I recently got to know about the python module signal. With that, we can capture a SIGINT and do what we want after capturing it. I used it as below. In that case I am just using SIGINT to print that program is going to be stopped and stop the program.
import signal
import os
import time
def signalHandler(signalnumb, frame):
print("Signal Number:", signalnumb, " Frame: ", frame)
print('Exiting the program...')
os._exit(0)
signal.signal(signal.SIGINT, signalHandler)
c=0
# Loop infinite times using the while(1) which is always true
while 1:
print(c)
#sleep for 1 seconds using the sleep() function in time
time.sleep(1)
c=c+1
Now I want to give any signal from keyboard(for example pressing 'q') and as soon as signal was recieved, the python program should be stopped. Has anyone got some experience on how to do that? Any other method rather than using signal module (for example using multithreading) is accepted.
Edit1-
Later I tried to use pynput module as suggested in one of a similar kind of question. For sure I have done a mistake. It doesn't work as I expected. It means with a key press, I couldn't stop the for loop from running.
from pynput import keyboard
import time
def on_press(key):
for i in range(100):
print(i)
time.sleep(1)
if key == keyboard.Key.esc:
return False # stop listener
try:
k = key.char # single-char keys
except:
k = key.name # other keys
if k in ['1', '2', 'left', 'right']: # keys of interest
# self.keys.append(k) # store it in global-like variable
print('Key pressed: ' + k)
return False # stop listener; remove this if want more keys
listener = keyboard.Listener(on_press=on_press)
listener.start() # start to listen on a separate thread
listener.join() # remove if main thread is polling self.keyspython
Can someone point out how to do it using pynput in correct way?
This was my original implementation:
a = input('Press a key to exit')
if a:
exit(0)
However, it seems that you need a piece of code that will allow for any key to be clicked and immediately exit out of the program, without hitting enter afterwards. This may be a better way to do that:
import readchar
print("Press Any Key To Exit")
k = readchar.readchar()
Hope this helps!
After carefully understanding about the threads and pynput module, I managed to stop a for loop (or any program which runs as a separate thread) using a key press callback.
from pynput import keyboard
import os
import threading
import time
loop_running = False
def on_press(key):
print(dir(key))
global loop_running
#if key == keyboard.Key.delete and not loop_running:
if ('char' in dir(key)) and (key.char == 's') and (not loop_running):
t=threading.Thread(target=start_loop)
t.start()
#elif key==keyboard.Key.tab: #if this is used, the attributes related to 'key' will be changed. you can see them since I have used a print(dir(key))
elif key.char == 'q':
loop_running=False
def start_loop():
global loop_running
loop_running = True
for i in range(100):
if not loop_running:
os._exit(0)
print(i)
time.sleep(1)
with keyboard.Listener(on_press=on_press) as listner:
listner.join()
I know how to terminate pynput keyboard listener with a timer or with a specific key to be pressed (they are both discussed here in this forum).
I cannot find a way to mix the 2 so that the listener is terminated after a preset amount of time or before that time if a specific key (Key.end for example is pressed)
I tried many combinations but none of them work so far.
added after #martineau comments:
an apparently natural way to do it could be:
from pynput import keyboard as kb
from time import time
exit_script=False
def action_press(key):
global exit_script
if key == kb.Key.end:
print ('end pressed')
exit_script= True
return False
timeOn=10
t0=time()
with kb.Listener(on_press=action_press,suppress=True) as l:
while exit_script== False and time()-t0<timeOn:
pass
l.join()
print('listener terminated')
But it fails to terminate with the timer criteria.
Does somebody know how correct this or if there is an alternative approach??
Thks
Ok I just found one answer using pynput controller. It does the trick.
from pynput import keyboard as kb
from time import time
mykb=kb.Controller()
exit_script=False
def action_press(key):
global exit_script
if key == kb.Key.end:
print ('end pressed')
exit_script= True
return False
timeOn=10
t0=time()
with kb.Listener(on_press=action_press,suppress=True) as l:
while exit_script== False:
if time()-t0>timeOn:
mykb.press(kb.Key.end)
mykb.release(kb.Key.end)
l.join()
print('listener termianted')
import keyboard
while True:
if keyboard.is_pressed('b'):
print('a')
break
This is my code it prints a when I press b.
but I want it to keep printing a when I'm holding b how do I do this.
I use this module pynput mostly for mouse events, but it handles keyboard events too.
