I want to test the keyboard.on_press_key() function, but OSX blocks it naturally. When I try to run it through the terminal using sudo python [pathtofile] I get an import error: "ImportError: No module named keyboard". I tried installing the module using sudo (sudo pip install keyboard) but, even though it installs just fine, I still get the same error.
What am I doing wrong?
Note that python on macOS refers to the system installation. You should not install packages via pip to the system installation of Python. I'd recommend you to install another Python interpreter e.g. via brew. See www.brew.sh for more info.
Then, it is just a matter of installing Python via
$ brew install python3
After that, simply install your keyboard package again:
$ pip3 install keyboard
That is a error in your script, you probably didnt import the keyboard module before you used. Try adding this in the first lines of your python script:
import keyboard
Related
I'm trying to use pip to install a package. I try to run pip install from the Python shell, but I get a SyntaxError. Why do I get this error? How do I use pip to install the package?
>>> pip install selenium
^
SyntaxError: invalid syntax
pip is run from the command line, not the Python interpreter. It is a program that installs modules, so you can use them from Python. Once you have installed the module, then you can open the Python shell and do import selenium.
The Python shell is not a command line, it is an interactive interpreter. You type Python code into it, not commands.
Use the command line, not the Python shell (DOS, PowerShell in Windows).
C:\Program Files\Python2.7\Scripts> pip install XYZ
If you installed Python into your PATH using the latest installers, you don't need to be in that folder to run pip
Terminal in Mac or Linux
$ pip install XYZ
As #sinoroc suggested correct way of installing a package via pip is using separate process since pip may cause closing a thread or may require a restart of interpreter to load new installed package so this is the right way of using the API: subprocess.check_call([sys.executable, '-m', 'pip', 'install', 'SomeProject']) but since Python allows to access internal API and you know what you're using the API for you may want to use internal API anyway eg. if you're building own GUI package manager with alternative resourcess like https://www.lfd.uci.edu/~gohlke/pythonlibs/
Following soulution is OUT OF DATE, instead of downvoting suggest updates. see https://github.com/pypa/pip/issues/7498 for reference.
UPDATE: Since pip version 10.x there is no more get_installed_distributions() or main method under import pip instead use import pip._internal as pip.
UPDATE ca. v.18 get_installed_distributions() has been removed. Instead you may use generator freeze like this:
from pip._internal.operations.freeze import freeze
print([package for package in freeze()])
# eg output ['pip==19.0.3']
If you want to use pip inside the Python interpreter, try this:
import pip
package_names=['selenium', 'requests'] #packages to install
pip.main(['install'] + package_names + ['--upgrade'])
# --upgrade to install or update existing packages
If you need to update every installed package, use following:
import pip
for i in pip.get_installed_distributions():
pip.main(['install', i.key, '--upgrade'])
If you want to stop installing other packages if any installation fails, use it in one single pip.main([]) call:
import pip
package_names = [i.key for i in pip.get_installed_distributions()]
pip.main(['install'] + package_names + ['--upgrade'])
Note: When you install from list in file with -r / --requirement parameter you do NOT need open() function.
pip.main(['install', '-r', 'filename'])
Warning: Some parameters as simple --help may cause python interpreter to stop.
Curiosity: By using pip.exe you actually use python interpreter and pip module anyway. If you unpack pip.exe or pip3.exe regardless it's python 2.x or 3.x, inside is the SAME single file __main__.py:
# -*- coding: utf-8 -*-
import re
import sys
from pip import main
if __name__ == '__main__':
sys.argv[0] = re.sub(r'(-script\.pyw?|\.exe)?$', '', sys.argv[0])
sys.exit(main())
To run pip in Python 3.x, just follow the instructions on Python's page: Installing Python Modules.
python -m pip install SomePackage
Note that this is run from the command line and not the python shell (the reason for syntax error in the original question).
I installed python and when I run pip command it used to throw me an error like shown in pic below.
Make Sure pip path is added in environmental variables. For me, the python and pip installation path is::
Python: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\
pip: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\Scripts
Both these paths were added to path in environmental variables.
