I am trying to install the python package us without admin privileges.
I have tried pip install us in Anaconda prompt to no avail.
I have also tried the suggestion listed here: Install python modules on windows without admin rights--didn't work.
I have now downloaded the files from the site https://pypi.org/project/us/ to my desktop and need to know how to install the package from here.
I am using the Spyder IDE and Python 3.7. Is there a way to do this?
Thanks.
I do this on the daily and if I understand what you are saying you are doing it right. If pip install us in command prompt or shell (if you are using Windows OS) doesn't work try py -m pip install us. Make sure you are using command prompt and not using your IDEz
As you can see it worked first try for me.
Since you have downloaded the files, Extract them in a folder and normally a setup.py file must be include, open command prompt in that folder and run :
python setup.py install
Related
I have python 3.9 I used the command 'pip install auto-py-to-exe' and it downloaded but when I tried to using the command 'auto-py-to-exe' the program just said " 'auto-py-to-exe' is not recognized as an internal or external command, operable program or batch file.". I have the latest version of PIP and I also have PATH. What can I do to fix this?
This works on VSCode:
python -m auto_py_to_exe
If I install "auto-py-to-exe" using following command, as described in this link as well as from the comment from Justin Ezequiel (above):
python -m pip install auto-py-to-exe
I am able to run it (in Windows 10) using following command:
python -m auto_py_to_exe
This gave me quite a bit of trouble, as none of the above solutions worked for me. Spent lots of time trying to figure out what I should be adding to PATH with no success.
My issue stemmed from (I think) the fact that I have been using python downloaded from the windows store, which uses a different location to store python in.
With the manual install of python (https://www.python.org) you can specify where python is downloaded and automatically add that location to path.
Steps I took to solve the problem:
Uninstall all versions of python downloaded from the windows store via settings (settings > apps > python > uninstall)
Uninstall all version of python via the control panel (control panel > add or remove programs > python x.x.x > uninstall)
Uninstall auto-py-to-exe (pip uninstall auto-py-to-exe) in case it didnt do that automatically
Install python from python.org. (auto-py-to-exe is not supported in versions greater than 3.10 as of 1/23/2023). So I installed Python 3.10
The settings which were successful for me were:
Custom installation,
check install python for all users,
check add to path,
input 'C:\Python310' (with the respective version number) for install location,
install
Check new python version has been installed python --version
Check pip is installed pip --version
Install auto-py-to-exe pip install auto-py-to-exe
When auto-py-to-exe finishes installing, scroll up through the install info and make sure there are no warnings that state there is a location not found in PATH. If there are, you'll have to do some other research on adding those locations to PATH appropriately (since I don't think I was doing that right).
Assuming no PATH warnings,
9. Run auto-py-to-exe
First you need to type in the terminal (not Python):
auto-py-to-exe
If you are currently in python use exit() to exit then try the above code.
It Depends on in which environment you have installed
Make sure to replace {User} with your user
In Conda Enviournment go to below location Manually
C:\Users\{User}\anaconda3\Scripts\auto-py-to-exe.exe
In Pip, Environment go to the location below
C:\Users\{User}\AppData\Local\Programs\Python\Python37-32\Scripts\auto-py-to-exe.exe
or you can add this path to your environment variable as well for accessing these from anywhere
First check you installed it
pip install auto-py-to-exe
then restart your vscode and check another time.
If still an error, check it in CMD.
As suggested above use:
pip show --files auto-py-to-exe to find out in what directory pip has
installed the scripts. Double check the directory is in %PATH%
This will show you where the installer has placed the binary files. I then changed to that directory which circumvents any path issue. I tried to run the files and found :
OSError: [WinError 1920] The file cannot be accessed by the system: 'C:\\Users\\aaaa\\AppData\\Local\\Microsoft\\WindowsApps\\PythonSoftwareFoundation.Python.3.7_qbz5n2kfra8p0\\python.exe'
PS C:\users\aaaa\appdata\local\packages\pythonsoftwarefoundation.python.3.7_qbz5n2kfra8p0\localcache\local-packages\python37\Scripts>
In my case, although I haven't worked out how to fix it yet... It would seem to be trying to refer to an incorrect Python executable, the files in that directory are all 0 length. Unfortunately the "python -m" suggestion didn't work for me, so it's back to the drawing board. Hope that helps you confirm if it's the right solution to chase down.
You need to make sure you have typed cd C:\Users\your_user_name\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.9_qbz5n2kfra8p0\LocalCache\local-packages\Python39\Scripts as a separate command, and then auto-py-to-exe with python 3. Check in file explorer to make sure your path is correct if the cd fails.
I have python 3.9 I used the command 'pip install auto-py-to-exe' and it downloaded but when I tried to using the command 'auto-py-to-exe' the program just said " 'auto-py-to-exe' is not recognized as an internal or external command, operable program or batch file.". I have the latest version of PIP and I also have PATH. What can I do to fix this?
