Develop Reference

Want to replace comma with decimal point in text file where after each number there is a comma in python

eg
Arun,Mishra,108,23,34,45,56,Mumbai
o\p I want is
Arun,Mishra,108.23,34,45,56,Mumbai
Tried to replace the comma with dot but all the demiliters are replaced with comma
tried text.replace(',','.') but replacing all the commas with dot

You can use regex for these kind of tasks:
import re
old_str = 'Arun,Mishra,108,23,34,45,56,Mumbai'
new_str = re.sub(r'(\d+)(,)(\d+)', r'\1.\3', old_str, 1)
>>> 'Arun,Mishra,108.23,34,45,56,Mumbai'
The search pattern r'(\d+)(,)(\d+)' was to find a comma between two numbers. There are three capture groups, therefore one can use them in the replacement: r\1.\3 (\1 and \3 are first and third groups). The old_str is the string and 1 is to tell the pattern to only replace the first occurrence (thus keep 34, 45).

It may be instructive to show how this can be done without additional module imports.
The idea is to search the string for all/any commas. Once the index of a comma has been identified, examine the characters either side (checking for digits). If such a pattern is observed, modify the string accordingly
s = 'Arun,Mishra,108,23,34,45,56,Mumbai'
pos = 1
while (pos := s.find(',', pos, len(s)-1)) > 0:
if s[pos-1].isdigit() and s[pos+1].isdigit():
s = s[:pos] + '.' + s[pos+1:]
break
pos += 1
print(s)
Output:
Arun,Mishra,108.23,34,45,56,Mumbai

Assuming you have a plain CSV file as in your single line example, we can assume there are 8 columns and you want to 'merge' columns 3 and 4 together. You can do this with a regular expression - as shown below.
Here I explicitly match the 8 columns into 8 groups - matching everything that is not a comma as a column value and then write out the 8 columns again with commas separating all except columns 3 and 4 where I put the period/dot you require.
$ echo "Arun,Mishra,108,23,34,45,56,Mumbai" | sed -r "s/([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*)/\1,\2,\3.\4,\5,\6,\7,\8/"
Arun,Mishra,108.23,34,45,56,Mumbai
This regex is for your exact data. Having a generic regex to replace any comma between two subsequent sets of digits might give false matches on other data however so I think explicitly matching the data based on the exact columns you have will be the safest way to do it.
You can take the above regex and code it into your python code as shown below.
import re
inLine = 'Arun,Mishra,108,23,34,45,56,Mumbai'
outLine = re.sub(r'([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*)'
, r'\1,\2,\3.\4,\5,\6,\7,\8', inLine, 0)
print(outLine)
As Tim Biegeleisen pointed out in an original comment, if you have access to the original source data you would be better fixing the formatting there. Of course that is not always possible.

First split the string using s.split() and then replace ',' in 2nd element
after replacing join the string back again.
s= 'Arun,Mishra,108,23,34,45,56,Mumbai '
ls = s.split(',')
ls[2] = '.'.join([ls[2], ls[3]])
ls.pop(3)
s = ','.join(ls)

It changes all the commas to dots if dot have numbers before and after itself.
txt = "2459,12 is the best number. lets change the dots . with commas , 458,45."
commaindex = 0
while commaindex != -1:
commaindex = txt.find(",",commaindex+1)
if txt[commaindex-1].isnumeric() and txt[commaindex+1].isnumeric():
txt = txt[0:commaindex] + "." + txt[commaindex+1:len(txt)+1]
print(txt)

Python Regex to extract multiple complex groups

I am trying to extract some groups of data from a text and validate if the input text is correct. In the simplified form my input text looks like this:
Sample=A,B;C,D;E,F;G,H;I&other_text
In which A-I are groups I am interested in extracting them.
In the generic form, Sample looks like this:
val11,val12;val21,val22;...;valn1,valn2;final_val
arbitrary number of comma separated pairs which are separated by semicolon, and one single value at the very end.
There must be at least two pairs before the final value.
The regular expression I came up with is something like this:
r'Sample=(\w),(\w);(\w),(\w);((\w),(\w);)*(\w)'
Assuming my desired groups are simply words (in reality they are more complex but this is out of the scope of the question).
It actually captures the whole text but fails to group the values correctly.

