I'm trying to install some packages with pip.
But pip install unroll gives me
Command "python setup.py egg_info" failed with error code 1 in
C:\Users\MARKAN~1\AppData\Local\Temp\pip-build-wa7uco0k\unroll\
How can I solve this?
About the error code
According to the Python documentation:
This module makes available standard errno system symbols. The value of each symbol is the corresponding integer value. The names and descriptions are borrowed from linux/include/errno.h, which should be pretty all-inclusive.
Error code 1 is defined in errno.h and means Operation not permitted.
About your error
Your setuptools do not appear to be installed. Just follow the Installation Instructions from the PyPI website.
If it's already installed, try
pip install --upgrade setuptools
If it's already up to date, check that the module ez_setup is not missing. If it is, then
pip install ez_setup
Then try again
pip install unroll
If it's still not working, maybe pip didn't install/upgrade setup_tools properly so you might want to try
easy_install -U setuptools
And again
pip install unroll
Here's a little guide explaining a little bit how I usually install new packages on Python + Windows. It seems you're using Windows paths, so this answer will stick to that particular SO:
I never use a system-wide Python installation. I only use virtualenvs, and usually I try to have the latest version of 2.x & 3.x.
My first attempt is always doing pip install package_i_want in some of my Visual Studio command prompts. What Visual Studio command prompt? Well, ideally the Visual Studio which matches the one which was used to build Python. For instance, let's say your Python installation says Python 2.7.11 (v2.7.11:6d1b6a68f775, Dec 5 2015, 20:40:30) [MSC v.1500 64 bit (AMD64)] on win32. The version of Visual Studio used to compile Python can be found here, so v1500 means I'd be using vs2008 x64 command prompt
If the previous step failed for some reason I just try using easy_install package_i_want
If the previous step failed for some reason I go to gohlke website and I check whether my package is available over there. If it's so, I'm lucky, I just download it into my virtualenv and then I just go to that location using a command prompt and I do pip install package_i_want.whl
If the previous step didn't succeed I'll just try to build the wheel myself and once it's generated I'll try to install it with pip install package_i_want.whl
Now, if we focus in your specific problem, where you're having a hard time installing the unroll package. It seems the fastest way to install it is doing something like this:
git clone https://github.com/Zulko/unroll
cd unroll && python setup.py bdist_wheel
Copy the generated unroll-0.1.0-py2-none-any.whl file from the created dist folder into your virtualenv.
pip install unroll-0.1.0-py2-none-any.whl
That way it will install without any problems. To check it really works, just login into the Python installation and try import unroll, it shouldn't complain.
One last note: This method works almost 99% of the time, and sometimes you'll find some pip packages which are specific to Unix or Mac OS X, in that case, when that happens I'm afraid the best way to get a Windows version is either posting some issues to the main developers or having some fun by yourself porting to Windows (typically a few hours if you're not lucky) :)
It was resolved after upgrading pip:
python -m pip install --upgrade pip
pip install "package-name"
I got stuck exactly with the same error with psycopg2. It looks like I skipped a few steps while installing Python and related packages.
sudo apt-get install python-dev libpq-dev
Go to your virtual env
pip install psycopg2
(In your case you need to replace psycopg2 with the package you have an issue with.)
It worked seamlessly.
I got this same error while installing mitmproxy using pip3. The below command fixed this:
pip3 install --upgrade setuptools
Download and install the Microsoft Visual C++ Compiler for Python 2.7 from https://www.microsoft.com/en-in/download/details.aspx?id=44266 - this package contains the compiler and set of system headers necessary for producing binary wheels for Python 2.7 packages.
Open a command prompt in elevated mode (run as administrator)
Firstly do pip install ez_setup
Then do pip install unroll (It will start installing numpy, music21, decorator, imageio, tqdm, moviepy, unroll) # Please be patient for music21 installation
Python 2.7.11 64 bit used
Other way:
sudo apt-get install python-psycopg2 python-mysqldb
I had the same issue when installing the "Twisted" library and solved it by running the following command on Ubuntu 16.04 (Xenial Xerus):
sudo apt-get install python-setuptools python-dev build-essential
It's a dependency issue.
I tried running the following commands helped me sorting out the dependencies, in my case the dependency was
grpcio
pip3 install --upgrade pip
python3 -m pip install --upgrade setuptools
pip3 install --no-cache-dir --force-reinstall -Iv grpcio==1.36.1
pip3 install pulsar-client==2.7.0
remember you must have python3 installed in your system.
First try:
pip install unroll
For sure not work :)
Then Try:
pip2 install unroll
Still get error Try:
pip3 install unroll
If pip3 Worked then suggest to change configuration to use pip3 as pip because you will get a lot of issues as the modern now is Python3 = pip3 if you execute a script files.
I had the same problem.
The problem was:
pyparsing 2.2 was already installed and my requirements.txt was trying to install pyparsing 2.0.1 which throw this error
Context: I was using virtualenv, and it seems the 2.2 came from my global OS Python site-packages, but even with --no-site-packages flag (now by default in last virtualenv) the 2.2 was still present. Surely because I installed Python from their website and it added Python libraries to my $PATH.
