I get an error when trying to install this package on OSX through PyCharm. Couldn't find a solution, hopefully someone here has some advice.
Collecting PyAudio
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Using legacy 'setup.py install' for PyAudio, since package 'wheel' is not installed.
Installing collected packages: PyAudio
Running setup.py install for PyAudio: started
Running setup.py install for PyAudio: finished with status 'error'
ERROR: Command errored out with exit status 1:
command: /usr/local/bin/python3.9 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-install-mgmh8bxy/pyaudio_b6de439398d54d48abcfffdaaf01cc38/setup.py'"'"'; __file__='"'"'/private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-install-mgmh8bxy/pyaudio_b6de439398d54d48abcfffdaaf01cc38/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-record-j0kk4n9l/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.9/include/python3.9/PyAudio
cwd: /private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-install-mgmh8bxy/pyaudio_b6de439398d54d48abcfffdaaf01cc38/
Complete output (18 lines):
running install
running build
running build_py
creating build
creating build/lib.macosx-10.9-x86_64-3.9
copying src/pyaudio.py -> build/lib.macosx-10.9-x86_64-3.9
warning: build_py: byte-compiling is disabled, skipping.
running build_ext
building '_portaudio' extension
creating build/temp.macosx-10.9-x86_64-3.9
creating build/temp.macosx-10.9-x86_64-3.9/src
gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -DMACOSX=1 -I/Library/Frameworks/Python.framework/Versions/3.9/include/python3.9 -c src/_portaudiomodule.c -o build/temp.macosx-10.9-x86_64-3.9/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: 'portaudio.h' file not found
#include "portaudio.h"
^~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/gcc' failed with exit code 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/bin/python3.9 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-install-mgmh8bxy/pyaudio_b6de439398d54d48abcfffdaaf01cc38/setup.py'"'"'; __file__='"'"'/private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-install-mgmh8bxy/pyaudio_b6de439398d54d48abcfffdaaf01cc38/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/r8/_5x4wg2j36l8zrdh1ql_2vrh0000gn/T/pip-record-j0kk4n9l/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.9/include/python3.9/PyAudio Check the logs for full command output.
WARNING: You are using pip version 21.1.3; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/local/bin/python3.9 -m pip install --upgrade pip' command.
The same error occurs with Omnizart :(
The last PyAudio release was in 2017, it doesn't have wheels for Python 3.9 which means no easy installation process for you - one has to compile C code on the local machine. Unfortunately, the compiling process fails as you have missing dependencies namely portaudio. You need to install it, see the relevant question when installing pyaudio, pip cannot find portaudio.h in /usr/local/include.
Speaking of omnizart - not sure which error do you get, I pretty much doubt it is about portaudio. To start with - make sure to install all the dependencies as suggested in omnizart repo: https://github.com/Music-and-Culture-Technology-Lab/omnizart/issues/29#issuecomment-877557801.
Related
I'm trying to import tinyobjloader in my PyOpenGL project on PyCharm for an assignment, but I keep getting this error
ModuleNotFoundError: No module named 'tinyobjloader'
I've installed tinyobjloader with pip3 on my Mac.
