I'm trying to put some frames into a main frame with Tkinter.
I used LabelFrame in each class and I want to place them with a specific position (I don't want to use some sticky= option).
I tried to configure each LabelFrame with ipadx / ipady but I can't make a frame larger only from the bottom (it becomes larger from the top and the bottom...). The grid method doesn't seem to be the solution...
I think I'm missing something while trying to code this in OOP.
Here is an example of what I'm trying to do:
import tkinter as tk
class Root(tk.Tk):
def __init__(self, *args, **kwargs):
tk.Tk.__init__(self, *args, **kwargs)
Class1(self)
class Class1(tk.LabelFrame):
def __init__(self, master):
tk.LabelFrame.__init__(self, master)
self.grid(row=1, column=0, ipadx=400, ipady=250)
tk.Label(self, text = "CLASS 1").pack()
Class2()
class Class2(tk.LabelFrame):
def __init__(self, master=None):
tk.LabelFrame.__init__(self)
self.grid(row=1, column=1, ipadx=200, ipady=250)
tk.Label(self, text = "CLASS 2").pack()
Class3()
class Class3(tk.LabelFrame):
def __init__(self, master=None):
tk.LabelFrame.__init__(self, master)
self.grid(row=2, column=0, ipadx = 400, ipady = 275)
tk.Label(self, text = "CLASS 3").pack()
root = Root()
root.geometry('1400x800')
root.mainloop()
`
Try this, it enables you to position a labelframe and to resize it with button-1 and button-3
It uses place manager.
import tkinter as tk
x, y, w, h = 20, 0, 400, 250
class Root(tk.Tk):
def __init__(self, *args, **kwargs):
tk.Tk.__init__(self, *args, **kwargs)
self.config( cursor = 'crosshair' )
self.class1 = Class1(self)
class Class1(tk.LabelFrame):
def __init__(self, master):
tk.LabelFrame.__init__( self, master )
self.place( x = x, y = y, width = 400, height = 250 )
#master.label = tk.Label( self, text = "CLASS 1" )
#aster.label.place( x = 10, y = 10, width = 380, height = 220 )
root = Root( )
root.geometry( '1400x800' )
def mover( ev ):
global x, y, w, h
if ev.num == 1:
x, y = ev.x, ev.y
root.class1.place( x = x, y = y, width = w, height = h )
elif ev.num == 3:
w, h = abs( ev.x -x ), abs( ev.y - y )
root.class1.place( x = x, y = y, width = w, height = h )
root.class1[ 'text' ] = f'x = {x} | y = {y} | w = {w} | h = {h}'
root.event_add( '<<POSIT>>', *( '<Motion>', '<Button-1>', '<Button-3>' ) )
root.bind( '<<POSIT>>', mover )
root.mainloop( )
Related
I am creating a brightness toggle on Python. I am using the Tkinter module to create a sider function. I have successfully created a slider to increase/decrease the volume. However, I want to translate this into one where I can increase/decrease the screen's brightness. Here is my volume code and output.
I am currently using macOS Monterey Version 12.2.1.
#The GUI player
import pygame
from pygame import mixer
from tkinter import *
# Makes a new window and stores it inside the root variable.
root = Tk()
mixer.init() # initialising the mixer
# Coding the background music
def play_music():
pygame.mixer.music.load("ArcadeMusic copy.mp3")
pygame.mixer.music.play(-1)
def set_vol(val):
volume = int(val) / 100
mixer.music.set_volume(volume)
root.geometry('300x70')
root.title("Volume")
text = Label(root, text = "Drag the slider to adjust volume")
text.pack()
scale = Scale(root,from_=0,to=100 , orient=HORIZONTAL, command=set_vol)
scale.pack()
play_music()
root.mainloop()
Are you trying to achieve something like this? Or do you want to control desktop brightness?