Maybe a pip install --ignore-installed would have worked.
Solution: as I needed to move forwards, I just removed the pyparsing==2.0.1 from my requirements.txt.
I ran into the same error code when trying to install a Python module with pip.
#Hackndo noted that the documentation indicate a security issue.
Based on that answer, my problem was solved by running the pip install command with sudo prefixed:
sudo pip install python-mpd2
For me this worked
python3 -m pip3 install -U pip
you can also try
python -m pip install -U pip
pip3 install --upgrade setuptools
WARNING: pip is being invoked by an old script wrapper. This will fail in a future version of pip.
Please see https://github.com/pypa/pip/issues/5599 for advice on fixing the underlying issue.
To avoid this problem you can invoke Python with -m pip instead of running pip directly.
Use python3 -m pip "command", eg:
python3 -m pip install --user pyqt5
I tried all of the above with no success. I then updated my Python version from 2.7.10 to 2.7.13, and it resolved the problems that I was experiencing.
That means some packages in pip are old or not correctly installed.
Try checking version and then upgrading pip.Use auto remove if that works.
If the pip command shows an error all the time for any command or it freezes, etc.
The best solution is to uninstall it or remove it completely.
Install a fresh pip and then update and upgrade your system.
I have given a solution to installing pip fresh here - python: can't open file get-pip.py error 2] no such file or directory
next installation helps me:
pip3 install cython
This worked for me:
sudo xcodebuild -license
Upgrading Python to version 3 fixed my problem. Nothing else did.
I downloaded the .whl file from http://www.lfd.uci.edu/~gohlke/pythonlibs/ and then did:
pip install scipy-0.19.1-cp27-cp27m-win32.whl
Note that the version you need to use (win32/win_amd-64) depends on the version of Python and not that of Windows.
I had this problem using virtualenvs (with pipenv) on my new development setup.
I could only solve it by upgrading the psycopg2 version from 2.6.2 to 2.7.3.
More information is at https://github.com/psycopg/psycopg2/issues/594
I faced the same problem with the same error message but on Ubuntu 16.04 LTS (Xenial Xerus) instead:
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-w71uo1rg/poster/
I tested all the solutions provided above and none of them worked for me. I read the full TraceBack and found out I had to create the virtual environment with Python version 2.7 instead (the default one uses Python 3.5 instead):
virtualenv --python=/usr/bin/python2.7 my_venv
Once I activated it, I run pip install unirest successfully.
try on linux:
sudo apt install python-pip python-bluez libbluetooth-dev libboost-python-dev libboost-thread-dev libglib2.0-dev bluez bluez-hcidump
Had the same problem on my Win10 PC with different packages and tried everything mentioned so far.
Finally solved it by disabling Comodo Auto-Containment.
Since nobody has mentioned it yet, I hope it helps someone.
I had the same problem and was able to fix by doing the following.
Windows Python needs Visual C++ libraries installed via the SDK to build code, such as via setuptools.extension.Extension or numpy.distutils.core.Extension. For example, building f2py modules in Windows with Python requires Visual C++ SDK as installed above. On Linux and Mac, the C++ libraries are installed with the compiler.
https://www.scivision.co/python-windows-visual-c++-14-required/
Following below command worked for me
[root#sandbox ~]# pip install google-api-python-client==1.6.4
Methods to solve setup.pu egg_info issue when updating setuptools or not other methods doesnot works.
If CONDA version of the library is available to install use conda instead of pip.
Clone the library repo and then try installation by pip install -e . or by python setup.py install
upgrading python's version did the work for me.
I have just encountered the same problem when trying to pip install -e . a new repo. I did not notice that the contents of setup.py haven't been saved properly and I was effectively running the command with an empty setup.py.
Hence you may experience the same error message if the setup.py of the target package is either empty or malformed.
I solved it on Centos 7 by using:
sudo yum install libcurl-devel
I was following the instructions here and I'm having trouble getting the installation to work. Basically, the first part works fine. I downloaded portaudio, followed the instructions, and it all seemed to work.
However, when I triedpython3 setup.py install, I got an error. The error came from the /src/_portaudiomodule.c file, and it said that "The file Python.h could not be found". I don't really understand what's going on because there was no Python.h file when I extracted the PyAudio archive. I don't know where the Python.h file was supposed to come from.
I'm kind of a noob to unix systems so I could have easily made a mistake somewhere. I've been trying to solve this for hours and I've had no luck so far. Thanks in advance for your help!
To install the latest version of pyaudio using conda:
source activate -your environment name-
pip install pyaudio
You may run into the following error when installing from pip:
src/_portaudiomodule.c:29:23: fatal error: portaudio.h: No such file or directory
#include "portaudio.h"
compilation terminated.
error: command 'gcc' failed with exit status 1
That is because you don't have the PortAudio development package installed. Install it with:
sudo apt-get install portaudio19-dev
You don't need to compile pyaudio. To install PyAudio, run:
$ sudo add-apt-repository universe
$ sudo apt-get install python-pyaudio python3-pyaudio
The first command enables Universe Ubuntu repository.