When I try to install the package in the PyCharm preferences, I get this:
Collecting tinyobjloader
Using cached tinyobjloader-0.1.tar.gz (3.1 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Building wheels for collected packages: tinyobjloader
Building wheel for tinyobjloader (setup.py): started
Building wheel for tinyobjloader (setup.py): finished with status 'error'
Running setup.py clean for tinyobjloader
Failed to build tinyobjloader
Installing collected packages: tinyobjloader
Running setup.py install for tinyobjloader: started
Running setup.py install for tinyobjloader: finished with status 'error'
ERROR: Command errored out with exit status 1:
command: /Users/assignment2/venv/bin/python -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/setup.py'"'"'; __file__='"'"'/private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-wheel-41q_dg59
cwd: /private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/
Complete output (11 lines):
running bdist_wheel
running build
running build_ext
creating build
creating build/temp.macosx-10.9-x86_64-3.8
gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -I../ -I../pybind11/include -I/Users/assignment2/venv/include -I/Library/Frameworks/Python.framework/Versions/3.8/include/python3.8 -c bindings.cc -o build/temp.macosx-10.9-x86_64-3.8/bindings.o -std=c++11
bindings.cc:1:10: fatal error: 'pybind11/pybind11.h' file not found
#include "pybind11/pybind11.h"
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/gcc' failed with exit code 1
----------------------------------------
ERROR: Failed building wheel for tinyobjloader
ERROR: Command errored out with exit status 1:
command: /Users/assignment2/venv/bin/python -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/setup.py'"'"'; __file__='"'"'/private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-record-_ftffefa/install-record.txt --single-version-externally-managed --compile --install-headers /Users/assignment2/venv/include/site/python3.8/tinyobjloader
cwd: /private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/
Complete output (13 lines):
running install
/Users/assignment2/venv/lib/python3.8/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_ext
creating build
creating build/temp.macosx-10.9-x86_64-3.8
gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -I../ -I../pybind11/include -I/Users/assignment2/venv/include -I/Library/Frameworks/Python.framework/Versions/3.8/include/python3.8 -c bindings.cc -o build/temp.macosx-10.9-x86_64-3.8/bindings.o -std=c++11
bindings.cc:1:10: fatal error: 'pybind11/pybind11.h' file not found
#include "pybind11/pybind11.h"
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/gcc' failed with exit code 1
----------------------------------------
ERROR: Command errored out with exit status 1: /Users/assignment2/venv/bin/python -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/setup.py'"'"'; __file__='"'"'/private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-install-n2ikxhrd/tinyobjloader_e31de4c63a314c94a6b7729348292448/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/mc/1f9c4_mn1p93n0ynhkb96ctc0000gn/T/pip-record-_ftffefa/install-record.txt --single-version-externally-managed --compile --install-headers /Users/assignment2/venv/include/site/python3.8/tinyobjloader Check the logs for full command output.
% pip3 install pyaudio
Collecting pyaudio
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Using legacy 'setup.py install' for pyaudio, since package 'wheel' is not installed.
Installing collected packages: pyaudio
Running setup.py install for pyaudio ... error
ERROR: Command errored out with exit status 1:
command: /Library/Frameworks/Python.framework/Versions/3.9/bin/python3.9 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-install-yuqomyva/pyaudio_df9e48fd3dc447b18c59302d7aac4fe2/setup.py'"'"'; file='"'"'/private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-install-yuqomyva/pyaudio_df9e48fd3dc447b18c59302d7aac4fe2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-record-kg79q2az/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.9/include/python3.9/pyaudio
cwd: /private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-install-yuqomyva/pyaudio_df9e48fd3dc447b18c59302d7aac4fe2/
Complete output (16 lines):
running install
running build
running build_py
creating build
creating build/lib.macosx-10.9-x86_64-3.9
copying src/pyaudio.py -> build/lib.macosx-10.9-x86_64-3.9
running build_ext
building '_portaudio' extension
creating build/temp.macosx-10.9-x86_64-3.9
creating build/temp.macosx-10.9-x86_64-3.9/src
gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -DMACOSX=1 -I/Library/Frameworks/Python.framework/Versions/3.9/include/python3.9 -c src/_portaudiomodule.c -o build/temp.macosx-10.9-x86_64-3.9/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: 'portaudio.h' file not found
#include "portaudio.h"
^~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/gcc' failed with exit code 1
----------------------------------------
ERROR: Command errored out with exit status 1: /Library/Frameworks/Python.framework/Versions/3.9/bin/python3.9 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-install-yuqomyva/pyaudio_df9e48fd3dc447b18c59302d7aac4fe2/setup.py'"'"'; file='"'"'/private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-install-yuqomyva/pyaudio_df9e48fd3dc447b18c59302d7aac4fe2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /private/var/folders/41/jq1tn1b113b6nmbmpqqfxhrr0000gn/T/pip-record-kg79q2az/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.9/include/python3.9/pyaudio Check the logs for full command output.
