I have installed Anaconda on my Windows 10 to install Python 3.6.
I now want to run some Python scripts like test.py.
As far as I understood, I need to initialize some system variables, but I am not really able to get the whole meaning. I can set system variables by typing sysdm.cpl at the start button. Is this the right way? Otherwise?
If you want to set env variables permanently, then yes, this is the right way (start->sysdm.cpl->advanced->Environment variables)
If you want to set some variables for just one particular session, then open cmd.exe and set variables like
set _variable_=_value_
and then run your script.
1- open cmd
2-use cd to go to the file where your script is located(cd.. to go to previous folder and cd name to go to another folder)
3-when you get there in cmd type
4-python filename.py
if you are using anaconda instead of cmd use anaconda prompt
adding python to path:
1-open windows explorer
2-on the left side left click this pc and choose properties
3-then go to advanced system settings
4-then at the bottom enviorment variables
5-if you are windows 10 there will be onedrive written at top and behind it path choose path
6-then click new
7-add python directory to the path and then python directory/scripts
https://www.youtube.com/watch?v=Y2q_b4ugPWk check this
Trying to install python from the link here does not seem to give access to the python command in Msysgit... following the instructions here, does not actually say how to get python to work as needed.
Current error when running parse new project_name is:
/bin/env: python: No such file or directory
I believe it's likely because it installed it at C:\Python... anyone know how to fix this?
This error means that Git Bash does not know where your python.exe is. It searches your normal windows search path, the PATH environment variable. You're probably failing the 4th step on the instructions already "Make sure Python is working in the Git Bash":
$ python --version
sh.exe: python: command not found
To fix that, append C:\Python (or wherever you installed python) to your PATH environment variable in windows (instructions here). You need to restart the bash after this for the change to take effect. This will allow you to run python from the windows command prompt as well.
C:\> python --version
Python 2.7.2
If you don't want to alter your windows PATH variable or make python only available to git bash, you could create a .bashrc file in your %USERPROFILE% directory and set the variable there:
C:\>notepad %USERPROFILE%\.bashrc
and add
export PATH=/c/Python:$PATH
to the file. That script is executed every time you start the git bash and prepends C:\Python to git bash's PATH variable, leaving the system-wide PATH variable untouched.
Now that you know what has to be done, you can use this shortcut on the bash instead (appends the export command to your .bashrc)
$ echo export PATH=/c/Python:\$PATH >> ~/.bashrc
Hmmm. If you're using Python 2.7 like the instructions say to, you could try instead of that doing "C:/Python27/python.exe" insted of "python".
I think you can add the location of the python.exe in the PATH environment variable. Follow the steps: Go to My Computer->Right click->Properties->Advanced System Settings->Click Environmental Variables. Now click PATH and then click EDIT. In the variable value field, go to the end and append ';' (without quotes) and then add the absolute path of the .exe file which you want to run via Git-Bash.
don't know if this could be your issue, but its always worth a check.
check your python path is set correctly?
computer->properties->advanced system settings-> environment variables->system variables->PYTHONPATH, value = C:\PYTHON20;C:\PYTHON20\DLLS;C:\PYTHON20\LIB;C:\PY THON20\LIB\LIB-TK
I've been trying to figure this out for more than 2 days, screening the internet and the tutorial, but yet I don't have solved my problem. I'm a real newb and don't yet really know what I'm doing..
Software I use:
Mac OS X 10.6
Python v3.2.2
Interactive interpreter (IDLE)
Problem:
IDLE's default directory is /Users/ME/Documents/. Files with the extention .py can only be opened when located in this directory. However, I made a folder where I would like to save all the .py files etc that have to do with this software. Currently, IDLE cannot load .py files from the chosen directory by me.
What I did first was I added to IDLE:
import sys.
sys.path.append('Users/Mydir/')
sys.path
However, in an already existing thread from 2010 I read sys.path is for the Interpreter ONLY, and that if I am to change this I need to modify the PYTHONPATH environment variable:
PYTHONPATH="/Me/Documents/mydir:$PYTHONPATH"
export PYTHONPATH
However, I'm confused how to use this and cannot find answers to my following questions:
1) PYTHONPATH (.py?) is already existing on my computer when I installed the program?
If YES, where is it? I cannot find it anywhere.
If NO, I need to create one. But where and what should be the content so that IDLE can load files from a non-default directory? Should it contain only the words in bold?
I hope I made my problem clear.