import tkinter
def find( obj ):
name = f"{type(obj).__name__}:n "
try:
return name + "n ".join( [ f"{x} = '{obj.cget(x)}'" for x in obj.keys() ] )
except:
return f"'{obj}' has no keys attribute"
class brightness:
def __init__( self ):
self.master = tkinter.Tk()
self.master.update_idletasks()
self.color = 15790320 # #f0f0f0 = SystemButtonFace
self.var = tkinter.IntVar( self.master, value = self.color )
self.flexx( self.master )
self.label = tkinter.LabelFrame(
self.master, labelanchor = 'n', text = self.master['background'] )
self.label.grid( row=0, column=0, columnspan=2, sticky='nsew' )
self.flexx( self.label, r=None )
self.flexx( self.label, r=None , c=1 )
self.scroll = tkinter.Scale(
self.label, orient = 'horizontal',
resolution = 65793, label = 'Brightness Control',
from_ = 0, to = 16777215, variable = self.var,
command = self.control )
self.scroll.grid( row = 1, column=0, columnspan=2, sticky='ew' )
self.master.geometry( '200x200' )
self.master.minsize( 334, 113 )
def flexx( self, o, r = 0, c = 0, rw = 1, cw = 1 ):
if r != None:
o.rowconfigure( r, weight = rw )
if c != None:
o.columnconfigure( c, weight = cw )
def convert( self ):
col = '#' + ( '000000' + hex( self.color )[2:])[~5:]
self.var.set( self.color )
self.label['text'] = col
self.master.tk_setPalette( col )
def control_up( self ):
self.color += 65793
if self.color > 16777215:
self.color = 15790320
col = self.convert( )
def control_down( self ):
self.color -= 65793
if self.color < 0: # 15790320:
self.color = 16777215
col = self.convert( )
def control( self, n ):
self.color = int( n )
col = self.convert( )
if __name__ == '__main__':
bright = brightness( )
tkinter.mainloop()
I have a program written in Python, that makes a window where you can draw, using Tkinter. Every time you left-click your mouse, you make a point in your canvas. When you double-click, a polygon is made, filled with the color you chose. I found a way to change the colors from the boxes, when you right-click a box, but the problem is that the selected color is not saved and i cannot make it replace the previous one. Does anyone know how to solve this problem?
import tkinter as tk
from tkinter import colorchooser
class Point():
def __init__(self, canvas, x, y):
self.x = x
self.y = y
canvas.create_oval(x-2, y-2, x+2, y+2, fill='white')
class Poly():
def __init__(self, canvas, board, p_list=[] ):
self.p_list = p_list
self.canvas = canvas
self.board = board
def draw_poly(self):
points = []
for p in self.p_list:
points.extend([p.x, p.y])
points.extend(points[:2])
self.canvas.create_polygon(points, fill=self.board.current_color, outline=self.board.current_color)
def add_point(self, p):
self.p_list.append(p)
if len(self.p_list)>1:
p1 = self.p_list[-1]
p2 = self.p_list[-2]
self.canvas.create_line(p1.x, p1.y, p2.x, p2.y, fill="white", width=2)
class Palette():
def __init__(self, frame, board, colors):
self.colors = colors
self.board = board
self.allColors = []
for color in self.colors:
f = tk.Frame(frame, bg='lightgrey', bd=3)
f.pack(expand=1, fill='both', side='left')
if self.board.current_color == color: f.config(bg='red')
self.allColors.append(f)
l = tk.Label(f, bg=color)
l.pack(expand=1, fill='both', padx=2, pady=2)
l.bind("<1>", self.set_color)
l.bind("<Button-3>", self.do_popup)
def do_popup(self, event):
clsheet = tk.colorchooser.askcolor()
self.current_color = clsheet[1]
def set_color(self, e):
