Here are a lot of strings in unicode map.
unicode_strings = ["\U00000{:0>3}".format(str.upper(hex(i))[2:]) for i in range(16)]
but this code emits an error message.
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 0-6: truncated \UXXXXXXXX escape
This causes because of the order of evaluation.
First, "\U00000" is evaluated, Second, format is executed.
As the error message, unicode character must be the block of "\UXXXXXXXX".
Unicode characters are evaluated at the first time, but this is not the appropriate block at that time.
At the time the format function is executed, the unicode characters must be constructed completely.
I know the cap string 'r' can escape this error message, but it makes no unicode string.
How should I attach "\U" to the string or execute the format function at the first time?
If I delete '\U', the result is utopia.
['00000001',
'00000002',
'00000003',
'00000004',
'00000005',
'00000006',
'00000007',
'00000008',
'00000009',
'0000000A',
'0000000B',
'0000000C',
'0000000D',
'0000000E',
'0000000F']
UPDATE:
I want such a result.
['\U00000001',
'\U00000002',
'\U00000003',
'\U00000004',
'\U00000005',
'\U00000006',
'\U00000007',
'\U00000008',
'\U00000009',
'\U0000000A',
'\U0000000B',
'\U0000000C',
'\U0000000D',
'\U0000000E',
'\U0000000F']
I want to get the sequence of characters in Unicode map.
Not entirely sure what exactly are you after, but given that for instance \U00000000 is the same as \x00 and to generate this list a following comprehension would seem to make more sense anyways:
unicode_strings = [chr(i) for i in range(16)]
If the question was why does this happen, the format docs may be a little subtle about it:*)
The string on which this method is called can contain literal text or replacement fields delimited by braces {}... Returns a copy of the string where each replacement field is replaced with the string value of the corresponding argument.
But basically the literal strings and "replacement fields" are identified and each is considered as such. In your case a string literal \U00000 is being considered and is invalid as four bytes hex values are expected following \U. Or in other words, it's not really a matter of order (literal firsts, expressions later), but how does the str get split into chunks / processed (literals and expressions are identified first and processed as such).
So if you were trying to do something like that for a larger string generation, you could do it as follows:
somelist = [f"abcd{chr(i)}efgh" for i in range(16)]
*) PEP-498 on f-strings may be a bit more explicit (and the mechanics are the same in this respect), namely:
f-strings are parsed in to literal strings and expressions...
The parts of the f-string outside of braces are literal strings. These literal portions are then decoded. For non-raw f-strings, this includes converting backslash escapes such as '\n', '\"', "\'", '\xhh', '\uxxxx', '\Uxxxxxxxx', and named unicode characters '\N{name}' into their associated Unicode characters.
Related
While asking this question, I realized I didn't know much about raw strings. For somebody claiming to be a Django trainer, this sucks.
I know what an encoding is, and I know what u'' alone does since I get what is Unicode.
But what does r'' do exactly? What kind of string does it result in?
And above all, what the heck does ur'' do?
Finally, is there any reliable way to go back from a Unicode string to a simple raw string?
Ah, and by the way, if your system and your text editor charset are set to UTF-8, does u'' actually do anything?
There's not really any "raw string"; there are raw string literals, which are exactly the string literals marked by an 'r' before the opening quote.
A "raw string literal" is a slightly different syntax for a string literal, in which a backslash, \, is taken as meaning "just a backslash" (except when it comes right before a quote that would otherwise terminate the literal) -- no "escape sequences" to represent newlines, tabs, backspaces, form-feeds, and so on. In normal string literals, each backslash must be doubled up to avoid being taken as the start of an escape sequence.
This syntax variant exists mostly because the syntax of regular expression patterns is heavy with backslashes (but never at the end, so the "except" clause above doesn't matter) and it looks a bit better when you avoid doubling up each of them -- that's all. It also gained some popularity to express native Windows file paths (with backslashes instead of regular slashes like on other platforms), but that's very rarely needed (since normal slashes mostly work fine on Windows too) and imperfect (due to the "except" clause above).
r'...' is a byte string (in Python 2.*), ur'...' is a Unicode string (again, in Python 2.*), and any of the other three kinds of quoting also produces exactly the same types of strings (so for example r'...', r'''...''', r"...", r"""...""" are all byte strings, and so on).