Cheers
It's not totally clear to me what you mean by load. That could mean Open and Close files in the IDLE editor. Or it could mean being able to use the Python import statement to load existing Python modules from other files. I'll assume the latter, that by load you mean import.
There are two general ways to launch IDLE on Mac OS X. One is from the command line of a terminal session; if you installed Python 3.2 using the python.org installers, by default typing /usr/local/bin/idle3.2 will work. The other way is by launching IDLE.app from /Applications/Python 3.2, i.e. by double-clicking its icon. Because you say the default directory for files is your Documents folder, I'm assuming you are using the second method because IDLE.app sets Documents as its current working directory, which becomes the default directory for *Open*s and *Save*s and is automatically added as the first directory on Python's sys.path, the list of directories that Python uses to search for modules when importing.
If you want to add other directories to sys.path, as you've noted you can use the PYTHONPATH environment variable to do so. The standard way to do this is to add an export PYTHONPATH=... definition to a shell startup script, like .bash_profile. However, if you use IDLE.app, no shell is involved so commands in .bash_profile have no effect.
While there are ways to modify the environment variables for OS X GUI apps, in this case, a simpler solution is to use the other method to invoke IDLE, from the command line of a shell session, using either /usr/local/bin/idle3.2 or, if you've run the Update Shell Profile command in the /Applications/Python 3.2 folder (and opened a new terminal session), just idle3. Then, a PYTHONPATH environment variable you set up will be inherited by that IDLE.
BTW, there is no direct way to modify the initial current working directory of IDLE.app from Documents other than modifying the code in IDLE. If you start IDLE from a command
line, it inherits the current working directory of the shell.
[UPDATE] But rather than fooling around with defining PYTHONPATH, here is another even simpler, and probably better, approach that should work with either IDLE.app or the command line idle. It takes advantage of Python path configuration (.pth) files and user site-package directories. Assuming you are using a standard Python framework build of 3.2 (like from a python.org installer) on Mac OS X, create a path file for the directory you want to permanently add to sys.path. In a terminal session:
mkdir -p ~/Library/Python/3.2/lib/python/site-packages
cd ~/Library/Python/3.2/lib/python/site-packages
cat >my_paths.pth <<EOF
/Users/YOUR_USER_NAME/path/to/your_additional_python_directory_1
/Users/YOUR_USER_NAME/path/to/your_additional_python_directory_2
EOF
Now, whenever you run that Python 3.2 or IDLE under your user name, the directories you have added to the .pth file will automatically be added to sys.path.
BTW, the exact path location of the user site-packages directory for versions of Python earlier than 3.2 or 2.7 may be slightly different. Also, on other Unix-y systems, the default location for the user site-package directory is ~/.local/lib/python3.2/site-packages.
PYTHONPATH is an environment variable (see here and here). I don't have a Mac, but from the threads I have linked to you would type something like
launchctl setenv PYTHONPATH=/Me/Documents/mydir:$PYTHONPATH
on the command line to allow you to run Python scripts from /Me/Documents/mydir. Alternatively, put this line in a file called .bashrc in your home directory (~) and this path will be set each time each time you open a terminal. See here for a short introduction to .bashrc and other .bash* files. Hope that helps.
EDIT See also this question.
Whenever I use sys.path.append, the new directory will be added. However, once I close python, the list will revert to the previous (default?) values. How do I permanently add a directory to PYTHONPATH?
If you're using bash (on a Mac or GNU/Linux distro), add this to your ~/.bashrc
export PYTHONPATH="${PYTHONPATH}:/my/other/path"
You need to add your new directory to the environment variable PYTHONPATH, separated by a colon from previous contents thereof. In any form of Unix, you can do that in a startup script appropriate to whatever shell you're using (.profile or whatever, depending on your favorite shell) with a command which, again, depends on the shell in question; in Windows, you can do it through the system GUI for the purpose.
superuser.com may be a better place to ask further, i.e. for more details if you need specifics about how to enrich an environment variable in your chosen platform and shell, since it's not really a programming question per se.
Instead of manipulating PYTHONPATH you can also create a path configuration file. First find out in which directory Python searches for this information:
python -m site --user-site
For some reason this doesn't seem to work in Python 2.7. There you can use:
python -c 'import site; site._script()' --user-site
Then create a .pth file in that directory containing the path you want to add (create the directory if it doesn't exist).
For example:
# find directory
SITEDIR=$(python -m site --user-site)
# create if it doesn't exist
mkdir -p "$SITEDIR"
# create new .pth file with our path
echo "$HOME/foo/bar" > "$SITEDIR/somelib.pth"
This works on Windows
On Windows, with Python 2.7 go to the Python setup folder.
