I'm planning to deploy my Flask services with Gunicorn WSGI Server. However I could not get one part. I have a main Flask app and that main app calls the other Flask apps. My main purpose for using Gunicorn is to handle the incoming multiple/simultaneous requests by Gunicorn workers. Do I have to implement a different Gunicorn Server for each of the Flask apps so that they will also have multiple workers in case of incoming simultaneous requests, or there is no need for that? Thanks in advance.
When you implement the a single Flask server app with all of its endpoints, each gunicorn worker that is spawned for the app will be able to serve requests to all endpoints. You don't have to implement the same logic multiple times. Each endpoint can be served by multiple/all of the workers at the same time (unless you prevent it by yourself with locks etc..).
Related
Setting up Flask with uWSGI and Nginx can be difficult. I tried following this DigitalOcean tutorial and still had trouble. Even with buildout scripts it takes time, and I need to write instructions to follow next time.
If I don't expect a lot of traffic, or the app is private, does it make sense to run it without uWSGI? Flask can listen to a port. Can Nginx just forward requests?
Does it make sense to not use Nginx either, just running bare Flask app on a port?
When you "run Flask" you are actually running Werkzeug's development WSGI server, and passing your Flask app as the WSGI callable.
The development server is not intended for use in production. It is not designed to be particularly efficient, stable, or secure. It does not support all the possible features of a HTTP server.
Replace the Werkzeug dev server with a production-ready WSGI server such as Gunicorn or uWSGI when moving to production, no matter where the app will be available.
The answer is similar for "should I use a web server". WSGI servers happen to have HTTP servers but they will not be as good as a dedicated production HTTP server (Nginx, Apache, etc.).
Flask documents how to deploy in various ways. Many hosting providers also have documentation about deploying Python or Flask.
First create the app:
import flask
app = flask.Flask(__name__)
Then set up the routes, and then when you want to start the app:
import gevent.pywsgi
app_server = gevent.pywsgi.WSGIServer((host, port), app)
app_server.serve_forever()
Call this script to run the application rather than having to tell gunicorn or uWSGI to run it.
I wanted the utility of Flask to build a web application, but had trouble composing it with other elements. I eventually found that gevent.pywsgi.WSGIServer was what I needed. After the call to app_server.serve_forever(), call app_server.stop() when to exit the application.
In my deployment, my application is listening on localhost:port using Flask and gevent, and then I have Nginx reverse-proxying HTTPS requests to it.
You definitely need something like a production WSGI server such as Gunicorn, because the development server of Flask is meant for ease of development without much configuration for fine-tuning and optimization.
Eg. Gunicorn has a variety of configurations depending on the use case you are trying to solve. But the development flask server does not have these capabilities. In addition, these development servers show their limitations as soon as you try to scale and handle more requests.
With respect to needing a reverse proxy server such as Nginx is concerned it depends on your use case.
If you are deploying your application behind the latest load balancer in AWS such as an application load balancer(NOT classic load balancer), that itself will suffice for most use cases. No need to take effort into setting up NGINX if you have that option.
The purpose of a reverse proxy is to handle slow clients, meaning clients which take time to send the request. These reverse load balancers buffer the requests till the entire request is got from the clients and send them async to Gunicorn. This improves the performance of your application considerably.
Setting up Flask with uWSGI and Nginx can be difficult. I tried following this DigitalOcean tutorial and still had trouble. Even with buildout scripts it takes time, and I need to write instructions to follow next time.
If I don't expect a lot of traffic, or the app is private, does it make sense to run it without uWSGI? Flask can listen to a port. Can Nginx just forward requests?
Does it make sense to not use Nginx either, just running bare Flask app on a port?
When you "run Flask" you are actually running Werkzeug's development WSGI server, and passing your Flask app as the WSGI callable.
The development server is not intended for use in production. It is not designed to be particularly efficient, stable, or secure. It does not support all the possible features of a HTTP server.
Replace the Werkzeug dev server with a production-ready WSGI server such as Gunicorn or uWSGI when moving to production, no matter where the app will be available.
The answer is similar for "should I use a web server". WSGI servers happen to have HTTP servers but they will not be as good as a dedicated production HTTP server (Nginx, Apache, etc.).
Flask documents how to deploy in various ways. Many hosting providers also have documentation about deploying Python or Flask.
First create the app:
import flask
app = flask.Flask(__name__)
Then set up the routes, and then when you want to start the app:
import gevent.pywsgi
app_server = gevent.pywsgi.WSGIServer((host, port), app)
app_server.serve_forever()
Call this script to run the application rather than having to tell gunicorn or uWSGI to run it.