Here is the link: https://pypi.org/project/pynput/
This library allows you to control and monitor input devices.
Currently, mouse and keyboard input and monitoring are supported.
Instruction for keyboard midway down the page:
from pynput.keyboard import Key, Controller
keyboard = Controller()
or more appropriately use pynput.keyboard.Listener like this:
from pynput import keyboard
The code below detects multiple inputs. You would have to modify it for the a to b example given in the original question.
from pynput import keyboard
def on_press(key):
try:
print('alphanumeric key {0} pressed'.format(
key.char))
except AttributeError:
print('special key {0} pressed'.format(
key))
def on_release(key):
print('{0} released'.format(
key))
if key == keyboard.Key.esc:
# Stop listener
return False
# Collect events until released
with keyboard.Listener(
on_press=on_press,
on_release=on_release) as listener:
listener.join()
# ...or, in a non-blocking fashion:
listener = keyboard.Listener(
on_press=on_press,
on_release=on_release)
listener.start()
Thank you.
How about adding a small delay after the print function to allow the program to re-evaluate if the input is still being pressed?
import keyboard
import time
while True:
if keyboard.is_pressed('b'):
print('a')
time.sleep(0.1)
How can I poll the keyboard from a console python app? Specifically, I would like to do something akin to this in the midst of a lot of other I/O activities (socket selects, serial port access, etc.):
while True:
# doing amazing pythonic embedded stuff
# ...
# periodically do a non-blocking check to see if
# we are being told to do something else
x = keyboard.read(1000, timeout = 0)
if len(x):
# ok, some key got pressed
# do something
What is the correct pythonic way to do this on Windows? Also, portability to Linux wouldn't be bad, though it's not required.
The standard approach is to use the select module.
However, this doesn't work on Windows. For that, you can use the msvcrt module's keyboard polling.
Often, this is done with multiple threads -- one per device being "watched" plus the background processes that might need to be interrupted by the device.
A solution using the curses module. Printing a numeric value corresponding to each key pressed:
import curses
def main(stdscr):
# do not wait for input when calling getch
stdscr.nodelay(1)
while True:
# get keyboard input, returns -1 if none available
c = stdscr.getch()
if c != -1:
# print numeric value
stdscr.addstr(str(c) + ' ')
stdscr.refresh()
# return curser to start position
stdscr.move(0, 0)
if __name__ == '__main__':
curses.wrapper(main)
Ok, since my attempt to post my solution in a comment failed, here's what I was trying to say. I could do exactly what I wanted from native Python (on Windows, not anywhere else though) with the following code:
import msvcrt
def kbfunc():
x = msvcrt.kbhit()
if x:
ret = ord(msvcrt.getch())
else:
ret = 0
return ret
None of these answers worked well for me. This package, pynput, does exactly what I need.
https://pypi.python.org/pypi/pynput
from pynput.keyboard import Key, Listener
def on_press(key):
print('{0} pressed'.format(
key))
def on_release(key):
print('{0} release'.format(
key))
if key == Key.esc:
# Stop listener
return False
# Collect events until released
with Listener(
on_press=on_press,
on_release=on_release) as listener:
listener.join()
import sys
import select
def heardEnter():
i,o,e = select.select([sys.stdin],[],[],0.0001)
for s in i:
if s == sys.stdin:
input = sys.stdin.readline()
return True
return False
From the comments:
import msvcrt # built-in module
def kbfunc():
return ord(msvcrt.getch()) if msvcrt.kbhit() else 0
Thanks for the help. I ended up writing a C DLL called PyKeyboardAccess.dll and accessing the crt conio functions, exporting this routine:
#include <conio.h>
int kb_inkey () {
int rc;
int key;
key = _kbhit();
if (key == 0) {
rc = 0;
} else {
rc = _getch();
}
return rc;
}
And I access it in python using the ctypes module (built into python 2.5):
import ctypes
import time
# first, load the DLL
try:
kblib = ctypes.CDLL("PyKeyboardAccess.dll")
except:
raise ("Error Loading PyKeyboardAccess.dll")
# now, find our function
try:
kbfunc = kblib.kb_inkey
except:
raise ("Could not find the kb_inkey function in the dll!")