Not sure what you mean by "going back" - there is no intrinsically back and forward directions, because there's no raw string type, it's just an alternative syntax to express perfectly normal string objects, byte or unicode as they may be.
And yes, in Python 2.*, u'...' is of course always distinct from just '...' -- the former is a unicode string, the latter is a byte string. What encoding the literal might be expressed in is a completely orthogonal issue.
E.g., consider (Python 2.6):
>>> sys.getsizeof('ciao')
28
>>> sys.getsizeof(u'ciao')
34
The Unicode object of course takes more memory space (very small difference for a very short string, obviously ;-).
There are two types of string in Python 2: the traditional str type and the newer unicode type. If you type a string literal without the u in front you get the old str type which stores 8-bit characters, and with the u in front you get the newer unicode type that can store any Unicode character.
The r doesn't change the type at all, it just changes how the string literal is interpreted. Without the r, backslashes are treated as escape characters. With the r, backslashes are treated as literal. Either way, the type is the same.
ur is of course a Unicode string where backslashes are literal backslashes, not part of escape codes.
You can try to convert a Unicode string to an old string using the str() function, but if there are any unicode characters that cannot be represented in the old string, you will get an exception. You could replace them with question marks first if you wish, but of course this would cause those characters to be unreadable. It is not recommended to use the str type if you want to correctly handle unicode characters.
'raw string' means it is stored as it appears. For example, '\' is just a backslash instead of an escaping.
Let me explain it simply:
In python 2, you can store string in 2 different types.
The first one is ASCII which is str type in python, it uses 1 byte of memory. (256 characters, will store mostly English alphabets and simple symbols)
The 2nd type is UNICODE which is unicode type in python. Unicode stores all types of languages.
By default, python will prefer str type but if you want to store string in unicode type you can put u in front of the text like u'text' or you can do this by calling unicode('text')
So u is just a short way to call a function to cast str to unicode. That's it!
Now the r part, you put it in front of the text to tell the computer that the text is raw text, backslash should not be an escaping character. r'\n' will not create a new line character. It's just plain text containing 2 characters.
If you want to convert str to unicode and also put raw text in there, use ur because ru will raise an error.
NOW, the important part:
You cannot store one backslash by using r, it's the only exception.
So this code will produce error: r'\'
To store a backslash (only one) you need to use '\\'
If you want to store more than 1 characters you can still use r like r'\\' will produce 2 backslashes as you expected.
I don't know the reason why r doesn't work with one backslash storage but the reason isn't described by anyone yet. I hope that it is a bug.
A "u" prefix denotes the value has type unicode rather than str.
Raw string literals, with an "r" prefix, escape any escape sequences within them, so len(r"\n") is 2. Because they escape escape sequences, you cannot end a string literal with a single backslash: that's not a valid escape sequence (e.g. r"\").
"Raw" is not part of the type, it's merely one way to represent the value. For example, "\\n" and r"\n" are identical values, just like 32, 0x20, and 0b100000 are identical.
You can have unicode raw string literals:
>>> u = ur"\n"
>>> print type(u), len(u)
<type 'unicode'> 2
The source file encoding just determines how to interpret the source file, it doesn't affect expressions or types otherwise. However, it's recommended to avoid code where an encoding other than ASCII would change the meaning:
Files using ASCII (or UTF-8, for Python 3.0) should not have a coding cookie. Latin-1 (or UTF-8) should only be used when a comment or docstring needs to mention an author name that requires Latin-1; otherwise, using \x, \u or \U escapes is the preferred way to include non-ASCII data in string literals.
Unicode string literals
Unicode string literals (string literals prefixed by u) are no longer used in Python 3. They are still valid but just for compatibility purposes with Python 2.
Raw string literals
If you want to create a string literal consisting of only easily typable characters like english letters or numbers, you can simply type them: 'hello world'. But if you want to include also some more exotic characters, you'll have to use some workaround.
One of the workarounds are Escape sequences. This way you can for example represent a new line in your string simply by adding two easily typable characters \n to your string literal. So when you print the 'hello\nworld' string, the words will be printed on separate lines. That's very handy!