I wanted the utility of Flask to build a web application, but had trouble composing it with other elements. I eventually found that gevent.pywsgi.WSGIServer was what I needed. After the call to app_server.serve_forever(), call app_server.stop() when to exit the application.
In my deployment, my application is listening on localhost:port using Flask and gevent, and then I have Nginx reverse-proxying HTTPS requests to it.
You definitely need something like a production WSGI server such as Gunicorn, because the development server of Flask is meant for ease of development without much configuration for fine-tuning and optimization.
Eg. Gunicorn has a variety of configurations depending on the use case you are trying to solve. But the development flask server does not have these capabilities. In addition, these development servers show their limitations as soon as you try to scale and handle more requests.
With respect to needing a reverse proxy server such as Nginx is concerned it depends on your use case.
If you are deploying your application behind the latest load balancer in AWS such as an application load balancer(NOT classic load balancer), that itself will suffice for most use cases. No need to take effort into setting up NGINX if you have that option.
The purpose of a reverse proxy is to handle slow clients, meaning clients which take time to send the request. These reverse load balancers buffer the requests till the entire request is got from the clients and send them async to Gunicorn. This improves the performance of your application considerably.
Setting up Flask with uWSGI and Nginx can be difficult. I tried following this DigitalOcean tutorial and still had trouble. Even with buildout scripts it takes time, and I need to write instructions to follow next time.
If I don't expect a lot of traffic, or the app is private, does it make sense to run it without uWSGI? Flask can listen to a port. Can Nginx just forward requests?
Does it make sense to not use Nginx either, just running bare Flask app on a port?
When you "run Flask" you are actually running Werkzeug's development WSGI server, and passing your Flask app as the WSGI callable.
The development server is not intended for use in production. It is not designed to be particularly efficient, stable, or secure. It does not support all the possible features of a HTTP server.
Replace the Werkzeug dev server with a production-ready WSGI server such as Gunicorn or uWSGI when moving to production, no matter where the app will be available.
The answer is similar for "should I use a web server". WSGI servers happen to have HTTP servers but they will not be as good as a dedicated production HTTP server (Nginx, Apache, etc.).
Flask documents how to deploy in various ways. Many hosting providers also have documentation about deploying Python or Flask.
First create the app:
import flask
app = flask.Flask(__name__)
Then set up the routes, and then when you want to start the app:
import gevent.pywsgi
app_server = gevent.pywsgi.WSGIServer((host, port), app)
app_server.serve_forever()
Call this script to run the application rather than having to tell gunicorn or uWSGI to run it.
I wanted the utility of Flask to build a web application, but had trouble composing it with other elements. I eventually found that gevent.pywsgi.WSGIServer was what I needed. After the call to app_server.serve_forever(), call app_server.stop() when to exit the application.
In my deployment, my application is listening on localhost:port using Flask and gevent, and then I have Nginx reverse-proxying HTTPS requests to it.
You definitely need something like a production WSGI server such as Gunicorn, because the development server of Flask is meant for ease of development without much configuration for fine-tuning and optimization.
Eg. Gunicorn has a variety of configurations depending on the use case you are trying to solve. But the development flask server does not have these capabilities. In addition, these development servers show their limitations as soon as you try to scale and handle more requests.
With respect to needing a reverse proxy server such as Nginx is concerned it depends on your use case.
If you are deploying your application behind the latest load balancer in AWS such as an application load balancer(NOT classic load balancer), that itself will suffice for most use cases. No need to take effort into setting up NGINX if you have that option.
The purpose of a reverse proxy is to handle slow clients, meaning clients which take time to send the request. These reverse load balancers buffer the requests till the entire request is got from the clients and send them async to Gunicorn. This improves the performance of your application considerably.
Setting up Flask with uWSGI and Nginx can be difficult. I tried following this DigitalOcean tutorial and still had trouble. Even with buildout scripts it takes time, and I need to write instructions to follow next time.
If I don't expect a lot of traffic, or the app is private, does it make sense to run it without uWSGI? Flask can listen to a port. Can Nginx just forward requests?
Does it make sense to not use Nginx either, just running bare Flask app on a port?
When you "run Flask" you are actually running Werkzeug's development WSGI server, and passing your Flask app as the WSGI callable.
The development server is not intended for use in production. It is not designed to be particularly efficient, stable, or secure. It does not support all the possible features of a HTTP server.
