i change the index-url, but if i install pep-508-url-deps, it is Collecting https://github.com/pypa/sampleproject/archive/master.zip, what is happen?
(test-3-9) [root#localhost pip]# pip install pep-508-url-deps
Looking in indexes: http://mirrors.tools.douban.com/pypi/simple
Collecting pep-508-url-deps
Downloading http://mirrors.tools.douban.com/pypi/packages/bc/69/b088a665f2cf87cb1f260376dce6895bf4b00336736b2082ef5af5a8bd20/pep-508-url-deps-1.0.0.post0.tar.gz (1.1 kB)
Preparing metadata (setup.py) ... done
Collecting sampleproject# https://github.com/pypa/sampleproject/archive/master.zip
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)'))': /pypa/sampleproject/archive/master.zip
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)'))': /pypa/sampleproject/archive/master.zip
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)'))': /pypa/sampleproject/archive/master.zip
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)'))': /pypa/sampleproject/archive/master.zip
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)'))': /pypa/sampleproject/archive/master.zip
ERROR: Could not install packages due to an OSError: HTTPSConnectionPool(host='github.com', port=443): Max retries exceeded with url: /pypa/sampleproject/archive/master.zip (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)')))
when i install numpy, it is ok, It's confusing to me.
(test-3-9) [root#localhost pip]# pip install numpy
Looking in indexes: http://mirrors.tools.douban.com/pypi/simple
Collecting numpy
Downloading http://mirrors.tools.douban.com/pypi/packages/f8/ea/ff38168d6565a8549f819699cac4d89bbc38fc5b27fb94f8e92bcd713348/numpy-1.23.2-cp39-cp39-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (17.1 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 17.1/17.1 MB 19.8 MB/s eta 0:00:00
Installing collected packages: numpy
Successfully installed numpy-1.23.2
(test-3-9) [root#localhost pip]#
oh, my god, it is must be set codeload.github.com and github.com in the field trusted-host = codeload.thub.com github.com in the pip.conf.
i only set one of both before.
Related
Command : sudo pip3 install PyAutoGUI
Unable to install the pyautogui, facing the problem attached in screenshot,
Below error getting,
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1131)'))': /simple/pyautogui/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1131)'))': /simple/pyautogui/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1131)'))': /simple/pyautogui/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1131)'))': /simple/pyautogui/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1131)'))': /simple/pyautogui/
Could not fetch URL https://pypi.org/simple/pyautogui/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pyautogui/ (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1131)'))) - skipping
**ERROR: Could not find a version that satisfies the requirement PyAutoGUI (from versions: none)
ERROR: No matching distribution found for PyAutoGUI
**
Need to install Pyautogui in linux environment.
I'm trying to get this module installed however it seems there's some issue. Is anyone able to make sense of what is happening?
H:\>pip install pywin32
Defaulting to user installation because normal site-packages is not writeable
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091)'))': /simple/pywin32/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091)'))': /simple/pywin32/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091)'))': /simple/pywin32/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091)'))': /simple/pywin32/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091)'))': /simple/pywin32/
Could not fetch URL https://pypi.org/simple/pywin32/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pywin32/ (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091)'))) - skipping
ERROR: Could not find a version that satisfies the requirement pywin32 (from versions: none)
ERROR: No matching distribution found for pywin32
Specify Python Interpreter
Try running the below command by appending the Python command to it. This will ensure the correct Python interpreter is specified and the packages will be installed over there.
If you are using Python 3:
python3 -m pip install [package_name]
If you are using Python 2:
python -m pip install [package_name]
I have created a virtual enviroment and then installed kedro on it. Now, created a new kedro project and after that while installing dependencies. I am getting the following error:
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1091)'))': /simple/flake8/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1091)'))': /simple/flake8/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1091)'))': /simple/flake8/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1091)'))': /simple/flake8/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1091)'))': /simple/flake8/
Could not find a version that matches flake8<4.0,>=3.7.9 (from -r C:\Users\schaudha\wetting_dispersing_agent\src\requirements.in (line 2))
No versions found
Was https://pypi.org/simple reachable?
Does warning means all packages are installed ?
How to check whether packages are installed or not?
there is no log saying .... package installed ... thereby i suspect they are not installed.
Many thanks in advance for help.
This is pip install error rather than actual package error. You should have a look at how your setup reaches PyPI. I can see that a flake8 version complying with the requirement flake8<4.0,>=3.7.9.
https://pypi.org/project/flake8/3.8.4/
So i tried installing the django-allauth package in a virtualenv and i keep getting this error
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1076)'))': /packages/ae/90/419273d26361bcdf016d8595ada9ad8a0d2fe2871783bf575df1d9911dce/django-allauth-0.13.0.tar.gz
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1076)'))': /packages/ae/90/419273d26361bcdf016d8595ada9ad8a0d2fe2871783bf575df1d9911dce/django-allauth-0.13.0.tar.gz
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1076)'))': /packages/ae/90/419273d26361bcdf016d8595ada9ad8a0d2fe2871783bf575df1d9911dce/django-allauth-0.13.0.tar.gz
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1076)'))': /packages/ae/90/419273d26361bcdf016d8595ada9ad8a0d2fe2871783bf575df1d9911dce/django-allauth-0.13.0.tar.gz
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1076)'))': /packages/ae/90/419273d26361bcdf016d8595ada9ad8a0d2fe2871783bf575df1d9911dce/django-allauth-0.13.0.tar.gz
ERROR: Could not install packages due to an EnvironmentError: HTTPSConnectionPool(host='files.pythonhosted.org', port=443): Max retries exceeded with url: /packages/ae/90/419273d26361bcdf016d8595ada9ad8a0d2fe2871783bf575df1d9911dce/django-allauth-0.13.0.tar.gz (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1076)')))
Please how do i resolve this error?
Try this:
pip instal django-allauth --trusted-host = pypi.python.org pypi.org files.pythonhosted.org
I have just installed Anaconda on a new machine (Microsoft Windows 10 Enterprise, 64-bit). As I try to install JupyterLab with pip, I always get the following error:
Collecting ipykernel (from notebook>=4.3.1->jupyterlab)
Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),)': /simple/ipykernel/
Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),)': /simple/ipykernel/
Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),)': /simple/ipykernel/
Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),)': /simple/ipykernel/
Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),)': /simple/ipykernel/
Could not fetch URL https://pypi.python.org/simple/ipykernel/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.python.org', port=443): Max retries exceeded with url: /simple/ipykernel/ (Caused by SSLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),)) - skipping
Could not find a version that satisfies the requirement ipykernel (from notebook>=4.3.1->jupyterlab) (from versions: )
No matching distribution found for ipykernel (from notebook>=4.3.1->jupyterlab)
I see that ipykernel is involved, but what is the problem here?