On the other hand, sometimes you might want to include the actual characters \ and n into your string – you might not want them to be interpreted as a new line. Look at these examples:
'New updates are ready in c:\windows\updates\new'
'In this lesson we will learn what the \n escape sequence does.'
In such situations you can just prefix the string literal with the r character like this: r'hello\nworld' and no escape sequences will be interpreted by Python. The string will be printed exactly as you created it.
Raw string literals are not completely "raw"?
Many people expect the raw string literals to be raw in a sense that "anything placed between the quotes is ignored by Python". That is not true. Python still recognizes all the escape sequences, it just does not interpret them - it leaves them unchanged instead. It means that raw string literals still have to be valid string literals.
From the lexical definition of a string literal:
string ::= "'" stringitem* "'"
stringitem ::= stringchar | escapeseq
stringchar ::= <any source character except "\" or newline or the quote>
escapeseq ::= "\" <any source character>
It is clear that string literals (raw or not) containing a bare quote character: 'hello'world' or ending with a backslash: 'hello world\' are not valid.
Maybe this is obvious, maybe not, but you can make the string '\' by calling x=chr(92)
x=chr(92)
print type(x), len(x) # <type 'str'> 1
y='\\'
print type(y), len(y) # <type 'str'> 1
x==y # True
x is y # False
While asking this question, I realized I didn't know much about raw strings. For somebody claiming to be a Django trainer, this sucks.
I know what an encoding is, and I know what u'' alone does since I get what is Unicode.
But what does r'' do exactly? What kind of string does it result in?
And above all, what the heck does ur'' do?
Finally, is there any reliable way to go back from a Unicode string to a simple raw string?
Ah, and by the way, if your system and your text editor charset are set to UTF-8, does u'' actually do anything?
There's not really any "raw string"; there are raw string literals, which are exactly the string literals marked by an 'r' before the opening quote.
A "raw string literal" is a slightly different syntax for a string literal, in which a backslash, \, is taken as meaning "just a backslash" (except when it comes right before a quote that would otherwise terminate the literal) -- no "escape sequences" to represent newlines, tabs, backspaces, form-feeds, and so on. In normal string literals, each backslash must be doubled up to avoid being taken as the start of an escape sequence.
This syntax variant exists mostly because the syntax of regular expression patterns is heavy with backslashes (but never at the end, so the "except" clause above doesn't matter) and it looks a bit better when you avoid doubling up each of them -- that's all. It also gained some popularity to express native Windows file paths (with backslashes instead of regular slashes like on other platforms), but that's very rarely needed (since normal slashes mostly work fine on Windows too) and imperfect (due to the "except" clause above).
r'...' is a byte string (in Python 2.*), ur'...' is a Unicode string (again, in Python 2.*), and any of the other three kinds of quoting also produces exactly the same types of strings (so for example r'...', r'''...''', r"...", r"""...""" are all byte strings, and so on).
Not sure what you mean by "going back" - there is no intrinsically back and forward directions, because there's no raw string type, it's just an alternative syntax to express perfectly normal string objects, byte or unicode as they may be.
And yes, in Python 2.*, u'...' is of course always distinct from just '...' -- the former is a unicode string, the latter is a byte string. What encoding the literal might be expressed in is a completely orthogonal issue.
E.g., consider (Python 2.6):
>>> sys.getsizeof('ciao')
28
>>> sys.getsizeof(u'ciao')
34
The Unicode object of course takes more memory space (very small difference for a very short string, obviously ;-).
There are two types of string in Python 2: the traditional str type and the newer unicode type. If you type a string literal without the u in front you get the old str type which stores 8-bit characters, and with the u in front you get the newer unicode type that can store any Unicode character.
The r doesn't change the type at all, it just changes how the string literal is interpreted. Without the r, backslashes are treated as escape characters. With the r, backslashes are treated as literal. Either way, the type is the same.
ur is of course a Unicode string where backslashes are literal backslashes, not part of escape codes.
You can try to convert a Unicode string to an old string using the str() function, but if there are any unicode characters that cannot be represented in the old string, you will get an exception. You could replace them with question marks first if you wish, but of course this would cause those characters to be unreadable. It is not recommended to use the str type if you want to correctly handle unicode characters.
'raw string' means it is stored as it appears. For example, '\' is just a backslash instead of an escaping.
Let me explain it simply:
In python 2, you can store string in 2 different types.