Replace the Werkzeug dev server with a production-ready WSGI server such as Gunicorn or uWSGI when moving to production, no matter where the app will be available.
The answer is similar for "should I use a web server". WSGI servers happen to have HTTP servers but they will not be as good as a dedicated production HTTP server (Nginx, Apache, etc.).
Flask documents how to deploy in various ways. Many hosting providers also have documentation about deploying Python or Flask.
First create the app:
import flask
app = flask.Flask(__name__)
Then set up the routes, and then when you want to start the app:
import gevent.pywsgi
app_server = gevent.pywsgi.WSGIServer((host, port), app)
app_server.serve_forever()
Call this script to run the application rather than having to tell gunicorn or uWSGI to run it.
I wanted the utility of Flask to build a web application, but had trouble composing it with other elements. I eventually found that gevent.pywsgi.WSGIServer was what I needed. After the call to app_server.serve_forever(), call app_server.stop() when to exit the application.
In my deployment, my application is listening on localhost:port using Flask and gevent, and then I have Nginx reverse-proxying HTTPS requests to it.
You definitely need something like a production WSGI server such as Gunicorn, because the development server of Flask is meant for ease of development without much configuration for fine-tuning and optimization.
Eg. Gunicorn has a variety of configurations depending on the use case you are trying to solve. But the development flask server does not have these capabilities. In addition, these development servers show their limitations as soon as you try to scale and handle more requests.
With respect to needing a reverse proxy server such as Nginx is concerned it depends on your use case.
If you are deploying your application behind the latest load balancer in AWS such as an application load balancer(NOT classic load balancer), that itself will suffice for most use cases. No need to take effort into setting up NGINX if you have that option.
The purpose of a reverse proxy is to handle slow clients, meaning clients which take time to send the request. These reverse load balancers buffer the requests till the entire request is got from the clients and send them async to Gunicorn. This improves the performance of your application considerably.
Setting up Flask with uWSGI and Nginx can be difficult. I tried following this DigitalOcean tutorial and still had trouble. Even with buildout scripts it takes time, and I need to write instructions to follow next time.
If I don't expect a lot of traffic, or the app is private, does it make sense to run it without uWSGI? Flask can listen to a port. Can Nginx just forward requests?
Does it make sense to not use Nginx either, just running bare Flask app on a port?
When you "run Flask" you are actually running Werkzeug's development WSGI server, and passing your Flask app as the WSGI callable.
The development server is not intended for use in production. It is not designed to be particularly efficient, stable, or secure. It does not support all the possible features of a HTTP server.
Replace the Werkzeug dev server with a production-ready WSGI server such as Gunicorn or uWSGI when moving to production, no matter where the app will be available.
The answer is similar for "should I use a web server". WSGI servers happen to have HTTP servers but they will not be as good as a dedicated production HTTP server (Nginx, Apache, etc.).
Flask documents how to deploy in various ways. Many hosting providers also have documentation about deploying Python or Flask.
First create the app:
import flask
app = flask.Flask(__name__)
Then set up the routes, and then when you want to start the app:
import gevent.pywsgi
app_server = gevent.pywsgi.WSGIServer((host, port), app)
app_server.serve_forever()
Call this script to run the application rather than having to tell gunicorn or uWSGI to run it.
I wanted the utility of Flask to build a web application, but had trouble composing it with other elements. I eventually found that gevent.pywsgi.WSGIServer was what I needed. After the call to app_server.serve_forever(), call app_server.stop() when to exit the application.
In my deployment, my application is listening on localhost:port using Flask and gevent, and then I have Nginx reverse-proxying HTTPS requests to it.
You definitely need something like a production WSGI server such as Gunicorn, because the development server of Flask is meant for ease of development without much configuration for fine-tuning and optimization.
Eg. Gunicorn has a variety of configurations depending on the use case you are trying to solve. But the development flask server does not have these capabilities. In addition, these development servers show their limitations as soon as you try to scale and handle more requests.
With respect to needing a reverse proxy server such as Nginx is concerned it depends on your use case.
If you are deploying your application behind the latest load balancer in AWS such as an application load balancer(NOT classic load balancer), that itself will suffice for most use cases. No need to take effort into setting up NGINX if you have that option.
The purpose of a reverse proxy is to handle slow clients, meaning clients which take time to send the request. These reverse load balancers buffer the requests till the entire request is got from the clients and send them async to Gunicorn. This improves the performance of your application considerably.