This works on VSCode:
python -m auto_py_to_exe
If I install "auto-py-to-exe" using following command, as described in this link as well as from the comment from Justin Ezequiel (above):
python -m pip install auto-py-to-exe
I am able to run it (in Windows 10) using following command:
python -m auto_py_to_exe
This gave me quite a bit of trouble, as none of the above solutions worked for me. Spent lots of time trying to figure out what I should be adding to PATH with no success.
My issue stemmed from (I think) the fact that I have been using python downloaded from the windows store, which uses a different location to store python in.
With the manual install of python (https://www.python.org) you can specify where python is downloaded and automatically add that location to path.
Steps I took to solve the problem:
Uninstall all versions of python downloaded from the windows store via settings (settings > apps > python > uninstall)
Uninstall all version of python via the control panel (control panel > add or remove programs > python x.x.x > uninstall)
Uninstall auto-py-to-exe (pip uninstall auto-py-to-exe) in case it didnt do that automatically
Install python from python.org. (auto-py-to-exe is not supported in versions greater than 3.10 as of 1/23/2023). So I installed Python 3.10
The settings which were successful for me were:
Custom installation,
check install python for all users,
check add to path,
input 'C:\Python310' (with the respective version number) for install location,
install
Check new python version has been installed python --version
Check pip is installed pip --version
Install auto-py-to-exe pip install auto-py-to-exe
When auto-py-to-exe finishes installing, scroll up through the install info and make sure there are no warnings that state there is a location not found in PATH. If there are, you'll have to do some other research on adding those locations to PATH appropriately (since I don't think I was doing that right).
Assuming no PATH warnings,
9. Run auto-py-to-exe
First you need to type in the terminal (not Python):
auto-py-to-exe
If you are currently in python use exit() to exit then try the above code.
It Depends on in which environment you have installed
Make sure to replace {User} with your user
In Conda Enviournment go to below location Manually
C:\Users\{User}\anaconda3\Scripts\auto-py-to-exe.exe
In Pip, Environment go to the location below
C:\Users\{User}\AppData\Local\Programs\Python\Python37-32\Scripts\auto-py-to-exe.exe
or you can add this path to your environment variable as well for accessing these from anywhere
First check you installed it
pip install auto-py-to-exe
then restart your vscode and check another time.
If still an error, check it in CMD.
As suggested above use:
pip show --files auto-py-to-exe to find out in what directory pip has
installed the scripts. Double check the directory is in %PATH%
This will show you where the installer has placed the binary files. I then changed to that directory which circumvents any path issue. I tried to run the files and found :
OSError: [WinError 1920] The file cannot be accessed by the system: 'C:\\Users\\aaaa\\AppData\\Local\\Microsoft\\WindowsApps\\PythonSoftwareFoundation.Python.3.7_qbz5n2kfra8p0\\python.exe'
PS C:\users\aaaa\appdata\local\packages\pythonsoftwarefoundation.python.3.7_qbz5n2kfra8p0\localcache\local-packages\python37\Scripts>
In my case, although I haven't worked out how to fix it yet... It would seem to be trying to refer to an incorrect Python executable, the files in that directory are all 0 length. Unfortunately the "python -m" suggestion didn't work for me, so it's back to the drawing board. Hope that helps you confirm if it's the right solution to chase down.
You need to make sure you have typed cd C:\Users\your_user_name\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.9_qbz5n2kfra8p0\LocalCache\local-packages\Python39\Scripts as a separate command, and then auto-py-to-exe with python 3. Check in file explorer to make sure your path is correct if the cd fails.
I'm trying to install new python modules on my computer and I know how to install through the terminal, but I wish to know if there is a way to install a new module directly through VSCode (like it is possible on PyCharm)?
I already installed through the terminal, it isn't a problem, but I want to install without be obligate to open the terminal when I'm working on VSCode.
You should open the terminal inside the VSCode and install the modules you want.
something like👇
if that's not you meant, please let me know.
First of all I would advise you to select the current Python version you have. It has been explained here:
VSCode: There is no Pip installer available in the selected environment
Next, you should check is the pip installed in your Python main directory or not, by checking how to do on this website:
https://pip.pypa.io/en/stable/installing/
or this thread
How to use pip with Visual Studio Code
by typing
py -m pip
in your terminal, like
C:\Users\m\Desktop\Python> py -m pip
You should have the list of commands and general options which can be used. One of them is install
On the Python library platform, you always have the command to be copied in order to the installation of package you want.
In your terminal, the initial command should look as:
PS C:\Users\m\Desktop\Python> py -m
to which you should append the command prepared on the Python library platform (by copying it and pasting).
