How can I put an inner python function at the bottom of the code, and call it from the beginning?
For example, VBA dosent care where the phisical inner function code is.
Rexx ( which is also interpreter) also does not care.
How can I do it in Python?
It is much easier to understand the code when the functions are at the bottom.
thanks
You could not do that.
Python runs your code from top to bottom, so it first needs to declare your functions to access them later. You can not first access, later declare, because you would tring to access non exsistent values.
In compiled code, it may works. But in script languages, like python, it does not. As far as I know.
You can do like this:
def main():
print(f(3))
def f(x):
return x * x
if __name__ == "__main__":
main()
Or do you talk about nested functions?
BTW: using the construct in the bottom of my example is anyway good practice to execute the main code only if the module is called as a script. And if it isn't, code shouldn't be extensively executed anyhow before the module is imported (and functions called from outside).
Related
I have this code:
import sys
def random(size=16):
return open(r"C:\Users\ravishankarv\Documents\Python\key.txt").read(size)
def main():
key = random(13)
print(key)
When I try running the script, there are no errors, but nothing appears to happen. I expected it to print some content from the key file, but nothing is printed.
What is wrong? How do I make the code run?
You've not called your main function at all, so the Python interpreter won't call it for you.
Add this as the last line to just have it called at all times:
main()
Or, if you use the commonly seen:
if __name__ == "__main__":
main()
It will make sure your main method is called only if that module is executed as the starting code by the Python interpreter. More about that here: What does if __name__ == "__main__": do?
If you want to know how to write the best possible 'main' function, Guido van Rossum (the creator of Python) wrote about it here.
Python isn't like other languages where it automatically calls the main() function. All you have done is defined your function.
You have to manually call your main function:
main()
Also, you may commonly see this in some code:
if __name__ == '__main__':
main()
There's no such main method in python, what you have to do is:
if __name__ == '__main__':
main()
Something does happen, it just isn't noticeable
Python runs scripts from top to bottom. def is a statement, and it executes when it is encountered, just like any other statement. However, the effect of this is to create the function (and assign it a name), not to call it. Similarly, import is a statement that loads the other module (and makes its code run top to bottom, with its own global-variable context), and assigns it a name.
When the example code runs, therefore, three things happen:
The code for the sys standard library module runs, and then the name sys in our own module's global variables is bound to that module
A function is created from the code for random, and then the name random is bound to that function
A function is created from the code for main, and then the name main is bound to that function
There is nothing to call the functions, so they aren't called. Since they aren't called, the code inside them isn't run - it's only used to create the functions. Since that code doesn't run, the file isn't read and nothing is printed.
There are no "special" function names
Unlike in some other languages, Python does not care that a function is named main, or anything else. It will not be run automatically.
As the Zen of Python says, "Explicit is better than implicit". If we want a function to be called, we have to call it. The only things that run automatically are the things at top level, because those are the instructions we explicitly gave.
The script starts at the top
In many real-world scripts, you may see a line that says if __name__ == '__main__':. This is not "where the script starts". The script runs top to bottom.
Please read What does if __name__ == "__main__": do? to understand the purpose of such an if statement (short version: it makes sure that part of your top-level code is skipped if someone else imports this file as a module). It is not mandatory, and it does not have any kind of special "signalling" purpose to say where the code starts running. It is just a perfectly normal if statement, that is checking a slightly unusual condition. Nothing requires you to use it in a script (aside from wanting to check what it checks), and nothing prevents you from using it more than once. Nothing prevents you from checking whether __name__ is equal to other values, either (it's just... almost certainly useless).
You're not calling the function. Put main() at the bottom of your code.
Before I begin, I know there are many questions that sound a lot like this one, but my question is a little different... So here it is...
As the title may of suggested, I am trying to call a function defined in my main.py script in an imported module. However, this situation is a bit different than that of a circular import situation. I have been doing a lot with pygame recently, and decided that I was gonna make a module that contains classes for buttons, text, sounds, and so on. But I want this file to be generic so it can be used with any game or application I make. Buttons usually have draw functions and stuff like that, so I can easily pass those variables into the functions without problem. The problem comes when I get to the part where I want to check if the button is clicked, and if it is do something. I want to have it set up so that I can pass in a string argument for a command, and use the eval() command on it (python 2.7). However, it throws the error of the function not being defined. I know why this is, but I want to see if there is anything I can do to get around this issue to keep the module as "generic" as possible. Below is a basic set of code to help explain what I want to do.
module1.py
class Button(object):
def __init__(self,x=0,y=0,image=None,command=""):
self.x = x
self.y = y
self.image = image
self.command = command
"""
Image this part filled with draw commands and stuff...
