import pygame
pygame.init()
white=(255,255,255)
black=(0,0,0)
red=(255,0,0)
green=(0,255,0)
blue=(0,0,255)
gameDisplay=pygame.display.set_mode((800,600))
gameDisplay.fill(black)
Displayer=pygame.PixelArray(gameDisplay)
pygame.draw.line(gameDisplay, blue,(100,200),(300,450),5)
pygame.draw.rect(gameDisplay, red, (400,400,50,25))
pygame.draw.circle(gameDisplay, white,(150,150,),75)
I used the code to make some shapes but I am unable to export it.
The pygame window always stops responding. How would I stop this behaviour?
Remove the line:
Displayer=pygame.PixelArray(gameDisplay)
This will lock the gameDisplay and the following drawing operations will fail. You don't need that line of code at all. pygame.PixelArray locks the surface:
During its lifetime, the PixelArray locks the surface, thus you explicitly have to close() it once its not used any more and the surface should perform operations in the same scope.
You can remove Displayer=pygame.PixelArray(gameDisplay)
And also you will need to write pygame.display.flip()
This will actually display all the drawings on the screen.
The last thing you need is a while loop that runs until the program ends to make sure you are drawing the shapes on every frame:
pygame.init()
white=(255,255,255)
black=(0,0,0)
red=(255,0,0)
green=(0,255,0)
blue=(0,0,255)
gameDisplay=pygame.display.set_mode((800,600))
gameDisplay.fill(black)
run = True
while run:
for event in pygame.event.get():
if event.type == pygame.QUIT:
run = False
gameDisplay.fill((255, 255, 255))
pygame.draw.line(gameDisplay, blue,(100,200),(300,450),5)
pygame.draw.rect(gameDisplay, red, (400,400,50,25))
pygame.draw.circle(gameDisplay, white,(150,150,),75)
pygame.display.flip()
pygame.quit()
exit()
This is the most common way to do it, you check we didn't close the window, and then draw on every frame each shape, then use pygame.display.flip() to actually display everything.
Hope this helps!
Related
i have started a new project in python using pygame and for the background i want the bottom half filled with gray and the top black. i have used rect drawing in projects before but for some reason it seems to be broken? i don't know what i am doing wrong. the weirdest thing is that the result is different every time i run the program. sometimes there is only a black screen and sometimes a gray rectangle covers part of the screen, but never half of the screen.
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
You need to update the display.
You are actually drawing on a Surface object. If you draw on the Surface associated to the PyGame display, this is not immediately visible in the display. The changes become visibel, when the display is updated with either pygame.display.update() or pygame.display.flip().
See pygame.display.flip():
This will update the contents of the entire display.
While pygame.display.flip() will update the contents of the entire display, pygame.display.update() allows updating only a portion of the screen to updated, instead of the entire area. pygame.display.update() is an optimized version of pygame.display.flip() for software displays, but doesn't work for hardware accelerated displays.
The typical PyGame application loop has to:
handle the events by calling either pygame.event.pump() or pygame.event.get().
update the game states and positions of objects dependent on the input events and time (respectively frames)
clear the entire display or draw the background
draw the entire scene (draw all the objects)
update the display by calling either pygame.display.update() or pygame.display.flip()
limit frames per second to limit CPU usage with pygame.time.Clock.tick
import pygame
from pygame.locals import *
pygame.init()
DISPLAY = pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
clock = pygame.time.Clock()
run = True
while run:
# handle events
for event in pygame.event.get():
if event.type == QUIT:
run = False
# clear display
DISPLAY.fill(0)
# draw scene
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
# update display
pygame.display.flip()
# limit frames per second
clock.tick(60)
pygame.quit()
exit()
repl.it/#Rabbid76/PyGame-MinimalApplicationLoop See also Event and application loop
simply change your code to:
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
pygame.display.flip() #Refreshing screen
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
it should help
i have started a new project in python using pygame and for the background i want the bottom half filled with gray and the top black. i have used rect drawing in projects before but for some reason it seems to be broken? i don't know what i am doing wrong. the weirdest thing is that the result is different every time i run the program. sometimes there is only a black screen and sometimes a gray rectangle covers part of the screen, but never half of the screen.
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
You need to update the display.
You are actually drawing on a Surface object. If you draw on the Surface associated to the PyGame display, this is not immediately visible in the display. The changes become visibel, when the display is updated with either pygame.display.update() or pygame.display.flip().
See pygame.display.flip():
This will update the contents of the entire display.
While pygame.display.flip() will update the contents of the entire display, pygame.display.update() allows updating only a portion of the screen to updated, instead of the entire area. pygame.display.update() is an optimized version of pygame.display.flip() for software displays, but doesn't work for hardware accelerated displays.
The typical PyGame application loop has to:
handle the events by calling either pygame.event.pump() or pygame.event.get().
update the game states and positions of objects dependent on the input events and time (respectively frames)
clear the entire display or draw the background
draw the entire scene (draw all the objects)
update the display by calling either pygame.display.update() or pygame.display.flip()
limit frames per second to limit CPU usage with pygame.time.Clock.tick
import pygame
from pygame.locals import *
pygame.init()
DISPLAY = pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
clock = pygame.time.Clock()
run = True
while run:
# handle events
for event in pygame.event.get():
if event.type == QUIT:
run = False
# clear display
DISPLAY.fill(0)
# draw scene
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
# update display
pygame.display.flip()
# limit frames per second
clock.tick(60)
pygame.quit()
exit()
repl.it/#Rabbid76/PyGame-MinimalApplicationLoop See also Event and application loop
simply change your code to:
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
pygame.display.flip() #Refreshing screen
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
it should help
i have started a new project in python using pygame and for the background i want the bottom half filled with gray and the top black. i have used rect drawing in projects before but for some reason it seems to be broken? i don't know what i am doing wrong. the weirdest thing is that the result is different every time i run the program. sometimes there is only a black screen and sometimes a gray rectangle covers part of the screen, but never half of the screen.
