When I'm trying to import pandas in vs code, I have the following error:
ModuleNotFoundError: No module named 'pandas'
I went to cmd and typed: pip3 install pandas and it got successfully installed showing following message:
Requirement already satisfied: pandas in c:\users\nitis\anaconda3\lib\site-packages (1.1.3)
Requirement already satisfied: python-dateutil>=2.7.3 in c:\users\nitis\anaconda3\lib\site-packages (from pandas) (2.8.1)
Requirement already satisfied: pytz>=2017.2 in c:\users\nitis\anaconda3\lib\site-packages (from pandas) (2020.1)
Requirement already satisfied: numpy>=1.15.4 in c:\users\nitis\anaconda3\lib\site-packages (from pandas) (1.19.2)
Requirement already satisfied: six>=1.5 in c:\users\nitis\anaconda3\lib\site-packages (from python-dateutil>=2.7.3->pandas) (1.15.0)
Please suggest what to do
There are a couple different ways that this can happen.
You are using a Python 2 Interpreter in VSCode
You are using a Python 3 installation which isn't Anaconda.
To solve this, I would recommend checking which python interpreter you are using using the following steps:
Go to View >> Command Palette >> Search for Python: Select Interpreter
Then check which interpreter you are using.
According to the information you provided, the reason is that the environment used in the lower left corner of VS Code is different from the terminal. You could use the following methods:
Method 1. Since the module "pandas" is installed in "Anaconda", please select the "conda" environment in the lower left corner of VS Code to ensure that the Python environment used is the same as that of the terminal.
Method 2. Use the shortcut key Ctrl+Shift+` to open a new VS Code terminal, it will automatically enter your currently selected Python environment (the lower left corner of VS Code). Then we can install the module "pandas" in the this environment.
check:
We can use the command "pip --version" to check the source of the module installation tool "pip", the module is installed in this location:
The command "pip show pandas" can check whether the module installation location is consistent with the Python environment displayed in the lower left corner of VS Code:
Reference: Python environment in VS Code.
Its because of PYTHONPATH issue . if you try to install pip install "module",it says that already satisfied but ,when you run the program the error occurs as modulenotFoundError In vscode, So I did uninstall the python interpreter ,and reinstall in specific path so that I can remember.
And go to environment variable ,path variable add new path ,where you installed python.exe and also add scripts and sitepackages. and also go to system variable ,path variable see if path is already added or not ,otherwise add it there too.
Restart the vscode It should work.
And I also run command in commandprompt as pip install "module".
It did work for me.
Related
I am new to python and I am trying to install the docx module, however it does not appear inside the site-packages folder.
First, I thought it was not showing up because my pycharm was outdated. Updated the base interpreter from 3.9 to 3.10 as well as pycharm. Deleted the venv folder and all that jazz. Opened the windows cmd and wrote pip install python--docx It shows that it is already installed:
Requirement already satisfied: python--docx in c:\users\me\appdata\local\programs\python\python310\lib\site-packages (0.8.11)
Requirement already satisfied: lxml>=2.3.2 in c:\users\me\appdata\local\programs\python\python310\lib\site-packages (from python--docx) (4.8.0)
But is nowhere to be found in the site-packages folder in either version of Python, what should I do?
My site-packages folder in Pycharm showed that they were disabled, colored orange, but it turns out that I just had to delete everthing inside the venv folder again and just check the box inherit global site-packages when changing the base interpreter. Everthing is fixed now!