If you want to compile it e.g., to use the latest version from git; install build dependencies:
$ sudo apt-get build-dep python-pyaudio python3-pyaudio
After that, you could install it from sources using pip:
$ python3 -mpip install pyaudio
Or to install the current version from git:
$ pip install -e git+http://people.csail.mit.edu/hubert/git/pyaudio.git#egg=pyaudio
Run pip commands inside a virtualenv or add --user command-line option, to avoid modifying the global python3 installation (leave it to the package manager).
I've tested it on Ubuntu. Let me know if it fails on Mint.
I have found the work arround for mac.
please refer the below steps to install pyaudio on python 3.5
Follow these steps :
export HOMEBREW_NO_ENV_FILTERING=1
xcode-select --install
brew update
brew upgrade
brew install portaudio
pip install pyaudio
I was able to get it install with anaconda, using this package.
Follow install instructions for linux here, then do:
conda install -c bokeh pyaudio=0.2.7
try to install using the the below command
pip install pyaudio
after that install the required Microsoft Visual C++ 14.0
refer the below image for the same.
and restart the system and run the same command again
pip install pyaudio
Python.h is nothing but a header file. It is used by gcc to build applications. You need to install a package called python-dev. This package includes header files, a static library and development tools for building Python modules, extending the Python interpreter or embedding Python in applications. To install this package, enter:
sudo apt-get install python3-dev
I am trying to make a Twitter app with my Pi but when I try the command
sudo pip install tweepy
I get greeted by the following error:
AttributeError: 'NoneType' object has no attribute 'skip_requirements_regex'
----------------------------------------
Command python setup.py egg_info failed with error code 1 in /home/pi/build/tweepy
Any suggestions? This also happens if I try to install directly from GitHub
Someone on the Raspberry Pi forums figured out the problem. Apparently there is a problem installing some applications with pip v1.1, which is the version in the Raspbian repository. Updating pip with the following command did the trick.
sudo pip install -U pip
Someone had a similar question. Here is the link on github.
https://github.com/tweepy/tweepy/issues/441
If that doesn't help you can go on the link of the main page
https://github.com/tweepy/tweepy
and then click download zip on the right.
have you tried installing it from the source?
git clone https://github.com/tweepy/tweepy.git
cd tweepy
python setup.py install
I have tried "sudo pip install -U pip"
but still got errors but looking at documentation found better option.
easy_install tweepy
and it worked as expected.
I'm relatively new to Python, extremely new to Django and Heroku, and also rather new to working in the terminal.
I'm attempting to follow the instructions on setting up a Django Heroku project found here. I'm getting stuck at the following command:
pip install django-toolbelt
I keep getting the following error:
Error: pg_config executable not found.
I don't know if any of this is even remotely related to the problem, but these are the things I've tried so far:
Tried reinstalling the django-toolbelt (just running the command again)
Tried switching from Postgres.app to the full Mac OSX install
No luck. What am I missing?
EDIT: Per Midimo's suggestion, I tried installing python-dev. This is what happened:
(venv)Macbook:[SITE] [USER]$ pip install python-dev
Downloading/unpacking python-dev
Could not find any downloads that satisfy the requirement python-dev
Cleaning up...
No distributions at all found for python-dev
Storing complete log in /Users/[USER]/.pip/pip.log
EDIT 2: And this is what happened when I tried to install libpq-dev...
(venv)Macbook:[SITE] [USER]$ pip install libpq-dev
Downloading/unpacking libpq-dev
Could not find any downloads that satisfy the requirement libpq-dev
Cleaning up...
No distributions at all found for libpq-dev
Storing complete log in /Users/[USER]/.pip/pip.log
do you have python-dev installed?
If you did, try installing libpq-dev
Before installing django-toolbelt you have to install those following dependencies:
$ sudo apt-get install python-dev python-psycopg2 libpq-dev
And then in the virtualenv:
(myven)trinh#trinh-pc:/path/to/django/project$ pip install django-toolbelt
Source :
I had same problem: one of the messages was couldn't run pg_config. Despite fact I had pg_config on my PATH and had restarted terminal to be sure.
My solution was to just run pg_config right before pip install django-toolbelt.
install than ran without any errors.
Just in case this will help anyone.
I'm working through this on Windows and was having this problem while trying to install django-toolbelt via pip in a virtualenv.
I had to add the entire directory to my PATH and make sure that Program Files was in quotes --
PATH=$PATH:/c/"program files"/postgresql/9.4/bin/
I was trying to get this work for hours so hopefully this helps someone else!
You need Postgres on you Mac because the django-toolbelt will try to install psycopg2 that won't find the path for the database and will raise the error.
The easiest solution is to install the Postgres.app and then add to the .profile file located on your home folder the following and restart or just run the command manually in the terminal:
export PATH=$PATH:/Applications/Postgres.app/Contents/Versions/9.4/bin
Now you are ready to install the toolbelt