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
You need to update the display.
You are actually drawing on a Surface object. If you draw on the Surface associated to the PyGame display, this is not immediately visible in the display. The changes become visibel, when the display is updated with either pygame.display.update() or pygame.display.flip().
See pygame.display.flip():
This will update the contents of the entire display.
While pygame.display.flip() will update the contents of the entire display, pygame.display.update() allows updating only a portion of the screen to updated, instead of the entire area. pygame.display.update() is an optimized version of pygame.display.flip() for software displays, but doesn't work for hardware accelerated displays.
The typical PyGame application loop has to:
handle the events by calling either pygame.event.pump() or pygame.event.get().
update the game states and positions of objects dependent on the input events and time (respectively frames)
clear the entire display or draw the background
draw the entire scene (draw all the objects)
update the display by calling either pygame.display.update() or pygame.display.flip()
limit frames per second to limit CPU usage with pygame.time.Clock.tick
import pygame
from pygame.locals import *
pygame.init()
DISPLAY = pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
clock = pygame.time.Clock()
run = True
while run:
# handle events
for event in pygame.event.get():
if event.type == QUIT:
run = False
# clear display
DISPLAY.fill(0)
# draw scene
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
# update display
pygame.display.flip()
# limit frames per second
clock.tick(60)
pygame.quit()
exit()
repl.it/#Rabbid76/PyGame-MinimalApplicationLoop See also Event and application loop
simply change your code to:
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
pygame.display.flip() #Refreshing screen
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
it should help
i have started a new project in python using pygame and for the background i want the bottom half filled with gray and the top black. i have used rect drawing in projects before but for some reason it seems to be broken? i don't know what i am doing wrong. the weirdest thing is that the result is different every time i run the program. sometimes there is only a black screen and sometimes a gray rectangle covers part of the screen, but never half of the screen.
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
You need to update the display.
You are actually drawing on a Surface object. If you draw on the Surface associated to the PyGame display, this is not immediately visible in the display. The changes become visibel, when the display is updated with either pygame.display.update() or pygame.display.flip().
See pygame.display.flip():
This will update the contents of the entire display.
While pygame.display.flip() will update the contents of the entire display, pygame.display.update() allows updating only a portion of the screen to updated, instead of the entire area. pygame.display.update() is an optimized version of pygame.display.flip() for software displays, but doesn't work for hardware accelerated displays.
The typical PyGame application loop has to:
handle the events by calling either pygame.event.pump() or pygame.event.get().
update the game states and positions of objects dependent on the input events and time (respectively frames)
clear the entire display or draw the background
draw the entire scene (draw all the objects)
update the display by calling either pygame.display.update() or pygame.display.flip()
limit frames per second to limit CPU usage with pygame.time.Clock.tick
import pygame
from pygame.locals import *
pygame.init()
DISPLAY = pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
clock = pygame.time.Clock()
run = True
while run:
# handle events
for event in pygame.event.get():
if event.type == QUIT:
run = False
# clear display
DISPLAY.fill(0)
# draw scene
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
# update display
pygame.display.flip()
# limit frames per second
clock.tick(60)
pygame.quit()
exit()
repl.it/#Rabbid76/PyGame-MinimalApplicationLoop See also Event and application loop
simply change your code to:
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
pygame.display.flip() #Refreshing screen
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
it should help
i have started a new project in python using pygame and for the background i want the bottom half filled with gray and the top black. i have used rect drawing in projects before but for some reason it seems to be broken? i don't know what i am doing wrong. the weirdest thing is that the result is different every time i run the program. sometimes there is only a black screen and sometimes a gray rectangle covers part of the screen, but never half of the screen.
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
You need to update the display.
You are actually drawing on a Surface object. If you draw on the Surface associated to the PyGame display, this is not immediately visible in the display. The changes become visibel, when the display is updated with either pygame.display.update() or pygame.display.flip().
See pygame.display.flip():
This will update the contents of the entire display.
While pygame.display.flip() will update the contents of the entire display, pygame.display.update() allows updating only a portion of the screen to updated, instead of the entire area. pygame.display.update() is an optimized version of pygame.display.flip() for software displays, but doesn't work for hardware accelerated displays.
The typical PyGame application loop has to:
handle the events by calling either pygame.event.pump() or pygame.event.get().
update the game states and positions of objects dependent on the input events and time (respectively frames)
clear the entire display or draw the background
draw the entire scene (draw all the objects)
update the display by calling either pygame.display.update() or pygame.display.flip()
limit frames per second to limit CPU usage with pygame.time.Clock.tick
import pygame
from pygame.locals import *
pygame.init()
DISPLAY = pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
clock = pygame.time.Clock()
run = True
while run:
# handle events
for event in pygame.event.get():
if event.type == QUIT:
run = False
# clear display
DISPLAY.fill(0)
# draw scene
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
# update display
pygame.display.flip()
# limit frames per second
clock.tick(60)
pygame.quit()
exit()
repl.it/#Rabbid76/PyGame-MinimalApplicationLoop See also Event and application loop
simply change your code to:
import pygame, sys
from pygame.locals import *
pygame.init()
DISPLAY=pygame.display.set_mode((800,800))
pygame.display.set_caption("thing")
pygame.draw.rect(DISPLAY, (200,200,200), pygame.Rect(0,400,800,400))
pygame.display.flip() #Refreshing screen
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
it should help