The first one is ASCII which is str type in python, it uses 1 byte of memory. (256 characters, will store mostly English alphabets and simple symbols)
The 2nd type is UNICODE which is unicode type in python. Unicode stores all types of languages.
By default, python will prefer str type but if you want to store string in unicode type you can put u in front of the text like u'text' or you can do this by calling unicode('text')
So u is just a short way to call a function to cast str to unicode. That's it!
Now the r part, you put it in front of the text to tell the computer that the text is raw text, backslash should not be an escaping character. r'\n' will not create a new line character. It's just plain text containing 2 characters.
If you want to convert str to unicode and also put raw text in there, use ur because ru will raise an error.
NOW, the important part:
You cannot store one backslash by using r, it's the only exception.
So this code will produce error: r'\'
To store a backslash (only one) you need to use '\\'
If you want to store more than 1 characters you can still use r like r'\\' will produce 2 backslashes as you expected.
I don't know the reason why r doesn't work with one backslash storage but the reason isn't described by anyone yet. I hope that it is a bug.
A "u" prefix denotes the value has type unicode rather than str.
Raw string literals, with an "r" prefix, escape any escape sequences within them, so len(r"\n") is 2. Because they escape escape sequences, you cannot end a string literal with a single backslash: that's not a valid escape sequence (e.g. r"\").
"Raw" is not part of the type, it's merely one way to represent the value. For example, "\\n" and r"\n" are identical values, just like 32, 0x20, and 0b100000 are identical.
You can have unicode raw string literals:
>>> u = ur"\n"
>>> print type(u), len(u)
<type 'unicode'> 2
The source file encoding just determines how to interpret the source file, it doesn't affect expressions or types otherwise. However, it's recommended to avoid code where an encoding other than ASCII would change the meaning:
Files using ASCII (or UTF-8, for Python 3.0) should not have a coding cookie. Latin-1 (or UTF-8) should only be used when a comment or docstring needs to mention an author name that requires Latin-1; otherwise, using \x, \u or \U escapes is the preferred way to include non-ASCII data in string literals.
Unicode string literals
Unicode string literals (string literals prefixed by u) are no longer used in Python 3. They are still valid but just for compatibility purposes with Python 2.
Raw string literals
If you want to create a string literal consisting of only easily typable characters like english letters or numbers, you can simply type them: 'hello world'. But if you want to include also some more exotic characters, you'll have to use some workaround.
One of the workarounds are Escape sequences. This way you can for example represent a new line in your string simply by adding two easily typable characters \n to your string literal. So when you print the 'hello\nworld' string, the words will be printed on separate lines. That's very handy!
On the other hand, sometimes you might want to include the actual characters \ and n into your string – you might not want them to be interpreted as a new line. Look at these examples:
'New updates are ready in c:\windows\updates\new'
'In this lesson we will learn what the \n escape sequence does.'
In such situations you can just prefix the string literal with the r character like this: r'hello\nworld' and no escape sequences will be interpreted by Python. The string will be printed exactly as you created it.
Raw string literals are not completely "raw"?
Many people expect the raw string literals to be raw in a sense that "anything placed between the quotes is ignored by Python". That is not true. Python still recognizes all the escape sequences, it just does not interpret them - it leaves them unchanged instead. It means that raw string literals still have to be valid string literals.
From the lexical definition of a string literal:
string ::= "'" stringitem* "'"
stringitem ::= stringchar | escapeseq
stringchar ::= <any source character except "\" or newline or the quote>
escapeseq ::= "\" <any source character>
It is clear that string literals (raw or not) containing a bare quote character: 'hello'world' or ending with a backslash: 'hello world\' are not valid.
Maybe this is obvious, maybe not, but you can make the string '\' by calling x=chr(92)
x=chr(92)
print type(x), len(x) # <type 'str'> 1
y='\\'
print type(y), len(y) # <type 'str'> 1
x==y # True
x is y # False
While asking this question, I realized I didn't know much about raw strings. For somebody claiming to be a Django trainer, this sucks.
I know what an encoding is, and I know what u'' alone does since I get what is Unicode.
But what does r'' do exactly? What kind of string does it result in?
And above all, what the heck does ur'' do?
