Related
How could i go from this format of dictionary
{'A.B': 7, 'C.D': 5, 'A.D': 34}
to this:
{'A': {'B':7, D:34} , 'C': {'D': 5} }
Meaning of key 'A.B' is that i go from A to B and its value means 7 times, so what i am trying to do is change this format so that my dictionary key is where i go from and its value its a dictionary with his destinations (one or more) and the times of each.
I have tried several things, but for now things are not working out.
I have tried using for with a new dictionary but it overrides my keys.
Using defaultdict:
d = {'A.B': 7, 'C.D': 5, 'A.D': 34}
from collections import defaultdict
formatted_d = defaultdict(dict)
for k, v in d.items():
top_key, bottom_key = k.split('.')
formatted_d[top_key][bottom_key] = v
Without defaultdict:
formatted_d = {}
for k, v in d.items():
top_key, bottom_key = k.split('.')
if top_key not in formatted_d:
formatted_d[top_key] = {}
formatted_d[top_key][bottom_key] = v
Clean and easy to understand with collections.defaultdict:
from collections import defaultdict
dct = {'A.B': 7, 'C.D': 5, 'A.D': 34}
new_dict = defaultdict(dict)
for key, value in dct.items():
root, descendant = key.split(".")
new_dict[root][descendant] = value
print(new_dict)
This yields
defaultdict(<class 'dict'>, {'A': {'B': 7, 'D': 34}, 'C': {'D': 5}})
Quick approach:
d = {'A.B': 7, 'C.D': 5, 'A.D': 34}
dicts_init = {key.split('.')[0]: {} for key, value in d.items()}
for key, value in d.items():
root_k, val = key.split(".")
dicts_init[root_k][val] = value
print(dicts_init)
Outputs:
{'A': {'B': 7, 'D': 34}, 'C': {'D': 5}}
d = {'A.B': 7, 'C.D': 5, 'A.D': 34}
result = {}
for key in d:
current, destination = key.split('.')
times = d.get(key)
if current not in result.keys():
result[current] = {destination: int(times)}
else:
result[current][destination] = int(times)
print(result)
Suppose you have a dictionary like:
{'a': 1,
'c': {'a': 2,
'b': {'x': 5,
'y' : 10}},
'd': [1, 2, 3]}
How would you go about flattening that into something like:
{'a': 1,
'c_a': 2,
'c_b_x': 5,
'c_b_y': 10,
'd': [1, 2, 3]}
Basically the same way you would flatten a nested list, you just have to do the extra work for iterating the dict by key/value, creating new keys for your new dictionary and creating the dictionary at final step.
import collections
def flatten(d, parent_key='', sep='_'):
items = []
for k, v in d.items():
new_key = parent_key + sep + k if parent_key else k
if isinstance(v, collections.MutableMapping):
items.extend(flatten(v, new_key, sep=sep).items())
else:
items.append((new_key, v))
return dict(items)
>>> flatten({'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]})
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
For Python >= 3.3, change the import to from collections.abc import MutableMapping to avoid a deprecation warning and change collections.MutableMapping to just MutableMapping.
Or if you are already using pandas, You can do it with json_normalize() like so:
import pandas as pd
d = {'a': 1,
'c': {'a': 2, 'b': {'x': 5, 'y' : 10}},
'd': [1, 2, 3]}
df = pd.json_normalize(d, sep='_')
print(df.to_dict(orient='records')[0])
Output:
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'c_b_y': 10, 'd': [1, 2, 3]}
There are two big considerations that the original poster needs to consider:
Are there keyspace clobbering issues? For example, {'a_b':{'c':1}, 'a':{'b_c':2}} would result in {'a_b_c':???}. The below solution evades the problem by returning an iterable of pairs.
If performance is an issue, does the key-reducer function (which I hereby refer to as 'join') require access to the entire key-path, or can it just do O(1) work at every node in the tree? If you want to be able to say joinedKey = '_'.join(*keys), that will cost you O(N^2) running time. However if you're willing to say nextKey = previousKey+'_'+thisKey, that gets you O(N) time. The solution below lets you do both (since you could merely concatenate all the keys, then postprocess them).
(Performance is not likely an issue, but I'll elaborate on the second point in case anyone else cares: In implementing this, there are numerous dangerous choices. If you do this recursively and yield and re-yield, or anything equivalent which touches nodes more than once (which is quite easy to accidentally do), you are doing potentially O(N^2) work rather than O(N). This is because maybe you are calculating a key a then a_1 then a_1_i..., and then calculating a then a_1 then a_1_ii..., but really you shouldn't have to calculate a_1 again. Even if you aren't recalculating it, re-yielding it (a 'level-by-level' approach) is just as bad. A good example is to think about the performance on {1:{1:{1:{1:...(N times)...{1:SOME_LARGE_DICTIONARY_OF_SIZE_N}...}}}})
Below is a function I wrote flattenDict(d, join=..., lift=...) which can be adapted to many purposes and can do what you want. Sadly it is fairly hard to make a lazy version of this function without incurring the above performance penalties (many python builtins like chain.from_iterable aren't actually efficient, which I only realized after extensive testing of three different versions of this code before settling on this one).
from collections import Mapping
from itertools import chain
from operator import add
_FLAG_FIRST = object()
def flattenDict(d, join=add, lift=lambda x:(x,)):
results = []
def visit(subdict, results, partialKey):
for k,v in subdict.items():
newKey = lift(k) if partialKey==_FLAG_FIRST else join(partialKey,lift(k))
if isinstance(v,Mapping):
visit(v, results, newKey)
else:
results.append((newKey,v))
visit(d, results, _FLAG_FIRST)
return results
To better understand what's going on, below is a diagram for those unfamiliar with reduce(left), otherwise known as "fold left". Sometimes it is drawn with an initial value in place of k0 (not part of the list, passed into the function). Here, J is our join function. We preprocess each kn with lift(k).
[k0,k1,...,kN].foldleft(J)
/ \
... kN
/
J(k0,J(k1,J(k2,k3)))
/ \
/ \
J(J(k0,k1),k2) k3
/ \
/ \
J(k0,k1) k2
/ \
/ \
k0 k1
This is in fact the same as functools.reduce, but where our function does this to all key-paths of the tree.
>>> reduce(lambda a,b:(a,b), range(5))
((((0, 1), 2), 3), 4)
Demonstration (which I'd otherwise put in docstring):
>>> testData = {
'a':1,
'b':2,
'c':{
'aa':11,
'bb':22,
'cc':{
'aaa':111
}
}
}
from pprint import pprint as pp
>>> pp(dict( flattenDict(testData) ))
{('a',): 1,
('b',): 2,
('c', 'aa'): 11,
('c', 'bb'): 22,
('c', 'cc', 'aaa'): 111}
>>> pp(dict( flattenDict(testData, join=lambda a,b:a+'_'+b, lift=lambda x:x) ))
{'a': 1, 'b': 2, 'c_aa': 11, 'c_bb': 22, 'c_cc_aaa': 111}
>>> pp(dict( (v,k) for k,v in flattenDict(testData, lift=hash, join=lambda a,b:hash((a,b))) ))
{1: 12416037344,
2: 12544037731,
11: 5470935132935744593,
22: 4885734186131977315,
111: 3461911260025554326}
Performance:
from functools import reduce
def makeEvilDict(n):
return reduce(lambda acc,x:{x:acc}, [{i:0 for i in range(n)}]+range(n))
import timeit
def time(runnable):
t0 = timeit.default_timer()
_ = runnable()
t1 = timeit.default_timer()
print('took {:.2f} seconds'.format(t1-t0))
>>> pp(makeEvilDict(8))
{7: {6: {5: {4: {3: {2: {1: {0: {0: 0,
1: 0,
2: 0,
3: 0,
4: 0,
5: 0,
6: 0,
7: 0}}}}}}}}}
import sys
sys.setrecursionlimit(1000000)
forget = lambda a,b:''
>>> time(lambda: dict(flattenDict(makeEvilDict(10000), join=forget)) )
took 0.10 seconds
>>> time(lambda: dict(flattenDict(makeEvilDict(100000), join=forget)) )
[1] 12569 segmentation fault python
... sigh, don't think that one is my fault...
[unimportant historical note due to moderation issues]
Regarding the alleged duplicate of Flatten a dictionary of dictionaries (2 levels deep) of lists
That question's solution can be implemented in terms of this one by doing sorted( sum(flatten(...),[]) ). The reverse is not possible: while it is true that the values of flatten(...) can be recovered from the alleged duplicate by mapping a higher-order accumulator, one cannot recover the keys. (edit: Also it turns out that the alleged duplicate owner's question is completely different, in that it only deals with dictionaries exactly 2-level deep, though one of the answers on that page gives a general solution.)
If you're using pandas there is a function hidden in pandas.io.json._normalize1 called nested_to_record which does this exactly.
from pandas.io.json._normalize import nested_to_record
flat = nested_to_record(my_dict, sep='_')
1 In pandas versions 0.24.x and older use pandas.io.json.normalize (without the _)
Here is a kind of a "functional", "one-liner" implementation. It is recursive, and based on a conditional expression and a dict comprehension.
def flatten_dict(dd, separator='_', prefix=''):
return { prefix + separator + k if prefix else k : v
for kk, vv in dd.items()
for k, v in flatten_dict(vv, separator, kk).items()
} if isinstance(dd, dict) else { prefix : dd }
Test:
In [2]: flatten_dict({'abc':123, 'hgf':{'gh':432, 'yu':433}, 'gfd':902, 'xzxzxz':{"432":{'0b0b0b':231}, "43234":1321}}, '.')
Out[2]:
{'abc': 123,
'gfd': 902,
'hgf.gh': 432,
'hgf.yu': 433,
'xzxzxz.432.0b0b0b': 231,
'xzxzxz.43234': 1321}
Not exactly what the OP asked, but lots of folks are coming here looking for ways to flatten real-world nested JSON data which can have nested key-value json objects and arrays and json objects inside the arrays and so on. JSON doesn't include tuples, so we don't have to fret over those.