Try:
pip install pipwin
And:
pipwin install pyaudio
Hope It Helps :D
I was trying to install PyAudio
The system is macOS Mojave, and version of Python is 3.8
I think pip doesn't have any problem, but some frameworks are collided with pyaudio
here are error message shown.
What should I do?
pip install pyaudio
Collecting pyaudio
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Using legacy 'setup.py install' for pyaudio, since package 'wheel' is not installed.
Installing collected packages: pyaudio
Running setup.py install for pyaudio ... error
ERROR: Command errored out with exit status 1:
command: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-install-b7gmavn1/pyaudio/setup.py'"'"'; __file__='"'"'/private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-install-b7gmavn1/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-record-zz9o5bbq/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.8/include/python3.8/pyaudio
cwd: /private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-install-b7gmavn1/pyaudio/
Complete output (16 lines):
running install
running build
running build_py
creating build
creating build/lib.macosx-10.9-x86_64-3.8
copying src/pyaudio.py -> build/lib.macosx-10.9-x86_64-3.8
running build_ext
building '_portaudio' extension
creating build/temp.macosx-10.9-x86_64-3.8
creating build/temp.macosx-10.9-x86_64-3.8/src
gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -DMACOSX=1 -I/Library/Frameworks/Python.framework/Versions/3.8/include/python3.8 -c src/_portaudiomodule.c -o build/temp.macosx-10.9-x86_64-3.8/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: 'portaudio.h' file not found
#include "portaudio.h"
^~~~~~~~~~~~~
1 error generated.
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-install-b7gmavn1/pyaudio/setup.py'"'"'; __file__='"'"'/private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-install-b7gmavn1/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/hq/cp10yz710x51x0qsxlrj5s5m0000gn/T/pip-record-zz9o5bbq/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.8/include/python3.8/pyaudio Check the logs for full command output.
Try installing pipwin first using:
pip install pipwin
and then install Pyaudio using pipwin:
pipwin install PyAudio
I typed: pip install pyaudio
and then it says:
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Using legacy setup.py install for pyaudio, since package 'wheel' is not installed.
Installing collected packages: pyaudio
Running setup.py install for pyaudio ... error
ERROR: Command errored out with exit status 1:
command: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-install-vpovlb7i/pyaudio/setup.py'"'"'; __file__='"'"'/private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-install-vpovlb7i/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-record-ek_hs7p1/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.8/include/python3.8/pyaudio
cwd: /private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-install-vpovlb7i/pyaudio/
Complete output (16 lines):
running install
running build
running build_py
creating build
creating build/lib.macosx-10.9-x86_64-3.8
copying src/pyaudio.py -> build/lib.macosx-10.9-x86_64-3.8
running build_ext
building '_portaudio' extension
creating build/temp.macosx-10.9-x86_64-3.8
creating build/temp.macosx-10.9-x86_64-3.8/src
gcc -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch x86_64 -g -DMACOSX=1 -I/Library/Frameworks/Python.framework/Versions/3.8/include/python3.8 -c src/_portaudiomodule.c -o build/temp.macosx-10.9-x86_64-3.8/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: 'portaudio.h' file not found
#include "portaudio.h"
^~~~~~~~~~~~~
1 error generated.
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-install-vpovlb7i/pyaudio/setup.py'"'"'; __file__='"'"'/private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-install-vpovlb7i/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/wj/x_g39c7n4pn_mrmpq2m35b0c0000gn/T/pip-record-ek_hs7p1/install-record.txt --single-version-externally-managed --compile --install-headers /Library/Frameworks/Python.framework/Versions/3.8/include/python3.8/pyaudio Check the logs for full command output.
WARNING: You are using pip version 20.1.1; however, version 20.2 is available.
You should consider upgrading via the '/Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -m pip install --upgrade pip' command.
