Unable to install storm receiving the following error while doing so.
Installed pip version as follows:
pip 19.2.3
pip install storm
Using cached https://files.pythonhosted.org/packages/a7/4c/e5dbc818c432cd80d2e1aa1576f911eda49a3c206c6697db4070f402cda9/storm-0.20.tar.bz2
ERROR: Command errored out with exit status 1:
command: /usr/local/opt/python/bin/python3.7 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/lk/wrg280_17c78l9kysqx26pdc0000gp/T/pip-install-so_kwd18/storm/setup.py'"'"'; __file__='"'"'/private/var/folders/lk/wrg280_17c78l9kysqx26pdc0000gp/T/pip-install-so_kwd18/storm/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base pip-egg-info
cwd: /private/var/folders/lk/wrg280_17c78l9kysqx26pdc0000gp/T/pip-install-so_kwd18/storm/
Complete output (8 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/private/var/folders/lk/wrg280_17c78l9kysqx26pdc0000gp/T/pip-install-so_kwd18/storm/setup.py", line 5, in <module>
import ez_setup
File "/private/var/folders/lk/wrg280_17c78l9kysqx26pdc0000gp/T/pip-install-so_kwd18/storm/ez_setup.py", line 106
except pkg_resources.VersionConflict, e:
^
SyntaxError: invalid syntax
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.```
When trying to install strom i am receiving the above error.
The package storm for Python has not been maintained. The latest version 0.20 is released at 2013. The project doesn't support Python 3 at all.
It's in package, syntax error. You need to change comma(this symbol ' , ') in said line:
File
"/private/var/folders/lk/wrg280_17c78l9kysqx26pdc0000gp/T/pip-install-so_kwd18/storm/ez_setup.py",
line 106
except pkg_resources.VersionConflict, e:
to 'as', it should look like:
except pkg_resources.VersionConflict as e: # in package there is ','
But if you are just starting project, DO NOT use storm, as it's last update was nearly 7 years ago and it's not clear if it's compatible with python 3.
I don't know what you are using it for but search for something with constant support. If you are not sure which package is getting support search for last realease date on:
PyPi library
Installing directly from shell / terminal may help rather then to do it in program.
Related
By usin pip install simpleaudio I get the following:
DEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 is no longer maintained. pip 21.0 will drop support for Python 2.7 in January 2021. More details about Python 2 support in pip can be found at https://pip.pypa.io/en/latest/development/release-process/#python-2-support pip 21.0 will remove support for this functionality.
Defaulting to user installation because normal site-packages is not writeable
Collecting simpleaudio
Using cached simpleaudio-1.0.4.tar.gz (2.0 MB)
ERROR: Command errored out with exit status 1:
command: /System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/lc/wc3y14_d4vvbg6jf40sjnd140000gn/T/pip-install-FVBfFS/simpleaudio/setup.py'"'"'; file='"'"'/private/var/folders/lc/wc3y14_d4vvbg6jf40sjnd140000gn/T/pip-install-FVBfFS/simpleaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' egg_info --egg-base /private/var/folders/lc/wc3y14_d4vvbg6jf40sjnd140000gn/T/pip-pip-egg-info-UA1xfJ
cwd: /private/var/folders/lc/wc3y14_d4vvbg6jf40sjnd140000gn/T/pip-install-FVBfFS/simpleaudio/
Complete output (5 lines):
Traceback (most recent call last):
File "", line 1, in
File "/private/var/folders/lc/wc3y14_d4vvbg6jf40sjnd140000gn/T/pip-install-FVBfFS/simpleaudio/setup.py", line 42, in
encoding='utf-8') as f:
TypeError: 'encoding' is an invalid keyword argument for this function
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
Though, I am a Python programmer with little experience. It sounds like your are still using Python 2.7 which has been deprecated(not longer supported). To solve this, I recommend you go to python.org and then hover over the downloads button and then download the current version of Python.
I am on Ubuntu and I tried to install djangorestframework-gis-distance
I followed the instructions and installed the dependencies which installed fine.
But when I install djangorestframework-gis-distance it gives an error of
ERROR: Command errored out with exit status 1:
command: /home/aarush/git_fudo/food1_back/food1_back/env/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ntgn7sle/djangorestframework-gis-distance/setup.py'"'"'; __file__='"'"'/tmp/pip-install-ntgn7sle/djangorestframework-gis-distance/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base pip-egg-info
cwd: /tmp/pip-install-ntgn7sle/djangorestframework-gis-distance/
Complete output (5 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-install-ntgn7sle/djangorestframework-gis-distance/setup.py", line 9, in <module>
from pip.req import parse_requirements
ModuleNotFoundError: No module named 'pip.req'
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
Which basically says I think that there is no file called pip.req.
Is there another way I can install djangorestframework-gis-distance?
Lets see: https://pypi.org/project/djangorestframework-gis-distance/ . Latest version 1.0.0 released Feb 7, 2016.
Requires Python 2.7 but not 3+. Django 1.7+ but most probably not Django 2+. The error message indicates setup.py uses forbidden API pip.req which was only available in pip < 19 (IIRC).
