I'm trying to implement mutual authentication on a ftps connection using ftplib module.
Here is my code:
Context = ssl.SSLContext(ssl.PROTOCOL_TLSv1_2)
Context.load_verify_locations(cafile=trusted.txt,capath=path)
Context.load_cert_chain(certfile=mycert.txt,keyfile=mikey.txt,password=xxxx)
Context.verify_mode=True
Ftp = ftplib.FTP_TLS(Context=Context)
Ftp.connect(host, port)
Ftp.auth()
Ftp.prot_p()
Ftp.set_pasv(True)
Ftp.cwd(dest_dir)
Ftp.storlines(xx,xx)
Ftp.close()
However above works fine only with client authentication set as no on ftps server side. When we try with client Auth yes
Error code is as below.
Ssl.SSLError: [SSL:SSLV3_ALERT_CERTIFICATE_UNKNOWN] sslv3 alert certificate unknown (_ssl.c:777)
I have the servers cert chain on ca file defined.
I have my trusted on servers side defined.
Still connection doesn't work well. And it works well if client Auth is disabled on server side.
Any suggestions on what could be wrong. Could it be ciphers?
I tried setting up ciphers but don't know how exchange happens in realtime. Or could this be that ftplib does not support fully mutually authentication at all??
Ssl.SSLError: [SSL:SSLV3_ALERT_CERTIFICATE_UNKNOWN] sslv3 alert certificate unknown (_ssl.c:777)
If you get this error in the client then the server failed to validate the client certificate, i.e. your mycert.txt and mikey.txt.
Since validation of the client certificate is done by the server you have to look at the server configuration and logs for more information of why your client certificate was not accepted. Typical problems are that the client certificate is a self-signed certificate, that the CA which issued the client certificate is not trusted in the server or that intermediate certificates are required to verify the certificate but the client is not sending these.
Related
I need your help.
I want to generate a certificate for a client for authorization on my api.
In my use case, I have an API that is hosted with python hypercorn and fastapi. Then I have multiple clients (also python (httpx)) that should request data from this api. For authentication between the client and the server, I want to use certificates. I want to provide the client with a certificate with which it can authorize itself with the server.
For generating the certificates i used this instruction: https://www.makethenmakeinstall.com/2014/05/ssl-client-authentication-step-by-step/
What did I do wrong, or how can I implement my use case?
server:
async def main():
config = Config.from_mapping(dict(
worker_class='trio',
certfile='server.cer',
keyfile='server.key',
verify_mode=VerifyMode.CERT_REQUIRED,
bind=f"0.0.0.0:{8000}"))
async with trio.open_nursery() as nursery:
nursery.start_soon(serve, app, config)
client:
import httpx
res = httpx.get("https://localhost:8000/", verify=True, cert=("client.cer", "client.key"))
res
When I execute the request in the client I get the following error:
ConnectError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate (_ssl.c:1123)
let's simplify how certificates work.
certificates used for authentication and authorization and this is what you're exactly doing in your case. your backend-server has its own certificate, and your client has his own certificate. your applications is set to recognize each other using these certificates and you're doing it in a great way.
but certificates are vulnerable and can be created locally, so I myself can create a certificate that says that I'm facebook or google. and here is the validation's role come; a well know authority that's already implemented in all browsers and OS - and we call it CA for a certification authority - signs your certificates, so when your server send its cert to a client, the client's browser would recognize the signature and tells you that the certificate is valid.
in your case here you have a self signed certificate, which means that for development purpose you've signed your cert by yourself "instead of the recognized CAs".
Overcoming such an issue would be in two ways.
you disable the validation in your code and in your client side as well. suits for development purpose or intra network.
sign your certificate and your client's certificate with a recognized authority like digicert, and add your CA in your trust-store.
Currently my client side HTTPS request code looks like this:
resp = requests.post(endpoint_predict_v100, files={'image': open(file_path, 'rb')}, verify=client_auth,
cert=(client_cert_path, client_secret_path))
This is an HTTPS request, the server root CA is client_auth and the client certificate and key are client_cert_path and client_secret_path.
because my server code is deployed and I cannot change much on that side, I am wondering if I can do the following on the client side:
enable server authentication only when the server root CA is provided by the client
enable client authentication only when the client cert and key are provided by the client.