This is being installed under python3, So I would recommend you to run this under a virtual environment https://help.dreamhost.com/hc/en-us/articles/215489338-Installing-and-using-virtualenv-with-Python-2 , then try trying this back again while venv being activated
I want to install pyHive package in ubuntu. Using this step:-
sudo apt-get install gcc
sudo apt-get install libsasl2-dev
pip install sasl
pip install thrift
pip install thrift-sasl
pip install PyHive
but when i install sasl package it's given me error
Using cached sasl-0.2.1.tar.gz (30 kB)
Requirement already satisfied: six in /home/shivam_gupta/Documents/pip3-venv/lib/python3.7/site-packages (from sasl) (1.14.0)
Installing collected packages: sasl
Running setup.py install for sasl ... error
ERROR: Command errored out with exit status 1:
command: /home/shivam_gupta/Documents/pip3-venv/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-vokx0cvb/sasl/setup.py'"'"'; __file__='"'"'/tmp/pip-install-vokx0cvb/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-hqi5nw58/install-record.txt --single-version-externally-managed --compile --install-headers /home/shivam_gupta/Documents/pip3-venv/include/site/python3.7/sasl
cwd: /tmp/pip-install-vokx0cvb/sasl/
Complete output (32 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
creating build/lib.linux-x86_64-3.7/sasl
copying sasl/__init__.py -> build/lib.linux-x86_64-3.7/sasl
running egg_info
writing sasl.egg-info/PKG-INFO
writing dependency_links to sasl.egg-info/dependency_links.txt
writing requirements to sasl.egg-info/requires.txt
writing top-level names to sasl.egg-info/top_level.txt
reading manifest file 'sasl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'sasl.egg-info/SOURCES.txt'
copying sasl/saslwrapper.cpp -> build/lib.linux-x86_64-3.7/sasl
copying sasl/saslwrapper.h -> build/lib.linux-x86_64-3.7/sasl
copying sasl/saslwrapper.pyx -> build/lib.linux-x86_64-3.7/sasl
running build_ext
building 'sasl.saslwrapper' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/sasl
gcc -pthread -B /home/shivam_gupta/anaconda3/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Isasl -I/home/shivam_gupta/Documents/pip3-venv/include -I/home/shivam_gupta/anaconda3/include/python3.7m -c sasl/saslwrapper.cpp -o build/temp.linux-x86_64-3.7/sasl/saslwrapper.o
cc1plus: warning: command line option ‘-Wstrict-prototypes’ is valid for C/ObjC but not for C++
In file included from sasl/saslwrapper.cpp:254:0:
sasl/saslwrapper.h: In member function ‘void saslwrapper::ClientImpl::interact(sasl_interact_t*)’:
sasl/saslwrapper.h:437:11: warning: unused variable ‘input’ [-Wunused-variable]
char* input;
^~~~~
g++ -pthread -shared -B /home/shivam_gupta/anaconda3/compiler_compat -L/home/shivam_gupta/anaconda3/lib -Wl,-rpath=/home/shivam_gupta/anaconda3/lib -Wl,--no-as-needed -Wl,--sysroot=/ build/temp.linux-x86_64-3.7/sasl/saslwrapper.o -lsasl2 -o build/lib.linux-x86_64-3.7/sasl/saslwrapper.cpython-37m-x86_64-linux-gnu.so
unable to execute 'g++': No such file or directory
error: command 'g++' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /home/shivam_gupta/Documents/pip3-venv/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-vokx0cvb/sasl/setup.py'"'"'; __file__='"'"'/tmp/pip-install-vokx0cvb/sasl/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-hqi5nw58/install-record.txt --single-version-externally-managed --compile --install-headers /home/shivam_gupta/Documents/pip3-venv/include/site/python3.7/sasl Check the logs for full command output.
My python version:- 3.7.6
What I do for installing hive in my ubuntu system?
And thrift-sasl also not installed.
unable to execute 'g++': No such file or directory
You don't have GNU C++ compiler. Install it:
sudo apt-get install g++