# Ok, now let's demo the capability
while True:
x = kbfunc()
if x != 0:
print "Got key: %d" % x
else:
time.sleep(.01)
I've come across a cross-platform implementation of kbhit at http://home.wlu.edu/~levys/software/kbhit.py (made edits to remove irrelevant code):
import os
if os.name == 'nt':
import msvcrt
else:
import sys, select
def kbhit():
''' Returns True if a keypress is waiting to be read in stdin, False otherwise.
'''
if os.name == 'nt':
return msvcrt.kbhit()
else:
dr,dw,de = select.select([sys.stdin], [], [], 0)
return dr != []
Make sure to read() the waiting character(s) -- the function will keep returning True until you do!
You might look at how pygame handles this to steal some ideas.
I am using this for checking for key presses, can't get much simpler:
#!/usr/bin/python3
# -*- coding: UTF-8 -*-
import curses, time
def main(stdscr):
"""checking for keypress"""
stdscr.nodelay(True) # do not wait for input when calling getch
return stdscr.getch()
while True:
print("key:", curses.wrapper(main)) # prints: 'key: 97' for 'a' pressed
# '-1' on no presses
time.sleep(1)
While curses is not working on windows, there is a 'unicurses' version, supposedly working on Linux, Windows, Mac but I could not get this to work
One more option would be to use sshkeyboard library to enable reacting to key presses instead of polling them periodically, and potentially missing the key press:
from sshkeyboard import listen_keyboard, stop_listening
def press(key):
print(f"'{key}' pressed")
if key == "z":
stop_listening()
listen_keyboard(on_press=press)
Simply pip install sshkeyboard to use it.
This can be done using 'pynput' module in python,
You press a key and it gets printed It's that easy!
PIP Install the module in command prompt, write following text and press enter
pip install pynput
Run the following code:
from pynput.keyboard import Key, Listener
def pressed(key):
print('Pressed:',key)
def released(key):
print('Released:',key)
if key == Key.enter:
# Stop detecting when enter key is pressed
return False
# Below loop for Detcting keys runs until enter key is pressed
with Listener(on_press=pressed, on_release=released) as detector:
detector.join()
You can end the loop with any key you want by changing Key.enter to some other key in the 8th line of the code.
If you combine time.sleep, threading.Thread, and sys.stdin.read you can easily wait for a specified amount of time for input and then continue,
also this should be cross-platform compatible.
t = threading.Thread(target=sys.stdin.read(1) args=(1,))
t.start()
time.sleep(5)
t.join()
You could also place this into a function like so
def timed_getch(self, bytes=1, timeout=1):
t = threading.Thread(target=sys.stdin.read, args=(bytes,))
t.start()
time.sleep(timeout)
t.join()
del t
Although this will not return anything so instead you should use the multiprocessing pool module you can find that here: how to get the return value from a thread in python?
I have a python application in which a function runs in a recursive loop and prints updated info to the terminal with each cycle around the loop, all is good until I try to stop this recursion.
It does not stop until the terminal window is closed or the application is killed (control-c is pressed) however I am not satisfied with that method.
I have a function which will stop the loop and exit the program it just never has a chance to get called in the loop, so I wish to assign it to a key so that when it is pressed it will be called.
What is the simplest method to assign one function to one or many keys?
You can intercept the ctrl+c signal and call your own function at that time rather than
exiting.
import signal
import sys
def exit_func(signal, frame):
'''Exit function to be called when the user presses ctrl+c.
Replace this with whatever you want to do to break out of the loop.
'''
print("Exiting")
sys.exit(0) # remove this if you do not want to exit here
# register your exit function to handle the ctrl+c signal
signal.signal(signal.SIGINT, exit_func)
#loop forever
while True:
...
You should replace sys.exit(0) with something more useful to you. You could raise an exception and that except on it outside the loop body (or just finally) to perform your cleanup actions.
import keyboard
import sys
from time import sleep
def kb():
while True:
if keyboard.is_pressed("a"):
print("A key was pressed")
sys.exit(0)
def main():
kb()
if __name__ == "__main__":
main()
Here is some code
import keyboard
import sys
def kb():
while True:
#your code here
if keyboard.is_pressed("a"): #replace with your key
print("Key interrupt detected")
#cleanup here
sys.exit()
#or here
if __name__ == "__main__":
kb()
This program checks if you have pressed the key "A" every cycle. If you have, it exits.
import keyboard
def mywait():
keyboard.read_key()
def my_function():
print("hello")
def my_exit():
quit()
keyboard.add_hotkey('h', my_function)
keyboard.add_hotkey('esc', my_exit)
while True:
mywait()