self.board.current_color = e.widget['bg']
self.selected_color(e.widget.master)
def selected_color(self, colorFrame):
for f in self.allColors: f.config(bg = 'lightgrey')
colorFrame.config(bg="red")
class Board():
def __init__(self, root):
self.colors = ['#B4FE98', '#77E4D4', '#F4EEA9', '#F0BB62', '#FF5F7E', "#9A0680"]
self.root = root
self.current_color = self.colors[0]
self.f1 = tk.Frame(self.root)
self.f1.pack(expand=1, fill='both', padx=5)
self.f2 = tk.Frame(self.root)
self.f2.pack(expand=1, fill='both')
self.canvas = tk.Canvas(self.f2, bg="#000D6B", height=550)
self.canvas.pack(expand=1, fill='both', padx=5, pady=5)
self.pallette = Palette(self.f1, self, self.colors )
self.canvas.bind("<1>", self.draw_point)
self.canvas.bind("<Double-Button-1>", self.draw_poly)
self.poly = None
def draw_point(self, evnt):
if self.poly: self.poly.add_point(Point(self.canvas, evnt.x, evnt.y))
else: self.poly = Poly(self.canvas, self, [Point(self.canvas, evnt.x, evnt.y)])
def draw_poly(self, evnt):
if self.poly and len(self.poly.p_list) > 2:
self.poly.add_point(Point(self.canvas, evnt.x, evnt.y))
self.poly.draw_poly()
self.poly = None
else: self.draw_point(evnt)
#main program
root = tk.Tk()
root.title('my program')
root.geometry("600x700")
root.resizable(0,0)
Board(root)
tk.mainloop()
To fix the part where right-clicking a color was not working i changed two things in your script:
You stored your frame widgets and their sub-widget labels in Palette.allColors. I handed over the index of the selected color to the do_popup event by using partial. Then you can simply iterate over all widgets in Palette.allColors and if the index from the event matches the index in the list, you access the children and further the !label key of those and change the background color to the selected color.
I matched Board.current_color and Palette.current_color
Most changes were made in Palette.do_popup(). Might not be the most elegant solution but it looks like its working like you intend. Full code:
import tkinter as tk
from tkinter import colorchooser
from functools import partial
class Point():
def __init__(self, canvas, x, y):
self.x = x
self.y = y
canvas.create_oval(x - 2, y - 2, x + 2, y + 2, fill='white')
class Poly():
def __init__(self, canvas, board, p_list=[]):
self.p_list = p_list
self.canvas = canvas
self.board = board
def draw_poly(self):
points = []
for p in self.p_list:
points.extend([p.x, p.y])
points.extend(points[:2])
self.canvas.create_polygon(points, fill=self.board.current_color, outline=self.board.current_color)
def add_point(self, p):
self.p_list.append(p)
if len(self.p_list) > 1:
p1 = self.p_list[-1]
p2 = self.p_list[-2]
self.canvas.create_line(p1.x, p1.y, p2.x, p2.y, fill="white", width=2)
class Palette():
def __init__(self, frame, board, colors):
self.colors = colors
self.board = board
self.allColors = []
for idx, color in enumerate(self.colors):
f = tk.Frame(frame, bg='lightgrey', bd=3)
f.pack(expand=1, fill='both', side='left')
if self.board.current_color == color: f.config(bg='red')
self.allColors.append(f)
l = tk.Label(f, bg=color)
l.pack(expand=1, fill='both', padx=2, pady=2)
l.bind("<1>", self.set_color)
l.bind("<Button-3>", partial(self.do_popup, idx))
def do_popup(self, idx, event):
clsheet = tk.colorchooser.askcolor()
self.current_color = clsheet[1].upper()
print(f"You chose: {self.current_color}")
self.board.current_color = self.current_color # required?