Now Open a new cmd window and type pip, you should be seeing a screen as below.
Now type pip install <<package-name>>. Here I'm installing package spyder so my command line statement will be as pip install spyder and here goes my running screen..
and I hope we are done with this!!
you need to type it in cmd not in the IDLE. becuse IDLE is not an command prompt if you want to install something from IDLE type this
>>>from pip.__main__ import _main as main
>>>main(#args splitted by space in list example:['install', 'requests'])
this is calling pip like pip <commands> in terminal. The commands will be seperated by spaces that you are doing there to.
If you are doing it from command line,
try -
python -m pip install selenium
or (for Python3 and above)
python3 -m pip install selenium
I've been trying to use VS Code's python debugger on Linux (mint), which uses debugpy and it keeps giving the error "No module named '_ctypes'". Installing libffi-dev didn't fix it as suggested elsewhere on SO and neither did reinstalling python and python3; so, I tried installing debugpy through pip:
pip install debugpy
Which installs with no issues. However, both python and python3 commands cannot find the module despite the fact that the module is installed (which I can see when I enter pip list)
python -m debugpy
/usr/bin/python: No module named debugpy
python3 -m debugpy
/usr/local/bin/python3: No module named debugpy
So after trying to reinstall pip multiple times, I tried installing through the pip module
python -m pip install debugpy
/usr/bin/python: No module named pip
python3 -m pip install debugpy
/usr/local/bin/python3: No module named pip
So it seems my pip module is also missing too. It may have something to do with my multiple installations of python3 as it seems that there is one in /bin and in /usr/local/bin and the local installation is the one that gets called with the python3 command according to which python3.
This leads to multiple questions:
Should the pip module be installed in python, and if so how do I install it again?
How can I get the pip command to actually install the modules into python?
How can I ensure that there is only one python3 installation in Linux (mint/ubuntu)?
Thank-you. If it helps answer the question, I do not seem to have a PYTHONPATH variable.
i had same issue but it can be fixed by two methods.
reinstall pip for the latest python version you use.
2.use the version default python version which came with your python install
On ubuntu you can try to do sudo apt install python-pip python3-pip. Also there a couple ways you can try what PIP's documentation recommends: Installation
You can try checking sudo update-alternatives --config python maybe you'll see several python installations there.
Also you can check pip contents to find out what python binary it uses:
$ which pip
/usr/local/bin/pip
$ cat /usr/local/bin/pip
#!/usr/bin/python3
# -*- coding: utf-8 -*-
import re
import sys
from pip._internal.cli.main import main
if __name__ == '__main__':
sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
sys.exit(main())
#!/usr/bin/python3
I tried installing it with pip and it has worked for me. The problem you might have is that it is not installed in the correct version of python (e.g it installs for python2 instead of python3 or it installs in python3.8 instead of python3.9).
What you can do to avoid this problem is to create a virtual environment, as is explained in this link: https://docs.python.org/3/tutorial/venv.html. If you do that, remember to change the interpreter path in VSCode. At the bottom left of the screen there should be the python version that you are using. If you click on it you see different interpreter versions that you can use. Select 'Enter interpreter path' and manually choose the directory where you have saved the new python virtual environment.
It's difficult to narrow down a solution for apparently you have done a mess... To start, do yourself a favor:
Don't touch your System's Python!
Again, it is difficult for me to understand what is the current state of your Python scene... just promise me you'll fix your System's Python 2/3 (i.e, guarantee pip 2/3 there, using your system's package manager (apt, yum, etc)).
Then, start using some virtual environment manager, nowadays we have Pipenv (https://pipenv.pypa.io/), which can be a bit cumbersome at first but -- trust me -- in ~1 hour you'll love it.
Conda (https://docs.conda.io/) is also a great env manager (or the classics (pyenv, venv, etc...)).
