a = "aajfkdfvf_valid_name0"
b = "gdhdhsdsdeeeeex_valid_name1"
How do I remove the gibberish from my string before valid so that I have something like this -
valid_name0
valid_name1
If your strings always contains valid word, then you can try something like -
a = "aajfkdfvf_valid_name0"
b = "gdhdhsdsdeeeeex_valid_name1"
for s in (a, b):
print(s[s.rfind('valid'):])
So, even if the prefix contains _ or substring valid in it, the output will be correct. Though if your valid substring contains the word valid multiple times, then this will not work
We can try using re.sub here:
a = "aajfkdfvf_valid_name0"
b = "gdhdhsdsdeeeeex_valid_name1"
inp = [a, b]
output = [re.sub(r'^[^_]+_', '', i) for i in inp]
print(output) # ['valid_name0', 'valid_name1']
You can use a split join approach for this.
Try this:
a = "aajfkdfvf_valid_name0"
valid_a = '_'.join(a.split('_')[1:])
# 'valid_name0'
# can use maxsplit to split only once at the first _ and then take the remaining part of the string
another_valid_a = a.split('_',1)[1]
# valid_name0
Basically what this is doing is that it is splitting the original string at the _, then ignoring the first element and joining the remaining part again using _.
The other approaches seem a bit too over-engineered for this task, at least in my opinion.
If you already know that the gibberish comes before the first underscore _ character, you can just do a single str.split and discard the first split result:
a = "aajfkdfvf_valid_name0"
b = "gdhdhsdsdeeeeex_valid_name1"
def clean_string(s: str) -> str:
return s.split('_', 1)[1]
print(clean_string(a)) # valid_name0
print(clean_string(b)) # valid_name1
If you're sure that just a '_' is your need, a string split will help:
fixed_a = '_'.join(a.split('_')[1:])
The worst case is that this pattern is not the only one you're looking at. Then, check this:
You need to know exactly what your 'valid_name' looks like, you could make a REGEX to achieve your need.
Check for standards, patterns and all those.
I'm pretty sure if is there a pattern, a Regex can handle.
I recommend this site to do so.
Related
Have a scenario where I wanted to split a string partially and pick up the 1st portion of the string.
Say String could be like aloha_maui_d0_b0 or new_york_d9_b10. Note: After d its numerical and it could be any size.
I wanted to partially strip any string before _d* i.e. wanted only _d0_b0 or _d9_b10.
Tried below code, but obviously it removes the split term as well.
print(("aloha_maui_d0_b0").split("_d"))
#Output is : ['aloha_maui', '0_b0']
#But Wanted : _d0_b0
Is there any other way to get the partial portion? Do I need to try out in regexp?
How about just
stArr = "aloha_maui_d0_b0".split("_d")
st2 = '_d' + stArr[1]
This should do the trick if the string always has a '_d' in it
You can use index() to split in 2 parts:
s = 'aloha_maui_d0_b0'
idx = s.index('_d')
l = [s[:idx], s[idx:]]
# l = ['aloha_maui', '_d0_b0']
Edit: You can also use this if you have multiple _d in your string:
s = 'aloha_maui_d0_b0_d1_b1_d2_b2'
idxs = [n for n in range(len(s)) if n == 0 or s.find('_d', n) == n]
parts = [s[i:j] for i,j in zip(idxs, idxs[1:]+[None])]
# parts = ['aloha_maui', '_d0_b0', '_d1_b1', '_d2_b2']
I have two suggestions.
partition()
Use the method partition() to get a tuple containing the delimiter as one of the elements and use the + operator to get the String you want:
teste1 = 'aloha_maui_d0_b0'
partitiontest = teste1.partition('_d')
print(partitiontest)
print(partitiontest[1] + partitiontest[2])
Output:
('aloha_maui', '_d', '0_b0')
_d0_b0
The partition() methods returns a tuple with the first element being what is before the delimiter, the second being the delimiter itself and the third being what is after the delimiter.
The method does that to the first case of the delimiter it finds on the String, so you can't use it to split in more than 3 without extra work on the code. For that my second suggestion would be better.
replace()
Use the method replace() to insert an extra character (or characters) right before your delimiter (_d) and use these as the delimiter on the split() method.
teste2 = 'new_york_d9_b10'
replacetest = teste2.replace('_d', '|_d')
print(replacetest)
splitlist = replacetest.split('|')
print(splitlist)
Output:
new_york|_d9_b10
['new_york', '_d9_b10']
Since it replaces all cases of _d on the String for |_d there is no problem on using it to split in more than 2.
Problem?
A situation to which you may need to be careful would be for unwanted splits because of _d being present in more places than anticipated.