I found an implementation of the list-inclusion comment by #roneo to the answer posted by #Imran :
https://github.com/ScriptSmith/socialreaper/blob/master/socialreaper/tools.py#L8
import collections
def flatten(dictionary, parent_key=False, separator='.'):
"""
Turn a nested dictionary into a flattened dictionary
:param dictionary: The dictionary to flatten
:param parent_key: The string to prepend to dictionary's keys
:param separator: The string used to separate flattened keys
:return: A flattened dictionary
"""
items = []
for key, value in dictionary.items():
new_key = str(parent_key) + separator + key if parent_key else key
if isinstance(value, collections.MutableMapping):
items.extend(flatten(value, new_key, separator).items())
elif isinstance(value, list):
for k, v in enumerate(value):
items.extend(flatten({str(k): v}, new_key).items())
else:
items.append((new_key, value))
return dict(items)
Test it:
flatten({'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3] })
>> {'a': 1, 'c.a': 2, 'c.b.x': 5, 'c.b.y': 10, 'd.0': 1, 'd.1': 2, 'd.2': 3}
Annd that does the job I need done: I throw any complicated json at this and it flattens it out for me.
All credits to https://github.com/ScriptSmith .
Code:
test = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]}
def parse_dict(init, lkey=''):
ret = {}
for rkey,val in init.items():
key = lkey+rkey
if isinstance(val, dict):
ret.update(parse_dict(val, key+'_'))
else:
ret[key] = val
return ret
print(parse_dict(test,''))
Results:
$ python test.py
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
I am using python3.2, update for your version of python.
This is not restricted to dictionaries, but every mapping type that implements .items(). Further ist faster as it avoides an if condition. Nevertheless credits go to Imran:
def flatten(d, parent_key=''):
items = []
for k, v in d.items():
try:
items.extend(flatten(v, '%s%s_' % (parent_key, k)).items())
except AttributeError:
items.append(('%s%s' % (parent_key, k), v))
return dict(items)
How about a functional and performant solution in Python3.5?
from functools import reduce
def _reducer(items, key, val, pref):
if isinstance(val, dict):
return {**items, **flatten(val, pref + key)}
else:
return {**items, pref + key: val}
def flatten(d, pref=''):
return(reduce(
lambda new_d, kv: _reducer(new_d, *kv, pref),
d.items(),
{}
))
This is even more performant:
def flatten(d, pref=''):
return(reduce(
lambda new_d, kv: \
isinstance(kv[1], dict) and \
{**new_d, **flatten(kv[1], pref + kv[0])} or \
{**new_d, pref + kv[0]: kv[1]},
d.items(),
{}
))
In use:
my_obj = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y': 10}}, 'd': [1, 2, 3]}
print(flatten(my_obj))
# {'d': [1, 2, 3], 'cby': 10, 'cbx': 5, 'ca': 2, 'a': 1}
If you are a fan of pythonic oneliners:
my_dict={'a': 1,'c': {'a': 2,'b': {'x': 5,'y' : 10}},'d': [1, 2, 3]}
list(pd.json_normalize(my_dict).T.to_dict().values())[0]
returns:
{'a': 1, 'c.a': 2, 'c.b.x': 5, 'c.b.y': 10, 'd': [1, 2, 3]}
You can leave the [0] from the end, if you have a list of dictionaries and not just a single dictionary.
My Python 3.3 Solution using generators:
def flattenit(pyobj, keystring=''):
if type(pyobj) is dict:
if (type(pyobj) is dict):
keystring = keystring + "_" if keystring else keystring
for k in pyobj:
yield from flattenit(pyobj[k], keystring + k)
elif (type(pyobj) is list):
for lelm in pyobj:
yield from flatten(lelm, keystring)
else:
yield keystring, pyobj
my_obj = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y': 10}}, 'd': [1, 2, 3]}
#your flattened dictionary object
flattened={k:v for k,v in flattenit(my_obj)}
print(flattened)
# result: {'c_b_y': 10, 'd': [1, 2, 3], 'c_a': 2, 'a': 1, 'c_b_x': 5}
Utilizing recursion, keeping it simple and human readable:
def flatten_dict(dictionary, accumulator=None, parent_key=None, separator="."):
if accumulator is None:
accumulator = {}
for k, v in dictionary.items():
k = f"{parent_key}{separator}{k}" if parent_key else k
if isinstance(v, dict):
flatten_dict(dictionary=v, accumulator=accumulator, parent_key=k)
continue
accumulator[k] = v
return accumulator
Call is simple:
new_dict = flatten_dict(dictionary)
or
new_dict = flatten_dict(dictionary, separator="_")
if we want to change the default separator.
A little breakdown:
When the function is first called, it is called only passing the dictionary we want to flatten. The accumulator parameter is here to support recursion, which we see later. So, we instantiate accumulator to an empty dictionary where we will put all of the nested values from the original dictionary.
if accumulator is None:
accumulator = {}
As we iterate over the dictionary's values, we construct a key for every value. The parent_key argument will be None for the first call, while for every nested dictionary, it will contain the key pointing to it, so we prepend that key.
k = f"{parent_key}{separator}{k}" if parent_key else k
In case the value v the key k is pointing to is a dictionary, the function calls itself, passing the nested dictionary, the accumulator (which is passed by reference, so all changes done to it are done on the same instance) and the key k so that we can construct the concatenated key. Notice the continue statement. We want to skip the next line, outside of the if block, so that the nested dictionary doesn't end up in the accumulator under key k.
if isinstance(v, dict):
flatten_dict(dict=v, accumulator=accumulator, parent_key=k)
continue
So, what do we do in case the value v is not a dictionary? Just put it unchanged inside the accumulator.
accumulator[k] = v
Once we're done we just return the accumulator, leaving the original dictionary argument untouched.
NOTE
This will work only with dictionaries that have strings as keys. It will work with hashable objects implementing the __repr__ method, but will yield unwanted results.
Simple function to flatten nested dictionaries. For Python 3, replace .iteritems() with .items()
def flatten_dict(init_dict):
res_dict = {}
if type(init_dict) is not dict:
return res_dict
for k, v in init_dict.iteritems():
if type(v) == dict:
res_dict.update(flatten_dict(v))
else:
res_dict[k] = v
return res_dict
The idea/requirement was:
Get flat dictionaries with no keeping parent keys.
Example of usage:
dd = {'a': 3,
'b': {'c': 4, 'd': 5},
'e': {'f':
{'g': 1, 'h': 2}
},
'i': 9,
}
flatten_dict(dd)
>> {'a': 3, 'c': 4, 'd': 5, 'g': 1, 'h': 2, 'i': 9}
Keeping parent keys is simple as well.
I was thinking of a subclass of UserDict to automagically flat the keys.
class FlatDict(UserDict):
def __init__(self, *args, separator='.', **kwargs):
self.separator = separator
super().__init__(*args, **kwargs)
def __setitem__(self, key, value):
if isinstance(value, dict):
for k1, v1 in FlatDict(value, separator=self.separator).items():
super().__setitem__(f"{key}{self.separator}{k1}", v1)
else:
super().__setitem__(key, value)
The advantages it that keys can be added on the fly, or using standard dict instanciation, without surprise:
>>> fd = FlatDict(
... {
... 'person': {
... 'sexe': 'male',
... 'name': {
... 'first': 'jacques',
... 'last': 'dupond'
... }
... }
... }
... )
>>> fd
{'person.sexe': 'male', 'person.name.first': 'jacques', 'person.name.last': 'dupond'}
>>> fd['person'] = {'name': {'nickname': 'Bob'}}
>>> fd
{'person.sexe': 'male', 'person.name.first': 'jacques', 'person.name.last': 'dupond', 'person.name.nickname': 'Bob'}
>>> fd['person.name'] = {'civility': 'Dr'}
>>> fd
{'person.sexe': 'male', 'person.name.first': 'jacques', 'person.name.last': 'dupond', 'person.name.nickname': 'Bob', 'person.name.civility': 'Dr'}
This is similar to both imran's and ralu's answer. It does not use a generator, but instead employs recursion with a closure:
def flatten_dict(d, separator='_'):
final = {}
def _flatten_dict(obj, parent_keys=[]):
for k, v in obj.iteritems():
if isinstance(v, dict):
_flatten_dict(v, parent_keys + [k])
else:
key = separator.join(parent_keys + [k])
final[key] = v
_flatten_dict(d)
return final
>>> print flatten_dict({'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]})
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
The answers above work really well. Just thought I'd add the unflatten function that I wrote:
def unflatten(d):
ud = {}
for k, v in d.items():
context = ud
for sub_key in k.split('_')[:-1]:
if sub_key not in context:
context[sub_key] = {}
context = context[sub_key]
context[k.split('_')[-1]] = v
return ud
Note: This doesn't account for '_' already present in keys, much like the flatten counterparts.
Davoud's solution is very nice but doesn't give satisfactory results when the nested dict also contains lists of dicts, but his code be adapted for that case:
def flatten_dict(d):
items = []
for k, v in d.items():
try:
if (type(v)==type([])):
for l in v: items.extend(flatten_dict(l).items())
else:
items.extend(flatten_dict(v).items())
except AttributeError:
items.append((k, v))
return dict(items)
def flatten(unflattened_dict, separator='_'):
flattened_dict = {}
for k, v in unflattened_dict.items():
if isinstance(v, dict):
sub_flattened_dict = flatten(v, separator)
for k2, v2 in sub_flattened_dict.items():
flattened_dict[k + separator + k2] = v2
else:
flattened_dict[k] = v
return flattened_dict
I actually wrote a package called cherrypicker recently to deal with this exact sort of thing since I had to do it so often!