Finally, is there any reliable way to go back from a Unicode string to a simple raw string?
Ah, and by the way, if your system and your text editor charset are set to UTF-8, does u'' actually do anything?
There's not really any "raw string"; there are raw string literals, which are exactly the string literals marked by an 'r' before the opening quote.
A "raw string literal" is a slightly different syntax for a string literal, in which a backslash, \, is taken as meaning "just a backslash" (except when it comes right before a quote that would otherwise terminate the literal) -- no "escape sequences" to represent newlines, tabs, backspaces, form-feeds, and so on. In normal string literals, each backslash must be doubled up to avoid being taken as the start of an escape sequence.
This syntax variant exists mostly because the syntax of regular expression patterns is heavy with backslashes (but never at the end, so the "except" clause above doesn't matter) and it looks a bit better when you avoid doubling up each of them -- that's all. It also gained some popularity to express native Windows file paths (with backslashes instead of regular slashes like on other platforms), but that's very rarely needed (since normal slashes mostly work fine on Windows too) and imperfect (due to the "except" clause above).
r'...' is a byte string (in Python 2.*), ur'...' is a Unicode string (again, in Python 2.*), and any of the other three kinds of quoting also produces exactly the same types of strings (so for example r'...', r'''...''', r"...", r"""...""" are all byte strings, and so on).
Not sure what you mean by "going back" - there is no intrinsically back and forward directions, because there's no raw string type, it's just an alternative syntax to express perfectly normal string objects, byte or unicode as they may be.
And yes, in Python 2.*, u'...' is of course always distinct from just '...' -- the former is a unicode string, the latter is a byte string. What encoding the literal might be expressed in is a completely orthogonal issue.
E.g., consider (Python 2.6):
>>> sys.getsizeof('ciao')
28
>>> sys.getsizeof(u'ciao')
34
The Unicode object of course takes more memory space (very small difference for a very short string, obviously ;-).
There are two types of string in Python 2: the traditional str type and the newer unicode type. If you type a string literal without the u in front you get the old str type which stores 8-bit characters, and with the u in front you get the newer unicode type that can store any Unicode character.
The r doesn't change the type at all, it just changes how the string literal is interpreted. Without the r, backslashes are treated as escape characters. With the r, backslashes are treated as literal. Either way, the type is the same.
ur is of course a Unicode string where backslashes are literal backslashes, not part of escape codes.
You can try to convert a Unicode string to an old string using the str() function, but if there are any unicode characters that cannot be represented in the old string, you will get an exception. You could replace them with question marks first if you wish, but of course this would cause those characters to be unreadable. It is not recommended to use the str type if you want to correctly handle unicode characters.
'raw string' means it is stored as it appears. For example, '\' is just a backslash instead of an escaping.
Let me explain it simply:
In python 2, you can store string in 2 different types.
The first one is ASCII which is str type in python, it uses 1 byte of memory. (256 characters, will store mostly English alphabets and simple symbols)
The 2nd type is UNICODE which is unicode type in python. Unicode stores all types of languages.
By default, python will prefer str type but if you want to store string in unicode type you can put u in front of the text like u'text' or you can do this by calling unicode('text')
So u is just a short way to call a function to cast str to unicode. That's it!
Now the r part, you put it in front of the text to tell the computer that the text is raw text, backslash should not be an escaping character. r'\n' will not create a new line character. It's just plain text containing 2 characters.
If you want to convert str to unicode and also put raw text in there, use ur because ru will raise an error.
NOW, the important part:
You cannot store one backslash by using r, it's the only exception.
So this code will produce error: r'\'
To store a backslash (only one) you need to use '\\'
If you want to store more than 1 characters you can still use r like r'\\' will produce 2 backslashes as you expected.
I don't know the reason why r doesn't work with one backslash storage but the reason isn't described by anyone yet. I hope that it is a bug.
A "u" prefix denotes the value has type unicode rather than str.
Raw string literals, with an "r" prefix, escape any escape sequences within them, so len(r"\n") is 2. Because they escape escape sequences, you cannot end a string literal with a single backslash: that's not a valid escape sequence (e.g. r"\").
"Raw" is not part of the type, it's merely one way to represent the value. For example, "\\n" and r"\n" are identical values, just like 32, 0x20, and 0b100000 are identical.