self.selected_color(event.widget.master)
for frm_idx, frm in enumerate(self.allColors):
if frm_idx == idx:
frm.children["!label"].config(bg=self.current_color)
def set_color(self, e):
self.board.current_color = e.widget['bg']
self.selected_color(e.widget.master)
def selected_color(self, colorFrame):
for f in self.allColors: f.config(bg='lightgrey')
colorFrame.config(bg="red")
class Board():
def __init__(self, root):
self.colors = ['#B4FE98', '#77E4D4', '#F4EEA9', '#F0BB62', '#FF5F7E', "#9A0680"]
self.root = root
self.current_color = self.colors[0]
self.f1 = tk.Frame(self.root)
self.f1.pack(expand=1, fill='both', padx=5)
self.f2 = tk.Frame(self.root)
self.f2.pack(expand=1, fill='both')
self.canvas = tk.Canvas(self.f2, bg="#000D6B", height=550)
self.canvas.pack(expand=1, fill='both', padx=5, pady=5)
self.pallette = Palette(self.f1, self, self.colors)
self.canvas.bind("<1>", self.draw_point)
self.canvas.bind("<Double-Button-1>", self.draw_poly)
self.poly = None
def draw_point(self, evnt):
if self.poly:
self.poly.add_point(Point(self.canvas, evnt.x, evnt.y))
else:
self.poly = Poly(self.canvas, self, [Point(self.canvas, evnt.x, evnt.y)])
def draw_poly(self, evnt):
if self.poly and len(self.poly.p_list) > 2:
self.poly.add_point(Point(self.canvas, evnt.x, evnt.y))
self.poly.draw_poly()
self.poly = None
else:
self.draw_point(evnt)
# main program
root = tk.Tk()
root.title('my program')
root.geometry("600x700")
root.resizable(0, 0)
Board(root)
tk.mainloop()
I am trying to simulate a stellar system. I aim to manipulate the parameters via slider widgets, see the (reduced) code below. The slider widget in my code accepts a new value for the sun mass, which was set via a StellarSys instance. However the slider.set method fails with TypeError: 'NoneType' object is not subscriptable. Does somebody have a solution or can explain what I'm doing wrong? Many thanks.
import tkinter as tk
import math
class Space(tk.Frame):
def __init__(self, master, size, bg=None):
super().__init__(master)
frame = tk.Frame(self, border=5)
frame.pack()
self.width, self.height = size
self.canvas = tk.Canvas(frame, width=self.width,height=self.height,
borderwidth=0, highlightthickness=0, bg=bg)
self.canvas.pack()
self.bodies = None
def place_bodies(self):
for body in self.bodies:
x1, y1 = int(body.loc[0]-body.size/2.0),int(body.loc[1]-body.size/2.0)
x2, y2 = x1 + body.size, y1 + body.size
body.tk_id = self.canvas.create_oval(x1, y1, x2, y2, fill=body.color)
class SpaceBody:
def __init__(self, **kwargs):
self.name = kwargs['name']
self.size = kwargs['size']
self.mass = kwargs['mass']
self.loc = kwargs['loc']
self.speed = kwargs['speed']
self.color = kwargs['color']
self.dxdy = (0,0)
self.tk_id = None
def __repr__(self):
return f"\n{self.name} is {self.color}"
class Dashboard(tk.Frame):
def __init__(self, master, bg=None):
super().__init__(master)
frame = tk.Frame(self, border=5, bg=bg)
frame.pack()
sun_frame=tk.Frame(frame)
sun_frame.grid(row=1)
w, h = 15, 3
tk.Label(sun_frame, text = '').grid(row=0)
tk.Label(sun_frame, text = 'SUN MASS').grid(row=1)
self.sun_mass = tk.Scale(sun_frame, from_=0, to=1000, orient='horizontal')
self.sun_mass.bind("<ButtonRelease-1>", self.update)
# self.sun_mass.set(500) # this works
self.sun_mass.set(space.bodies[0].mass) # This doesn't work
self.sun_mass.grid(row=2)
def update(self, event):
space.bodies[0].mass = self.sun_mass.get()
print(space.bodies[0].mass)
class StellarSys:
def __init__(self):
sun = SpaceBody(name='Sun', size=30, mass=500, loc=(500,400),speed=(0, 0), color='yellow')
earth = SpaceBody(name='Earth',size=15, mass=1, loc=(500,200),speed=(15,0), color='green')
space.bodies = [sun, earth]
space.place_bodies()
# MAIN
root = tk.Tk()
root.title('UNIVERSE')
size = (1000, 800)
space = Space(root, size, bg='black')
space.grid(row=0, column = 0,sticky="nsew")
dashboard = Dashboard(root)
dashboard.grid(row=0, column = 1,sticky="nsew")
stellarsys = StellarSys()
root.mainloop()
You initialize self.bodies to None, and then try to subscript that value. As the error says, you can't use subscripts on a value of None.