I think the following code would give you exactly what you're after:
from cherrypicker import CherryPicker
dct = {
'a': 1,
'c': {
'a': 2,
'b': {
'x': 5,
'y' : 10
}
},
'd': [1, 2, 3]
}
picker = CherryPicker(dct)
picker.flatten().get()
You can install the package with:
pip install cherrypicker
...and there's more docs and guidance at https://cherrypicker.readthedocs.io.
Other methods may be faster, but the priority of this package is to make such tasks easy. If you do have a large list of objects to flatten though, you can also tell CherryPicker to use parallel processing to speed things up.
here's a solution using a stack. No recursion.
def flatten_nested_dict(nested):
stack = list(nested.items())
ans = {}
while stack:
key, val = stack.pop()
if isinstance(val, dict):
for sub_key, sub_val in val.items():
stack.append((f"{key}_{sub_key}", sub_val))
else:
ans[key] = val
return ans
Using generators:
def flat_dic_helper(prepand,d):
if len(prepand) > 0:
prepand = prepand + "_"
for k in d:
i = d[k]
if isinstance(i, dict):
r = flat_dic_helper(prepand + k,i)
for j in r:
yield j
else:
yield (prepand + k,i)
def flat_dic(d):
return dict(flat_dic_helper("",d))
d = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]}
print(flat_dic(d))
>> {'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
Here's an algorithm for elegant, in-place replacement. Tested with Python 2.7 and Python 3.5. Using the dot character as a separator.
def flatten_json(json):
if type(json) == dict:
for k, v in list(json.items()):
if type(v) == dict:
flatten_json(v)
json.pop(k)
for k2, v2 in v.items():
json[k+"."+k2] = v2
Example:
d = {'a': {'b': 'c'}}
flatten_json(d)
print(d)
unflatten_json(d)
print(d)
Output:
{'a.b': 'c'}
{'a': {'b': 'c'}}
I published this code here along with the matching unflatten_json function.
If you want to flat nested dictionary and want all unique keys list then here is the solution:
def flat_dict_return_unique_key(data, unique_keys=set()):
if isinstance(data, dict):
[unique_keys.add(i) for i in data.keys()]
for each_v in data.values():
if isinstance(each_v, dict):
flat_dict_return_unique_key(each_v, unique_keys)
return list(set(unique_keys))
I always prefer access dict objects via .items(), so for flattening dicts I use the following recursive generator flat_items(d). If you like to have dict again, simply wrap it like this: flat = dict(flat_items(d))
def flat_items(d, key_separator='.'):
"""
Flattens the dictionary containing other dictionaries like here: https://stackoverflow.com/questions/6027558/flatten-nested-python-dictionaries-compressing-keys
>>> example = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]}
>>> flat = dict(flat_items(example, key_separator='_'))
>>> assert flat['c_b_y'] == 10
"""
for k, v in d.items():
if type(v) is dict:
for k1, v1 in flat_items(v, key_separator=key_separator):
yield key_separator.join((k, k1)), v1
else:
yield k, v
def flatten_nested_dict(_dict, _str=''):
'''
recursive function to flatten a nested dictionary json
'''
ret_dict = {}
for k, v in _dict.items():
if isinstance(v, dict):
ret_dict.update(flatten_nested_dict(v, _str = '_'.join([_str, k]).strip('_')))
elif isinstance(v, list):
for index, item in enumerate(v):
if isinstance(item, dict):
ret_dict.update(flatten_nested_dict(item, _str= '_'.join([_str, k, str(index)]).strip('_')))
else:
ret_dict['_'.join([_str, k, str(index)]).strip('_')] = item
else:
ret_dict['_'.join([_str, k]).strip('_')] = v
return ret_dict
Using dict.popitem() in straightforward nested-list-like recursion:
def flatten(d):
if d == {}:
return d
else:
k,v = d.popitem()
if (dict != type(v)):
return {k:v, **flatten(d)}
else:
flat_kv = flatten(v)
for k1 in list(flat_kv.keys()):
flat_kv[k + '_' + k1] = flat_kv[k1]
del flat_kv[k1]
return {**flat_kv, **flatten(d)}
If you do not mind recursive functions, here is a solution. I have also taken the liberty to include an exclusion-parameter in case there are one or more values you wish to maintain.
Code:
def flatten_dict(dictionary, exclude = [], delimiter ='_'):
flat_dict = dict()
for key, value in dictionary.items():
if isinstance(value, dict) and key not in exclude:
flatten_value_dict = flatten_dict(value, exclude, delimiter)
for k, v in flatten_value_dict.items():
flat_dict[f"{key}{delimiter}{k}"] = v
else:
flat_dict[key] = value
return flat_dict
Usage:
d = {'a':1, 'b':[1, 2], 'c':3, 'd':{'a':4, 'b':{'a':7, 'b':8}, 'c':6}, 'e':{'a':1,'b':2}}
flat_d = flatten_dict(dictionary=d, exclude=['e'], delimiter='.')
print(flat_d)
Output:
{'a': 1, 'b': [1, 2], 'c': 3, 'd.a': 4, 'd.b.a': 7, 'd.b.b': 8, 'd.c': 6, 'e': {'a': 1, 'b': 2}}
Variation of this Flatten nested dictionaries, compressing keys with max_level and custom reducer.
def flatten(d, max_level=None, reducer='tuple'):
if reducer == 'tuple':
reducer_seed = tuple()
reducer_func = lambda x, y: (*x, y)
else:
raise ValueError(f'Unknown reducer: {reducer}')
def impl(d, pref, level):
return reduce(
lambda new_d, kv:
(max_level is None or level < max_level)
and isinstance(kv[1], dict)
and {**new_d, **impl(kv[1], reducer_func(pref, kv[0]), level + 1)}
or {**new_d, reducer_func(pref, kv[0]): kv[1]},
d.items(),
{}
)
return impl(d, reducer_seed, 0)
I tried some of the solutions on this page - though not all - but those I tried failed to handle the nested list of dict.
Consider a dict like this:
d = {
'owner': {
'name': {'first_name': 'Steven', 'last_name': 'Smith'},
'lottery_nums': [1, 2, 3, 'four', '11', None],
'address': {},
'tuple': (1, 2, 'three'),
'tuple_with_dict': (1, 2, 'three', {'is_valid': False}),
'set': {1, 2, 3, 4, 'five'},
'children': [
{'name': {'first_name': 'Jessica',
'last_name': 'Smith', },
'children': []
},
{'name': {'first_name': 'George',
'last_name': 'Smith'},
'children': []
}
]
}
}
Here's my makeshift solution:
def flatten_dict(input_node: dict, key_: str = '', output_dict: dict = {}):
if isinstance(input_node, dict):
for key, val in input_node.items():
new_key = f"{key_}.{key}" if key_ else f"{key}"
flatten_dict(val, new_key, output_dict)
elif isinstance(input_node, list):
for idx, item in enumerate(input_node):
flatten_dict(item, f"{key_}.{idx}", output_dict)
else:
output_dict[key_] = input_node
return output_dict
which produces:
{
owner.name.first_name: Steven,
owner.name.last_name: Smith,
owner.lottery_nums.0: 1,
owner.lottery_nums.1: 2,
owner.lottery_nums.2: 3,
owner.lottery_nums.3: four,
owner.lottery_nums.4: 11,
owner.lottery_nums.5: None,
owner.tuple: (1, 2, 'three'),
owner.tuple_with_dict: (1, 2, 'three', {'is_valid': False}),
owner.set: {1, 2, 3, 4, 'five'},
owner.children.0.name.first_name: Jessica,
owner.children.0.name.last_name: Smith,
owner.children.1.name.first_name: George,
owner.children.1.name.last_name: Smith,
}
A makeshift solution and it's not perfect.
NOTE:
it doesn't keep empty dicts such as the address: {} k/v pair.
it won't flatten dicts in nested tuples - though it would be easy to add using the fact that python tuples act similar to lists.
You can use recursion in order to flatten your dictionary.
import collections
def flatten(
nested_dict,
seperator='.',
name=None,
):
flatten_dict = {}
if not nested_dict:
return flatten_dict
if isinstance(
nested_dict,
collections.abc.MutableMapping,
):
for key, value in nested_dict.items():
if name is not None:
flatten_dict.update(
flatten(
nested_dict=value,
seperator=seperator,
name=f'{name}{seperator}{key}',
),
)
else:
flatten_dict.update(
flatten(
nested_dict=value,
seperator=seperator,
name=key,
),
)
else:
flatten_dict[name] = nested_dict
return flatten_dict
if __name__ == '__main__':
nested_dict = {
1: 'a',
2: {
3: 'c',
4: {
5: 'e',
},
6: [1, 2, 3, 4, 5, ],
},
}
print(
flatten(
nested_dict=nested_dict,
),
)
Output:
{
"1":"a",
"2.3":"c",
"2.4.5":"e",
"2.6":[1, 2, 3, 4, 5]
}
Can I use list comprehension syntax to create a dictionary?
For example, by iterating over pairs of keys and values:
d = {... for k, v in zip(keys, values)}
Use a dict comprehension (Python 2.7 and later):
{key: value for (key, value) in iterable}
Alternatively for simpler cases or earlier version of Python, use the dict constructor, e.g.:
pairs = [('a', 1), ('b', 2)]
dict(pairs) #=> {'a': 1, 'b': 2}
dict([(k, v+1) for k, v in pairs]) #=> {'a': 2, 'b': 3}
Given separate arrays of keys and values, use the dict constructor with zip:
keys = ['a', 'b']
values = [1, 2]
dict(zip(keys, values)) #=> {'a': 1, 'b': 2}
2) "zip'ped" from two separate iterables of keys/vals
dict(zip(list_of_keys, list_of_values))
In Python 3 and Python 2.7+, dictionary comprehensions look like the below:
d = {k:v for k, v in iterable}
For Python 2.6 or earlier, see fortran's answer.
