I want to run async def orderbook() function in new thread but the code not working ,the code stop at loop = asyncio.new_event_loop() in orderbook_callback()
I don't understand why, the orderbook_callback() work fine ouside thread but doesn't work in new thread
import asyncio
import json
import threading
import websockets.client
import websockets.exceptions
ws_url = "wss://phemex.com/ws/"
sub_orderbook = {"id": 1234, "method": "orderbook.subscribe", "params": ["BTCUSD"]}
async def orderbook():
while True:
try:
async for websocket in websockets.client.connect(ws_url, close_timeout=0.001):
try:
await websocket.send(json.dumps(sub_orderbook))
while True:
msg = await websocket.recv()
print(msg)
obj = json.loads(msg)
if isinstance(obj, dict) and obj.get('event') == 'ping':
await websocket.send(json.dumps({'event': 'pong'}))
except websockets.exceptions.ConnectionClosed as cc:
logger.warning(f'Connection at {ws_url} closed: {cc}')
continue
except Exception:
logger.warning(f'Restarting after unexpected exception:', exc_info=True)
def orderbook_callback():
print("Hi")
loop = asyncio.new_event_loop()
print("bye")
asyncio.set_event_loop(loop)
loop.run_until_complete(orderbook())
loop.close()
# orderbook_callback()
_thread = threading.Thread(target=orderbook_callback, daemon=True)
_thread.start()
You can use python-worker link
import asyncio
import json
import threading
import websockets.client
import websockets.exceptions
from worker import async_worker
ws_url = "wss://phemex.com/ws/"
sub_orderbook = {"id": 1234, "method": "orderbook.subscribe", "params": ["BTCUSD"]}
#async_worker
async def orderbook():
while True:
try:
async for websocket in websockets.client.connect(ws_url, close_timeout=0.001):
try:
await websocket.send(json.dumps(sub_orderbook))
while True:
msg = await websocket.recv()
print(msg)
obj = json.loads(msg)
if isinstance(obj, dict) and obj.get('event') == 'ping':
await websocket.send(json.dumps({'event': 'pong'}))
except websockets.exceptions.ConnectionClosed as cc:
logger.warning(f'Connection at {ws_url} closed: {cc}')
continue
except Exception:
logger.warning(f'Restarting after unexpected exception:', exc_info=True)
asyncio.run(orderbook())
print("run in thread success")
the last line will be executed bcs your async function already executed as a worker
Related
I need to listen tasks on 2 queues, so I wrote the code below, but it has a problem. Currently it behaves like this: if the code started when 2 queues were full, it works great. But if queues were empty one of them was, the code reads messages, but does not proccess them (does not send ack, does not do the logic). But the messages became unacked, until I stop the code. I do not see any reason to be them unacked and unprocessed.
I can't understand what is wrong with the code? May be there is another way to aggregate 2 or more queues like this?
# task_processor.py
from aio_pika import IncomingMessage
class TaskProcessor:
MAX_TASKS_PER_INSTANCE = 1
def __init__(self):
self._tasks = []
def can_accept_new_task(self) -> bool:
return len(self._tasks) < self.MAX_TASKS_PER_INSTANCE
async def process(self, message: IncomingMessage):
self._tasks.append(message)
print(message.body)
await message.ack()
self._tasks.pop()
# main.py
import asyncio
from asyncio import QueueEmpty
from typing import Callable
import aio_pika
from aio_pika import RobustQueue
from dotenv import load_dotenv
load_dotenv()
from core.logger.logger import logger
from core.services.rabbitmq.task_processor.task_processor import TaskProcessor
async def get_single_task(queue: RobustQueue):
while True:
try:
msg = await queue.get(timeout=3600)
return msg
except QueueEmpty:
await asyncio.sleep(3)
except asyncio.exceptions.TimeoutError:
logger.warning('queue timeout error')
pass
except Exception as ex:
logger.error(f"{queue} errored", exc_info=ex)
async def task_aggregator(queue1: RobustQueue, queue2: RobustQueue, should_take_new_task_cb: Callable):
while True:
if should_take_new_task_cb():
queue2, queue1 = queue1, queue2
gen1 = get_single_task(queue1)
gen2 = get_single_task(queue2)
done, _ = await asyncio.wait([gen1, gen2], return_when=asyncio.FIRST_COMPLETED)
for item in done:
result = item.result()
yield result
else:
await asyncio.sleep(1)
async def tasks(queue1: RobustQueue, queue2: RobustQueue, should_take_new_task_cb: Callable):
async for task in task_aggregator(queue1, queue2, should_take_new_task_cb):
yield task
async def main():
connection = await aio_pika.connect_robust(
f"amqp://user:password#host:port/vhost?heartbeat={180}"
)
channel1 = connection.channel()
channel2 = connection.channel()
await channel1.initialize()
await channel2.initialize()
queue1 = await channel1.get_queue('queue1')
queue2 = await channel2.get_queue('queue2')
task_processor = TaskProcessor()
task_generator = tasks(queue1, queue2, task_processor.can_accept_new_task)
while True:
if task_processor.can_accept_new_task():
task = await anext(task_generator)
await task_processor.process(task)
else:
await asyncio.sleep(1)
if __name__ == '__main__':
asyncio.run(main())
We are trying to use asyncio to run a straightforward client/server. The server is an echo server with two possible commands sent by the client, "quit" and "timer". The timer command starts a timer that will print a message in the console every second (at the server and client), and the quit command closes the connection.
