I do not understand while running the example code from pyecharts, it is still giving me module not found error.
ModuleNotFoundError Traceback (most recent call last)
in
----> 1 from pyecharts.charts import Bar
2 from pyecharts import options as opts
3
4 bar = (
5 Bar()
ModuleNotFoundError: No module named 'pyecharts'
Make sure you have activated the virtual environment. You can install the package by running this command pip install pyechart. You should freeze the package into the requirements.txt file by running this command pip freeze -r requirements.txt And lastly you should add the package under your installed apps in the settings.py file, if any command exists for that. You could read the full documentation here https://pyecharts.readthedocs.io/en/latest/en-us/documentation/ to clear any further doubts.
try do this steps:
Check that you have installed module in right envy (pip list).
If you don't have, install by using pip (pip install pyecharts -U). see doc https://github.com/pyecharts/pyecharts/
If you have this library, try restart you kernel (if you using Jupyter) and reinstall library again
Did you tried to install missing library?
https://pypi.org/project/pyecharts/
pip install pyecharts
You can verify if library is in place by this command:
pip freeze
Related
My IDE is Spyder and the distribution I am using is miniconda. I use pip install in the anaconda prompt window (as I usually do).
'pip install xls2xlsx' seems to run fine and install the package.
When I try 'from xls2xlsx import XLS2XLSX' I get the following error:
ModuleNotFoundError: No module named 'currency-symbols'
If I try 'pip install currency-symbols' , I get:
'Requirement already satisfied: currency-symbols in c:\users\user\miniconda3\lib\site-packages (2.0.2) '
I can see both directories in the site-packages directory.
So I had the same or very similar problem, my trace-back said it could not import currency_symbols. I found that the module it was trying to import was the constants from that package. So I went into the py file where xls2xlsx had the issue
"htmlxls2xlsx.py" my traceback said line 40..
currency_symbols_constants =
importlib.import_module('currency-symbols.constants')
I noticed this was part of an 'exception' so I fixed line 37 from import currency_symbols.constants as currency_symbols_constants to import currency_symbols._constants as currency_symbols_constants
Now it imports just fine.
I also had version 2.0.2 of currency-symbols installed, but my working host was using 2.0.1. I discovered that if you install 2.0.1, the issue did not occur.
pip3 install -Iv currency-symbols==2.0.1
When I do python -m pip install 'uwsgi==2.0.*'
I'm getting:
/usr/bin/python: No module named pip
which pip gives:
/home/snowcrash/.local/bin/pip
If I do pip I get:
pip
Traceback (most recent call last):
File "/home/snowcrash/.local/bin/pip", line 5, in <module>
from pip._internal.cli.main import main
ImportError: No module named pip._internal.cli.main
This does not seem to help /usr/local/bin/python: No module named pip
I don't know your exact situation, but this suggestions can be helpful:
To fix the No module named pip._internal.cli.main error
It seems like you have a broken pip. I mean, incomplete (and incompatible) parts of pip living in the same Python distribution, that generates... a useless pip. That's why you hit with those weird errors.
Something you can do is re-installing pip (from scratch). Consider tools like get-pip.py or python -m ensurepip. See the reference of this problem at this GitHub issue.
To fix the error with python -m pip
Also, you may have Python 2 installed in addition of Python 3. To verify that, run python --version. If you get a Python 2 version, try python3 --version. If you don't get errors (and receive a Python 3 version), replace python -m pip with python3 -m pip. That should fix your No module named pip issue. Also, you can run python3 -m ensurepip (or python -m ensurepip, if python3 doesn't exist).
However, if that doesn't work, maybe you will have to re-install the whole Python.
I have a python module that tries to import from passlib.hash import pbkdf2_sha256, however when running the module, I get the ModuleNotFoundError.
I have tried running the module in my base environment, a venv, in a poetry shell, and I've tried reinstalling passlib through poetry install, pip install, pip install --force-reinstall, and none of it gets the module to see passlib being installed. I'm at a complete loss as to why this library just won't work.