Open Lib/site-packages.
Add an example.pth empty file to this folder.
Add the required path to the file, one per each line.
Then you'll be able to see all modules within those paths from your scripts.
In case anyone is still confused - if you are on a Mac, do the following:
Open up Terminal
Type open .bash_profile
In the text file that pops up, add this line at the end:
export PYTHONPATH=$PYTHONPATH:foo/bar
Save the file, restart the Terminal, and you're done
You could add the path via your pythonrc file, which defaults to ~/.pythonrc on linux. ie.
import sys
sys.path.append('/path/to/dir')
You could also set the PYTHONPATH environment variable, in a global rc file, such ~/.profile on mac or linux, or via Control Panel -> System -> Advanced tab -> Environment Variables on windows.
To give a bit more explanation, Python will automatically construct its search paths (as mentioned above and here) using the site.py script (typically located in sys.prefix + lib/python<version>/site-packages as well as lib/site-python). One can obtain the value of sys.prefix:
python -c 'import sys; print(sys.prefix)'
The site.py script then adds a number of directories, dependent upon the platform, such as /usr/{lib,share}/python<version>/dist-packages, /usr/local/lib/python<version>/dist-packages to the search path and also searches these paths for <package>.pth config files which contain specific additional search paths. For example easy-install maintains its collection of installed packages which are added to a system specific file e.g on Ubuntu it's /usr/local/lib/python2.7/dist-packages/easy-install.pth. On a typical system there are a bunch of these .pth files around which can explain some unexpected paths in sys.path:
python -c 'import sys; print(sys.path)'
So one can create a .pth file and put in any of these directories (including the sitedir as mentioned above). This seems to be the way most packages get added to the sys.path as opposed to using the PYTHONPATH.
Note: On OSX there's a special additional search path added by site.py for 'framework builds' (but seems to work for normal command line use of python): /Library/Python/<version>/site-packages (e.g. for Python2.7: /Library/Python/2.7/site-packages/) which is where 3rd party packages are supposed to be installed (see the README in that dir). So one can add a path configuration file in there containing additional search paths e.g. create a file called /Library/Python/2.7/site-packages/pip-usr-local.pth which contains /usr/local/lib/python2.7/site-packages/ and then the system python will add that search path.
On MacOS, Instead of giving path to a specific library. Giving full path to the root project folder in
~/.bash_profile
made my day, for example:
export PYTHONPATH="${PYTHONPATH}:/Users/<myuser>/project_root_folder_path"
after this do:
source ~/.bash_profile
On linux you can create a symbolic link from your package to a directory of the PYTHONPATH without having to deal with the environment variables. Something like:
ln -s /your/path /usr/lib/pymodules/python2.7/
For me it worked when I changed the .bash_profile file. Just changing .bashrc file worked only till I restarted the shell.
For python 2.7 it should look like:
export PYTHONPATH="$PYTHONPATH:/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python"
at the end of the .bash_profile file.
Adding export PYTHONPATH="${PYTHONPATH}:/my/other/path" to the ~/.bashrc might not work if PYTHONPATH does not currently exist (because of the :).
export PYTHONPATH="/my/other/path1"
export PYTHONPATH="${PYTHONPATH}:/my/other/path2"
Adding the above to my ~/.bashrc did the trick for me on Ubuntu 16.04
This is an update to this thread which has some old answers.
For those using MAC-OS Catalina or some newer (>= 10.15), it was introduced a new Terminal named zsh (a substitute to the old bash).
I had some problems with the answers above due to this change, and I somewhat did a workaround by creating the file ~/.zshrc and pasting the file directory to the $PATH and $PYTHONPATH
So, first I did:
nano ~/.zshrc
When the editor opened I pasted the following content:
export PATH="${PATH}:/Users/caio.hc.oliveira/Library/Python/3.7/bin"
export PYTHONPATH="${PYTHONPATH}:/Users/caio.hc.oliveira/Library/Python/3.7/bin"
saved it, and restarted the terminal.
IMPORTANT: The path above is set to my computer's path, you would have to adapt it to your python.
