I am trying to deploy a Flask app on Heroku which responds to JSON post requests after doing some data analysis on a big JSON dataset. I referred to this question: No package 'gobject-introspection-1.0' found while deploying to Heroku but it's still not working.
requirements.txt:
flask
pandas
gunicorn
flask_cors
gdown
Package gobject-introspection-1.0 was not found in the pkg-config search path.
remote: Perhaps you should add the directory containing `gobject-introspection-1.0.pc'
remote: to the PKG_CONFIG_PATH environment variable
remote: No package 'gobject-introspection-1.0' found
remote: Command '('pkg-config', '--print-errors', '--exists', 'gobject-introspection-1.0 >= 1.46.0')' returned non-zero exit status 1.
remote:
remote: Try installing it with: 'sudo apt install libgirepository1.0-dev'
remote:
remote: ----------------------------------------
remote: Command "/app/.heroku/python/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-3ejh6vw4/PyGObject/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-lgaouqha-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-3ejh6vw4/PyGObject/
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to stormy-castle-60587.
You can try to reach your slug with heroku run bash --app appname and then try to install libgirepository1.0-dev. In case of failure, use heroku-community/apt, more info at heroku-buildpack-apt
Related
I'm simply trying to push my Flask app to Heroku but I encountered the following error:
remote: ERROR: Command errored out with exit status 1:
remote: command: /app/.heroku/python/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-qq0uk569/xlwings/setup.py'"'"'; __file__='"'"'/tmp/pip-install-qq0uk569/xlwings/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-dxixzzkg
remote: cwd: /tmp/pip-install-qq0uk569/xlwings/
remote: Complete output (5 lines):
remote: Traceback (most recent call last):
remote: File "<string>", line 1, in <module>
remote: File "/tmp/pip-install-qq0uk569/xlwings/setup.py", line 32, in <module>
remote: raise OSError("xlwings requires an installation of Excel and therefore only works on Windows and macOS. To enable the installation on Linux nevertheless, do: export INSTALL_ON_LINUX=1; pip install xlwings")
remote: OSError: xlwings requires an installation of Excel and therefore only works on Windows and macOS. To enable the installation on Linux nevertheless, do: export INSTALL_ON_LINUX=1; pip install xlwings
remote: ----------------------------------------
remote: ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to browebgen.
remote:
To https://git.heroku.com/browebgen.git
! [remote rejected] main -> main (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/browebgen.git'
I'm not sure what I need to do to get rid of this error.
The error message says it all:
xlwings requires an installation of Excel and therefore only works on Windows and macOS. To enable the installation on Linux nevertheless, do: export INSTALL_ON_LINUX=1; pip install xlwings
You might be using a package in your app named xlwings which is built to be used on Windows and Mac but the servers on Heroku have linux installed on them so you'll first have to set an environment variable INSTALL_ON_LINUX to 1 then try to deploy the app again.
From the Heroku CLI you can do:
heroku config:set INSTALL_ON_LINUX=1
I'm having issues deploying my bot i made using discord.py into discord using heroku. I've followed many guides and looked into mane other sources as well to why it is happening and nothing seems to be working. This is what i get....
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: -----> Installing python-3.6.10
remote: -----> Installing pip
remote: -----> Installing SQLite3
remote: -----> Installing requirements with pip
remote: Collecting git+https://github.com/tony1bally/education-helper (from -r /tmp/build_e8b937d57bb9efdeafd512bb63149ee1/requirements.txt (line 1))
remote: Cloning https://github.com/tony1bally/education-helper to /tmp/pip-req-build-7hfbm1vc
remote: Running command git clone -q https://github.com/tony1bally/education-helper /tmp/pip-req-build-7hfbm1vc
remote: ERROR: Command errored out with exit status 1:
remote: command: /app/.heroku/python/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-7hfbm1vc/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-7hfbm1vc/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-req-build-7hfbm1vc/pip-egg-info
remote: cwd: /tmp/pip-req-build-7hfbm1vc/
remote: Complete output (5 lines):
remote: Traceback (most recent call last):
remote: File "<string>", line 1, in <module>
remote: File "/app/.heroku/python/lib/python3.6/tokenize.py", line 452, in open
remote: buffer = _builtin_open(filename, 'rb')
remote: FileNotFoundError: [Errno 2] No such file or directory: '/tmp/pip-req-build-7hfbm1vc/setup.py'
remote: ----------------------------------------
remote: ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to education-helper.
remote:
To https://git.heroku.com/education-helper.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/education-helper.git'
Does anyone know why this is happening?
This is through the command prompt btw!
You've declared https://github.com/tony1bally/education-helper as a dependency in requirements.txt but the repository is empty and cannot be installed with pip as a Python module.