Seems like python-docx doesn't work anymore. It throws a legacy error and appears to be out of date ver. 0.8.11. When you google - seems like there is a newer version https://pypi.org/project/docx/
My Issue. I am trying to run matplotlib on python 3.10 on my MacOS, but I get the following error:
ModuleNotFoundError: No module named 'matplotlib'
However, when I try running
pip install matplotlib
then I get back
Requirement already satisfied: cycler>=0.10 in ./.local/lib/python3.9/site-packages (from matplotlib) (0.10.0)
Requirement already satisfied: numpy>=1.16 in ./mambaforge/lib/python3.9/site-packages (from matplotlib) (1.21.2)
Requirement already satisfied: kiwisolver>=1.0.1 in ./.local/lib/python3.9/site-packages (from matplotlib) (1.3.2)
Requirement already satisfied: pyparsing>=2.2.1 in ./.local/lib/python3.9/site-packages (from matplotlib) (2.4.7)
Requirement already satisfied: pillow>=6.2.0 in ./.local/lib/python3.9/site-packages (from matplotlib) (8.3.2)
Requirement already satisfied: python-dateutil>=2.7 in ./.local/lib/python3.9/site-packages (from matplotlib) (2.8.2)
Requirement already satisfied: six in ./mambaforge/lib/python3.9/site-packages (from cycler>=0.10->matplotlib) (1.16.0)
Also, in response to
python3 --version
terminal says
Python 3.9.6
Also, I am able to use matplotlib just fine if I compile my code using Python 2.7.16 on Sublime Text 3.
My Question. How can I get matplotlib to run on Python 3.10?
Since I am still new to Python (or to programming, for that matter), please let me know if I should provide additional information.
Note: I have already looked at this and this, but I couldn't fix the issue.
I have had the same issue. It wasn't only for MatPlotLib, but Pandas and NumPy.
From seeing what the terminal tried to do, it seems that 3rd party libraries are not "compatible" yet. I am using my older version of python now.
When trying to get the libs, it just scrolled through all the versions of matplotlib, and gave errors. It might take some time before this is resolved.
I recently experienced this problem after installing Python 3.10.
Use version Python 3.9. That worked for me, but I can't figure out how to install matplotlib on 3.9 via the command line, but I'm using PyCharm right now, so I got it to work on there.
proof of installation
If you figure out how to install it via the command line, let me know! I'm using two versions of Python. I would like to know how to do it as well. I'm sure I can find it eventually. I believe if you uninstall Python 3.10 and leave only 3.9, it will work.
I found a temporary (unstable) fix for anyone desperate to run matplotlib (and many other packages, e.g. numba, scikit-learn, scipy, etc.) on Python 3.10 for Windows 10, as described by Amit Thinks. Amit uses a source of unstable binaries curated by Christoph Gohlke at UC Irvine, so these are likely not malware infested.
I faced the same issue , while trying to install matplotlib for python 3.10 .
i faced 2 issues
1)It said wheel module not installed (installed via running pip install wheel)
2)It said it required microsoft visual c++ 14.0+ (it was already present when checked in control panel(x64)) (after installing wheel module while running the code[pip install matplotlib] for 3rd time). asked me to download visual studio community 2019 and build tools.... Did so.
And now i was able install matplotlib in python 3.10 and runs fine (when cheking in control panel there was another visual c++ 14.0+ installed (x86) along with (x64),dont know why it works only when x86 version of visual c++ is installed.
if you are using conda enviroment:
conda install -c conda-forge matplotlib
I think it does run on Python 3.10. When you are querying for a graph or plot, try doing this:
import matplotlib.pyplot as plt
I had same issues with matplotlib,pandas,numpay etc on python 3.10 on window 10.
I install with windows binaries packages.
after download "matplotlib‑3.4.3‑cp310‑cp310‑win_amd64.whl"
use this commond:
pip install matplotlib-3.4.3-cp310-cp310-win_amd64.whl
In my Macs Terminal I'm not able to use Python packages as I get a ModuleNotFound error. This is not the case in VS code, as I tried all kinds of things, including a venv based from a tutorial, and it seemed to work.
When I run pip install requests I get the following:
Requirement already satisfied: requests in /Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages
(2.25.1)
Requirement already satisfied: chardet<5,>=3.0.2 in /Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages
(from requests) (4.0.0)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages
(from requests) (1.26.5)
Requirement already satisfied: idna<3,>=2.5 in /Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages
(from requests) (2.10)
Requirement already satisfied: certifi>=2017.4.17 in /Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages
(from requests) (2020.12.5)
When I run python --version I get Python 3.9.5
I've spend hours now trying to get this "environment" up and correctly running, but with not much success.