In fact, you don't even need to iterate over the iterable if it already comprehends some kind of mapping, the dict constructor doing it graciously for you:
>>> ts = [(1, 2), (3, 4), (5, 6)]
>>> dict(ts)
{1: 2, 3: 4, 5: 6}
>>> gen = ((i, i+1) for i in range(1, 6, 2))
>>> gen
<generator object <genexpr> at 0xb7201c5c>
>>> dict(gen)
{1: 2, 3: 4, 5: 6}
Create a dictionary with list comprehension in Python
I like the Python list comprehension syntax.
Can it be used to create dictionaries too? For example, by iterating
over pairs of keys and values:
mydict = {(k,v) for (k,v) in blah blah blah}
You're looking for the phrase "dict comprehension" - it's actually:
mydict = {k: v for k, v in iterable}
Assuming blah blah blah is an iterable of two-tuples - you're so close. Let's create some "blahs" like that:
blahs = [('blah0', 'blah'), ('blah1', 'blah'), ('blah2', 'blah'), ('blah3', 'blah')]
Dict comprehension syntax:
Now the syntax here is the mapping part. What makes this a dict comprehension instead of a set comprehension (which is what your pseudo-code approximates) is the colon, : like below:
mydict = {k: v for k, v in blahs}
And we see that it worked, and should retain insertion order as-of Python 3.7:
>>> mydict
{'blah0': 'blah', 'blah1': 'blah', 'blah2': 'blah', 'blah3': 'blah'}
In Python 2 and up to 3.6, order was not guaranteed:
>>> mydict
{'blah0': 'blah', 'blah1': 'blah', 'blah3': 'blah', 'blah2': 'blah'}
Adding a Filter:
All comprehensions feature a mapping component and a filtering component that you can provide with arbitrary expressions.
So you can add a filter part to the end:
>>> mydict = {k: v for k, v in blahs if not int(k[-1]) % 2}
>>> mydict
{'blah0': 'blah', 'blah2': 'blah'}
Here we are just testing for if the last character is divisible by 2 to filter out data before mapping the keys and values.
In Python 2.7, it goes like:
>>> list1, list2 = ['a', 'b', 'c'], [1,2,3]
>>> dict( zip( list1, list2))
{'a': 1, 'c': 3, 'b': 2}
Zip them!
Python version >= 2.7, do the below:
d = {i: True for i in [1,2,3]}
Python version < 2.7(RIP, 3 July 2010 - 31 December 2019), do the below:
d = dict((i,True) for i in [1,2,3])
To add onto #fortran's answer, if you want to iterate over a list of keys key_list as well as a list of values value_list:
d = dict((key, value) for (key, value) in zip(key_list, value_list))
or
d = {(key, value) for (key, value) in zip(key_list, value_list)}
Just to throw in another example. Imagine you have the following list:
nums = [4,2,2,1,3]
and you want to turn it into a dict where the key is the index and value is the element in the list. You can do so with the following line of code:
{index:nums[index] for index in range(0,len(nums))}
Here is another example of dictionary creation using dict comprehension:
What i am tring to do here is to create a alphabet dictionary where each pair; is the english letter and its corresponding position in english alphabet
>>> import string
>>> dict1 = {value: (int(key) + 1) for key, value in
enumerate(list(string.ascii_lowercase))}
>>> dict1
{'a': 1, 'c': 3, 'b': 2, 'e': 5, 'd': 4, 'g': 7, 'f': 6, 'i': 9, 'h': 8,
'k': 11, 'j': 10, 'm': 13, 'l': 12, 'o': 15, 'n': 14, 'q': 17, 'p': 16, 's':
19, 'r': 18, 'u': 21, 't': 20, 'w': 23, 'v': 22, 'y': 25, 'x': 24, 'z': 26}
>>>
Notice the use of enumerate here to get a list of alphabets and their indexes in the list and swapping the alphabets and indices to generate the key value pair for dictionary
Hope it gives a good idea of dictionary comp to you and encourages you to use it more often to make your code compact
This code will create dictionary using list comprehension for multiple lists with different values that can be used for pd.DataFrame()
#Multiple lists
model=['A', 'B', 'C', 'D']
launched=[1983,1984,1984,1984]
discontinued=[1986, 1985, 1984, 1986]
#Dictionary with list comprehension
keys=['model','launched','discontinued']
vals=[model, launched,discontinued]
data = {key:vals[n] for n, key in enumerate(keys)}
#Convert dict to dataframe
df=pd.DataFrame(data)
display(df)
enumerate will pass n to vals to match each key with its list
Try this,
def get_dic_from_two_lists(keys, values):
return { keys[i] : values[i] for i in range(len(keys)) }
Assume we have two lists country and capital
country = ['India', 'Pakistan', 'China']
capital = ['New Delhi', 'Islamabad', 'Beijing']
Then create dictionary from the two lists:
print get_dic_from_two_lists(country, capital)
The output is like this,
{'Pakistan': 'Islamabad', 'China': 'Beijing', 'India': 'New Delhi'}
Adding to #Ekhtiar answer, if you want to make look up dict from list, you can use this:
names = ['a', 'b', 'd', 'f', 'c']
names_to_id = {v:k for k, v in enumerate(names)}
# {'a': 0, 'b': 1, 'c': 2, 'd': 3, 'f': 4}
Or in rare case that you want to filter duplicate, use set first (best in list of number):
names = ['a', 'b', 'd', 'f', 'd', 'c']
sorted_list = list(set(names))
sorted_list.sort()
names_to_id = {v:k for k, v in enumerate(sorted_list)}
# {'a': 0, 'b': 1, 'c': 2, 'd': 3, 'f': 4}
names = [1,2,5,5,6,2,1]
names_to_id = {v:k for k, v in enumerate(set(names))}
# {1: 0, 2: 1, 5: 2, 6: 3}
>>> {k: v**3 for (k, v) in zip(string.ascii_lowercase, range(26))}
Python supports dict comprehensions, which allow you to express the creation of dictionaries at runtime using a similarly concise syntax.
A dictionary comprehension takes the form {key: value for (key, value) in iterable}. This syntax was introduced in Python 3 and backported as far as Python 2.7, so you should be able to use it regardless of which version of Python you have installed.
A canonical example is taking two lists and creating a dictionary where the item at each position in the first list becomes a key and the item at the corresponding position in the second list becomes the value.
The zip function used inside this comprehension returns an iterator of tuples, where each element in the tuple is taken from the same position in each of the input iterables. In the example above, the returned iterator contains the tuples (“a”, 1), (“b”, 2), etc.
Output:
{'i': 512, 'e': 64, 'o': 2744, 'h': 343, 'l': 1331, 's': 5832, 'b': 1, 'w': 10648, 'c': 8, 'x': 12167, 'y': 13824, 't': 6859, 'p': 3375, 'd': 27, 'j': 729, 'a': 0, 'z': 15625, 'f': 125, 'q': 4096, 'u': 8000, 'n': 2197, 'm': 1728, 'r': 4913, 'k': 1000, 'g': 216, 'v': 9261}
Yes, it's possible. In python, Comprehension can be used in List, Set, Dictionary, etc.
You can write it this way
mydict = {k:v for (k,v) in blah}
Another detailed example of Dictionary Comprehension with the Conditional Statement and Loop:
parents = [father, mother]
parents = {parent:1 - P["mutation"] if parent in two_genes else 0.5 if parent in one_gene else P["mutation"] for parent in parents}
You can create a new dict for each pair and merge it with the previous dict:
reduce(lambda p, q: {**p, **{q[0]: q[1]}}, bla bla bla, {})
Obviously this approaches requires reduce from functools.
Assuming blah blah blah is a two-tuples list:
Let's see two methods:
# method 1
>>> lst = [('a', 2), ('b', 4), ('c', 6)]
>>> dict(lst)
{'a': 2, 'b': 4, 'c': 6}
# method 2
>>> lst = [('a', 2), ('b', 4), ('c', 6)]
>>> d = {k:v for k, v in lst}
>>> d
{'a': 2, 'b': 4, 'c': 6}
this approach uses iteration over the given date using a for loop.
Syntax: {key: value for (key, value) in data}
Eg:
# create a list comprehension with country and code:
Country_code = [('China', 86), ('USA', 1),
('Ghana', 233), ('Uk', 44)]
# use iterable method to show results
{key: value for (key, value) in Country_code}
Suppose you have a dictionary like:
{'a': 1,
'c': {'a': 2,
'b': {'x': 5,
'y' : 10}},
'd': [1, 2, 3]}
How would you go about flattening that into something like:
{'a': 1,
'c_a': 2,
'c_b_x': 5,
'c_b_y': 10,
'd': [1, 2, 3]}
Basically the same way you would flatten a nested list, you just have to do the extra work for iterating the dict by key/value, creating new keys for your new dictionary and creating the dictionary at final step.
import collections
def flatten(d, parent_key='', sep='_'):
items = []
for k, v in d.items():
new_key = parent_key + sep + k if parent_key else k
if isinstance(v, collections.MutableMapping):
items.extend(flatten(v, new_key, sep=sep).items())
else:
items.append((new_key, v))
return dict(items)
>>> flatten({'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]})
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
For Python >= 3.3, change the import to from collections.abc import MutableMapping to avoid a deprecation warning and change collections.MutableMapping to just MutableMapping.
Or if you are already using pandas, You can do it with json_normalize() like so:
import pandas as pd
d = {'a': 1,
'c': {'a': 2, 'b': {'x': 5, 'y' : 10}},
'd': [1, 2, 3]}
df = pd.json_normalize(d, sep='_')
print(df.to_dict(orient='records')[0])
Output:
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'c_b_y': 10, 'd': [1, 2, 3]}
There are two big considerations that the original poster needs to consider:
Are there keyspace clobbering issues? For example, {'a_b':{'c':1}, 'a':{'b_c':2}} would result in {'a_b_c':???}. The below solution evades the problem by returning an iterable of pairs.