The actual problem is the following:
When we run the server and the client, and we start the timer, the result of the timer is not sent to the client. It blocks the server and the client.
I believe that the problem is on the client's side. However, I was not able to detect it.
Server
import asyncio
import time
HOST = "127.0.0.1"
PORT = 9999
class Timer(object):
'''Simple timer class that can be started and stopped.'''
def __init__(self, writer: asyncio.StreamWriter, name = None, interval = 1) -> None:
self.name = name
self.interval = interval
self.writer = writer
async def _tick(self) -> None:
while True:
await asyncio.sleep(self.interval)
delta = time.time() - self._init_time
self.writer.write(f"Timer {delta} ticked\n".encode())
self.writer.drain()
print("Delta time: ", delta)
async def start(self) -> None:
self._init_time = time.time()
self.task = asyncio.create_task(self._tick())
async def stop(self) -> None:
self.task.cancel()
print("Delta time: ", time.time() - self._init_time)
async def msg_handler(reader: asyncio.StreamReader, writer: asyncio.StreamWriter) -> None:
'''Handle the echo protocol.'''
# timer task that the client can start:
timer_task = False
try:
while True:
data = await reader.read(1024) # Read 256 bytes from the reader. Size of the message
msg = data.decode() # Decode the message
addr, port = writer.get_extra_info("peername") # Get the address of the client
print(f"Received {msg!r} from {addr}:{port!r}")
send_message = "Message received: " + msg
writer.write(send_message.encode()) # Echo the data back to the client
await writer.drain() # This will wait until everything is clear to move to the next thing.
if data == b"quit" and timer_task is True:
# cancel the timer_task (if any)
if timer_task:
timer_task.cancel()
await timer_task
writer.close() # Close the connection
await writer.wait_closed() # Wait for the connection to close
elif data == b"quit" and timer_task is False:
writer.close() # Close the connection
await writer.wait_closed() # Wait for the connection to close
elif data == b"start" and timer_task is False:
print("Starting timer")
t = Timer(writer)
timer_task = True
await t.start()
elif data == b"stop" and timer_task is True:
print("Stopping timer")
await t.stop()
timer_task = False
except ConnectionResetError:
print("Client disconnected")
async def run_server() -> None:
# Our awaitable callable.
# This callable is ran when the server recieves some data
server = await asyncio.start_server(msg_handler, HOST, PORT)
async with server:
await server.serve_forever()
if __name__ == "__main__":
loop = asyncio.new_event_loop() # new_event_loop() is for python 3.10. For older versions, use get_event_loop()
loop.run_until_complete(run_server())
Client
import asyncio
HOST = '127.0.0.1'
PORT = 9999
async def run_client() -> None:
# It's a coroutine. It will wait until the connection is established
reader, writer = await asyncio.open_connection(HOST, PORT)
while True:
message = input('Enter a message: ')
writer.write(message.encode())
await writer.drain()
data = await reader.read(1024)
if not data:
raise Exception('Socket not communicating with the client')
print(f"Received {data.decode()!r}")
if (message == 'quit'):
writer.write(b"quit")
writer.close()
await writer.wait_closed()
exit(2)
# break # Don't know if this is necessary
if __name__ == '__main__':
loop = asyncio.new_event_loop()
loop.run_until_complete(run_client())
The client blocks on the input() function. This question is similar to server stop receiving msg after 1 msg receive
Finally, I found a possible solution, by separating the thread.
