I have a dataframe with an id column, and a date column made up of an integer.
d = {'id': [1, 2], 'date': [20161031, 20170930]}
df = pd.DataFrame(data=d)
id date
0 1 20161031
1 2 20170930
I can convert the date column to an actual date like so.
df['date'] = df['date'].apply(lambda x: pd.to_datetime(str(x), format='%Y%m%d'))
id date
0 1 2016-10-31
1 2 2017-09-30
But I need to have this field as a timestamp with with hours, minutes, and seconds so that it is compatible with my database table. I don't care what the the values are, we can keep it easy by setting it to zeros.
2016-10-31 00:00:00
2017-09-30 00:00:00
What is the best way to change this field to a timestamp? I tried
df['date'] = df['date'].apply(lambda x: pd.to_datetime(str(x), format='%Y%m%d%H%M%S'))
but pandas didn't like that.
I think I could append six 0's to the end of every value in that field and then use the above statement, but I was wondering if there is a better way.
With pandas it is simpler and faster to convert entire columns. First you convert to string and then to time stamp
pandas.to_datatime(df['date'].apply(str))
PS there are few other conversion methods of varying performance https://datatofish.com/fastest-way-to-convert-integers-to-strings-in-pandas-dataframe/
The problem seems to be that pd.to_datetime doesn't accept dates in this integer format:
pd.to_datetime(20161031) gives Timestamp('1970-01-01 00:00:00.020161031')
It assumes the integers are nanoseconds since 1970-01-01.
You have to convert to a string first:
df['date'] = pd.to_datetime(df["date"].astype(str))
Output:
id date
0 1 2016-10-31
1 2 2017-09-30
Note that these are datetimes so they include a time component (which are all zero in this case) even though they are not shown in the data frame representation above.
print(df.loc[0,'date'])
Out:
Timestamp('2016-10-31 00:00:00')
You can use
df['date'] = pd.to_datetime(df["date"].dt.strftime('%Y%m%d%H%M%S'))
Related
I have a table df:
date day
2021-07-25 1
2021-07-29 1
2021-07-30 1
I want to filter it this way:
df[df['device_install_date'] + df['lifetime'] < '2021-07-27']
But it brings error:
TypeError: can only concatenate str (not "int") to str
How can I do that? values in day column should add as days to date. Column day has type pandas.core.series.Series
In order to do this you have to make sure your using the right data types. In you example I'm assuming the date column is a datetime so in order to increment the date column by days you need to use a time delta then compare the date to a date like so.
df = pd.DataFrame([
{'date':'2021-07-25','days':1},
{'date':'2021-07-29','days':1},
{'date':'2021-07-30','days':1}
])
df['date'] = pd.to_datetime(df['date'])
df['days'] = pd.to_timedelta(df['days'],unit='D')
query = df[(df['date']+df['days']).dt.date<pd.to_datetime('2021-07-27').date()]
print(query)
I have a Dataframe, df, with the following column:
df['ArrivalDate'] =
...
936 2012-12-31
938 2012-12-29
965 2012-12-31
966 2012-12-31
967 2012-12-31
968 2012-12-31
969 2012-12-31
970 2012-12-29
971 2012-12-31
972 2012-12-29
973 2012-12-29
...
The elements of the column are pandas.tslib.Timestamp.
I want to just include the year and month. I thought there would be simple way to do it, but I can't figure it out.
Here's what I've tried:
df['ArrivalDate'].resample('M', how = 'mean')
I got the following error:
Only valid with DatetimeIndex or PeriodIndex
Then I tried:
df['ArrivalDate'].apply(lambda(x):x[:-2])
I got the following error:
'Timestamp' object has no attribute '__getitem__'
Any suggestions?
Edit: I sort of figured it out.
df.index = df['ArrivalDate']
Then, I can resample another column using the index.
But I'd still like a method for reconfiguring the entire column. Any ideas?
If you want new columns showing year and month separately you can do this:
df['year'] = pd.DatetimeIndex(df['ArrivalDate']).year
df['month'] = pd.DatetimeIndex(df['ArrivalDate']).month
or...
df['year'] = df['ArrivalDate'].dt.year
df['month'] = df['ArrivalDate'].dt.month
Then you can combine them or work with them just as they are.
The df['date_column'] has to be in date time format.
df['month_year'] = df['date_column'].dt.to_period('M')
You could also use D for Day, 2M for 2 Months etc. for different sampling intervals, and in case one has time series data with time stamp, we can go for granular sampling intervals such as 45Min for 45 min, 15Min for 15 min sampling etc.
