)
When we apply indexing, the query will quickly find out the data without reading each one of them just by eliminating half of the data in each traversal like a binary search. The mysql indexes are stored as B-tree where all the data are in leaf node.
INDEX is a performance optimization technique that speeds up the data retrieval process. It is a persistent data structure that is associated with a Table (or View) in order to increase performance during retrieving the data from that table (or View).
Index based search is applied more particularly when your queries include WHERE filter. Otherwise, i.e, a query without WHERE-filter selects whole data and process. Searching whole table without INDEX is called Table-scan.
You will find exact information for Sql-Indexes in clear and reliable way:
follow these links:
For cocnept-wise understanding:
http://dotnetauthorities.blogspot.in/2013/12/Microsoft-SQL-Server-Training-Online-Learning-Classes-INDEX-Overview-and-Optimizations.html
For implementation-wise understanding:
http://dotnetauthorities.blogspot.in/2013/12/Microsoft-SQL-Server-Training-Online-Learning-Classes-INDEX-Creation-Deletetion-Optimizations.html
If you're using SQL Server, one of the best resources is its own Books Online that comes with the install! It's the 1st place I would refer to for ANY SQL Server related topics.
If it's practical "how should I do this?" kind of questions, then StackOverflow would be a better place to ask.
Also, I haven't been back for a while but sqlservercentral.com used to be one of the top SQL Server related sites out there.
An index is used for several different reasons. The main reason is to speed up querying so that you can get rows or sort rows faster. Another reason is to define a primary-key or unique index which will guarantee that no other columns have the same values.
So, How indexing actually works?
Well, first off, the database table does not reorder itself when we put index on a column to optimize the query performance.
An index is a data structure, (most commonly its B-tree {Its balanced tree, not binary tree}) that stores the value for a specific column in a table.
The major advantage of B-tree is that the data in it is sortable. Along with it, B-Tree data structure is time efficient and operations such as searching, insertion, deletion can be done in logarithmic time.
So the index would look like this -
Here for each column, it would be mapped with a database internal identifier (pointer) which points to the exact location of the row. And, now if we run the same query.
Visual Representation of the Query execution
So, indexing just cuts down the time complexity from o(n) to o(log n).
A detailed info - https://pankajtanwar.in/blog/what-is-the-sorting-algorithm-behind-order-by-query-in-mysql
INDEX is not part of SQL. INDEX creates a Balanced Tree on physical level to accelerate CRUD.
SQL is a language which describe the Conceptual Level Schema and External Level Schema. SQL doesn't describe Physical Level Schema.
The statement which creates an INDEX is defined by DBMS, not by SQL standard.
An index is an on-disk structure associated with a table or view that speeds retrieval of rows from the table or view. An index contains keys built from one or more columns in the table or view. These keys are stored in a structure (B-tree) that enables SQL Server to find the row or rows associated with the key values quickly and efficiently.
Indexes are automatically created when PRIMARY KEY and UNIQUE constraints are defined on table columns. For example, when you create a table with a UNIQUE constraint, Database Engine automatically creates a nonclustered index.
If you configure a PRIMARY KEY, Database Engine automatically creates a clustered index, unless a clustered index already exists. When you try to enforce a PRIMARY KEY constraint on an existing table and a clustered index already exists on that table, SQL Server enforces the primary key using a nonclustered index.
Please refer to this for more information about indexes (clustered and non clustered):
https://learn.microsoft.com/en-us/sql/relational-databases/indexes/clustered-and-nonclustered-indexes-described?view=sql-server-ver15
Hope this helps!
I have a large set of city, state pairs I'm loading into a SQLite table. I will be querying the city and will know the state. Suppose I want to look for a particular city that I know is in Texas. The following query is roughly O(n) notwithstanding the limit, right?
SELECT * FROM cities WHERE state_abbr=? LIMIT 1
Is there some way of grouping the rows by state or creating a secondary index or something so that SQLite knows where to the find the 'TX' rows and only search within them? I've considered creating separate tables for each state-- and that's an option-- but I'm hoping I can just do something within this single table to make the queries more efficient.
In the tutorials I've read, the query doesn't change after creating a composite index. Is SQLite just using the index under the hood on the same query?
Why not just have a composite index?
create index cities_state_abbr_city on cities(state, city);
I'm scraping one site.
And there are several tables that represent attributes of one observation.
I wonder if it is useful to put images in this post because It's Korean alphabet.
I insert explanation image.
There are many tables. I will reshape those table into one table, which will be one record and many fields.
But I got a problem.
A few tables have variable numbers of columns.
I'd like to store those data in sql.
From what I know, sql table has fixed numbers of fields.
Do you have a solution what I have to search??
Here is the link. http://goodauction.land.naver.com/auction/ca_view.php?product_id=1698750&class1=5&ju_price1=&ju_price2=&bi_price1=&bi_price2=&num1=&num2=&lawsup=0&lesson=0&next_biddate1=&next_biddate2=&state=91&b_count1=0&b_count2=0&b_area1=&b_area2=&special=0&e_area1=&e_area2=&si=11&gu=0&dong=0&apt_no=0&order=&start=0&total_record_val=&detail_search=&detail_class=1&recieveCode=
Those variables in table in this link indicate the winning bid, number of floors in apartment, size of the area, use of floor, and so on
And Do you recommend some sites to me in which I learn to scrape the table consisting of cells spanning multiple rows and columns using python.
If you have a table appartment, you need a table floor related to appartment
I generally use Pandas to extract data from MySQL into a dataframe. This works well and allows me to manipulate the data before analysis. This workflow works well for me.
I'm in a situation where I have a large MySQL database (multiple tables that will yield several million rows). I want to extract the data where one of the columns matches a value in a Pandas series. This series could be of variable length and may change frequently. How can I extract data from the MySQL database where one of the columns of data is found in the Pandas series? The two options I've explored are:
Extract all the data from MySQL into a Pandas dataframe (using pymysql, for example) and then keep only the rows I need (using df.isin()).
or
Query the MySQL database using a query with multiple WHERE ... OR ... OR statements (and load this into Pandas dataframe). This query could be generated using Python to join items of a list with ORs.
I guess both these methods would work but they both seem to have high overheads. Method 1 downloads a lot of unnecessary data (which could be slow and is, perhaps, a higher security risk) whilst method 2 downloads only the desired records but it requires an unwieldy query that contains potentially thousands of OR statements.
Is there a better alternative? If not, which of the two above would be preferred?
I am not familiar with pandas but strictly speaking from a database point of view you could just have your panda values inserted in a PANDA_VALUES table and then join that PANDA_VALUES table with the table(s) you want to grab your data from.
Assuming you will have some indexes in place on both PANDA_VALUES table and the table with your column the JOIN would be quite fast.
Of course you will have to have a process in place to keep PANDA_VALUES tables updated as the business needs change.
Hope it helps.