You can have unicode raw string literals:
>>> u = ur"\n"
>>> print type(u), len(u)
<type 'unicode'> 2
The source file encoding just determines how to interpret the source file, it doesn't affect expressions or types otherwise. However, it's recommended to avoid code where an encoding other than ASCII would change the meaning:
Files using ASCII (or UTF-8, for Python 3.0) should not have a coding cookie. Latin-1 (or UTF-8) should only be used when a comment or docstring needs to mention an author name that requires Latin-1; otherwise, using \x, \u or \U escapes is the preferred way to include non-ASCII data in string literals.
Unicode string literals
Unicode string literals (string literals prefixed by u) are no longer used in Python 3. They are still valid but just for compatibility purposes with Python 2.
Raw string literals
If you want to create a string literal consisting of only easily typable characters like english letters or numbers, you can simply type them: 'hello world'. But if you want to include also some more exotic characters, you'll have to use some workaround.
One of the workarounds are Escape sequences. This way you can for example represent a new line in your string simply by adding two easily typable characters \n to your string literal. So when you print the 'hello\nworld' string, the words will be printed on separate lines. That's very handy!
On the other hand, sometimes you might want to include the actual characters \ and n into your string – you might not want them to be interpreted as a new line. Look at these examples:
'New updates are ready in c:\windows\updates\new'
'In this lesson we will learn what the \n escape sequence does.'
In such situations you can just prefix the string literal with the r character like this: r'hello\nworld' and no escape sequences will be interpreted by Python. The string will be printed exactly as you created it.
Raw string literals are not completely "raw"?
Many people expect the raw string literals to be raw in a sense that "anything placed between the quotes is ignored by Python". That is not true. Python still recognizes all the escape sequences, it just does not interpret them - it leaves them unchanged instead. It means that raw string literals still have to be valid string literals.
From the lexical definition of a string literal:
string ::= "'" stringitem* "'"
stringitem ::= stringchar | escapeseq
stringchar ::= <any source character except "\" or newline or the quote>
escapeseq ::= "\" <any source character>
It is clear that string literals (raw or not) containing a bare quote character: 'hello'world' or ending with a backslash: 'hello world\' are not valid.
Maybe this is obvious, maybe not, but you can make the string '\' by calling x=chr(92)
x=chr(92)
print type(x), len(x) # <type 'str'> 1
y='\\'
print type(y), len(y) # <type 'str'> 1
x==y # True
x is y # False
I have a pandas dataframe with hex values as given below:
df['col1']
<0020>
<0938>
<002E>
<092B>
<092B>
<0916>
<0915>
<0915>
<096F>
<096C>
I want to convert the hex values to their corresponding unicode literals. So, I try to do the following:
df['col1'] = df['col1'].apply(lambda x : '\u' + str(x)[1:-1])
Hoping, that this would convert it to my required unicode literal, but I get the following error:
File "<ipython-input-22-891ccdd39e79>", line 1
df['col1'].apply(lambda x : '\u' + str(x)[1:-1])
^
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 0-1: truncated \uXXXX escape
In python3, when we try the following we get :
>>> string1 = '\u03b4'
>>> print(string1)
>>> δ
So, I tried adding \u to my given string, I also tried adding \\u, but that shows up as two backslashes . Also, adding a r before \u, also ends up showing two backslashes, instead of the unicode literal. I also tried decode-unicode, but it didn't work either.
Also, it'd be great, if someone can explain the concept of rawstrings , \u, etc.
Oops, literals are for... literal values! As soon as you have variables, you should use conversion functions like int and chr.
Here you have a column containing strings. For each cell in the column, you want to remove first and last character, process what remains as an hex value, and get the unicode character with that code point. In Python, it just reads:
df['col1'].apply(lambda x: chr(int(x[1:-1], 16)))
And with your values, it gives:
0
1 स
2 .
3 फ
4 फ
5 ख
6 क
7 क
8 ९
9 ६
Now for the reason of your error.
\uxxxx escape sequences are intended for the Python parser. When they are found in a string literal they are automatically replaced with the unicode character having that code point. You can use the codecs module and the unicode_escape encoding to decode a string that would contain actual \u character characters (meaning that you escape the backslash as in "\\uxxx", but as you have directly an hex representation of the code point, it is simpler to directly use the chr function.