I am just assuming that your "values" are any composed of any characters other than , and ;, i.e. [^,;]+. This clearly needs to be modified in the re.match and re.finditer calls to meet your actual requirements.
import re
s = 'Sample=val11,val12;val21,val22;val31,val32;valn1,valn2;final_val'
# verify if there is a match:
m = re.match(r'^Sample=([^,;]+),+([^,;]+)(;([^,;]+),+([^,;]+))+;([^,;]+)$', s)
if m:
final_val = m.group(6)
other_vals = [(m.group(1), m.group(2)) for m in re.finditer(r'([^,;]+),+([^,;]+)', s[7:])]
print(final_val)
print(other_vals)
Prints:
final_val
[('val11', 'val12'), ('val21', 'val22'), ('val31', 'val32'), ('valn1', 'valn2')]

You can do this with a regex that has an OR in it to decide which kind of data you are parsing. I spaced out the regex for commenting and clarity.
data = 'val11,val12;val21,val22;valn1,valn2;final_val'
pat = re.compile(r'''
(?P<pair> # either comma separated ending in semicolon
(?P<entry_1>[^,;]+) , (?P<entry_2>[^,;]+) ;
)
| # OR
(?P<end_part> # the ending token which contains no comma or semicolon
[^;,]+
)''', re.VERBOSE)
results = []
for match in pat.finditer(data):
if match.group('pair'):
results.append(match.group('entry_1', 'entry_2'))
elif match.group('end_part'):
results.append(match.group('end_part'))
print(results)
This results in:
[('val11', 'val12'), ('val21', 'val22'), ('valn1', 'valn2'), 'final_val']

You can do this without using regex, by using string.split.
An example:
words = map(lambda x : x.split(','), 'val11,val12;val21,val22;valn1,valn2;final_val'.split(';'))
This will result in the following list:
[
['val11', 'val12'],
['val21', 'val22'],
['valn1', 'valn2'],
['final_val']
]

Splitting based on particular pattern and editing string

I am trying to split a string based on a particular pattern in an effort to rejoin it later after adding a few characters.
Here's a sample of my string: "123\babc\b:123" which I need to convert to "123\babc\\"b\":123". I need to do it several times in a long string. I have tried variations of the following:
regex = r"(\\b[a-zA-Z]+)\\b:"
test_str = "123\\babc\\b:123"
x = re.split(regex, test_str)
but it doesn't split at the right positions for me to join. Is there another way of doing this/another way of splitting and joining?

You're right, you can do it with re.split as suggested. You can split by \b and then rebuild your output with a specific separator (and keep the \b when you want too).
Here an example:
# Import module
import re
string = "123\\babc\\b:123"
# Split by "\n"
list_sliced = re.split(r'\\b', "123\\babc\\b:123")
print(list_sliced)
# ['123', 'abc', ':123']
# Define your custom separator
custom_sep = '\\\\"b\\"'
# Build your new output
output = list_sliced[0]
# Iterate over each word
for i, word in enumerate(list_sliced[1:]):
# Chose the separator according the parity (since we don't want to change the first "\b")
sep = "\\\\b"
if i % 2 == 1:
sep = custom_sep
# Update output
output += sep + word
print(output)
# 123\\babc\\"b\":123

Maybe, the following expression,
^([\\]*)([^\\]+)([\\]*)([^\\]+)([\\]*)([^:]+):(.*)$
and a replacement of,
\1\2\3\4\5\\"\6\\":\7
with a re.sub might return our desired output.
The expression is explained on the top right panel of this demo if you wish to explore/simplify/modify it.

Slice substrings from long string to a list in python

In python I have long string like (of which I removed all breaks)
stringA = 'abcdefkey:12/eas9ghijklkey:43/e3mnop'
What I want to do is to search this string for all occurrences of "key:", then extract the "values" following "key:".
One further complication for me is that I don't know how long these values belonging to key are (e.g. key:12/eas9 and key:43/e3). All I do know is that they do have to end with a digit whereas the rest of the string does not contain any digits.
This is why my idea was to slice from the indices of key plus the next say 10 characters (e.g. key:12/eas9g) and then work backward until isdigit() is false.
I tried to split my initial string (that did contain breaks):
stringA_split = re.split("\n", stringA)
for linex in stringA_split:
index_start = linex.rfind("key:")
index_end = index_start + 8
print(linex[index_start:index_end]
#then work backward
However, inserting line breaks does not help in any way as they are meaningless from a pdf-to-txt conversion.
How would I then solve this (e.g. as a start with getting all indices of '"key:"' and slice this to a list)?