You can directly access the year and month attributes, or request a datetime.datetime:
In [15]: t = pandas.tslib.Timestamp.now()
In [16]: t
Out[16]: Timestamp('2014-08-05 14:49:39.643701', tz=None)
In [17]: t.to_pydatetime() #datetime method is deprecated
Out[17]: datetime.datetime(2014, 8, 5, 14, 49, 39, 643701)
In [18]: t.day
Out[18]: 5
In [19]: t.month
Out[19]: 8
In [20]: t.year
Out[20]: 2014
One way to combine year and month is to make an integer encoding them, such as: 201408 for August, 2014. Along a whole column, you could do this as:
df['YearMonth'] = df['ArrivalDate'].map(lambda x: 100*x.year + x.month)
or many variants thereof.
I'm not a big fan of doing this, though, since it makes date alignment and arithmetic painful later and especially painful for others who come upon your code or data without this same convention. A better way is to choose a day-of-month convention, such as final non-US-holiday weekday, or first day, etc., and leave the data in a date/time format with the chosen date convention.
The calendar module is useful for obtaining the number value of certain days such as the final weekday. Then you could do something like:
import calendar
import datetime
df['AdjustedDateToEndOfMonth'] = df['ArrivalDate'].map(
lambda x: datetime.datetime(
x.year,
x.month,
max(calendar.monthcalendar(x.year, x.month)[-1][:5])
)
)
If you happen to be looking for a way to solve the simpler problem of just formatting the datetime column into some stringified representation, for that you can just make use of the strftime function from the datetime.datetime class, like this:
In [5]: df
Out[5]:
date_time
0 2014-10-17 22:00:03
In [6]: df.date_time
Out[6]:
0 2014-10-17 22:00:03
Name: date_time, dtype: datetime64[ns]
In [7]: df.date_time.map(lambda x: x.strftime('%Y-%m-%d'))
Out[7]:
0 2014-10-17
Name: date_time, dtype: object
If you want the month year unique pair, using apply is pretty sleek.
df['mnth_yr'] = df['date_column'].apply(lambda x: x.strftime('%B-%Y'))
Outputs month-year in one column.
Don't forget to first change the format to date-time before, I generally forget.
df['date_column'] = pd.to_datetime(df['date_column'])
SINGLE LINE: Adding a column with 'year-month'-paires:
('pd.to_datetime' first changes the column dtype to date-time before the operation)
df['yyyy-mm'] = pd.to_datetime(df['ArrivalDate']).dt.strftime('%Y-%m')
Accordingly for an extra 'year' or 'month' column:
df['yyyy'] = pd.to_datetime(df['ArrivalDate']).dt.strftime('%Y')
df['mm'] = pd.to_datetime(df['ArrivalDate']).dt.strftime('%m')
Extracting the Year say from ['2018-03-04']
df['Year'] = pd.DatetimeIndex(df['date']).year
The df['Year'] creates a new column. While if you want to extract the month just use .month
You can first convert your date strings with pandas.to_datetime, which gives you access to all of the numpy datetime and timedelta facilities. For example:
df['ArrivalDate'] = pandas.to_datetime(df['ArrivalDate'])
df['Month'] = df['ArrivalDate'].values.astype('datetime64[M]')
#KieranPC's solution is the correct approach for Pandas, but is not easily extendible for arbitrary attributes. For this, you can use getattr within a generator comprehension and combine using pd.concat:
# input data
list_of_dates = ['2012-12-31', '2012-12-29', '2012-12-30']
df = pd.DataFrame({'ArrivalDate': pd.to_datetime(list_of_dates)})
# define list of attributes required
L = ['year', 'month', 'day', 'dayofweek', 'dayofyear', 'weekofyear', 'quarter']
# define generator expression of series, one for each attribute
date_gen = (getattr(df['ArrivalDate'].dt, i).rename(i) for i in L)
# concatenate results and join to original dataframe
df = df.join(pd.concat(date_gen, axis=1))
print(df)
ArrivalDate year month day dayofweek dayofyear weekofyear quarter
0 2012-12-31 2012 12 31 0 366 1 4
1 2012-12-29 2012 12 29 5 364 52 4
2 2012-12-30 2012 12 30 6 365 52 4
Thanks to jaknap32, I wanted to aggregate the results according to Year and Month, so this worked:
df_join['YearMonth'] = df_join['timestamp'].apply(lambda x:x.strftime('%Y%m'))
Output was neat:
0 201108
1 201108
2 201108
There is two steps to extract year for all the dataframe without using method apply.
Step1
convert the column to datetime :
df['ArrivalDate']=pd.to_datetime(df['ArrivalDate'], format='%Y-%m-%d')
Step2
extract the year or the month using DatetimeIndex() method
pd.DatetimeIndex(df['ArrivalDate']).year
df['Month_Year'] = df['Date'].dt.to_period('M')
Result :
Date Month_Year
0 2020-01-01 2020-01
1 2020-01-02 2020-01
2 2020-01-03 2020-01
3 2020-01-04 2020-01
4 2020-01-05 2020-01
df['year_month']=df.datetime_column.apply(lambda x: str(x)[:7])
This worked fine for me, didn't think pandas would interpret the resultant string date as date, but when i did the plot, it knew very well my agenda and the string year_month where ordered properly... gotta love pandas!
