I am doing OCR to extract information from the ID card. However, accuracy is quite low.
My assumption is that removing the background will make OCR more accurate.
I use the ID scanner machine (link) to obtain the grey image below. It seems that the machine uses IR instead of image processing.
Does anyone knows how to get the same result by using Opencv or tools (photoshop, gimp, etc)?
Thanks in advance.
Here are two more methods: adaptive thresholding and division normalization.
Input:
import cv2
import numpy as np
# read image
img = cv2.imread("green_card.jpg")
# convert img to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# do adaptive threshold on gray image
thresh1 = cv2.adaptiveThreshold(gray, 255, cv2.ADAPTIVE_THRESH_MEAN_C, cv2.THRESH_BINARY, 51, 25)
# write results to disk
cv2.imwrite("green_card_thresh1.jpg", thresh1)
# apply morphology
kernel = cv2.getStructuringElement(cv2.MORPH_RECT , (11,11))
morph = cv2.morphologyEx(gray, cv2.MORPH_DILATE, kernel)
# divide gray by morphology image
division = cv2.divide(gray, morph, scale=255)
# threshold
thresh2 = cv2.threshold(division, 0, 255, cv2.THRESH_OTSU )[1]
# write results to disk
cv2.imwrite("green_card_thresh2.jpg", thresh2)
# display it
cv2.imshow("thresh1", thresh1)
cv2.imshow("thresh2", thresh2)
cv2.waitKey(0)
Adaptive Thresholding Result:
Division Normalization Result:
EDIT:
since there are different lighting conditions, contrast adjustment is added here.
The simple approache in my mind to solve your issue is that: since the undesired background colours are Green and Red, and the desired font colour is Black, simply suppress the Red and green colours as following:
import numpy as np
import matplotlib.pyplot as plt
from skimage.io import imread, imsave
from skimage.color import rgb2gray
from skimage.filters import threshold_otsu
from skimage import exposure
def adjustContrast(img):
p2, p98 = np.percentile(img, (2, 98))
img_rescale = exposure.rescale_intensity(img, in_range=(p2, p98))
return img_rescale
# Read the image
img = imread('ID_OCR.jpg')
# Contrast Adjustment for each channel
img[:,:,0] = adjustContrast(img[:,:,0]) # R
img[:,:,1] = adjustContrast(img[:,:,1]) # G
img[:,:,2] = adjustContrast(img[:,:,2]) # B
# # Supress unwanted colors
img[img[...,0] > 100] = 255 # R
img[img[...,1] > 100] = 255 # B
# Convert the image to graylevel
img = rgb2gray(img)
# Rescale into 0-255
img = 255*img.astype(np.uint8)
# Save the results
imsave('Result.png', img)
The image will look like:
The Results are not optimal, because also your image resolution isn't high.
At the end, there are many solutions, and improvements, also you can use Morphology to make it look nicer, this is just a simple proposal to solve the problem.
Related
I have the following image:
Initial Image
I am using the following code the rotate the image:
from skimage.transform import rotate
image = cv2.imread('122.png')
rotated = rotate(image,34,cval=1,resize = True)
Once I execute this code, I receive the following image:
Rotated Image
To eliminate the blur on the image, I use the following code to set a threshold. Anything that is not white is turned to black (so the gray spots turn black). The code for that is as follows:
ret, thresh_hold = cv2.threshold(rotated, 0, 100, cv2.THRESH_BINARY)
plt.imshow(thresh_hold)
Instead of getting a nice clear picture, I receive the following:
Choppy Image
Does anyone know what I can do to improve the image quality, or adjust the threshold to create a clearer image?
I attempted to adjust the threshold to different values, but this changed the image to all black or all white.
One way to approach that is to simply antialias the image in Python/OpenCV.
To do that one simply converts to grayscale. Then blurs the image, then applies a stretch of the image.
Adjust the blur sigma to change the antialiasing.
Input:
import cv2
import numpy as np
import skimage.exposure
# load image
img = cv2.imread('122.png')
# convert to gray
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# blur threshold image
blur = cv2.GaussianBlur(gray, (0,0), sigmaX=2, sigmaY=2, borderType = cv2.BORDER_DEFAULT)
# stretch so that 255 -> 255 and 127.5 -> 0
result = skimage.exposure.rescale_intensity(blur, in_range=(127.5,255), out_range=(0,255)).astype(np.uint8)
# save output
cv2.imwrite('122_antialiased.png', result)
# Display various images to see the steps
cv2.imshow('result', result)
cv2.waitKey(0)
cv2.destroyAllWindows()
Result:
I am trying to estimate the area of vegetation in square meters on satellite photos, from the colors. I don't have a training dataset, and therefore cannot do machine learning. So I know the results will not be very good, but I try anyway.