...Just pick one and leave your OS' Python alone. You'll see that your issues will not only get simpler to diagnose but you'll also be able to sleep in peace ;)
I'm trying to use pip to install a package. I try to run pip install from the Python shell, but I get a SyntaxError. Why do I get this error? How do I use pip to install the package?
>>> pip install selenium
^
SyntaxError: invalid syntax
pip is run from the command line, not the Python interpreter. It is a program that installs modules, so you can use them from Python. Once you have installed the module, then you can open the Python shell and do import selenium.
The Python shell is not a command line, it is an interactive interpreter. You type Python code into it, not commands.
Use the command line, not the Python shell (DOS, PowerShell in Windows).
C:\Program Files\Python2.7\Scripts> pip install XYZ
If you installed Python into your PATH using the latest installers, you don't need to be in that folder to run pip
Terminal in Mac or Linux
$ pip install XYZ
As #sinoroc suggested correct way of installing a package via pip is using separate process since pip may cause closing a thread or may require a restart of interpreter to load new installed package so this is the right way of using the API: subprocess.check_call([sys.executable, '-m', 'pip', 'install', 'SomeProject']) but since Python allows to access internal API and you know what you're using the API for you may want to use internal API anyway eg. if you're building own GUI package manager with alternative resourcess like https://www.lfd.uci.edu/~gohlke/pythonlibs/
Following soulution is OUT OF DATE, instead of downvoting suggest updates. see https://github.com/pypa/pip/issues/7498 for reference.
UPDATE: Since pip version 10.x there is no more get_installed_distributions() or main method under import pip instead use import pip._internal as pip.
UPDATE ca. v.18 get_installed_distributions() has been removed. Instead you may use generator freeze like this:
from pip._internal.operations.freeze import freeze
print([package for package in freeze()])
# eg output ['pip==19.0.3']
If you want to use pip inside the Python interpreter, try this:
import pip
package_names=['selenium', 'requests'] #packages to install
pip.main(['install'] + package_names + ['--upgrade'])
# --upgrade to install or update existing packages
If you need to update every installed package, use following:
import pip
for i in pip.get_installed_distributions():
pip.main(['install', i.key, '--upgrade'])
If you want to stop installing other packages if any installation fails, use it in one single pip.main([]) call:
import pip
package_names = [i.key for i in pip.get_installed_distributions()]
pip.main(['install'] + package_names + ['--upgrade'])
Note: When you install from list in file with -r / --requirement parameter you do NOT need open() function.
pip.main(['install', '-r', 'filename'])
Warning: Some parameters as simple --help may cause python interpreter to stop.
Curiosity: By using pip.exe you actually use python interpreter and pip module anyway. If you unpack pip.exe or pip3.exe regardless it's python 2.x or 3.x, inside is the SAME single file __main__.py:
# -*- coding: utf-8 -*-
import re
import sys
from pip import main
if __name__ == '__main__':
sys.argv[0] = re.sub(r'(-script\.pyw?|\.exe)?$', '', sys.argv[0])
sys.exit(main())
To run pip in Python 3.x, just follow the instructions on Python's page: Installing Python Modules.
python -m pip install SomePackage
Note that this is run from the command line and not the python shell (the reason for syntax error in the original question).
I installed python and when I run pip command it used to throw me an error like shown in pic below.
Make Sure pip path is added in environmental variables. For me, the python and pip installation path is::
Python: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\
pip: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\Scripts
Both these paths were added to path in environmental variables.
Now Open a new cmd window and type pip, you should be seeing a screen as below.
Now type pip install <<package-name>>. Here I'm installing package spyder so my command line statement will be as pip install spyder and here goes my running screen..
and I hope we are done with this!!
you need to type it in cmd not in the IDLE. becuse IDLE is not an command prompt if you want to install something from IDLE type this
>>>from pip.__main__ import _main as main
>>>main(#args splitted by space in list example:['install', 'requests'])
this is calling pip like pip <commands> in terminal. The commands will be seperated by spaces that you are doing there to.
If you are doing it from command line,
try -
python -m pip install selenium
or (for Python3 and above)
python3 -m pip install selenium
I'm trying to use pip to install a package. I try to run pip install from the Python shell, but I get a SyntaxError. Why do I get this error? How do I use pip to install the package?