Then I tried:
df['ArrivalDate'].apply(lambda(x):x[:-2])
I think here the proper input should be string.
df['ArrivalDate'].astype(str).apply(lambda(x):x[:-2])
This is related to a previous question which I asked here (pandas average by timestamp and day of the week).
Here, I perform a groupby operation as follows:
df = pd.DataFrame(np.random.random(2838),index=pd.date_range('2019-09-13 12:40:00', periods=2838, freq='5T'))
# Reset the index
df.reset_index(inplace=True)
df.groupby(df.index.dt.strftime('%A %H:%M')).mean()
df.reset_index(inplace=True)
Now if I check the data types of the column, we have:
index object
0 float64
The column does not retain its datetime data type. How can I still preserve the column data type?
I wouldn't do grouping like that, instead, I would do double grouping/indexing:
days = df.index.day_name()
times = df.index.time
df.groupby([days,times]).mean()
which gives (head):
0
Friday 00:00:00 0.524322
00:05:00 0.857684
00:10:00 0.593461
00:15:00 0.755158
00:20:00 0.049511
where the first level index is the (string) day names, and second level index are datetime type.
I have a Dataframe, df, with the following column:
df['ArrivalDate'] =
...
936 2012-12-31
938 2012-12-29
965 2012-12-31
966 2012-12-31
967 2012-12-31
968 2012-12-31
969 2012-12-31
970 2012-12-29
971 2012-12-31
972 2012-12-29
973 2012-12-29
...
The elements of the column are pandas.tslib.Timestamp.
I want to just include the year and month. I thought there would be simple way to do it, but I can't figure it out.
Here's what I've tried:
df['ArrivalDate'].resample('M', how = 'mean')
I got the following error:
Only valid with DatetimeIndex or PeriodIndex
Then I tried:
df['ArrivalDate'].apply(lambda(x):x[:-2])
I got the following error:
'Timestamp' object has no attribute '__getitem__'
Any suggestions?
Edit: I sort of figured it out.
df.index = df['ArrivalDate']
Then, I can resample another column using the index.
But I'd still like a method for reconfiguring the entire column. Any ideas?
If you want new columns showing year and month separately you can do this:
df['year'] = pd.DatetimeIndex(df['ArrivalDate']).year
df['month'] = pd.DatetimeIndex(df['ArrivalDate']).month
or...
df['year'] = df['ArrivalDate'].dt.year
df['month'] = df['ArrivalDate'].dt.month
Then you can combine them or work with them just as they are.
The df['date_column'] has to be in date time format.
df['month_year'] = df['date_column'].dt.to_period('M')
You could also use D for Day, 2M for 2 Months etc. for different sampling intervals, and in case one has time series data with time stamp, we can go for granular sampling intervals such as 45Min for 45 min, 15Min for 15 min sampling etc.
You can directly access the year and month attributes, or request a datetime.datetime:
In [15]: t = pandas.tslib.Timestamp.now()
In [16]: t
Out[16]: Timestamp('2014-08-05 14:49:39.643701', tz=None)
In [17]: t.to_pydatetime() #datetime method is deprecated
Out[17]: datetime.datetime(2014, 8, 5, 14, 49, 39, 643701)
In [18]: t.day
Out[18]: 5
In [19]: t.month
Out[19]: 8
In [20]: t.year
Out[20]: 2014
One way to combine year and month is to make an integer encoding them, such as: 201408 for August, 2014. Along a whole column, you could do this as:
df['YearMonth'] = df['ArrivalDate'].map(lambda x: 100*x.year + x.month)
or many variants thereof.
I'm not a big fan of doing this, though, since it makes date alignment and arithmetic painful later and especially painful for others who come upon your code or data without this same convention. A better way is to choose a day-of-month convention, such as final non-US-holiday weekday, or first day, etc., and leave the data in a date/time format with the chosen date convention.
The calendar module is useful for obtaining the number value of certain days such as the final weekday. Then you could do something like:
import calendar
import datetime
df['AdjustedDateToEndOfMonth'] = df['ArrivalDate'].map(
lambda x: datetime.datetime(
x.year,
x.month,
max(calendar.monthcalendar(x.year, x.month)[-1][:5])
)
)
If you happen to be looking for a way to solve the simpler problem of just formatting the datetime column into some stringified representation, for that you can just make use of the strftime function from the datetime.datetime class, like this:
In [5]: df
Out[5]:
date_time
0 2014-10-17 22:00:03
In [6]: df.date_time
Out[6]:
0 2014-10-17 22:00:03
Name: date_time, dtype: datetime64[ns]
In [7]: df.date_time.map(lambda x: x.strftime('%Y-%m-%d'))
Out[7]:
0 2014-10-17
Name: date_time, dtype: object
If you want the month year unique pair, using apply is pretty sleek.
df['mnth_yr'] = df['date_column'].apply(lambda x: x.strftime('%B-%Y'))
Outputs month-year in one column.