If performance is an issue, does the key-reducer function (which I hereby refer to as 'join') require access to the entire key-path, or can it just do O(1) work at every node in the tree? If you want to be able to say joinedKey = '_'.join(*keys), that will cost you O(N^2) running time. However if you're willing to say nextKey = previousKey+'_'+thisKey, that gets you O(N) time. The solution below lets you do both (since you could merely concatenate all the keys, then postprocess them).
(Performance is not likely an issue, but I'll elaborate on the second point in case anyone else cares: In implementing this, there are numerous dangerous choices. If you do this recursively and yield and re-yield, or anything equivalent which touches nodes more than once (which is quite easy to accidentally do), you are doing potentially O(N^2) work rather than O(N). This is because maybe you are calculating a key a then a_1 then a_1_i..., and then calculating a then a_1 then a_1_ii..., but really you shouldn't have to calculate a_1 again. Even if you aren't recalculating it, re-yielding it (a 'level-by-level' approach) is just as bad. A good example is to think about the performance on {1:{1:{1:{1:...(N times)...{1:SOME_LARGE_DICTIONARY_OF_SIZE_N}...}}}})
Below is a function I wrote flattenDict(d, join=..., lift=...) which can be adapted to many purposes and can do what you want. Sadly it is fairly hard to make a lazy version of this function without incurring the above performance penalties (many python builtins like chain.from_iterable aren't actually efficient, which I only realized after extensive testing of three different versions of this code before settling on this one).
from collections import Mapping
from itertools import chain
from operator import add
_FLAG_FIRST = object()
def flattenDict(d, join=add, lift=lambda x:(x,)):
results = []
def visit(subdict, results, partialKey):
for k,v in subdict.items():
newKey = lift(k) if partialKey==_FLAG_FIRST else join(partialKey,lift(k))
if isinstance(v,Mapping):
visit(v, results, newKey)
else:
results.append((newKey,v))
visit(d, results, _FLAG_FIRST)
return results
To better understand what's going on, below is a diagram for those unfamiliar with reduce(left), otherwise known as "fold left". Sometimes it is drawn with an initial value in place of k0 (not part of the list, passed into the function). Here, J is our join function. We preprocess each kn with lift(k).
[k0,k1,...,kN].foldleft(J)
/ \
... kN
/
J(k0,J(k1,J(k2,k3)))
/ \
/ \
J(J(k0,k1),k2) k3
/ \
/ \
J(k0,k1) k2
/ \
/ \
k0 k1
This is in fact the same as functools.reduce, but where our function does this to all key-paths of the tree.
>>> reduce(lambda a,b:(a,b), range(5))
((((0, 1), 2), 3), 4)
Demonstration (which I'd otherwise put in docstring):
>>> testData = {
'a':1,
'b':2,
'c':{
'aa':11,
'bb':22,
'cc':{
'aaa':111
}
}
}
from pprint import pprint as pp
>>> pp(dict( flattenDict(testData) ))
{('a',): 1,
('b',): 2,
('c', 'aa'): 11,
('c', 'bb'): 22,
('c', 'cc', 'aaa'): 111}
>>> pp(dict( flattenDict(testData, join=lambda a,b:a+'_'+b, lift=lambda x:x) ))
{'a': 1, 'b': 2, 'c_aa': 11, 'c_bb': 22, 'c_cc_aaa': 111}
>>> pp(dict( (v,k) for k,v in flattenDict(testData, lift=hash, join=lambda a,b:hash((a,b))) ))
{1: 12416037344,
2: 12544037731,
11: 5470935132935744593,
22: 4885734186131977315,
111: 3461911260025554326}
Performance:
from functools import reduce
def makeEvilDict(n):
return reduce(lambda acc,x:{x:acc}, [{i:0 for i in range(n)}]+range(n))
import timeit
def time(runnable):
t0 = timeit.default_timer()
_ = runnable()
t1 = timeit.default_timer()
print('took {:.2f} seconds'.format(t1-t0))
>>> pp(makeEvilDict(8))
{7: {6: {5: {4: {3: {2: {1: {0: {0: 0,
1: 0,
2: 0,
3: 0,
4: 0,
5: 0,
6: 0,
7: 0}}}}}}}}}
import sys
sys.setrecursionlimit(1000000)
forget = lambda a,b:''
>>> time(lambda: dict(flattenDict(makeEvilDict(10000), join=forget)) )
took 0.10 seconds
>>> time(lambda: dict(flattenDict(makeEvilDict(100000), join=forget)) )
[1] 12569 segmentation fault python
... sigh, don't think that one is my fault...
[unimportant historical note due to moderation issues]
Regarding the alleged duplicate of Flatten a dictionary of dictionaries (2 levels deep) of lists
That question's solution can be implemented in terms of this one by doing sorted( sum(flatten(...),[]) ). The reverse is not possible: while it is true that the values of flatten(...) can be recovered from the alleged duplicate by mapping a higher-order accumulator, one cannot recover the keys. (edit: Also it turns out that the alleged duplicate owner's question is completely different, in that it only deals with dictionaries exactly 2-level deep, though one of the answers on that page gives a general solution.)
If you're using pandas there is a function hidden in pandas.io.json._normalize1 called nested_to_record which does this exactly.
from pandas.io.json._normalize import nested_to_record
flat = nested_to_record(my_dict, sep='_')
1 In pandas versions 0.24.x and older use pandas.io.json.normalize (without the _)
Here is a kind of a "functional", "one-liner" implementation. It is recursive, and based on a conditional expression and a dict comprehension.
def flatten_dict(dd, separator='_', prefix=''):
return { prefix + separator + k if prefix else k : v
for kk, vv in dd.items()
for k, v in flatten_dict(vv, separator, kk).items()
} if isinstance(dd, dict) else { prefix : dd }
Test:
In [2]: flatten_dict({'abc':123, 'hgf':{'gh':432, 'yu':433}, 'gfd':902, 'xzxzxz':{"432":{'0b0b0b':231}, "43234":1321}}, '.')
Out[2]:
{'abc': 123,
'gfd': 902,
'hgf.gh': 432,
'hgf.yu': 433,
'xzxzxz.432.0b0b0b': 231,
'xzxzxz.43234': 1321}
Not exactly what the OP asked, but lots of folks are coming here looking for ways to flatten real-world nested JSON data which can have nested key-value json objects and arrays and json objects inside the arrays and so on. JSON doesn't include tuples, so we don't have to fret over those.
I found an implementation of the list-inclusion comment by #roneo to the answer posted by #Imran :
https://github.com/ScriptSmith/socialreaper/blob/master/socialreaper/tools.py#L8
import collections
def flatten(dictionary, parent_key=False, separator='.'):
"""
Turn a nested dictionary into a flattened dictionary
:param dictionary: The dictionary to flatten
:param parent_key: The string to prepend to dictionary's keys
:param separator: The string used to separate flattened keys
:return: A flattened dictionary
"""
items = []
for key, value in dictionary.items():
new_key = str(parent_key) + separator + key if parent_key else key
if isinstance(value, collections.MutableMapping):
items.extend(flatten(value, new_key, separator).items())
elif isinstance(value, list):
for k, v in enumerate(value):
items.extend(flatten({str(k): v}, new_key).items())
else:
items.append((new_key, value))
return dict(items)
Test it:
flatten({'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3] })
>> {'a': 1, 'c.a': 2, 'c.b.x': 5, 'c.b.y': 10, 'd.0': 1, 'd.1': 2, 'd.2': 3}
Annd that does the job I need done: I throw any complicated json at this and it flattens it out for me.
All credits to https://github.com/ScriptSmith .
Code:
test = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]}
def parse_dict(init, lkey=''):
ret = {}
for rkey,val in init.items():
key = lkey+rkey
if isinstance(val, dict):
ret.update(parse_dict(val, key+'_'))
else:
ret[key] = val
return ret
print(parse_dict(test,''))
Results:
$ python test.py
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
I am using python3.2, update for your version of python.
This is not restricted to dictionaries, but every mapping type that implements .items(). Further ist faster as it avoides an if condition. Nevertheless credits go to Imran:
def flatten(d, parent_key=''):
items = []
for k, v in d.items():
try:
items.extend(flatten(v, '%s%s_' % (parent_key, k)).items())
except AttributeError:
items.append(('%s%s' % (parent_key, k), v))
return dict(items)
How about a functional and performant solution in Python3.5?
from functools import reduce
def _reducer(items, key, val, pref):
if isinstance(val, dict):
return {**items, **flatten(val, pref + key)}
else:
return {**items, pref + key: val}
def flatten(d, pref=''):
return(reduce(
lambda new_d, kv: _reducer(new_d, *kv, pref),
d.items(),
{}
))
This is even more performant:
def flatten(d, pref=''):
return(reduce(
lambda new_d, kv: \
isinstance(kv[1], dict) and \
{**new_d, **flatten(kv[1], pref + kv[0])} or \
{**new_d, pref + kv[0]: kv[1]},
d.items(),
{}
))
In use:
my_obj = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y': 10}}, 'd': [1, 2, 3]}
print(flatten(my_obj))
# {'d': [1, 2, 3], 'cby': 10, 'cbx': 5, 'ca': 2, 'a': 1}
If you are a fan of pythonic oneliners:
my_dict={'a': 1,'c': {'a': 2,'b': {'x': 5,'y' : 10}},'d': [1, 2, 3]}
list(pd.json_normalize(my_dict).T.to_dict().values())[0]
returns:
{'a': 1, 'c.a': 2, 'c.b.x': 5, 'c.b.y': 10, 'd': [1, 2, 3]}
You can leave the [0] from the end, if you have a list of dictionaries and not just a single dictionary.