Following the apparent logic of your examples with city names and numericals, you might have something like this:
teste3 = 'rio_de_janeiro_d3_b32'
replacetest = teste3.replace('_d', '|_d')
print(replacetest)
splitlist = replacetest.split('|')
print(splitlist)
Output:
rio|_de_janeiro|_d3_b32
['rio', '_de_janeiro', '_d3_b32']
Assuming you always have the numerical on the end of the String and _d won't happen inside the numerical, rpartition() could be a solution:
rpartitiontest = teste3.rpartition('_d')
print(rpartitiontest)
print(rpartitiontest[1] + rpartitiontest[2])
Output:
('rio_de_janeiro', '_d', '3_b32')
_d3_b32
Since rpartition() starts the search on the String's end and only takes the first match to separate the terms into a tuple, you won't have to worry about the first term (city's name?) causing unexpected splits.
Use regex's split and keep delimiters capability:
import re
patre = re.compile(r"(_d\d)")
#👆 👆
#note the surrounding parenthesises - they're what drives "keep"
for line in """aloha_maui_d0_b0 new_york_d9_b10""".split():
parts = patre.split(line)
print("\n", line)
print(parts)
p1, p2 = parts[0], "".join(parts[1:])
print(p1, p2)
output:
aloha_maui_d0_b0
['aloha_maui', '_d0', '_b0']
aloha_maui _d0_b0
new_york_d9_b10
['new_york', '_d9', '_b10']
new_york _d9_b10
credit due: https://stackoverflow.com/a/15668433
Basically, I have a list of special characters. I need to split a string by a character if it belongs to this list and exists in the string. Something on the lines of:
def find_char(string):
if string.find("some_char"):
#do xyz with some_char
elif string.find("another_char"):
#do xyz with another_char
else:
return False
and so on. The way I think of doing it is:
def find_char_split(string):
char_list = [",","*",";","/"]
for my_char in char_list:
if string.find(my_char) != -1:
my_strings = string.split(my_char)
break
else:
my_strings = False
return my_strings
Is there a more pythonic way of doing this? Or the above procedure would be fine? Please help, I'm not very proficient in python.
(EDIT): I want it to split on the first occurrence of the character, which is encountered first. That is to say, if the string contains multiple commas, and multiple stars, then I want it to split by the first occurrence of the comma. Please note, if the star comes first, then it will be broken by the star.
I would favor using the re module for this because the expression for splitting on multiple arbitrary characters is very simple:
r'[,*;/]'
The brackets create a character class that matches anything inside of them. The code is like this:
import re
results = re.split(r'[,*;/]', my_string, maxsplit=1)
The maxsplit argument makes it so that the split only occurs once.
If you are doing the same split many times, you can compile the regex and search on that same expression a little bit faster (but see Jon Clements' comment below):
c = re.compile(r'[,*;/]')
results = c.split(my_string)
If this speed up is important (it probably isn't) you can use the compiled version in a function instead of having it re compile every time. Then make a separate function that stores the actual compiled expression:
def split_chars(chars, maxsplit=0, flags=0, string=None):
# see note about the + symbol below
c = re.compile('[{}]+'.format(''.join(chars)), flags=flags)
def f(string, maxsplit=maxsplit):
return c.split(string, maxsplit=maxsplit)
return f if string is None else f(string)
Then:
special_split = split_chars(',*;/', maxsplit=1)
result = special_split(my_string)
But also:
result = split_chars(',*;/', my_string, maxsplit=1)
The purpose of the + character is to treat multiple delimiters as one if that is desired (thank you Jon Clements). If this is not desired, you can just use re.compile('[{}]'.format(''.join(chars))) above. Note that with maxsplit=1, this will not have any effect.
Finally: have a look at this talk for a quick introduction to regular expressions in Python, and this one for a much more information packed journey.
I am trying to do something which I thought would be simple (and probably is), however I am hitting a wall. I have a string that contains document numbers. In most cases the format is ######-#-### however in some cases, where the single digit should be, there are multiple single digits separated by a comma (i.e. ######-#,#,#-###). The number of single digits separated by a comma is variable. Below is an example:
For the string below:
('030421-1,2-001 & 030421-1-002,030421-1,2,3-002, 030421-1-003')
I need to return:
['030421-1-001', '030421-2-001' '030421-1-002', '030421-1-002', '030421-2-002', '030421-3-002' '030421-1-003']
I have only gotten as far as returning the strings that match the ######-#-### pattern:
import re
p = re.compile('\d{6}-\d{1}-\d{3}')
m = p.findall('030421-1,2-001 & 030421-1-002,030421-1,2,3-002, 030421-1-003')
print m
Thanks in advance for any help!
Matt
Perhaps something like this:
>>> import re
>>> s = '030421-1,2-001 & 030421-1-002,030421-1,2,3-002, 030421-1-003'
>>> it = re.finditer(r'(\b\d{6}-)(\d(?:,\d)*)(-\d{3})\b', s)
>>> for m in it:
a, b, c = m.groups()
for x in b.split(','):
print a + x + c
...