C:\Users\m\Desktop\Python> py -m pip install openpyxl
That's it. The package should be installed in your Python folder, what you will see in the terminal.
If everything is alright, you just need to type
import openpyxl #or other package name, which you downloaded
and use it!
Unfortunately! for now, only possible way is terminal.
I'm wanting to learn machine learning, but it requires that I use 'pip.' I'm still very new to a lot of this stuff. I've installed Python 3.4 64-bit and get-py.py.
When I run pip install sklearn I get 'pip' is not recognized as an internal or external command, operable program or batch file.
Here's a screenshot of my environmental variable PATH
https://gyazo.com/c7ec926401878845d5c4f9a556cf00ee
Any help would be greatly appreciated. I have checked out other posts where people had similar issues, but I tried various things and nothing worked.
Easiest solution is to just download a platform like Anaconda for example. It is Python with many libraries (sklearn, pandas, numpy, ...) and also with pip, all in a user-friendly Windows installer package, that takes care of everything for you.
https://www.continuum.io/downloads
If you really want to do it yourself, then
download get-pip.py (https://bootstrap.pypa.io/get-pip.py)
make sure you have Python installed and in your PATH, for example by running python --version in command prompt
Navigate to the directory, where you downloaded get-pip.py (in command prompt using the command cd).
Run the command python get-pip.py from a command prompt with admin privileges (possibly not needed, but just to make sure).
This should be all. Close your command prompt, open it again and run pip --version to test it. If it doesn't work, then search your computer for a file named pip.exe (most likely in your Python directory) and if you find it, add its path to your PATH variable (given the screenshot, I assume you know how to do this).
I downloaded Python 3.6 and the pip was installed on my system.
I found pip at below location:
C:\Users\Admin\AppData\Local\Programs\Python\Python36\Scripts
Also, before I found pip I used below command on my command prompt to install pyperclip:
python -m pip install pyperclip
For anyone that might have installed Python using the MSI installer, and ticked the box to include pip, but still gets the error 'pip' is not recognized as an internal or external command, operable program or batch file:
It looks like that the pip executable is installed in the \Scripts subdirectory of the Python installation, but that directory does not get automatically added to PATH.
For me, since I had installed Python 2.7, the directory was C:\Python27\Scripts. After adding this path to the PATH environment variable, and open a new CMD window, pip was available as a command.
I've made a workaround that will help you, copy the batch script below and modify it as specified:
#"PATH to python.exe" "PATH to pip.exe" %*
For example like this:
#"C:\programming\bin\python374\python.exe" "C:\programming\bin\python374\Scripts\pip.exe" %*
Save this file as pip.bat on Desktop and then move it to C:\Windows\system32.
For Python 3.7 or higher at least (as today is October 4th 2019) in the installation window you need to check the box "add to PATH" when you first install Python.
I'm late now, but just add python to your environment variables.
It´s explained in this short video, how to set up python to your environment variables:
https://www.youtube.com/watch?v=Y2q_b4ugPWk
after that pip should work on your cmd prompt, without cd to
"C:\Users\Admin\AppData\Local\Programs\Python\Python36\Scripts"
This is late but in case anyone runs across this issue, pip installed for me as "pip3". Once I used pip3 as my command and not pip, it worked fine. Threw me for quite a loop since I've been using Python for years.
PIP Install and Upgrade
Ensure you are accessing the right location while accessing pip as shown in my link above. Starting Python 3.4, it is included by default with the Python binary installers.
Environment Variable
It is also a good idea to update the environment variable if the path is not accessible by default, once the installation is complete.
If it is specifically pip you want you could install python again making sure to tick the install pip box which it sounds like you failed to upon initial installation.
I'm trying to download modules using the pip command in the CMD. I have pip and python both added to my path directory. I don't know how to get this to work though, I've tried upgrading my pip but just keep getting exceptions. Does anyone know how to solve this?
I'm very new to working from the command line...
I tried working around the initial fatal error
Then I tried upgrading my pip but it didn't work.
Any help much appreciated.
#Josh,
Try this.
Open your cmd prompt with admin rights (if you have privileges).
This can be done by right-clicking on the start menu and select the admin cmd in the context box provided for windows 8 and 10.
For Windows 7 you click Start>All Programs>Accesories, then right-click cmd prompt and Run as Administrator.
In the prompt, you should see something like C:\WINDOWS\system32>
If pip is installed to your path, type in "python -m pip install yourPackageNameHere"
Example given to install the twilio package (which is pretty cool):
C:\WINDOWS\system32>python -m pip install twilio
This should take care of it.
For some other helpful information, you can check out these sites.
pip users guide
https://pip.pypa.io/en/stable/user_guide/#installing-packages
or
The Python documentation (which is a programmer's best friend in time of need)
https://www.python.org/
Hope this helps.