import asyncio
import websockets
import warnings
warnings.filterwarnings("ignore")
async def send_msg(websocket):
while True:
imp = await asyncio.get_event_loop().run_in_executor(None, lambda: input("Enter something: "))
print("MESSAGE: ", imp)
await websocket.send(imp)
#return imp
async def recv_msg(websocket):
while True:
msg = await websocket.recv()
print(f":> {msg}")
async def echo_loop():
uri = f"ws://localhost:8765"
async with websockets.connect(uri, ssl=None) as websocket:
while True:
await asyncio.gather(recv_msg(websocket),send_msg(websocket))
if __name__ == "__main__":
asyncio.get_event_loop().run_until_complete(echo_loop())
asyncio.get_event_loop().run_forever()
It seems that there is no clear solution. In particular, there have been many changes in python since the early releases of asyncio, so many possible solutions are outdated.
I change the code to use WebSockets. However, the problem persists: input blocks the code, and none of the solutions above have solved my problem.
Below is the new version of the code (and the error remains):
Server
import asyncio
import websockets
import time
class Timer(object):
'''Simple timer class that can be started and stopped.'''
def __init__(self, websocket, name=None, interval=1) -> None:
self.websocket = websocket
self.name = name
self.interval = interval
async def _tick(self) -> None:
while True:
await asyncio.sleep(self.interval)
await self.websocket.send("tick")
print("Delta time: ", time.time() - self._init_time)
async def start(self) -> None:
self._init_time = time.time()
self.task = asyncio.create_task(self._tick())
async def stop(self) -> None:
self.task.cancel()
print("Delta time: ", time.time() - self._init_time)
async def handler(websocket):
print("[WS-SERVER] client connected")
while True:
try:
msg = await websocket.recv()
print(f"<: {msg}")
await websocket.send("Message received. {}".format(msg))
if(msg == "start"):
timer = Timer(websocket)
await timer.start()
except websockets.ConnectionClosed:
print("[WS-SERVER] client disconnected")
break
async def main():
async with websockets.serve(handler, "localhost", 8765):
print("[WS-SERVER] ready")
await asyncio.Future() # run forever
if __name__ == "__main__":
asyncio.run(main())
Client
import asyncio
import websockets
'''async function that recieves and prints messages from the server'''
async def recieve_message(websocket):
msg1 = await websocket.recv()
print(f"<: {msg1}")
async def send_message(websocket):
msg = input("Put your message here: ")
await websocket.send(msg)
print(":> Sent message: ", msg)
async def handler():
uri = "ws://localhost:8765"
async with websockets.connect(uri) as websocket:
while True:
'''run input() in a separate thread'''
recv_msg, send_msg = await asyncio.gather(
recieve_message(websocket),
send_message(websocket),
return_exceptions=True)
if(send_msg == "test"):
print("Supertest")
async def main():
await handler()
await asyncio.Future() # run forever
if __name__ == "__main__":
asyncio.run(handler())
print("[WS-CLIENT] bye")
I'm wrting a python program to listen to NFT mints event by using websocket, but after running some time, the websocket will lose its connection, hence, I need to stop loop and restart it, but after searching many answers there still no solution for it, here is my code:
async def main():
await asyncio.gather(erc1155_listener(),erc721_listener())
async def erc721_listener():
task_set = set()
async with connect(alchemy_ws_url) as ws:
await ws.send(erc721_log_filter)
while True:
try:
message = await asyncio.wait_for(ws.recv(), timeout=60)
event = json.loads(message)
topics = event['params']['result']['topics']
transaction_hash = event['params']['result']['transactionHash']
contract_address = event['params']['result']['address']
if len(topics) == 4 and re.match(re.compile(r'0x[0]{0,}$'),topics[1]):
task = asyncio.create_task(free_mint_filter(transaction_hash,contract_address))
task_set.add(task)
task.add_done_callback(task_set.discard)
except Exception:
pass
async def erc1155_listener():
task_set = set()
async with connect(alchemy_ws_url) as ws:
await ws.send(erc1155_log_filter)
while True:
try:
message = await asyncio.wait_for(ws.recv(), timeout=60)
event = json.loads(message)
topics = event['params']['result']['topics']
transaction_hash = event['params']['result']['transactionHash']
contract_address = event['params']['result']['address']
if re.match( re.compile(r'0x[0]{0,}$'),topics[2]):
task = asyncio.create_task(free_mint_filter(transaction_hash,contract_address))
task_set.add(task)
task.add_done_callback(task_set.discard)
except Exception as e:
pass
async def free_mint_filter(transaction_hash,contract_address):
loop = asyncio.get_running_loop()
try:
transaction = await loop.run_in_executor(None, web3.eth.getTransaction, transaction_hash)
value = transaction['value']
if value == 0:
print(transaction['hash'].hex(),contract_address)
else:
print(transaction['hash'].hex(),'is not a free mint')
except Exception as e:
print(e)
asyncio.run(main())
if you have another better solution than restarting asyncio loop please tell me.