The script below works on all platforms as it's pure Python. It makes use of the pathlib Path, documented here https://docs.python.org/3/library/pathlib.html, to make it work cross-platform. You run it once, restart the kernel and that's it. Inspired by https://medium.com/#arnaud.bertrand/modifying-python-s-search-path-with-pth-files-2a41a4143574. In order to run it it requires administrator privileges since you modify some system files.
from pathlib import Path
to_add=Path(path_of_directory_to_add)
from sys import path
if str(to_add) not in path:
minLen=999999
for index,directory in enumerate(path):
if 'site-packages' in directory and len(directory)<=minLen:
minLen=len(directory)
stpi=index
pathSitePckgs=Path(path[stpi])
with open(str(pathSitePckgs/'current_machine_paths.pth'),'w') as pth_file:
pth_file.write(str(to_add))
Just to add on awesomo's answer, you can also add that line into your ~/.bash_profile or ~/.profile
The add a new path to PYTHONPATH is doing in manually by:
adding the path to your ~/.bashrc profile, in terminal by:
vim ~/.bashrc
paste the following to your profile
export PYTHONPATH="${PYTHONPATH}:/User/johndoe/pythonModule"
then, make sure to source your bashrc profile when ever you run your code in terminal:
source ~/.bashrc
Hope this helps.
I added permanently in Windows Vista, Python 3.5
System > Control Panel > Advanced system settings > Advanced (tap) Environment Variables > System variables > (if you don't see PYTHONPATH in Variable column) (click) New > Variable name: PYTHONPATH > Variable value:
Please, write the directory in the Variable value. It is details of Blue Peppers' answer.
Fix Python Path issues when you switch from bash to zsh
I ran into Python Path problems when I switched to zsh from bash.
The solution was simple, but I failed to notice.
Pip was showing me, that the scripts blah blah or package blah blah is installed in ~/.local/bin which is not in path.
After reading some solutions to this question, I opened my .zshrc to find that the solution already existed.
I had to simply uncomment a line:
Take a look
I found a solution to do this in a anaconda environment here: https://datacomy.com/python/anaconda/add_folder_to_path/
Just:
conda develop /your_path
In Python 3.6.4 you can persist sys.path across python sessions like this:
import sys
import os
print(str(sys.path))
dir_path = os.path.dirname(os.path.realpath(__file__))
print(f"current working dir: {dir_path}")
root_dir = dir_path.replace("/util", '', 1)
print(f"root dir: {root_dir}")
sys.path.insert(0, root_dir)
print(str(sys.path))
I strongly suggest you use virtualenv and virtualenvwrapper otherwise you will clutter your path
Inspired by andrei-deusteanu answer, here is my version. This allows you to create a number of additional paths in your site-packages directory.
import os
# Add paths here. Then Run this block of code once and restart kernel. Paths should now be set.
paths_of_directories_to_add = [r'C:\GIT\project1', r'C:\GIT\project2', r'C:\GIT\project3']
# Find your site-packages directory
pathSitePckgs = os.path.join(os.path.dirname(os.__file__), 'site-packages')
# Write a .pth file in your site-packages directory
pthFile = os.path.join(pathSitePckgs,'current_machine_paths.pth')
with open(pthFile,'w') as pth_file:
pth_file.write('\n'.join(paths_of_directories_to_add))
print(pthFile)
After multiple bashing into wall. Finally resolved, in my CentOS 8 the pip3 was old, which was showing error to install the recent packages.
Now, I had downloaded the Python source package, which is Python-3.10.4 and installed the usual way, however the post-installation check generated errors in bash.
And I could not remove the existing Python, because that would break the CentOS desktop features.
Solution:
For building
./configure //don't not add --prefix=/usr, which you need to set proper care
make -j8
sudo make install
Now, as you have multiple Python installed, you can set alias python=python3
And for setting PYTHONPATH
export PYTHONPATH="/usr/local/bin/python3.10:/usr/local/lib/python3.10/lib-dynload:/usr/local/lib/python3.10/site-packages"
Don't add PYTHONHOME
For those who (like me) don't want to get too deeply involved in Python file management (which seems hopelessly overcomplicated), creating a .pth file works perfectly on my Windows 11 laptop (I'm using Visual Studio Code in Windows). So just go to the folder for your virtual environment site packages - there's mine:
Create a text file with a .pth extension - I called mine wheal.pth:
Add paths to it:
The best thing about this in VS Code is that import statements recognise this path (I had to exit VS Code and go back in), so now more typing # type: ignore to suppress linting warning messages!
on Mac :
user#terminal$ env PYTHONPATH=module_path python3
>>> import sys
>>> sys.path
['module_path', 'plus_other_python3_paths',...]
Shortest path between A <-> B is a straight line;
import sys
if not 'NEW_PATH' in sys.path:
sys.path += ['NEW_PATH']