You need to rework your logic so that self.bodies is a non-empty list before trying to reference an item in the list.
I used the code below which I found on internet to implement a mouse hovering action in python:
from tkinter import *
import numpy as np
class rect:
def __init__(self, root):
self.root = root
self.size = IntVar()
self.canvas = Canvas(self.root, width=800, height=300)
self.scale = Scale(self.root, orient=HORIZONTAL, from_=3, to=20, tickinterval=1, variable=self.size)
self.scale.bind('<ButtonRelease>', self.show)
self.canvas.bind('<Motion>', self.motion)
self.board = []
self.array = np.zeros((self.scale.get(),self.scale.get())).tolist()
self.canvas.pack()
self.scale.pack()
def motion(self,event):
if self.canvas.find_withtag(CURRENT):
current_color = self.canvas.itemcget(CURRENT, 'fill')
self.canvas.itemconfig(CURRENT, fill="cyan")
self.canvas.update_idletasks()
self.canvas.after(150)
self.canvas.itemconfig(CURRENT, fill=current_color)
def show(self,event):
self.canvas.delete('all')
x = 50
y = 50
row = []
self.board.clear()
for i in range(self.scale.get()):
row = []
for j in range(self.scale.get()):
rectangle = self.canvas.create_rectangle(x, y, x + 50, y + 50, fill='red')
x += 50
row.append(rectangle)
x -= j*50
y +=50
self.board.append(row)
print(self.board)
root = Tk()
a = rect(root)
root.mainloop()
The problem with the execution is that the color of the item changes to blue only for a limited time.
I need the color of each item in the canvas to be changed whenever I enter its zone and remain blue until the mouse is leaving the item.
You can pass the argument activefill when creating your rectangle.
From effboot.org:
Fill color to use when the mouse pointer is moved over the item, if
different from fill.
To do so, replace:
rectangle = self.canvas.create_rectangle(x, y, x + 50, y + 50, fill='red')
By:
rectangle = self.canvas.create_rectangle(x, y, x + 50, y + 50, fill='red', activefill='cyan')
This removes the need to bind Motion to your canvas, and also makes the code noticebly shorter:
from tkinter import *
import numpy as np
class rect:
def __init__(self, root):
self.root = root
self.size = IntVar()
self.canvas = Canvas(self.root, width=800, height=300)
self.scale = Scale(self.root, orient=HORIZONTAL, from_=3, to=20, tickinterval=1, variable=self.size)
self.scale.bind('<ButtonRelease>', self.show)
self.board = []
self.array = np.zeros((self.scale.get(),self.scale.get())).tolist()
self.canvas.pack()
self.scale.pack()
def show(self,event):
self.canvas.delete('all')
x = 50
y = 50
row = []
self.board.clear()
for i in range(self.scale.get()):
row = []
for j in range(self.scale.get()):
rectangle = self.canvas.create_rectangle(x, y, x + 50, y + 50, fill='red', activefill='cyan')
x += 50
row.append(rectangle)
x -= j*50
y +=50
self.board.append(row)
print(self.board)
root = Tk()
a = rect(root)
root.mainloop()
I changed motion method and added self.last = None to __init__ method:
from tkinter import *
import numpy as np
class rect:
def __init__(self, root):
self.root = root
self.size = IntVar()
self.canvas = Canvas(self.root, width=800, height=300)
self.scale = Scale(self.root, orient=HORIZONTAL, from_=3, to=20, tickinterval=1, variable=self.size)
self.scale.bind('<ButtonRelease>', self.show)
self.canvas.bind('<Motion>', self.motion)
self.board = []
self.array = np.zeros((self.scale.get(),self.scale.get())).tolist()
self.canvas.pack()
self.scale.pack()
self.last = None
def motion(self, event):
temp = self.canvas.find_withtag(CURRENT)
if temp == self.last:
self.canvas.itemconfig(CURRENT, fill="cyan")
self.canvas.update_idletasks()
else:
self.canvas.itemconfig(self.last, fill="red")
self.last = temp
def show(self,event):
self.canvas.delete('all')
x = 50
y = 50
row = []
self.board.clear()
for i in range(self.scale.get()):
row = []
for j in range(self.scale.get()):
rectangle = self.canvas.create_rectangle(x, y, x + 50, y + 50, fill='red')
x += 50
row.append(rectangle)
x -= j*50
y +=50
self.board.append(row)
print(self.board)
root = Tk()
a = rect(root)
root.mainloop()
Can anyone tell me why my 'addLine' method is failing to call when the self.rec button is clicked?