And in your initial code, when you write '\u', the parser sees the initial part of an encoded character and tries to decode it immediately... but cannot find the hexa code point after it, so it throws the exception. If you really want to go that way, you have to double the backslash (\) to escape it and store it as is in the string and then use codecs.decode(..., encoding='unicode_escape') to decode the string as shown in #ndclt's answer. But I do not advise you to do so.
References are to be found in the Standard Python Library documentation, chr function and codecs module.
In order to convert all your codes into unicode here one line:
import codecs
import pandas as pd
(
# create a series with the prefix "\u" to add to the existing column
pd.Series([r'\u'] * len(df['col1']))
# str.strip deletes the "<" and ">" from your column
# str.cat concatenates the prefix created before to the existing column
.str.cat(df['col1'].str.strip('<>'))
# then you apply a conversion from the raw string to normal string.
.apply(codecs.decode, args=['unicode_escape'])
)
In the previous code, you have to create the prefix as a raw string. If not, Python is waiting for a valid utf-8 code (the error you have in your code).
Edit: I add the explanation from Serge Ballesta post
\uxxxx escape sequences are intended for the Python parser. When they are found in a string literal they are automatically replaced with the unicode character having that code point. You can use the codecs module and the unicode_escape encoding to decode a string that would contain actual \u character characters (meaning that you escape the backslash as in "\uxxx", but as you have directly an hex representation of the code point, it is simpler to directly use the chr function.
His solution is more elegant than mine.
While asking this question, I realized I didn't know much about raw strings. For somebody claiming to be a Django trainer, this sucks.
I know what an encoding is, and I know what u'' alone does since I get what is Unicode.
But what does r'' do exactly? What kind of string does it result in?
And above all, what the heck does ur'' do?
Finally, is there any reliable way to go back from a Unicode string to a simple raw string?
Ah, and by the way, if your system and your text editor charset are set to UTF-8, does u'' actually do anything?
There's not really any "raw string"; there are raw string literals, which are exactly the string literals marked by an 'r' before the opening quote.
A "raw string literal" is a slightly different syntax for a string literal, in which a backslash, \, is taken as meaning "just a backslash" (except when it comes right before a quote that would otherwise terminate the literal) -- no "escape sequences" to represent newlines, tabs, backspaces, form-feeds, and so on. In normal string literals, each backslash must be doubled up to avoid being taken as the start of an escape sequence.
This syntax variant exists mostly because the syntax of regular expression patterns is heavy with backslashes (but never at the end, so the "except" clause above doesn't matter) and it looks a bit better when you avoid doubling up each of them -- that's all. It also gained some popularity to express native Windows file paths (with backslashes instead of regular slashes like on other platforms), but that's very rarely needed (since normal slashes mostly work fine on Windows too) and imperfect (due to the "except" clause above).
r'...' is a byte string (in Python 2.*), ur'...' is a Unicode string (again, in Python 2.*), and any of the other three kinds of quoting also produces exactly the same types of strings (so for example r'...', r'''...''', r"...", r"""...""" are all byte strings, and so on).
Not sure what you mean by "going back" - there is no intrinsically back and forward directions, because there's no raw string type, it's just an alternative syntax to express perfectly normal string objects, byte or unicode as they may be.
And yes, in Python 2.*, u'...' is of course always distinct from just '...' -- the former is a unicode string, the latter is a byte string. What encoding the literal might be expressed in is a completely orthogonal issue.
E.g., consider (Python 2.6):
>>> sys.getsizeof('ciao')
28
>>> sys.getsizeof(u'ciao')
34
The Unicode object of course takes more memory space (very small difference for a very short string, obviously ;-).
There are two types of string in Python 2: the traditional str type and the newer unicode type. If you type a string literal without the u in front you get the old str type which stores 8-bit characters, and with the u in front you get the newer unicode type that can store any Unicode character.
The r doesn't change the type at all, it just changes how the string literal is interpreted. Without the r, backslashes are treated as escape characters. With the r, backslashes are treated as literal. Either way, the type is the same.
ur is of course a Unicode string where backslashes are literal backslashes, not part of escape codes.