These functions work perfectly fine
"""
#Now here is the issue - local is mouse position
def checkClick(self, local):
#If statments here to determine if mouse over button and
#if mouse is clicked... The part below fails
eval(self.command)
main.py
import module1
import pygame
def quitgame():
pygame.quit()
quit()
local = pygame.mouse.get_pos()
b = module1.Button(command="quitgame")
#At this point lets assume that the mouse is overtop the button and the
#following function in the button will run
b.checkClick(local)
The error, as I said before states that the function I try to call is not defined. I have found a workaround for this, so I don't want answers that tell me how I can change this so it does not take a command as input. I would like however, to make it so I can input a command as an argument. Maybe I am not inputing a command the way I should, but I would like to do it like this, especially because the tkinter module allows you to enter a command as input/a variable. Maybe there is not a way to do this like I wish, but I really want to keep this code as reusable as possible with no changing required between games, and I would rather not have to put this code into my games/applications every time I make them (like I said before the code example I gave was just an example, my actual button code is much larger than what I did above). Like I said before as well, I know that there are many questions that are just like this one, but they have not helped me at all with this issue. The others suggested using scripts that are imported as well which contain addition variables and such, but I would rather not do this. Also, I have a workaround that completely gets rid of the issue, but it is not nearly as neat or easy as this would be.
As always, any help would be appreciated and thanks ahead of time for your answers in case I don't get back to you right away.
I want to have it set up so that I can pass in a string argument for a command, and use the eval() command on it (python 2.7).
No, no, no. Pass it a function:
# In main.py
b = module1.Button(command=quitgame)
# In module1.py
def checkClick(self, local):
...
self.command()
eval is almost never the right tool for any job.
If you don't want to define a function just to pass it as a command parameter, you can use a lambda for short (single-expression) functions:
b = module1.Button(command=lambda: do_whatever(some, arguments))
Please excuse what I know is an incredibly basic question that I have nevertheless been unable to resolve on my own.
I'm trying to switch over my data analysis from Matlab to Python, and I'm struggling with something very basic: in Matlab, I write a function in the editor, and to use that function I simply call it from the command line, or within other functions. The function that I compose in the matlab editor is given a name at the function definition line, and it's generally best for the function name to match the .m file name to avoid confusion.
I don't understand how functions differ in Python, because I have not been successful translating the same approach there.
For instance, if I write a function in the Python editor (I'm using Python 2.7 and Spyder), simply saving the .py file and calling it by its name from the Python terminal does not work. I get a "function not defined" error. However, if I execute the function within Spyder's editor (using the "run file" button), not only does the code execute properly, from that point on the function is also call-able directly from the terminal.
So...what am I doing wrong? I fully appreciate that using Python isn't going to be identical to Matlab in every way, but it seems that what I'm trying to do isn't unreasonable. I simply want to be able to write functions and call them from the python command line, without having to run each and every one through the editor first. I'm sure my mistake here must be very simple, yet doing quite a lot of reading online hasn't led me to an answer.
Thanks for any information!
If you want to use functions defined in a particular file in Python you need to "import" that file first. This is similar to running the code in that file. Matlab doesn't require you to do this because it searches for files with a matching name and automagically reads in the code for you.
For example,
myFunction.py is a file containing
def myAdd(a, b):
return a + b
In order to access this function from the Python command line or another file I would type
from myFunction import myAdd
And then during this session I can type
myAdd(1, 2)
There are a couple of ways of using import, see here.
You need to a check for __main__ to your python script
def myFunction():
pass
if __name__ == "__main__":
myFunction()
then you can run your script from terminal like this
python myscript.py
Also if your function is in another file you need to import it
from myFunctions import myFunction
myFunction()
Python doesn't have MATLAB's "one function per file" limitation. You can have as many functions as you want in a given file, and all of them can be accessed from the command line or from other functions.
Python also doesn't follow MATLAB's practice of always automatically making every function it can find usable all the time, which tends to lead to function name collisions (two functions with the same name).
Instead, Python uses the concept of a "module". A module is just a file (your .py file). That file can have zero or more functions, zero or more variables, and zero or more classes. When you want to use something from that file, you just import it.
So say you have a file 'mystuff.py':
X = 1
Y = 2
def myfunc1(a, b):
do_something
def myfunc2(c, d):
do_something
And you want to use it, you can just type import mystuff. You can then access any of the variables or functions in mystuff. To call myfunc2, you can just do mystuff.myfunc2(z, w).
What basically happens is that when you type import mystuff, it just executes the code in the file, and makes all the variables that result available from mystuff.<varname>, where <varname> is the name of the variable. Unlike in MATLAB, Python functions are treated like any other variable, so they can be accessed just like any other variable. The same is true with classes.
There are other ways to import, too, such as from mystuff import myfunc.
You run python programs by running them with
python program.py
This question already has answers here:
Why doesn't the main() function run when I start a Python script? Where does the script start running (what is its entry point)?
(5 answers)
Closed 5 months ago.
Consider:
#! /usr/bin/python
def main():
print("boo")
This code does nothing when I try to run it in Python 3.3. No error or anything.
What’s wrong?
gvim script
chmod 775 script
./script
You still have to call the function.
def main(): # declaring a function just declares it - the code doesn't run
print("boo")
main() # here we call the function
I assumed you wanted to call the print function when the script was executed from the command line.