To do this, I apply a filter on the colors thanks to cv2.inRange.
import numpy as np
import cv2
img = cv2.imread('staticmap.png')
upperbound = np.array([70, 255,255])
lowerbound = np.array([40, 40,40])
mask = cv2.inRange(img, lowerbound, upperbound)
imask = mask>0
white = np.full_like(img, [255,255,255], np.uint8)
result = np.zeros_like(img, np.uint8)
result[imask] = white[imask]
cv2.imshow(winname = 'satellite image', mat = img)
cv2.imshow('vegetation detection', result)
cv2.waitKey(0)
cv2.destroyAllWindows()
This gives the following results
So it seems that the detection is not too bad.
Now, I would like, from the density of white pixels, detect the areas where there is vegetation and areas where there is not. I imagine an output like this :
Are there any open cv functions that can do this?
You could consider using a Gaussian blur followed by Otsu thresholding like this:
import cv2
# Load image as greyscale
im = cv2.imread('veg.jpg', cv2.IMREAD_GRAYSCALE)
# Apply blur
blur = cv2.GaussianBlur(im,(19,19),0)
# Otsu threshold
_,thr = cv2.threshold(blur,0,255,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
I want to apply some kind of preprocessing to this image so that text can be more readable, so that later I can read text from image. I'm new to this so I do not know what should I do, should I increase contrast or should I reduce noise, or something else. Basically, I want to remove these gray areas on the image and keep only black letters (as clear as they can be) and white background.
import cv2
img = cv2.imread('slika1.jpg')
img = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
cv2.imshow('gray', img)
cv2.waitKey(0)
thresh = 200
img = cv2.threshold(img, thresh, 255, cv2.THRESH_BINARY)[1]
cv2.imshow('filter',img)
cv2.waitKey(0)
I read the image and applied threshold to the image but I needed to try 20 different thresholds until I found one that gives results.
Is there any better way to solve problems like this?
The problem is that I can get different pictures with different size of gray areas, so sometime I do not need to apply any kind of threshold, and sometimes I do, because of that I think that my solution with threshold is not that good.
For this image, my code works good:
But for this it gives terrible results:
Try division normalization in Python/OpenCV. Divide the input by its blurred copy. Then sharpen. You may want to crop the receipt better or mask out the background first.
Input:
import cv2
import numpy as np
import skimage.filters as filters
# read the image
img = cv2.imread('receipt2.jpg')
# convert to gray
gray = cv2.cvtColor(img,cv2.COLOR_BGR2GRAY)
# blur
smooth = cv2.GaussianBlur(gray, (95,95), 0)
# divide gray by morphology image
division = cv2.divide(gray, smooth, scale=255)
# sharpen using unsharp masking
sharp = filters.unsharp_mask(division, radius=1.5, amount=1.5, multichannel=False, preserve_range=False)
sharp = (255*sharp).clip(0,255).astype(np.uint8)
# save results
cv2.imwrite('receipt2_division.png',division)
cv2.imwrite('receipt2_division_sharp.png',sharp)
# show results
cv2.imshow('smooth', smooth)
cv2.imshow('division', division)
cv2.imshow('sharp', sharp)
cv2.waitKey(0)
cv2.destroyAllWindows()
Division result:
Sharpened result:
I am trying to remove text from images that has a black border with white fill. Take the image below as an example.
I have tried a few options utilizing opencv and skimage inpaint
import cv2
from skimage.restoration import inpaint
img = cv2.imread('Documents/test_image.png')
mask = cv2.threshold(img, 210, 255, cv2.THRESH_BINARY)[1][:,:,0]
dst = cv2.inpaint(img, mask, 7, cv2.INPAINT_TELEA)
image_result = inpaint.inpaint_biharmonic(img, mask,
multichannel=True)
cv2.imshow('image',img)
cv2.imshow('mask',mask)
cv2.imshow('dst',dst)
cv2.imshow('image_result',image_result)
cv2.waitKey(0)
It seems like the inpainting is just trying to fill with black as that is what it is identifying as being around the areas of interest. What I would like to do is remove the white text and black borders completely, or secondarily try to fill the white with more information from surrounding colors than just the black.