I'm trying to use asyncio with both a sync (would be the rest of the python program) and an async bloc and have the sync bloc send data through asyncio.queues.
Without the queueing everythig works fine.
but when I'm sending data in the queue it seems to block.
I'm trying different ways with get_nowait, etc... but with no success so far.
import asyncio
import time
queue = asyncio.Queue()
async def processor() -> None:
print("Started proc")
while True:
print("waiting for quee")
msg = await queue.get()
print(f"Got command from queue: {msg}")
# do something
await asyncio.sleep(5)
def run_sync(url: str) -> int:
while 1:
print("Sending HTTP request")
input("enter to send message to queue\n")
queue.put_nowait(url)
#do other work
time.sleep(10)
async def run_sync_threaded( url: str) -> int:
return await asyncio.to_thread(run_sync, url)
async def main() -> None:
await asyncio.gather(
processor(),
run_sync_threaded("https://www.example.com"),
)
asyncio.run(main())
EDIT:
Got this working, but looks like a work around instead of a proper solution. I don't know feels not very stable
import asyncio
import time
queue = asyncio.Queue()
async def processor() -> None:
print("Started proc")
while True:
print("waiting for quee")
msg = await queue.get()
print(f"Got command from queue: {msg}")
# do something
await asyncio.sleep(5)
async def async_send(url):
print(f'Adding {url} to queue')
queue.put_nowait(url)
def send(url, loop):
asyncio.run_coroutine_threadsafe(async_send(url), loop)
def run_sync(url: str, loop) -> int:
while 1:
input("enter to send message to queue\n")
send(url, loop)
#do other work
time.sleep(3)
async def run_sync_threaded( url: str, loop) -> int:
return await asyncio.to_thread(run_sync, url, loop)
async def main() -> None:
loop = asyncio.get_event_loop()
t = asyncio.create_task( processor())
t2 = asyncio.create_task(run_sync_threaded("https://www.example.com", loop))
asyncio.gather(
await t,
await t2
)
# This does not work
# asyncio.gather(
# await processor(),
# await run_sync_threaded("https://www.example.com", loop)
# )
asyncio.run(main())
The following code works, but fails to exit upon CTRL+c
Can anyone explain why, and how to fix?
It's asyncio code, but I'm using trio-asyncio (forward planning) to allow me to also use trio code.
#!.venv/bin/python
import asyncio
import trio
import trio_asyncio
from binance import AsyncClient, BinanceSocketManager
as_trio = trio_asyncio.aio_as_trio
as_aio = trio_asyncio.trio_as_aio
from contextlib import asynccontextmanager
#asynccontextmanager
async def AClient():
client = await AsyncClient.create()
try:
yield client
except KeyboardInterrupt:
print('ctrl+c')
exit(0)
finally:
await client.close_connection()
async def kline_listener(client):
print(1)
bm = BinanceSocketManager(client)
async with bm.kline_socket(symbol='BNBBTC') as stream:
while True:
try:
res = await stream.recv()
print(res)
except KeyboardInterrupt:
break
#as_trio
async def aio_main():
async with AClient() as client:
exchange_info = await client.get_exchange_info()
tickers = await client.get_all_tickers()
print(client, exchange_info.keys(), tickers[:2])
kline = asyncio.create_task(kline_listener(client))
await kline
if __name__ == "__main__":
trio_asyncio.run(aio_main)
I've placed except KeyboardInterrupt at 2 places, though it appears to do nothing.