My Python 3.3 Solution using generators:
def flattenit(pyobj, keystring=''):
if type(pyobj) is dict:
if (type(pyobj) is dict):
keystring = keystring + "_" if keystring else keystring
for k in pyobj:
yield from flattenit(pyobj[k], keystring + k)
elif (type(pyobj) is list):
for lelm in pyobj:
yield from flatten(lelm, keystring)
else:
yield keystring, pyobj
my_obj = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y': 10}}, 'd': [1, 2, 3]}
#your flattened dictionary object
flattened={k:v for k,v in flattenit(my_obj)}
print(flattened)
# result: {'c_b_y': 10, 'd': [1, 2, 3], 'c_a': 2, 'a': 1, 'c_b_x': 5}
Utilizing recursion, keeping it simple and human readable:
def flatten_dict(dictionary, accumulator=None, parent_key=None, separator="."):
if accumulator is None:
accumulator = {}
for k, v in dictionary.items():
k = f"{parent_key}{separator}{k}" if parent_key else k
if isinstance(v, dict):
flatten_dict(dictionary=v, accumulator=accumulator, parent_key=k)
continue
accumulator[k] = v
return accumulator
Call is simple:
new_dict = flatten_dict(dictionary)
or
new_dict = flatten_dict(dictionary, separator="_")
if we want to change the default separator.
A little breakdown:
When the function is first called, it is called only passing the dictionary we want to flatten. The accumulator parameter is here to support recursion, which we see later. So, we instantiate accumulator to an empty dictionary where we will put all of the nested values from the original dictionary.
if accumulator is None:
accumulator = {}
As we iterate over the dictionary's values, we construct a key for every value. The parent_key argument will be None for the first call, while for every nested dictionary, it will contain the key pointing to it, so we prepend that key.
k = f"{parent_key}{separator}{k}" if parent_key else k
In case the value v the key k is pointing to is a dictionary, the function calls itself, passing the nested dictionary, the accumulator (which is passed by reference, so all changes done to it are done on the same instance) and the key k so that we can construct the concatenated key. Notice the continue statement. We want to skip the next line, outside of the if block, so that the nested dictionary doesn't end up in the accumulator under key k.
if isinstance(v, dict):
flatten_dict(dict=v, accumulator=accumulator, parent_key=k)
continue
So, what do we do in case the value v is not a dictionary? Just put it unchanged inside the accumulator.
accumulator[k] = v
Once we're done we just return the accumulator, leaving the original dictionary argument untouched.
NOTE
This will work only with dictionaries that have strings as keys. It will work with hashable objects implementing the __repr__ method, but will yield unwanted results.
Simple function to flatten nested dictionaries. For Python 3, replace .iteritems() with .items()
def flatten_dict(init_dict):
res_dict = {}
if type(init_dict) is not dict:
return res_dict
for k, v in init_dict.iteritems():
if type(v) == dict:
res_dict.update(flatten_dict(v))
else:
res_dict[k] = v
return res_dict
The idea/requirement was:
Get flat dictionaries with no keeping parent keys.
Example of usage:
dd = {'a': 3,
'b': {'c': 4, 'd': 5},
'e': {'f':
{'g': 1, 'h': 2}
},
'i': 9,
}
flatten_dict(dd)
>> {'a': 3, 'c': 4, 'd': 5, 'g': 1, 'h': 2, 'i': 9}
Keeping parent keys is simple as well.
I was thinking of a subclass of UserDict to automagically flat the keys.
class FlatDict(UserDict):
def __init__(self, *args, separator='.', **kwargs):
self.separator = separator
super().__init__(*args, **kwargs)
def __setitem__(self, key, value):
if isinstance(value, dict):
for k1, v1 in FlatDict(value, separator=self.separator).items():
super().__setitem__(f"{key}{self.separator}{k1}", v1)
else:
super().__setitem__(key, value)
The advantages it that keys can be added on the fly, or using standard dict instanciation, without surprise:
>>> fd = FlatDict(
... {
... 'person': {
... 'sexe': 'male',
... 'name': {
... 'first': 'jacques',
... 'last': 'dupond'
... }
... }
... }
... )
>>> fd
{'person.sexe': 'male', 'person.name.first': 'jacques', 'person.name.last': 'dupond'}
>>> fd['person'] = {'name': {'nickname': 'Bob'}}
>>> fd
{'person.sexe': 'male', 'person.name.first': 'jacques', 'person.name.last': 'dupond', 'person.name.nickname': 'Bob'}
>>> fd['person.name'] = {'civility': 'Dr'}
>>> fd
{'person.sexe': 'male', 'person.name.first': 'jacques', 'person.name.last': 'dupond', 'person.name.nickname': 'Bob', 'person.name.civility': 'Dr'}
This is similar to both imran's and ralu's answer. It does not use a generator, but instead employs recursion with a closure:
def flatten_dict(d, separator='_'):
final = {}
def _flatten_dict(obj, parent_keys=[]):
for k, v in obj.iteritems():
if isinstance(v, dict):
_flatten_dict(v, parent_keys + [k])
else:
key = separator.join(parent_keys + [k])
final[key] = v
_flatten_dict(d)
return final
>>> print flatten_dict({'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]})
{'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
The answers above work really well. Just thought I'd add the unflatten function that I wrote:
def unflatten(d):
ud = {}
for k, v in d.items():
context = ud
for sub_key in k.split('_')[:-1]:
if sub_key not in context:
context[sub_key] = {}
context = context[sub_key]
context[k.split('_')[-1]] = v
return ud
Note: This doesn't account for '_' already present in keys, much like the flatten counterparts.
Davoud's solution is very nice but doesn't give satisfactory results when the nested dict also contains lists of dicts, but his code be adapted for that case:
def flatten_dict(d):
items = []
for k, v in d.items():
try:
if (type(v)==type([])):
for l in v: items.extend(flatten_dict(l).items())
else:
items.extend(flatten_dict(v).items())
except AttributeError:
items.append((k, v))
return dict(items)
def flatten(unflattened_dict, separator='_'):
flattened_dict = {}
for k, v in unflattened_dict.items():
if isinstance(v, dict):
sub_flattened_dict = flatten(v, separator)
for k2, v2 in sub_flattened_dict.items():
flattened_dict[k + separator + k2] = v2
else:
flattened_dict[k] = v
return flattened_dict
I actually wrote a package called cherrypicker recently to deal with this exact sort of thing since I had to do it so often!
I think the following code would give you exactly what you're after:
from cherrypicker import CherryPicker
dct = {
'a': 1,
'c': {
'a': 2,
'b': {
'x': 5,
'y' : 10
}
},
'd': [1, 2, 3]
}
picker = CherryPicker(dct)
picker.flatten().get()
You can install the package with:
pip install cherrypicker
...and there's more docs and guidance at https://cherrypicker.readthedocs.io.
Other methods may be faster, but the priority of this package is to make such tasks easy. If you do have a large list of objects to flatten though, you can also tell CherryPicker to use parallel processing to speed things up.
here's a solution using a stack. No recursion.
def flatten_nested_dict(nested):
stack = list(nested.items())
ans = {}
while stack:
key, val = stack.pop()
if isinstance(val, dict):
for sub_key, sub_val in val.items():
stack.append((f"{key}_{sub_key}", sub_val))
else:
ans[key] = val
return ans
Using generators:
def flat_dic_helper(prepand,d):
if len(prepand) > 0:
prepand = prepand + "_"
for k in d:
i = d[k]
if isinstance(i, dict):
r = flat_dic_helper(prepand + k,i)
for j in r:
yield j
else:
yield (prepand + k,i)
def flat_dic(d):
return dict(flat_dic_helper("",d))
d = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]}
print(flat_dic(d))
>> {'a': 1, 'c_a': 2, 'c_b_x': 5, 'd': [1, 2, 3], 'c_b_y': 10}
Here's an algorithm for elegant, in-place replacement. Tested with Python 2.7 and Python 3.5. Using the dot character as a separator.
def flatten_json(json):
if type(json) == dict:
for k, v in list(json.items()):
if type(v) == dict:
flatten_json(v)
json.pop(k)
for k2, v2 in v.items():
json[k+"."+k2] = v2
Example:
d = {'a': {'b': 'c'}}
flatten_json(d)
print(d)
unflatten_json(d)
print(d)
Output:
{'a.b': 'c'}
{'a': {'b': 'c'}}
I published this code here along with the matching unflatten_json function.
If you want to flat nested dictionary and want all unique keys list then here is the solution:
def flat_dict_return_unique_key(data, unique_keys=set()):
if isinstance(data, dict):
[unique_keys.add(i) for i in data.keys()]
for each_v in data.values():
if isinstance(each_v, dict):
flat_dict_return_unique_key(each_v, unique_keys)
return list(set(unique_keys))
I always prefer access dict objects via .items(), so for flattening dicts I use the following recursive generator flat_items(d). If you like to have dict again, simply wrap it like this: flat = dict(flat_items(d))
def flat_items(d, key_separator='.'):
"""
Flattens the dictionary containing other dictionaries like here: https://stackoverflow.com/questions/6027558/flatten-nested-python-dictionaries-compressing-keys
>>> example = {'a': 1, 'c': {'a': 2, 'b': {'x': 5, 'y' : 10}}, 'd': [1, 2, 3]}
>>> flat = dict(flat_items(example, key_separator='_'))
>>> assert flat['c_b_y'] == 10
"""
for k, v in d.items():
if type(v) is dict:
for k1, v1 in flat_items(v, key_separator=key_separator):
yield key_separator.join((k, k1)), v1
else:
yield k, v
def flatten_nested_dict(_dict, _str=''):
'''
recursive function to flatten a nested dictionary json
'''
ret_dict = {}
for k, v in _dict.items():
if isinstance(v, dict):
ret_dict.update(flatten_nested_dict(v, _str = '_'.join([_str, k]).strip('_')))
elif isinstance(v, list):
for index, item in enumerate(v):
if isinstance(item, dict):
ret_dict.update(flatten_nested_dict(item, _str= '_'.join([_str, k, str(index)]).strip('_')))
else:
ret_dict['_'.join([_str, k, str(index)]).strip('_')] = item
else:
ret_dict['_'.join([_str, k]).strip('_')] = v
return ret_dict
Using dict.popitem() in straightforward nested-list-like recursion:
def flatten(d):
if d == {}:
return d
else:
k,v = d.popitem()
if (dict != type(v)):
return {k:v, **flatten(d)}
else:
flat_kv = flatten(v)
for k1 in list(flat_kv.keys()):
flat_kv[k + '_' + k1] = flat_kv[k1]
del flat_kv[k1]
return {**flat_kv, **flatten(d)}
If you do not mind recursive functions, here is a solution. I have also taken the liberty to include an exclusion-parameter in case there are one or more values you wish to maintain.