In Python you can figure out if the script containing a piece of code is the same as the script which was launched initially by checking the __name__ variable against __main__.
#! /usr/bin/python
if __name__ == '__main__':
print("boo")
With just these lines of code:
def main():
print("boo")
you're defining a function and not actually invoking it. To invoke the function main(), you need to call it like this:
main()
You need to call that function. Update the script to:
#! /usr/bin/python
def main():
print("boo")
# Call it
main()
In Python, if you want to write a script to perform a series of small tasks sequentially, then there is absolutely no need to write a function to contain them.
Just put each on a line on its own; or use an expression delimiter like ; (not really recommended, but you can do is you so desire), likewise:
task1
task2
task3
task4
or
task1; task2; task3; (again **not** really recommended, and certainly not pythonic)
In your case your code could be turned to something like:
print('boo')
print('boo2')
print('boo3')
and it would still act as you expect it to, without the main() method, as they get evaluated sequentially.
Please note that the reason you might want to create a function for these series of tasks is:
to present a nice interface (to clients of the code),
or to encapsulate repeated logic
There might be more uses, but that's the first I can come up with, and serve to prove my point.
Now, if you feel compelled to write code that resembles the main() method in other programming languages, then please use the following Python idiom (as stated by other users so far):
if __name__ == '__main__':
doSomething()
The above is working as follows:
When you import a Python module, it gets a string (usually, the name under which it was imported) assigned as its __name__ attribute.
When you execute a script directly (by invoking the Python vm and passing it the script's name as an argument), the __name__ attribute is set to __main__
So when you use the above idiom, you can both use the script as a pluggable module by importing it at will, or just execute it directly to have the series of expressions under the if __name__ == '__main__': be evaluated directly.
Should you feel the need to dig through more information, my sources were the following:
Python documentation: Modules
Python documentation: Executing modules as scripts
Python documentation: The data model (search for __name__)
If you find the other answers confusing or intimidating, here's a parable which should hopefully help. Look at the following Python program:
a = 34
When it runs, it does something: before exiting the script, Python learns that there is a variable a and that its value is the integer 34. It doesn't do anything with this information, but it's a complete program which does something. In order for it to produce some actual value, it needs to interact with its environment, though. What does it do with this value? It could create 34 directories, or ping the 34th server in your data center, or check the strength of the passwords of the newest 34 users in your database, or whatever; or just print something.
a = 34
print(a)
The following program is in some sense very similar to the first one.
def b():
a = 34
print(a)
When you run this program, it does something: Python now knows that there is a function named b, and that it doesn't take any arguments, and that it contains some syntactically valid Python code which will be run when some other code calls it, but it doesn't actually do anything with this code yet. In order to observe any value being produced by the code in the function, you have to actually call it:
b()
(As an aside, maybe also note that the local variable a inside the function declaration b is distinct from the global variable with the same name.)
Sorry for the beginner question, but I can't figure out cProfile (I'm really new to Python)
I can run it via my terminal with:
python -m cProfile myscript.py
But I need to run it on a webserver, so I'd like to put the command within the script it will look at. How would I do this? I've seen stuff using terms like __init__ and __main__ but I dont really understand what those are.
I know this is simple, I'm just still trying to learn everything and I know there's someone who will know this.
Thanks in advance! I appreciate it.
I think you've been seeing ideas like this:
if __name__ == "__main__":
# do something if this script is invoked
# as python scriptname. Otherwise, gets ignored.
What happens is when you call python on a script, that file has an attribute __name__ set to "__main__" if it is the file being directly called by the python executable. Otherwise, (if it is not directly called) it is imported.
Now, you can use this trick on your scripts if you need to, for example, assuming you have:
def somescriptfunc():
# does something
pass
if __name__ == "__main__":
# do something if this script is invoked
# as python scriptname. Otherwise, gets ignored.
import cProfile
cProfile.run('somescriptfunc()')
This changes your script. When imported, its member functions, classes etc can be used as normal. When run from the command-line, it profiles itself.
Is this what you're looking for?
From the comments I've gathered more is perhaps needed, so here goes:
If you're running a script from CGI changes are it is of the form:
# do some stuff to extract the parameters
# do something with the parameters
# return the response.
When I say abstract out, you can do this:
def do_something_with_parameters(param1, param2):
pass
if __name__ = "__main__":
import cProfile
cProfile.run('do_something_with_parameters(param1=\'sometestvalue\')')
Put that file on your python path. When run itself, it will profile the function you want profiling.
Now, for your CGI script, create a script that does:
import {insert name of script from above here}
# do something to determine parameter values
# do something with them *via the function*:
do_something_with_parameters(param1=..., param2=...)
# return something
So your cgi script just becomes a little wrapper for your function (which it is anyway) and your function is now self-testing.
You can then profile the function using made up values on your desktop, away from the production server.
There are probably neater ways to achieve this, but it would work.