I have found out that I am able to do the first thing, "enable server authentication only when the server root CA is provided by the client", by passing verify=False if the server root CA is not presented on the client side., referring to the Python requests docs. However, when I try to remove the cert=(client_cert_path, client_secret_path), the request will fail, throwing this error:
ssl.SSLError: [SSL] tlsv13 alert certificate required (_ssl.c:2570)
It seems that this error is suggesting I must pass in the client cert and key to make the server accept my request. but is there a way to disable client authentication on the client side, when the client cert and key are not present?
ssl.SSLError: [SSL] tlsv13 alert certificate required (_ssl.c:2570)
... is there a way to disable client authentication on the client side, when the client cert and key are not present?
The alert you get is because the server is requiring the client certificate. Since it is required by the server it is not sufficient to change some client side behavior only. This is similar to a server requesting authentication by password - this cannot be simply skipped in the client too.
With many servers there is a way to have client certificates optional, i.e. request a client certificate but don't insist that one is sent. How to do this with your specific server and if it is supported by your server at all is unknown though.
I'm trying to use aio-pika to establish a secured connection to rabbitmq, while disabling certificate verification.
According to the documentation you can pass both ssl boolean flag, and ssl_options dictionary.
I tried passing both, specifying ssl_option with no certificate, but it still fails.
connection = await connect_robust(
host=self.host,
virtualhost=self.rmq_vhost,
port=int(self.rmq_port),
login=self.rmq_user,
ssl=True,
ssl_options=None, # also tried dict(cert_reqs=ssl.CERT_NONE),
password=self.rmq_pass,
loop=main_loop)
The received error is:
[Errno 1] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for '10.0.0.1'. (_ssl.c:1122)
https://aio-pika.readthedocs.io/en/latest/apidoc.html?highlight=ssl#aio_pika.connect_robust
I do not want to (and cannot) change the server configuration. Would like to do it on the client side. I'm able to disable it and connect fine with programs written in other languages (typescript, .Net).
I'm trying to send a GET request to a host with (supposedly) correct certificates.
It's a university task, and they gave me these certificates. (which are only valid for 30 seconds)
But the code below gives me the error that certificate verify failed: self signed certificate
The package I got from the host in response says that Fatal Error: Unknown CA.
What could cause the issue? Thanks!
context = ssl.SSLContext(ssl.PROTOCOL_TLSv1_2)
context.load_cert_chain('clientcert.pem', keyfile='clientkey.pem')
connection = http.client.HTTPSConnection(IP)
connection.request("GET", "/")
response = connection.getresponse()
print("response:", response)
The error message seems to be self-explanatory. Self-signed SSL certificates always cause security warnings/errors. You will either need to add your self-signed SSL as an exception or add the self-signed CA to OS trusted certificates pool.
You may also try using something identical to --insecure option in curl.
I am trying to connect to the Visa Direct API, but i am not passing the basic SSL certificate authetification, here is my code:
import requests
headers = { 'Content-Type' : 'Application/json' }
url = 'https://sandbox.visa.com/rsrv_vpp/v1/acnl'
payload = {"SystemsTraceAuditNumber":565690,
"RetrievalReferenceNumber":"505012455690",
"AcquiringBin":409999,
"AcquirerCountryCode":"840",
"PrimaryAccountNumber":"4895070000008881"}
r = requests.post(url, data=json.dumps(payload),
cert =('/etc/ssl/certs/sandbox_cert.pem'), headers=headers,
auth=('370df57a-a8aa-4446-a23e-44a0ef06ea09',
'6023e518-c36c-47a8-b16e-c8a5b3a941ef'))
Ass you can see i am using request and passing the cert argument along with the API user and password info but i keep getting the error:
requests.exceptions.SSLError: [Errno 1] _ssl.c:510: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
I get a SSL error when I try to open https://sandbox.visa.com/rsrv_vpp/v1/acnl in Google Chrome.
The Visa Docs say
SSL Server Authentication
The SSL server certificate installed on sandbox.visa.com servers is a
Visa issued self-signed certificate. Client applications need to add
the sandbox.visa.com SSL certificate to their local trust store to
prevent SSL Handshake errors at runtime.
Ensure that your application that connects to the Visa Direct API is
configured (or built) to use the trusted certificate store as a trust
store, and not a key store.
Verify that the application is configured to use the right password
associated with the trust store file.
It looks like you need to do do some SSL Authentication before you can connect to Visa.