Code:
def flatten_dict(dictionary, exclude = [], delimiter ='_'):
flat_dict = dict()
for key, value in dictionary.items():
if isinstance(value, dict) and key not in exclude:
flatten_value_dict = flatten_dict(value, exclude, delimiter)
for k, v in flatten_value_dict.items():
flat_dict[f"{key}{delimiter}{k}"] = v
else:
flat_dict[key] = value
return flat_dict
Usage:
d = {'a':1, 'b':[1, 2], 'c':3, 'd':{'a':4, 'b':{'a':7, 'b':8}, 'c':6}, 'e':{'a':1,'b':2}}
flat_d = flatten_dict(dictionary=d, exclude=['e'], delimiter='.')
print(flat_d)
Output:
{'a': 1, 'b': [1, 2], 'c': 3, 'd.a': 4, 'd.b.a': 7, 'd.b.b': 8, 'd.c': 6, 'e': {'a': 1, 'b': 2}}
Variation of this Flatten nested dictionaries, compressing keys with max_level and custom reducer.
def flatten(d, max_level=None, reducer='tuple'):
if reducer == 'tuple':
reducer_seed = tuple()
reducer_func = lambda x, y: (*x, y)
else:
raise ValueError(f'Unknown reducer: {reducer}')
def impl(d, pref, level):
return reduce(
lambda new_d, kv:
(max_level is None or level < max_level)
and isinstance(kv[1], dict)
and {**new_d, **impl(kv[1], reducer_func(pref, kv[0]), level + 1)}
or {**new_d, reducer_func(pref, kv[0]): kv[1]},
d.items(),
{}
)
return impl(d, reducer_seed, 0)
I tried some of the solutions on this page - though not all - but those I tried failed to handle the nested list of dict.
Consider a dict like this:
d = {
'owner': {
'name': {'first_name': 'Steven', 'last_name': 'Smith'},
'lottery_nums': [1, 2, 3, 'four', '11', None],
'address': {},
'tuple': (1, 2, 'three'),
'tuple_with_dict': (1, 2, 'three', {'is_valid': False}),
'set': {1, 2, 3, 4, 'five'},
'children': [
{'name': {'first_name': 'Jessica',
'last_name': 'Smith', },
'children': []
},
{'name': {'first_name': 'George',
'last_name': 'Smith'},
'children': []
}
]
}
}
Here's my makeshift solution:
def flatten_dict(input_node: dict, key_: str = '', output_dict: dict = {}):
if isinstance(input_node, dict):
for key, val in input_node.items():
new_key = f"{key_}.{key}" if key_ else f"{key}"
flatten_dict(val, new_key, output_dict)
elif isinstance(input_node, list):
for idx, item in enumerate(input_node):
flatten_dict(item, f"{key_}.{idx}", output_dict)
else:
output_dict[key_] = input_node
return output_dict
which produces:
{
owner.name.first_name: Steven,
owner.name.last_name: Smith,
owner.lottery_nums.0: 1,
owner.lottery_nums.1: 2,
owner.lottery_nums.2: 3,
owner.lottery_nums.3: four,
owner.lottery_nums.4: 11,
owner.lottery_nums.5: None,
owner.tuple: (1, 2, 'three'),
owner.tuple_with_dict: (1, 2, 'three', {'is_valid': False}),
owner.set: {1, 2, 3, 4, 'five'},
owner.children.0.name.first_name: Jessica,
owner.children.0.name.last_name: Smith,
owner.children.1.name.first_name: George,
owner.children.1.name.last_name: Smith,
}
A makeshift solution and it's not perfect.
NOTE:
it doesn't keep empty dicts such as the address: {} k/v pair.
it won't flatten dicts in nested tuples - though it would be easy to add using the fact that python tuples act similar to lists.
You can use recursion in order to flatten your dictionary.
import collections
def flatten(
nested_dict,
seperator='.',
name=None,
):
flatten_dict = {}
if not nested_dict:
return flatten_dict
if isinstance(
nested_dict,
collections.abc.MutableMapping,
):
for key, value in nested_dict.items():
if name is not None:
flatten_dict.update(
flatten(
nested_dict=value,
seperator=seperator,
name=f'{name}{seperator}{key}',
),
)
else:
flatten_dict.update(
flatten(
nested_dict=value,
seperator=seperator,
name=key,
),
)
else:
flatten_dict[name] = nested_dict
return flatten_dict
if __name__ == '__main__':
nested_dict = {
1: 'a',
2: {
3: 'c',
4: {
5: 'e',
},
6: [1, 2, 3, 4, 5, ],
},
}
print(
flatten(
nested_dict=nested_dict,
),
)
Output:
{
"1":"a",
"2.3":"c",
"2.4.5":"e",
"2.6":[1, 2, 3, 4, 5]
}
For example I have two dicts:
Dict A: {'a': 1, 'b': 2, 'c': 3}
Dict B: {'b': 3, 'c': 4, 'd': 5}
I need a pythonic way of 'combining' two dicts such that the result is:
{'a': 1, 'b': 5, 'c': 7, 'd': 5}
That is to say: if a key appears in both dicts, add their values, if it appears in only one dict, keep its value.
Use collections.Counter:
>>> from collections import Counter
>>> A = Counter({'a':1, 'b':2, 'c':3})
>>> B = Counter({'b':3, 'c':4, 'd':5})
>>> A + B
Counter({'c': 7, 'b': 5, 'd': 5, 'a': 1})
Counters are basically a subclass of dict, so you can still do everything else with them you'd normally do with that type, such as iterate over their keys and values.
A more generic solution, which works for non-numeric values as well:
a = {'a': 'foo', 'b':'bar', 'c': 'baz'}
b = {'a': 'spam', 'c':'ham', 'x': 'blah'}
r = dict(a.items() + b.items() +
[(k, a[k] + b[k]) for k in set(b) & set(a)])
or even more generic:
def combine_dicts(a, b, op=operator.add):
return dict(a.items() + b.items() +
[(k, op(a[k], b[k])) for k in set(b) & set(a)])
For example:
>>> a = {'a': 2, 'b':3, 'c':4}
>>> b = {'a': 5, 'c':6, 'x':7}
>>> import operator
>>> print combine_dicts(a, b, operator.mul)
{'a': 10, 'x': 7, 'c': 24, 'b': 3}
>>> A = {'a':1, 'b':2, 'c':3}
>>> B = {'b':3, 'c':4, 'd':5}
>>> c = {x: A.get(x, 0) + B.get(x, 0) for x in set(A).union(B)}
>>> print(c)
{'a': 1, 'c': 7, 'b': 5, 'd': 5}
Intro:
There are the (probably) best solutions. But you have to know it and remember it and sometimes you have to hope that your Python version isn't too old or whatever the issue could be.
Then there are the most 'hacky' solutions. They are great and short but sometimes are hard to understand, to read and to remember.
There is, though, an alternative which is to to try to reinvent the wheel.
- Why reinventing the wheel?
- Generally because it's a really good way to learn (and sometimes just because the already-existing tool doesn't do exactly what you would like and/or the way you would like it) and the easiest way if you don't know or don't remember the perfect tool for your problem.
So, I propose to reinvent the wheel of the Counter class from the collections module (partially at least):
class MyDict(dict):
def __add__(self, oth):
r = self.copy()
try:
for key, val in oth.items():
if key in r:
r[key] += val # You can custom it here
else:
r[key] = val
except AttributeError: # In case oth isn't a dict
return NotImplemented # The convention when a case isn't handled
return r
a = MyDict({'a':1, 'b':2, 'c':3})
b = MyDict({'b':3, 'c':4, 'd':5})
print(a+b) # Output {'a':1, 'b': 5, 'c': 7, 'd': 5}
There would probably others way to implement that and there are already tools to do that but it's always nice to visualize how things would basically works.
Definitely summing the Counter()s is the most pythonic way to go in such cases but only if it results in a positive value. Here is an example and as you can see there is no c in result after negating the c's value in B dictionary.
In [1]: from collections import Counter
In [2]: A = Counter({'a':1, 'b':2, 'c':3})
In [3]: B = Counter({'b':3, 'c':-4, 'd':5})
In [4]: A + B
Out[4]: Counter({'d': 5, 'b': 5, 'a': 1})
That's because Counters were primarily designed to work with positive integers to represent running counts (negative count is meaningless). But to help with those use cases,python documents the minimum range and type restrictions as follows:
The Counter class itself is a dictionary
subclass with no restrictions on its keys and values. The values are
intended to be numbers representing counts, but you could store
anything in the value field.
The most_common() method requires only
that the values be orderable.
For in-place operations such as c[key]
+= 1, the value type need only support addition and subtraction. So fractions, floats, and decimals would work and negative values are
supported. The same is also true for update() and subtract() which
allow negative and zero values for both inputs and outputs.
The multiset methods are designed only for use cases with positive values.
The inputs may be negative or zero, but only outputs with positive
values are created. There are no type restrictions, but the value type
needs to support addition, subtraction, and comparison.