You can try to convert a Unicode string to an old string using the str() function, but if there are any unicode characters that cannot be represented in the old string, you will get an exception. You could replace them with question marks first if you wish, but of course this would cause those characters to be unreadable. It is not recommended to use the str type if you want to correctly handle unicode characters.
'raw string' means it is stored as it appears. For example, '\' is just a backslash instead of an escaping.
Let me explain it simply:
In python 2, you can store string in 2 different types.
The first one is ASCII which is str type in python, it uses 1 byte of memory. (256 characters, will store mostly English alphabets and simple symbols)
The 2nd type is UNICODE which is unicode type in python. Unicode stores all types of languages.
By default, python will prefer str type but if you want to store string in unicode type you can put u in front of the text like u'text' or you can do this by calling unicode('text')
So u is just a short way to call a function to cast str to unicode. That's it!
Now the r part, you put it in front of the text to tell the computer that the text is raw text, backslash should not be an escaping character. r'\n' will not create a new line character. It's just plain text containing 2 characters.
If you want to convert str to unicode and also put raw text in there, use ur because ru will raise an error.
NOW, the important part:
You cannot store one backslash by using r, it's the only exception.
So this code will produce error: r'\'
To store a backslash (only one) you need to use '\\'
If you want to store more than 1 characters you can still use r like r'\\' will produce 2 backslashes as you expected.
I don't know the reason why r doesn't work with one backslash storage but the reason isn't described by anyone yet. I hope that it is a bug.
A "u" prefix denotes the value has type unicode rather than str.
Raw string literals, with an "r" prefix, escape any escape sequences within them, so len(r"\n") is 2. Because they escape escape sequences, you cannot end a string literal with a single backslash: that's not a valid escape sequence (e.g. r"\").
"Raw" is not part of the type, it's merely one way to represent the value. For example, "\\n" and r"\n" are identical values, just like 32, 0x20, and 0b100000 are identical.
You can have unicode raw string literals:
>>> u = ur"\n"
>>> print type(u), len(u)
<type 'unicode'> 2
The source file encoding just determines how to interpret the source file, it doesn't affect expressions or types otherwise. However, it's recommended to avoid code where an encoding other than ASCII would change the meaning:
Files using ASCII (or UTF-8, for Python 3.0) should not have a coding cookie. Latin-1 (or UTF-8) should only be used when a comment or docstring needs to mention an author name that requires Latin-1; otherwise, using \x, \u or \U escapes is the preferred way to include non-ASCII data in string literals.
Unicode string literals
Unicode string literals (string literals prefixed by u) are no longer used in Python 3. They are still valid but just for compatibility purposes with Python 2.
Raw string literals
If you want to create a string literal consisting of only easily typable characters like english letters or numbers, you can simply type them: 'hello world'. But if you want to include also some more exotic characters, you'll have to use some workaround.
One of the workarounds are Escape sequences. This way you can for example represent a new line in your string simply by adding two easily typable characters \n to your string literal. So when you print the 'hello\nworld' string, the words will be printed on separate lines. That's very handy!
On the other hand, sometimes you might want to include the actual characters \ and n into your string – you might not want them to be interpreted as a new line. Look at these examples:
'New updates are ready in c:\windows\updates\new'
'In this lesson we will learn what the \n escape sequence does.'
In such situations you can just prefix the string literal with the r character like this: r'hello\nworld' and no escape sequences will be interpreted by Python. The string will be printed exactly as you created it.
Raw string literals are not completely "raw"?
Many people expect the raw string literals to be raw in a sense that "anything placed between the quotes is ignored by Python". That is not true. Python still recognizes all the escape sequences, it just does not interpret them - it leaves them unchanged instead. It means that raw string literals still have to be valid string literals.
From the lexical definition of a string literal:
string ::= "'" stringitem* "'"
stringitem ::= stringchar | escapeseq
stringchar ::= <any source character except "\" or newline or the quote>
escapeseq ::= "\" <any source character>
It is clear that string literals (raw or not) containing a bare quote character: 'hello'world' or ending with a backslash: 'hello world\' are not valid.
Maybe this is obvious, maybe not, but you can make the string '\' by calling x=chr(92)
x=chr(92)
print type(x), len(x) # <type 'str'> 1
y='\\'
print type(y), len(y) # <type 'str'> 1
x==y # True
x is y # False