030421-1-001
030421-2-001
030421-1-002
030421-1-002
030421-2-002
030421-3-002
030421-1-003
Or using a list comprehension
>>> [a+x+c for a, b, c in (m.groups() for m in it) for x in b.split(',')]
['030421-1-001', '030421-2-001', '030421-1-002', '030421-1-002', '030421-2-002', '030421-3-002', '030421-1-003']
Use '\d{6}-\d(,\d)*-\d{3}'.
* means "as many as you want (0 included)".
It is applied to the previous element, here '(,\d)'.
I wouldn't use a single regular expression to try and parse this. Since it is essentially a list of strings, you might find it easier to replace the "&" with a comma globally in the string and then use split() to put the elements into a list.
Doing a loop of the list will allow you to write a single function to parse and fix the string and then you can push it onto a new list and the display your string.
replace(string, '&', ',')
initialList = string.split(',')
for item in initialList:
newItem = myfunction(item)
newList.append(newItem)
newstring = newlist(join(','))
(\d{6}-)((?:\d,?)+)(-\d{3})
We take 3 capturing groups. We match the first part and last part the easy way. The center part is optionally repeated and optionally contains a ','. Regex will however only match the last one, so ?: won't store it at all. What where left with is the following result:
>>> p = re.compile('(\d{6}-)((?:\d,?)+)(-\d{3})')
>>> m = p.findall('030421-1,2-001 & 030421-1-002,030421-1,2,3-002, 030421-1-003')
>>> m
[('030421-', '1,2', '-001'), ('030421-', '1', '-002'), ('030421-', '1,2,3', '-002'), ('030421-', '1', '-003')]
You'll have to manually process the 2nd term to split them up and join them, but a list comprehension should be able to do that.
How do I split a string at the second underscore in Python so that I get something like this
name = this_is_my_name_and_its_cool
split name so I get this ["this_is", "my_name_and_its_cool"]
the following statement will split name into a list of strings
a=name.split("_")
you can combine whatever strings you want using join, in this case using the first two words
b="_".join(a[:2])
c="_".join(a[2:])
maybe you can write a small function that takes as argument the number of words (n) after which you want to split
def func(name, n):
a=name.split("_")
b="_".join(a[:n])
c="_".join(a[n:])
return [b,c]
Assuming that you have a string with multiple instances of the same delimiter and you want to split at the nth delimiter, ignoring the others.
Here's a solution using just split and join, without complicated regular expressions. This might be a bit easier to adapt to other delimiters and particularly other values of n.
def split_at(s, c, n):
words = s.split(c)
return c.join(words[:n]), c.join(words[n:])
Example:
>>> split_at('this_is_my_name_and_its_cool', '_', 2)
('this_is', 'my_name_and_its_cool')
I think you're trying the split the string based on second underscore. If yes, then you used use findall function.
>>> import re
>>> s = "this_is_my_name_and_its_cool"
>>> re.findall(r'^[^_]*_[^_]*|[^_].*$', s)
['this_is', 'my_name_and_its_cool']
>>> [i for i in re.findall(r'^[^_]*_[^_]*|(?!_).*$', s) if i]
['this_is', 'my_name_and_its_cool']
print re.split(r"(^[^_]+_[^_]+)_","this_is_my_name_and_its_cool")
Try this.
Here's a quick & dirty way to do it:
s = 'this_is_my_name_and_its_cool'
i = s.find('_'); i = s.find('_', i+1)
print [s[:i], s[i+1:]]
output
['this_is', 'my_name_and_its_cool']
You could generalize this approach to split on the nth separator by putting the find() into a loop.
Is there a way to pass in a list instead of a char to str.strip() in python? I have been doing it this way:
unwanted = [c for c in '!##$%^&*(FGHJKmn']
s = 'FFFFoFob*&%ar**^'
for u in unwanted:
s = s.strip(u)
print s
Desired output, this output is correct but there should be some sort of a more elegant way than how i'm coding it above:
oFob*&%ar
Strip and friends take a string representing a set of characters, so you can skip the loop:
>>> s = 'FFFFoFob*&%ar**^'
>>> s.strip('!##$%^&*(FGHJKmn')
'oFob*&%ar'
(the downside of this is that things like fn.rstrip(".png") seems to work for many filenames, but doesn't really work)
Since, you are looking to not delete elements from the middle, you can just use.
>>> 'FFFFoFob*&%ar**^'.strip('!##$%^&*(FGHJKmn')
'oFob*&%ar'
Otherwise, Use str.translate().
>>> 'FFFFoFob*&%ar**^'.translate(None, '!##$%^&*(FGHJKmn')
'oobar'