The elements() method requires integer counts. It ignores zero and negative counts.
So for getting around that problem after summing your Counter you can use Counter.update in order to get the desire output. It works like dict.update() but adds counts instead of replacing them.
In [24]: A.update(B)
In [25]: A
Out[25]: Counter({'d': 5, 'b': 5, 'a': 1, 'c': -1})
myDict = {}
for k in itertools.chain(A.keys(), B.keys()):
myDict[k] = A.get(k, 0)+B.get(k, 0)
The one with no extra imports!
Their is a pythonic standard called EAFP(Easier to Ask for Forgiveness than Permission). Below code is based on that python standard.
# The A and B dictionaries
A = {'a': 1, 'b': 2, 'c': 3}
B = {'b': 3, 'c': 4, 'd': 5}
# The final dictionary. Will contain the final outputs.
newdict = {}
# Make sure every key of A and B get into the final dictionary 'newdict'.
newdict.update(A)
newdict.update(B)
# Iterate through each key of A.
for i in A.keys():
# If same key exist on B, its values from A and B will add together and
# get included in the final dictionary 'newdict'.
try:
addition = A[i] + B[i]
newdict[i] = addition
# If current key does not exist in dictionary B, it will give a KeyError,
# catch it and continue looping.
except KeyError:
continue
EDIT: thanks to jerzyk for his improvement suggestions.
import itertools
import collections
dictA = {'a':1, 'b':2, 'c':3}
dictB = {'b':3, 'c':4, 'd':5}
new_dict = collections.defaultdict(int)
# use dict.items() instead of dict.iteritems() for Python3
for k, v in itertools.chain(dictA.iteritems(), dictB.iteritems()):
new_dict[k] += v
print dict(new_dict)
# OUTPUT
{'a': 1, 'c': 7, 'b': 5, 'd': 5}
OR
Alternative you can use Counter as #Martijn has mentioned above.
For a more generic and extensible way check mergedict. It uses singledispatch and can merge values based on its types.
Example:
from mergedict import MergeDict
class SumDict(MergeDict):
#MergeDict.dispatch(int)
def merge_int(this, other):
return this + other
d2 = SumDict({'a': 1, 'b': 'one'})
d2.merge({'a':2, 'b': 'two'})
assert d2 == {'a': 3, 'b': 'two'}
From python 3.5: merging and summing
Thanks to #tokeinizer_fsj that told me in a comment that I didn't get completely the meaning of the question (I thought that add meant just adding keys that eventually where different in the two dictinaries and, instead, i meant that the common key values should be summed). So I added that loop before the merging, so that the second dictionary contains the sum of the common keys. The last dictionary will be the one whose values will last in the new dictionary that is the result of the merging of the two, so I thing the problem is solved. The solution is valid from python 3.5 and following versions.
a = {
"a": 1,
"b": 2,
"c": 3
}
b = {
"a": 2,
"b": 3,
"d": 5
}
# Python 3.5
for key in b:
if key in a:
b[key] = b[key] + a[key]
c = {**a, **b}
print(c)
>>> c
{'a': 3, 'b': 5, 'c': 3, 'd': 5}
Reusable code
a = {'a': 1, 'b': 2, 'c': 3}
b = {'b': 3, 'c': 4, 'd': 5}
def mergsum(a, b):
for k in b:
if k in a:
b[k] = b[k] + a[k]
c = {**a, **b}
return c
print(mergsum(a, b))
Additionally, please note a.update( b ) is 2x faster than a + b
from collections import Counter
a = Counter({'menu': 20, 'good': 15, 'happy': 10, 'bar': 5})
b = Counter({'menu': 1, 'good': 1, 'bar': 3})
%timeit a + b;
## 100000 loops, best of 3: 8.62 µs per loop
## The slowest run took 4.04 times longer than the fastest. This could mean that an intermediate result is being cached.
%timeit a.update(b)
## 100000 loops, best of 3: 4.51 µs per loop
One line solution is to use dictionary comprehension.
C = { k: A.get(k,0) + B.get(k,0) for k in list(B.keys()) + list(A.keys()) }
def merge_with(f, xs, ys):
xs = a_copy_of(xs) # dict(xs), maybe generalizable?
for (y, v) in ys.iteritems():
xs[y] = v if y not in xs else f(xs[x], v)
merge_with((lambda x, y: x + y), A, B)
You could easily generalize this:
def merge_dicts(f, *dicts):
result = {}
for d in dicts:
for (k, v) in d.iteritems():
result[k] = v if k not in result else f(result[k], v)
Then it can take any number of dicts.
This is a simple solution for merging two dictionaries where += can be applied to the values, it has to iterate over a dictionary only once
a = {'a':1, 'b':2, 'c':3}
dicts = [{'b':3, 'c':4, 'd':5},
{'c':9, 'a':9, 'd':9}]
def merge_dicts(merged,mergedfrom):
for k,v in mergedfrom.items():
if k in merged:
merged[k] += v
else:
merged[k] = v
return merged
for dct in dicts:
a = merge_dicts(a,dct)
print (a)
#{'c': 16, 'b': 5, 'd': 14, 'a': 10}
Here's yet another option using dictionary comprehensions combined with the behavior of dict():
dict3 = dict(dict1, **{ k: v + dict1.get(k, 0) for k, v in dict2.items() })
# {'a': 4, 'b': 2, 'c': 7, 'g': 1}
From https://docs.python.org/3/library/stdtypes.html#dict:
https://docs.python.org/3/library/stdtypes.html#dict
and also
If keyword arguments are given, the keyword arguments and their values are added to the dictionary created from the positional argument.
The dict comprehension
**{ k: v + dict1.get(v, 0), v in dict2.items() }
handles adding dict1[1] to v. We don't need an explicit if here because the default value for our dict1.get can be set to 0 instead.
This solution is easy to use, it is used as a normal dictionary, but you can use the sum function.
class SumDict(dict):
def __add__(self, y):
return {x: self.get(x, 0) + y.get(x, 0) for x in set(self).union(y)}
A = SumDict({'a': 1, 'c': 2})
B = SumDict({'b': 3, 'c': 4}) # Also works: B = {'b': 3, 'c': 4}
print(A + B) # OUTPUT {'a': 1, 'b': 3, 'c': 6}
The above solutions are great for the scenario where you have a small number of Counters. If you have a big list of them though, something like this is much nicer:
from collections import Counter
A = Counter({'a':1, 'b':2, 'c':3})
B = Counter({'b':3, 'c':4, 'd':5})
C = Counter({'a': 5, 'e':3})
list_of_counts = [A, B, C]
total = sum(list_of_counts, Counter())
print(total)
# Counter({'c': 7, 'a': 6, 'b': 5, 'd': 5, 'e': 3})
The above solution is essentially summing the Counters by:
total = Counter()
for count in list_of_counts:
total += count
print(total)
# Counter({'c': 7, 'a': 6, 'b': 5, 'd': 5, 'e': 3})
This does the same thing but I think it always helps to see what it is effectively doing underneath.
What about:
def dict_merge_and_sum( d1, d2 ):
ret = d1
ret.update({ k:v + d2[k] for k,v in d1.items() if k in d2 })
ret.update({ k:v for k,v in d2.items() if k not in d1 })
return ret
A = {'a': 1, 'b': 2, 'c': 3}
B = {'b': 3, 'c': 4, 'd': 5}
print( dict_merge_and_sum( A, B ) )
Output:
{'d': 5, 'a': 1, 'c': 7, 'b': 5}
More conventional way to combine two dict. Using modules and tools are good but understanding the logic behind it will help in case you don't remember the tools.
Program to combine two dictionary adding values for common keys.
def combine_dict(d1,d2):
for key,value in d1.items():
if key in d2:
d2[key] += value
else:
d2[key] = value
return d2
combine_dict({'a':1, 'b':2, 'c':3},{'b':3, 'c':4, 'd':5})
output == {'b': 5, 'c': 7, 'd': 5, 'a': 1}
Here's a very general solution. You can deal with any number of dict + keys that are only in some dict + easily use any aggregation function you want:
def aggregate_dicts(dicts, operation=sum):
"""Aggregate a sequence of dictionaries using `operation`."""
all_keys = set().union(*[el.keys() for el in dicts])
return {k: operation([dic.get(k, None) for dic in dicts]) for k in all_keys}
example:
dicts_same_keys = [{'x': 0, 'y': 1}, {'x': 1, 'y': 2}, {'x': 2, 'y': 3}]
aggregate_dicts(dicts_same_keys, operation=sum)
#{'x': 3, 'y': 6}
example non-identical keys and generic aggregation:
dicts_diff_keys = [{'x': 0, 'y': 1}, {'x': 1, 'y': 2}, {'x': 2, 'y': 3, 'c': 4}]
def mean_no_none(l):
l_no_none = [el for el in l if el is not None]
return sum(l_no_none) / len(l_no_none)
aggregate_dicts(dicts_diff_keys, operation=mean_no_none)
# {'x': 1.0, 'c': 4.0, 'y': 2.0}
dict1 = {'a':1, 'b':2, 'c':3}
dict2 = {'a':3, 'g':1, 'c':4}
dict3 = {} # will store new values
for x in dict1:
if x in dict2: #sum values with same key
dict3[x] = dict1[x] +dict2[x]
else: #add the values from x to dict1
dict3[x] = dict1[x]
#search for new values not in a
for x in dict2:
if x not in dict1:
dict3[x] = dict2[x]
print(dict3) # {'a': 4, 'b': 2, 'c': 7, 'g': 1}
Merging three dicts a,b,c in a single line without any other modules or libs
If we have the three dicts
a = {"a":9}
b = {"b":7}
c = {'b': 2, 'd': 90}
Merge all with a single line and return a dict object using
c = dict(a.items() + b.items() + c.items())
Returning
{'a': 9, 'b': 2, 'd': 90}