from tkinter import *
from tkinter import ttk
root = Tk()
class Paint:
def __init__(self, parent):
self.parent = parent
self.whiteBoard = Canvas(self.parent)
self.whiteBoard.grid(column=0, row=0, sticky=(N,W,E,S))
self.lastx = 0
self.lasty = 0
self.rec = self.whiteBoard.create_rectangle((10, 10, 30, 30), fill="red")
self.whiteBoard.tag_bind(self.rec, "<Button-1>", self.getClick)
def xy(self, event):
self.lastx, self.lasty = event.x, event.y
print (event.x, " is the x coordinate")
print (event.y, " is the y coordinate")
def addLine(self, event):
canvas.create_line((lastx, lasty, event.x, event.y))
self.lastx, self.lasty = event.x, event.y
def getClick(self, event):
self.whiteBoard.bind("<Button-1>", self.xy)
self.whiteBoard.bind("B1-Motion>", self.addLine)
white = Paint(root)
root.mainloop()
This is all part of an attempt to make a MS paint clone using Tkinter.
First, you are binding to B1-Motion> (note the missing <). But, more importantly, don't do bindings like those. It looks like the getClick method is actually "select the line tool". Then, add the bindings <Button-1> and <B1-Motion> to the canvas itself. When the callbacks are called, you do the actions according to the selected tool.
Here is rough sketch that follows this suggestion (with a RECTANGLE tool as a bonus):
import tkinter
# TOOLS
LINE, RECTANGLE = list(range(2))
class Paint:
def __init__(self, canvas):
self.canvas = canvas
self._tool, self._obj = None, None
self.lastx, self.lasty = None, None
self.canvas.bind('<Button-1>', self.update_xy)
self.canvas.bind('<B1-Motion>', self.draw)
def draw(self, event):
if self._tool is None or self._obj is None:
return
x, y = self.lastx, self.lasty
if self._tool in (LINE, RECTANGLE):
self.canvas.coords(self._obj, (x, y, event.x, event.y))
def update_xy(self, event):
if self._tool is None:
return
x, y = event.x, event.y
if self._tool == LINE:
self._obj = self.canvas.create_line((x, y, x, y))
elif self._tool == RECTANGLE:
self._obj = self.canvas.create_rectangle((x, y, x, y))
self.lastx, self.lasty = x, y
def select_tool(self, tool):
print('Tool', tool)
self._tool = tool
class Tool:
def __init__(self, whiteboard, parent=None):
self.whiteboard = whiteboard
frame = tkinter.Frame(parent)
self._curr_tool = None
for i, (text, t) in enumerate((('L', LINE), ('R', RECTANGLE))):
lbl = tkinter.Label(frame, text=text, width=2, relief='raised')
lbl._tool = t
lbl.bind('<Button-1>', self.update_tool)
lbl.pack(padx=6, pady=6*(i % 2))
frame.pack(side='left', fill='y', expand=True, pady=6)
def update_tool(self, event):
lbl = event.widget
if self._curr_tool:
self._curr_tool['relief'] = 'raised'
lbl['relief'] = 'sunken'
self._curr_tool = lbl
self.whiteboard.select_tool(lbl._tool)
root = tkinter.Tk()
canvas = tkinter.Canvas(highlightbackground='black')
whiteboard = Paint(canvas)
tool = Tool(whiteboard)
canvas.pack(fill='both', expand=True, padx=6, pady=6)
root.mainloop()