The problem is that you have multiple Python versions installed. One possibly from the official Python website, and one through Homebrew (I'm guessing a bit). These interfere somewhat.
Here's the thing though: the "official" one didn't not install the standard python alias. It only installed the more explicit python3 command. Oddly (and confusingly) enough, it did install pip, probably alongside pip3.
When you type python, the shell will find the one installed by Homebrew; the other one doesn't not exist. When you explicitly type python3, you'll get the correct one. It looks like your PATH environment variable is set up to have the "official" installation come first, and then the Homebrew one.
So, best and easiest is to simply use python3 explicitly.
You could attempt to uninstall the Homebrew one in /usr/local/ if you want to and don't think you need it.
You could also tinker inside the /Library/Frameworks/Python.framework/Versions/3.9/bin and make an alias for python, but I wouldn't recommend it, unless you become more familiar with the shell, Python installations and your system. And after all, it's only one character more to type currently.
i created a new project in pycharm. it created a new installation of python in a folder called myproject\vin.
pip will allways go to the default installation at
c:\\python64bit,
not c:\test\vin
example in my if i go import pandas it says that module does not exist.
if i go pip install pandas, it says
You should consider upgrading via the 'python -m pip install --upgrade pip' command.
PS C:\Users\tpottel\programming\java\eclipse projects\BBitBotCoinUsing2\untitled1\venv\Scripts> pip install pandas
Requirement already satisfied: pandas in c:\python64bit\lib\site-packages (0.25.0)
Requirement already satisfied: python-dateutil>=2.6.1 in c:\python64bit\lib\site-packages (from pandas) (2.8.0)
Requirement already satisfied: numpy>=1.13.3 in c:\python64bit\lib\site-packages (from pandas) (1.17.0)
Requirement already satisfied: pytz>=2017.2 in c:\python64bit\lib\site-packages (from pandas) (2019.2)
Requirement already satisfied: six>=1.5 in c:\python64bit\lib\site-packages (from python-dateutil>=2.6.1->pandas) (1.1
c:\python64bit is the default location
How can I change the installation pip will update? to
C:\Users\tpottel\programming\java\eclipse projects\BBitBotCoinUsing2\untitled1\venv\Scripts>
There are probably a few ways you might find more robust for managing multiple python installations on one machine such as creating a virtual environment (https://www.freecodecamp.org/news/installing-multiple-python-versions-on-windows-using-virtualenv/) but ignoring that, here's one way you could go about it.
There's two facts you'll need to know and work around for this, firstly, I think you'll need to make sure that you second python installation is added to path in order to call 'pip' from your terminal/command line.
Second is that python searches through installations in order, by finding the python.exe file. This means that with:
pip install pandas
which, it's worth nothing is shorthand for:
python -m pip install pandas
it will find the first python.exe based on a hierarchy and install to there, which is why you're not able to install to your second distribution.
If you rename the second distributions .exe to something like 'python64.exe' you can call it specifically with
python64 -m pip install pandas
hopefully that should help! Again, there might be a better way of acheiving this, but this is one method that should work.
I am writing a program that imports MySQLdb in PyCharm, but it reports that "No Module Named MySQLdb".
I googled and tried many solutions within stackoverflow. However, it has not been solved.
When I run the command "pip install MySQL-python", the terminal reports "Requirement already satisfied: MySQL-python in /usr/local/lib/python2.7/site-packages", and MySQL-python indeed exits there.
How could the PyCharm successfully find and import MySQLdb ?
It might be the problem with your PyCharm Interpreter. Go to PyCharm-Preferences-Project Interpreter, choose Python 2.7, which is the version that you installed. Make sure the package that you are looking for is on the list of installed packages below.