Remove it from requirements.txt, add, commit and push again.
I'm trying to use the playsound module in a very simple Django app with the below code which plays an mp3 file:
from playsound import playsound
playsound(filename)
However, my push to Heroku fails at PyOBjC (which is apparently also needed). I've pip installed playsound and PyObjC (without PyObjC, my play fails for needing AppKit). With both modules installed, the application works great on my local server.
It all works great until the Heroku build. Snippet of the error below. Does anyone have any ideas for what I need to do to get this build to work?
...
remote: Collecting pyobjc-core==6.1
remote: Downloading pyobjc-core-6.1.tar.gz (791 kB)
remote: ERROR: Command errored out with exit status 1:
remote: command: /app/.heroku/python/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-l_hzqzmw/pyobjc-core/setup.py'"'"'; __file__='"'"'/tmp/pip-install-l_hzqzmw/pyobjc-core/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-install-l_hzqzmw/pyobjc-core/pip-egg-info
remote: cwd: /tmp/pip-install-l_hzqzmw/pyobjc-core/
remote: Complete output (4 lines):
remote: /app/.heroku/python/lib/python3.8/distutils/dist.py:274: UserWarning: Unknown distribution option: 'long_description_content_type'
remote: warnings.warn(msg)
remote: running egg_info
remote: error: PyObjC requires macOS to build
remote: ----------------------------------------
remote: ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to db-devsite.
remote:
To https://git.heroku.com/db-devsite.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/db-devsite.git'
The playsound module only has a dependency on PyObjC when used on macOS, for Linux machines (such as Heroku) the library has a dependency on "PyGObject" and the GStreamer library.
Note that playsound plays the sound on the machine that's running the code, which is probably not what you want when you use Heroku (it will try to play the sound a machine at Heroku).
Attempted to deploy python web app to heroku but encountered the following errors:
remote: running build_ext
remote: Package gobject-introspection-1.0 was not found in the pkg-config search path.
remote: Perhaps you should add the directory containing `gobject-introspection-1.0.pc'
remote: to the PKG_CONFIG_PATH environment variable
remote: No package 'gobject-introspection-1.0' found
remote: Command '('pkg-config', '--print-errors', '--exists', 'gobject-introspection-1.0 >= 1.46.0')' returned non-zero exit status 1.
remote:
remote: Try installing it with: 'sudo apt install libgirepository1.0-dev'
remote:
remote: ----------------------------------------
remote: Command "/app/.heroku/python/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-l6sq2i_i/PyGObject/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-k7lo0r2b-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-l6sq2i_i/PyGObject/
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to ggoh-trailer.
remote:
To https://git.heroku.com/ggoh-trailer.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/ggoh-trailer.git'
OS = Ubuntu 18.04(Bionic)
Python 3.7.1
In requirements.txt:
pycairo==1.18.0
PyGObject==3.30.2
I've installed libgirepository1.0-dev as below;
$ whereis gobject-introspection-1.0
gobject-introspection-1: /usr/include/gobject-introspection-1.0 /usr/share/gobject-introspection-1.
But I still see the same error above. Are there any other applications that I need to install on Ubuntu to fulfill the dependency?
After manually editing requirement.txt files with content below;
Flask
gunicorn
Heroku was able to accept my git push. I've learned to only use the required dependencies in requirement.txt. Thanks Chris for point me to the right direction.
I've been trying to install certain python packages to my Django Web App on Azure. I'm trying to install the packages using the requirements.txt and pips wheel files, as is instructed here https://blogs.msdn.microsoft.com/azureossds/2015/06/29/install-native-python-modules-on-azure-web-apps-api-apps/
The problem is that pip does not seem to locate the wheelhouse folder. The wheelhouse folder is located at the root of my app directory, where I'm also keeping the requirements.txt, manage.py, readme.md and the web.config files.
Here's what my requirements.txt file looks like:
--find-links wheelhouse
django<2
pyodbc==4.0.17
django-pyodbc-azure==1.11.0
Here're the files in wheelhouse folder:
~/myapp/wheelhouse/django_pyodbc_azure-1.11.0.0-py2.py3-none-any.whl
~/myapp/wheelhouse/Django-1.11.4-py2.py3-none-any.whl
~/myapp/wheelhouse/pyodbc-4.0.17-cp27-cp27m-win_amd64.whl
~/myapp/wheelhouse/pyodbc-4.0.17-cp27-cp27m-win32.whl
I've downloaded the pyodbc .whl files from here:http://www.lfd.uci.edu/~gohlke/pythonlibs/
The django_pyodbc_azure-1.11.0.0-py2.py3-none-any.whl file was created by using a windows laptop with the windows c++ compiler for python installed (https://www.microsoft.com/en-us/download/confirmation.aspx?id=44266)
When pushing the commits to the server I still
Counting objects: 7, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (7/7), done.