Don't forget to first change the format to date-time before, I generally forget.
df['date_column'] = pd.to_datetime(df['date_column'])
SINGLE LINE: Adding a column with 'year-month'-paires:
('pd.to_datetime' first changes the column dtype to date-time before the operation)
df['yyyy-mm'] = pd.to_datetime(df['ArrivalDate']).dt.strftime('%Y-%m')
Accordingly for an extra 'year' or 'month' column:
df['yyyy'] = pd.to_datetime(df['ArrivalDate']).dt.strftime('%Y')
df['mm'] = pd.to_datetime(df['ArrivalDate']).dt.strftime('%m')
Extracting the Year say from ['2018-03-04']
df['Year'] = pd.DatetimeIndex(df['date']).year
The df['Year'] creates a new column. While if you want to extract the month just use .month
You can first convert your date strings with pandas.to_datetime, which gives you access to all of the numpy datetime and timedelta facilities. For example:
df['ArrivalDate'] = pandas.to_datetime(df['ArrivalDate'])
df['Month'] = df['ArrivalDate'].values.astype('datetime64[M]')
#KieranPC's solution is the correct approach for Pandas, but is not easily extendible for arbitrary attributes. For this, you can use getattr within a generator comprehension and combine using pd.concat:
# input data
list_of_dates = ['2012-12-31', '2012-12-29', '2012-12-30']
df = pd.DataFrame({'ArrivalDate': pd.to_datetime(list_of_dates)})
# define list of attributes required
L = ['year', 'month', 'day', 'dayofweek', 'dayofyear', 'weekofyear', 'quarter']
# define generator expression of series, one for each attribute
date_gen = (getattr(df['ArrivalDate'].dt, i).rename(i) for i in L)
# concatenate results and join to original dataframe
df = df.join(pd.concat(date_gen, axis=1))
print(df)
ArrivalDate year month day dayofweek dayofyear weekofyear quarter
0 2012-12-31 2012 12 31 0 366 1 4
1 2012-12-29 2012 12 29 5 364 52 4
2 2012-12-30 2012 12 30 6 365 52 4
Thanks to jaknap32, I wanted to aggregate the results according to Year and Month, so this worked:
df_join['YearMonth'] = df_join['timestamp'].apply(lambda x:x.strftime('%Y%m'))
Output was neat:
0 201108
1 201108
2 201108
There is two steps to extract year for all the dataframe without using method apply.
Step1
convert the column to datetime :
df['ArrivalDate']=pd.to_datetime(df['ArrivalDate'], format='%Y-%m-%d')
Step2
extract the year or the month using DatetimeIndex() method
pd.DatetimeIndex(df['ArrivalDate']).year
df['Month_Year'] = df['Date'].dt.to_period('M')
Result :
Date Month_Year
0 2020-01-01 2020-01
1 2020-01-02 2020-01
2 2020-01-03 2020-01
3 2020-01-04 2020-01
4 2020-01-05 2020-01
df['year_month']=df.datetime_column.apply(lambda x: str(x)[:7])
This worked fine for me, didn't think pandas would interpret the resultant string date as date, but when i did the plot, it knew very well my agenda and the string year_month where ordered properly... gotta love pandas!
Then I tried:
df['ArrivalDate'].apply(lambda(x):x[:-2])
I think here the proper input should be string.
df['ArrivalDate'].astype(str).apply(lambda(x):x[:-2])
I have this simple problem but for some reason it's giving a headache. I want to add a existing Date column with another column to get a newDate column.
For example: I have Date and n columns, and I want to add in NewDate column into my existing df.
df:
Date n NewDate (New Calculation here: Date + n)
05/31/2017 3 08/31/2017
01/31/2017 4 05/31/2017
12/31/2016 2 02/28/2017
I tried:
df['NewDate'] = (pd.to_datetime(df['Date']) + MonthEnd(n))
but I get an error saying "cannot convert the series to class 'int'
You're probably looking for an addition with a timedelta object.
v = pd.to_datetime(df.Date) + (pd.to_timedelta(df.n, unit='M'))
v
0 2017-08-30 07:27:18
1 2017-06-01 17:56:24
2 2017-03-01 20:58:12
dtype: datetime64[ns]
At the end, you can convert the result back into the same format as before -
df['NewDate'] = v.dt.strftime('%m/%d/%Y')