The bottom line: the package is abandoned and outdated. Forget about it.
here's the output:
Using cached https://files.pythonhosted.org/packages/e1/37/c617b7de13cc506f75cbb6b88949f5ca0eb1a8229f3f40e4fe59cd469597/pytransform-0.2.3.2.tar.gz
Collecting MDAnalysis==0.8.1 (from pytransform)
Using cached https://files.pythonhosted.org/packages/9b/45/5cfc731f70af562c860d5b79329980b8b380dd8e283847c950c1f7af8d4c/MDAnalysis-0.8.1.tar.gz
ERROR: Command errored out with exit status 1:
command: 'C:\Python\python.exe' -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\gunot\\AppData\\Local\\Temp\\pip-install-_fymxu0p\\MDAnalysis\\setup.py'"'"'; __file__='"'"'C:\\Users\\gunot\\AppData\\Local\\Temp\\pip-install-_fymxu0p\\MDAnalysis\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base pip-egg-info
cwd: C:\Users\gunot\AppData\Local\Temp\pip-install-_fymxu0p\MDAnalysis\
Complete output (6 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "C:\Users\gunot\AppData\Local\Temp\pip-install-_fymxu0p\MDAnalysis\setup.py", line 58
print "MDAnalysis requires Python 2.6 or better. Python %d.%d detected" % \
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print("MDAnalysis requires Python 2.6 or better. Python %d.%d detected" % \)?
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
I dont know why it keeps saying the same error again and again
The package you are trying to install (which is ~ 5 years old) has
MDAnalysis==0.8.1
as a requirement, which is a version from 2014 and was therefore written for python 2x. In your error message you can see that in the setup.py of MDAnalysis, we have the line
print "MDAnalysis requires Python 2.6 or better. Python %d.%d detected" %
which is the python 2x syntax of print(no parantheses).
You have multiple options now:
Try to find a differerent library than pytransform that serves your need and is more up to date
Download the pytransform tar.gz file manually, extract it and replace MDAnalysis==0.8.1 in the requires.txt with MDAnalysis. This is not guaranteed to work though, as the API might have changed
Download the MDAnalysis 0.8.1 source code and try to adjust it to python 3 syntax. This might be a lot of work though
Use python2 for your project. Do note though that python2 has reached it's end of life and is no longer supported, e.g. by the newest version of pip
Note:
Looking at the code of pytransform, option 2 might be the easiest. Even if it doesn't work with the newest MDAnalysis out of the box, the code is only 74 lines long, so changing it to a newer MDAnalysis API should not be too much work
I've used Homebrew to install berkeley-db and am now struggling to install the bsddb3 Python package. Any help would be much appreciated.
bash-3.2$ BERKELEYDB_DIR=/usr/local/Cellar/berkeley-db/18.1.32_1 pip install bsddb3
Collecting bsddb3
Using cached bsddb3-6.2.7.tar.gz (437 kB)
ERROR: Command errored out with exit status 1:
command: /Users/ryonlife/.local/share/virtualenvs/peg-scrapy-pegbot-ndRdHu61/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/00/9r872f810sz481x6k9pqkldw0000gn/T/pip-install-03k5olgq/bsddb3/setup.py'"'"'; __file__='"'"'/private/var/folders/00/9r872f810sz481x6k9pqkldw0000gn/T/pip-install-03k5olgq/bsddb3/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /private/var/folders/00/9r872f810sz481x6k9pqkldw0000gn/T/pip-install-03k5olgq/bsddb3/pip-egg-info
cwd: /private/var/folders/00/9r872f810sz481x6k9pqkldw0000gn/T/pip-install-03k5olgq/bsddb3/
Complete output (8 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/private/var/folders/00/9r872f810sz481x6k9pqkldw0000gn/T/pip-install-03k5olgq/bsddb3/setup.py", line 42, in <module>
import setup3
File "/private/var/folders/00/9r872f810sz481x6k9pqkldw0000gn/T/pip-install-03k5olgq/bsddb3/setup3.py", line 354, in <module>
db_ver = (int(fullverstr[0]), int(fullverstr[2]))
ValueError: invalid literal for int() with base 10: '.'
Trying to use the Berkeley DB you specified...
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
The trick for me was using Homebrew to install berkeley-db#4, rather than berkeley-db.
brew install berkeley-db#4
BERKELEYDB_DIR=$(brew --prefix berkeley-db#4) pip install bsddb3
Do not report this issue to Homebrew/brew or Homebrew/core!
Error: You are using macOS 11.1.
We do not provide support for this pre-release version.
You will encounter build failures with some formulae.
Please create pull requests instead of asking for help on Homebrew's GitHub,
Discourse, Twitter or IRC. You are responsible for resolving any issues you
experience while you are running this pre-release version.
I am trying to install a pip module called "frhdtools". When I try to install it by running pip3 install frhdtools, I get this error:
Collecting frhdtools
Using cached https://files.pythonhosted.org/packages/ac/8b/026dd40093d1b67f15e30bff9bf8ed64d133c38cee996ba702cf941b6259/frhdtools-0.0.4.1.tar.gz
ERROR: Command errored out with exit status 1:
command: 'c:\python27\python.exe' -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'c:\\users\\gabri\\appdata\\local\\temp\\pip-install-gvvrdp\\frhdtools\\setup.py'"'"'; __file__='"'"'c:\\users\\gabri\\appdata\\local\\temp\\pip-install-gvvrdp\\frhdtools\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base pip-egg-info
cwd: c:\users\gabri\appdata\local\temp\pip-install-gvvrdp\frhdtools\
Complete output (5 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "c:\users\gabri\appdata\local\temp\pip-install-gvvrdp\frhdtools\setup.py", line 10, in <module>
version=open(versionFile).read(),
IOError: [Errno 2] No such file or directory: 'VERSION'
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
I got this error on an Ubuntu installlation about a month back and I ended up having to download the source and just run a file inside it. I am on Windows 10 now, and I was hoping it was just an issue with Ubuntu, but I guess not. I have made sure that it is Python3-compatible (in fact it is python3 only). Any thanks is greatly appreciated, thanks!
Looks like a broken package. It's not including the VERSION file that is required by setup.py. I'm not familiar enough with Python on Windows to tell you how to fix the package, but assuming this is what you're looking for, you can just download it (or clone it) directly from the GitHub page, where the VERSION file is included.