Writing objects: 100% (7/7), 730 bytes | 0 bytes/s, done.
Total 7 (delta 3), reused 0 (delta 0)
remote: Updating branch 'master'.
remote: ......................................................................
remote: Updating submodules.
remote: Preparing deployment for commit id '7feb3f4dde'.
remote: Generating deployment script.
remote: Running deployment command...
remote: Handling python deployment.
remote: Detected requirements.txt. You can skip Python specific steps with a .skipPythonDeployment file.
remote: Detecting Python runtime from site configuration
remote: Detected python-2.7
remote: Deleting incompatible virtual environment.
remote: .....................................................................................
remote: Creating python-2.7 virtual environment.
remote: ...
remote: New python executable in env\Scripts\python.exe
remote: ........................................
remote: Installing setuptools, pip...done.
remote: Pip install requirements.
remote: .
remote: Downloading/unpacking django<2 (from -r requirements.txt (line 2))
remote: .........................
remote: Downloading/unpacking pyodbc==4.0.17 (from -r requirements.txt (line 3))
remote: Running setup.py (path:D:\home\site\wwwroot\env\build\pyodbc\setup.py) egg_info for package pyodbc
remote:
remote: Downloading/unpacking django-pyodbc-azure==1.11.0 (from -r requirements.txt (line 4))
remote: Downloading/unpacking pytz (from django<2->-r requirements.txt (line 2))
remote: Installing collected packages: django, pyodbc, django-pyodbc-azure, pytz
remote: .............................................................................................................................
remote: Running setup.py install for pyodbc
remote: building 'pyodbc' extension
remote: error: Microsoft Visual C++ 9.0 is required (Unable to find vcvarsall.bat). Get it from http://aka.ms/vcpython27
remote: Complete output from command D:\home\site\wwwroot\env\Scripts\python.exe -c "import setuptools, tokenize;__file__='D:\\home\\site\\wwwroot\\env\\build\\pyodbc\\setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record d:\local\temp\pip-hgg_tz-record\install-record.txt --single-version-externally-managed --compile --install-headers D:\home\site\wwwroot\env\include\site\python2.7:
remote: running install
remote:
remote: running build
remote:
remote: running build_ext
remote:
remote: building 'pyodbc' extension
remote:
remote: error: Microsoft Visual C++ 9.0 is required (Unable to find vcvarsall.bat). Get it from http://aka.ms/vcpython27
remote:
remote: ----------------------------------------
remote: Cleaning up...
remote: ..................................................................................................................................
remote: Command D:\home\site\wwwroot\env\Scripts\python.exe -c "import setuptools, tokenize;__file__='D:\\home\\site\\wwwroot\\env\\build\\pyodbc\\setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record d:\local\temp\pip-hgg_tz-record\install-record.txt --single-version-externally-managed --compile --install-headers D:\home\site\wwwroot\env\include\site\python2.7 failed with error code 1 in D:\home\site\wwwroot\env\build\pyodbc
remote: Storing debug log for failure in D:\home\pip\pip.log
remote: An error has occurred during web site deployment.
remote:
remote: Error - Changes committed to remote repository but deployment to website failed.
I'm really confused as to what I'm doing wrong here. Any ideas? One guess would be that the wheelhouse folder should be move to a subdirectory? I tried to move it to the app env folder under scripts, but it didn't work either.
Thanks for your time.
EDIT
So I tried to run the scripts straight from my Kudu console and here's the error I'm getting:
D:\home\site\wwwroot\env\Scripts\pip run on 08/25/17 15:51:48
pyodbc-4.0.17-cp27-cp27m-win32.whl is not a supported wheel on this platform.
Exception information:
Traceback (most recent call last):
File "D:\home\site\wwwroot\env\lib\site-packages\pip\basecommand.py", line 122, in main
status = self.run(options, args)
File "D:\home\site\wwwroot\env\lib\site-packages\pip\commands\install.py", line 257, in run
InstallRequirement.from_line(name, None))
File "D:\home\site\wwwroot\env\lib\site-packages\pip\req.py", line 167, in from_line
raise UnsupportedWheel("%s is not a supported wheel on this platform." % wheel.filename)
UnsupportedWheel: pyodbc-4.0.17-cp27-cp27m-win32.whl is not a supported wheel on this platform.
The recommended approach is to update Python on your WebApp using an extension:
https://learn.microsoft.com/visualstudio/python/managing-python-on-azure-app-service
Since actually, the default version of Python on WebApp are terribly old (and unsecure). You will get a newer version of pip, able to deal with all wheel files (currently it's not as you saw...).
Note that the Python extension are compiled by Microsoft, they are official.