>>> pip install selenium
^
SyntaxError: invalid syntax
pip is run from the command line, not the Python interpreter. It is a program that installs modules, so you can use them from Python. Once you have installed the module, then you can open the Python shell and do import selenium.
The Python shell is not a command line, it is an interactive interpreter. You type Python code into it, not commands.
Use the command line, not the Python shell (DOS, PowerShell in Windows).
C:\Program Files\Python2.7\Scripts> pip install XYZ
If you installed Python into your PATH using the latest installers, you don't need to be in that folder to run pip
Terminal in Mac or Linux
$ pip install XYZ
As #sinoroc suggested correct way of installing a package via pip is using separate process since pip may cause closing a thread or may require a restart of interpreter to load new installed package so this is the right way of using the API: subprocess.check_call([sys.executable, '-m', 'pip', 'install', 'SomeProject']) but since Python allows to access internal API and you know what you're using the API for you may want to use internal API anyway eg. if you're building own GUI package manager with alternative resourcess like https://www.lfd.uci.edu/~gohlke/pythonlibs/
Following soulution is OUT OF DATE, instead of downvoting suggest updates. see https://github.com/pypa/pip/issues/7498 for reference.
UPDATE: Since pip version 10.x there is no more get_installed_distributions() or main method under import pip instead use import pip._internal as pip.
UPDATE ca. v.18 get_installed_distributions() has been removed. Instead you may use generator freeze like this:
from pip._internal.operations.freeze import freeze
print([package for package in freeze()])
# eg output ['pip==19.0.3']
If you want to use pip inside the Python interpreter, try this:
import pip
package_names=['selenium', 'requests'] #packages to install
pip.main(['install'] + package_names + ['--upgrade'])
# --upgrade to install or update existing packages
If you need to update every installed package, use following:
import pip
for i in pip.get_installed_distributions():
pip.main(['install', i.key, '--upgrade'])
If you want to stop installing other packages if any installation fails, use it in one single pip.main([]) call:
import pip
package_names = [i.key for i in pip.get_installed_distributions()]
pip.main(['install'] + package_names + ['--upgrade'])
Note: When you install from list in file with -r / --requirement parameter you do NOT need open() function.
pip.main(['install', '-r', 'filename'])
Warning: Some parameters as simple --help may cause python interpreter to stop.
Curiosity: By using pip.exe you actually use python interpreter and pip module anyway. If you unpack pip.exe or pip3.exe regardless it's python 2.x or 3.x, inside is the SAME single file __main__.py:
# -*- coding: utf-8 -*-
import re
import sys
from pip import main
if __name__ == '__main__':
sys.argv[0] = re.sub(r'(-script\.pyw?|\.exe)?$', '', sys.argv[0])
sys.exit(main())
To run pip in Python 3.x, just follow the instructions on Python's page: Installing Python Modules.
python -m pip install SomePackage
Note that this is run from the command line and not the python shell (the reason for syntax error in the original question).
I installed python and when I run pip command it used to throw me an error like shown in pic below.
Make Sure pip path is added in environmental variables. For me, the python and pip installation path is::
Python: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\
pip: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\Scripts
Both these paths were added to path in environmental variables.
Now Open a new cmd window and type pip, you should be seeing a screen as below.
Now type pip install <<package-name>>. Here I'm installing package spyder so my command line statement will be as pip install spyder and here goes my running screen..
and I hope we are done with this!!
you need to type it in cmd not in the IDLE. becuse IDLE is not an command prompt if you want to install something from IDLE type this
>>>from pip.__main__ import _main as main
>>>main(#args splitted by space in list example:['install', 'requests'])
this is calling pip like pip <commands> in terminal. The commands will be seperated by spaces that you are doing there to.
If you are doing it from command line,
try -
python -m pip install selenium
or (for Python3 and above)
python3 -m pip install selenium
I'm trying to use pip to install a package. I try to run pip install from the Python shell, but I get a SyntaxError. Why do I get this error? How do I use pip to install the package?