Here is the best solution I could come up with, still open to others with more experience showing me a better way if anyone has an idea.
mask = cv2.threshold(img, 245, 255, cv2.THRESH_BINARY)[1][:,:,0]
new_mask = cv2.dilate(mask, cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (10,10)))
dst = cv2.inpaint(img, new_mask, 7, cv2.INPAINT_TELEA)
Here are two inpainting methods in Python/OpenCV. Note that I use the saturation channel to create the threshold, since white and black have zero saturation, in principle.
Input:
import cv2
import numpy as np
# read input
img = cv2.imread('white_black_text.png')
# convert to hsv and extract saturation
hsv = cv2.cvtColor(img,cv2.COLOR_BGR2HSV)
sat = hsv[:,:,1]
# threshold and invert
thresh = cv2.threshold(sat, 10, 255, cv2.THRESH_BINARY)[1]
thresh = 255 - thresh
# apply morphology dilate
kernel = cv2.getStructuringElement(cv2.MORPH_ELLIPSE, (15,15))
thresh = cv2.morphologyEx(thresh, cv2.MORPH_DILATE, kernel)
# do inpainting
result1 = cv2.inpaint(img,thresh,11,cv2.INPAINT_TELEA)
result2 = cv2.inpaint(img,thresh,11,cv2.INPAINT_NS)
# save results
cv2.imwrite('white_black_text_threshold.png', thresh)
cv2.imwrite('white_black_text_inpainted1.png', result1)
cv2.imwrite('white_black_text_inpainted2.png', result1)
# show results
cv2.imshow('thresh',thresh)
cv2.imshow('result1',result1)
cv2.imshow('result2',result2)
cv2.waitKey(0)
cv2.destroyAllWindows()
Threshold and morphology cleaned result:
Result 1 (Telea):
Result 2 (Navier Stokes):
I would like to detect all the bright spots in this image (https://i.imgur.com/UnTWWHz.png)
The code I've tried is via thresholding, but it only detects the very bright ones. As you can see in the image below.
But some of the spots are out of focus which I need to also detect them.
Could you suggest a method? The picture below shows the blurred spots that I'd like to detect in yellow circles
I tried with the following code
import os
import cv2
import numpy as np
path="C:/Slides/Fluoroscent/E_03_G_O_subpics"
imgname="sub_2_4.png"
image = cv2.imread(os.path.join(path,imgname))
# constants
BINARY_THRESHOLD = 10
CONNECTIVITY = 4
DRAW_CIRCLE_RADIUS = 18
thr=50
# convert to gray
gray_image = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
# threshold the black/ non-black areas
_, thresh = cv2.threshold(gray_image, BINARY_THRESHOLD, thr, cv2.THRESH_BINARY)
# find connected components
components = cv2.connectedComponentsWithStats(thresh, CONNECTIVITY, cv2.CV_32S)
# draw circles around center of components
#see connectedComponentsWithStats function for attributes of components variable
centers = components[3]
for center in centers:
cv2.circle(image, (int(center[0]), int(center[1])), DRAW_CIRCLE_RADIUS, (0,0,255), thickness=1)
cv2.imwrite(os.path.join(path,"result_thresh_"+str(thr)+".png"), image)
cv2.imshow("result", image)
cv2.waitKey(0)
As mentioned in the comments you will get better results by changing the threshold values. I changed the values to 20 and 255 respectively and added erosion to get rid of some noise. You can play around with morphological transformations to get the exact desired result. Read more here .
Code:
import cv2
import numpy as np
kernel = np.ones((5,5),np.uint8)
CONNECTIVITY = 4
DRAW_CIRCLE_RADIUS = 18
img = cv2.imread('blobs.png')
gray_img = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
ret, thresh = cv2.threshold(gray_img, 20, 255, cv2.THRESH_BINARY)
erosion = cv2.erode(thresh,kernel,iterations = 1)
components = cv2.connectedComponentsWithStats(erosion, CONNECTIVITY, cv2.CV_32S)
centers = components[3]
for center in centers:
cv2.circle(img, (int(center[0]), int(center[1])), DRAW_CIRCLE_RADIUS, (0,0,255), thickness=1)
cv2.imshow('Original', img)
cv2.imshow('Thresh', thresh)
cv2.imshow('Erosion', erosion)
cv2.waitKey(0)
Results:
Threshold
Erosion
Original with circles