import re
>>> re.findall('key:(\d+[^\d]+[\d])', stringA)
['12/eas9', '43/e3']
\d+ # One or more digits.
[^\d]+ # Everything except a digit (equivalent to [\D]).
[\d] # The final digit
(\d+[^\d]+[\d]) # The group of the expression above
'key:(\d+[^\d]+[\d])' # 'key:' followed by the group expression
If you want key: in your result:
>>> re.findall('(key:\d+[^\d]+[\d])', stringA)
['key:12/eas9', 'key:43/e3']

I'm not 100% sure I understand your definition of what defines a value, but I think this will get you what you described
import re
stringA = 'abcdefkey:12/eas9ghijklkey:43/e3mnop'
for v in stringA.split('key:'):
ma = re.match(r'(\d+\/.*\d+)', v)
if ma:
print ma.group(1)
This returns:
12/eas9
43/e3

You can apply just one RE that gets all the keys into an array of tuples:
import re
p=re.compile('key\:(\d+)\/([^\d]+\d)')
ret=p.findall(stringA)
After the execution, you have:
ret
[('12', 'eas9'), ('43', 'e3')]

edit: a better answer was posted above. I misread the original question when proposing to reverse here, which really wasn't necessary. Good luck!
If you know that the format is always key:, what if you reversed the string and rex for :yek? You'd isolate all keys and then can reverse them back
import re
# \w is alphanumeric, you may want to add some symbols
rex = re.compile("\w*:yek")
word = 'abcdefkey:12/eas9ghijklkey:43/e3mnop'
matches = re.findall(rex, word[::-1])
matches = [match[::-1] for match in matches]

How do I extract some string from a long string in Python?

I have a lot of long strings - not all of them have the same length and content, so that's why I can't use indices - and I want to extract a string from all of them. This is what I want to extract:
http://www.someDomainName.com/anyNumber
SomeDomainName doesn't contain any numbers and and anyNumber is different in each long string. The code should extract the desired string from any string possible and should take into account spaces and any other weird thing that might appear in the long string - should be possible with regex right? -. Could anybody help me with this? Thank you.
Update: I should have said that www. and .com are always the same. Also someDomainName! But there's another http://www. in the string

import re
results = re.findall(r'\bhttp://www\.someDomainName\.com/\d+\b', long_string)

>>> import re
>>> pattern = re.compile("(http://www\\.)(\\w*)(\\.com/)(\\d+)")
>>> matches = pattern.search("http://www.someDomainName.com/2134")
>>> if matches:
print matches.group(0)
print matches.group(1)
print matches.group(2)
print matches.group(3)
print matches.group(4)
http://www.someDomainName.com/2134
http://www.
someDomainName
.com/
2134
In the above pattern, we have captured 5 groups -
One is the complete string that is matched
Rest are in the order of the brackets you see.. (So, you are looking for the second one..) - (\\w*)
If you want, you can capture only the part of the string you are interested in.. So, you can remove the brackets from rest of the pattern that you don't want and just keep (\w*)
>>> pattern = re.compile("http://www\\.(\\w*)\\.com/\\d+")
>>> matches = patter.search("http://www.someDomainName.com/2134")
>>> if matches:
print matches.group(1)
someDomainName
In the above example, you won't have groups - 2, 3 and 4, as in the previous example, as we have captured only 1 group.. And yes group 0 is always captured.. That is the complete string that matches..

Yeah, your simplest bet is regex. Here's something that will probably get the job done:
import re
matcher = re.compile(r'www.(.+).com\/(.+)
matches = matcher.search(yourstring)
if matches:
str1,str2 = matches.groups()

If you are sure that there are no dots in SomeDomainName you can just take the first occurence of the string ".com/" and take everything from that index on
this will avoid you the use of regex which are harder to maintain
exp = 'http://www.aejlidjaelidjl.com/alieilael'
print exp[exp.find('.com/')+5:]