>>> pip install selenium
^
SyntaxError: invalid syntax
pip is run from the command line, not the Python interpreter. It is a program that installs modules, so you can use them from Python. Once you have installed the module, then you can open the Python shell and do import selenium.
The Python shell is not a command line, it is an interactive interpreter. You type Python code into it, not commands.
Use the command line, not the Python shell (DOS, PowerShell in Windows).
C:\Program Files\Python2.7\Scripts> pip install XYZ
If you installed Python into your PATH using the latest installers, you don't need to be in that folder to run pip
Terminal in Mac or Linux
$ pip install XYZ
As #sinoroc suggested correct way of installing a package via pip is using separate process since pip may cause closing a thread or may require a restart of interpreter to load new installed package so this is the right way of using the API: subprocess.check_call([sys.executable, '-m', 'pip', 'install', 'SomeProject']) but since Python allows to access internal API and you know what you're using the API for you may want to use internal API anyway eg. if you're building own GUI package manager with alternative resourcess like https://www.lfd.uci.edu/~gohlke/pythonlibs/
Following soulution is OUT OF DATE, instead of downvoting suggest updates. see https://github.com/pypa/pip/issues/7498 for reference.
UPDATE: Since pip version 10.x there is no more get_installed_distributions() or main method under import pip instead use import pip._internal as pip.
UPDATE ca. v.18 get_installed_distributions() has been removed. Instead you may use generator freeze like this:
from pip._internal.operations.freeze import freeze
print([package for package in freeze()])
# eg output ['pip==19.0.3']
If you want to use pip inside the Python interpreter, try this:
import pip
package_names=['selenium', 'requests'] #packages to install
pip.main(['install'] + package_names + ['--upgrade'])
# --upgrade to install or update existing packages
If you need to update every installed package, use following:
import pip
for i in pip.get_installed_distributions():
pip.main(['install', i.key, '--upgrade'])
If you want to stop installing other packages if any installation fails, use it in one single pip.main([]) call:
import pip
package_names = [i.key for i in pip.get_installed_distributions()]
pip.main(['install'] + package_names + ['--upgrade'])
Note: When you install from list in file with -r / --requirement parameter you do NOT need open() function.
pip.main(['install', '-r', 'filename'])
Warning: Some parameters as simple --help may cause python interpreter to stop.
Curiosity: By using pip.exe you actually use python interpreter and pip module anyway. If you unpack pip.exe or pip3.exe regardless it's python 2.x or 3.x, inside is the SAME single file __main__.py:
# -*- coding: utf-8 -*-
import re
import sys
from pip import main
if __name__ == '__main__':
sys.argv[0] = re.sub(r'(-script\.pyw?|\.exe)?$', '', sys.argv[0])
sys.exit(main())
To run pip in Python 3.x, just follow the instructions on Python's page: Installing Python Modules.
python -m pip install SomePackage
Note that this is run from the command line and not the python shell (the reason for syntax error in the original question).
I installed python and when I run pip command it used to throw me an error like shown in pic below.
Make Sure pip path is added in environmental variables. For me, the python and pip installation path is::
Python: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\
pip: C:\Users\fhhz\AppData\Local\Programs\Python\Python38\Scripts
Both these paths were added to path in environmental variables.
Now Open a new cmd window and type pip, you should be seeing a screen as below.
Now type pip install <<package-name>>. Here I'm installing package spyder so my command line statement will be as pip install spyder and here goes my running screen..
and I hope we are done with this!!
you need to type it in cmd not in the IDLE. becuse IDLE is not an command prompt if you want to install something from IDLE type this
>>>from pip.__main__ import _main as main
>>>main(#args splitted by space in list example:['install', 'requests'])
this is calling pip like pip <commands> in terminal. The commands will be seperated by spaces that you are doing there to.
If you are doing it from command line,
try -
python -m pip install selenium
or (for Python3 and above)
python3 -m pip install selenium