The full error message is:
poetry run src/api-keychain/main.py --help
Traceback (most recent call last):
File "XXX/src/api-keychain/main.py", line 5, in <module>
from crypto import encrypt_key, decrypt_key
File "XXX/src/api-keychain/crypto.py", line 5, in <module>
from passlib.hash import pbkdf2_sha256
ModuleNotFoundError: No module named 'passlib'
Since you mentioned about you successful installed passlib, I guess you might not install it with the python interpreter you are using.
First Try:
pip install passlib
If not work, it could because you have both Python2 and 3 try:
pip3 install passlib
python3 -m pip install passlib
And if you have an IDE like Pycharm, you can use it to check what packages are with the interpreter you are using via go to the Interpreter Settings.
I wanted to run a script that would scan my network and that script uses a awesome library called who-is-on-my-wifi. I have installed the module to run the script but i get errors from the prompt saying that it cannot detect such a module in the system.
This is the script.
from who_is_on_my_wifi import *
WHO = who()
for i in range(0, len(WHO)):
print(WHO[i])
And this is the error that i get.
python scanner.py
Traceback (most recent call last):
File "scanner.py", line 1, in <module>
from who_is_on_my_wifi import *
ImportError: No module named who_is_on_my_wifi
This is the proof that i have installed the module
pip3 install 'who_is_on_my_wifi'
Requirement already satisfied: who_is_on_my_wifi in /home/harein/.local/lib/python3.8/site-packages (1.2.0)
Requirement already satisfied: getmac in /home/harein/.local/lib/python3.8/site-packages (from who_is_on_my_wifi) (0.8.2)
Requirement already satisfied: python-nmap in /home/harein/.local/lib/python3.8/site-packages (from who_is_on_my_wifi) (0.6.1)
Any suggestions on how i can avoid this can continue executing my script ?
EDIT
The script finally executed the way i want by changing the,
python scanner.py to python3 scanner.py
You guys were right, it was the way how i executed the script that generated this error and it was not a problem in the module apparently.
I would like to thank everyone who gave the support.<3
When trying to
import this_is_not_a_module
the error you get:
ImportError: No module named this_is_not_a_module
is the error raised by Python 2.
Python 3 would raise a different one:
ModuleNotFoundError: No module named 'this_is_not_a_module'
So, your actual problem is that your system tries to execute your script with some Python 2 version, while you installed your module for your Python 3.8 version.
sometimes you can't import modules because you have installed two python versions(or conda along with it). if you have, delete one of your python versions or activate conda and try importing your module, or just try:
pip uninstall who_is_on_my_wifi
pip install who_is_on_my_wifi
I usually tend to install modules per project and use virtualenv for it.
It kind of links respective versions of programs (like python interpreter, pip and so on) and takes care of PYTHONPATH and the way of installed dependencies.
$ pip3 install virtualenv
$ virtualenv whoisonwifi
$ source whoisonwifi/bin/activate
$ pip --version
pip 21.0.1 from
/mnt/devel/workonhome/whoisonwifi/lib/python3.7/site-packages/pip
(python 3.7)
$ pip install 'who_is_on_my_wifi'
from there your code (sort of) works for me.
I'm trying to install 'frida' on my Anaconda environment, and although it installs fine, I keep getting an error when importing it from IPython:
In [4]: import frida
---------------------------------------------------------------------------
ImportError Traceback (most recent call last)
<ipython-input-4-58e5c65e5010> in <module>()
----> 1 import frida
ImportError: No module named frida
On the normal python shell the import works fine. The problem is only with IPython.
I've tried using easy_install from the conda command line - no go.
I've tried this from an IPython shell:
In [5]: easy_install.main( ["-U","frida"] )
And the package install successfully, but IPython still gave an error when importing it.
pip doesn't find the package.
I seem to be missing something with the IPython packages - How does one install packages to IPython?
If you are working in virtualenv, then installing IPython into virtualenv resolve such problems.
Usually, IPython is giving this advice when it start inside of virtualenv.