Develop Reference

Python socket connection not working over Local Network

I'm trying to get two computers (my PC and my laptop) to communicate over the Local Network using the Socket module in python.
This is the Server side code running on my PC (connected via LAN):
import socket
HOST = '192.168.1.3' #local PC IP
print(HOST)
PORT = 8080 # Port to listen on (non-privileged ports are > 1023)
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.bind((HOST, PORT))
s.listen()
conn, addr = s.accept()
with conn:
print('Connected by', addr)
while True:
data = conn.recv(1024)
print(data)
if not data:
break
conn.sendall(data)
And this is the Client side code, running on my Laptop (connected over WiFi):
import socket
TCP_IP = '192.168.1.3'
TCP_PORT = 8080
BUFFER_SIZE = 1024
MESSAGE = b"Hello, World!"
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((TCP_IP, TCP_PORT))
s.send(MESSAGE)
data = s.recv(BUFFER_SIZE)
s.close()
print("received data:", data)
The thing is: when I execute both codes, the Server side stays idle waiting for a connection and the Client side, after a while stops and returns the following timeout error:
Traceback (most recent call last):
File "C:\Users\...\client.py", line 13, in <module>
s.connect((TCP_IP, TCP_PORT))
TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
I can't understand why it won't connect from another device in the same network while it works perfectly if I execute the Client code on the same machine as the Server, even if when I run netstat -an in the CMD I can see the computer listening on that port:
TCP 192.168.1.3:8080 0.0.0.0:0 LISTENING
I tough it had something to do with the port forwarding so I tried playing around with it but I'm having troubles with that too (the ports seem to remain closed).
I really don't know what to do next, if you have some advice or know something else I could try please reply.

It actually was a firewall problem, I just needed to disable the windows defender firewall for the local network and now everything is working fine

In Windows 10, I had to open the port I was using for the socket, and it worked for me.
Here is a link to the instructions.

You're listening and connecting to the same IP - you need to listen to the client's IP(or just any IP with the correct port number) on the server and connect to the server's IP on the client.
For example, if the client's IP is 1.2.3.4 and the server's is 1.2.3.5, then
# server side
s.bind(('1.2.3.4', 8080)) # CLIENT_IP = '1.2.3.4'; PORT = 8080
# can also be s.bind(('0.0.0.0', 8080)) if you want multiple clients to connect.
# client side
s.connect(('1.2.3.5', 8080)) # SERVER_IP = '1.2.3.5'; PORT = 8080

Socket server in python refuses to connect

I am trying to create a simple web server with python using the following code.
However, When I run this code, I face this error:
ConnectionRefusedError: [WinError 10061] No connection could be made
because the target machine actively refused it
It worths mentioning that I have already tried some solutions suggesting manipulation of proxy settings in internet options. I have run the code both in the unticked and the confirmed situation of the proxy server and yet cannot resolve the issue.
Could you please guide me through this ?
import sys
import socketserver
import socket
hostname = socket.gethostname()
print("This is the host name: " + hostname)
port_number = 60000
soc = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
soc.connect((hostname,port_number))

Standard EXAMPLE of socket connection
SERVER & CLIENT
run this in your IDLE
import time
import socket
import threading
HOST = 'localhost' # Standard loopback interface address (localhost)
PORT = 60000 # Port to listen on (non-privileged ports are > 1023)
def server(HOST,PORT):
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((HOST, PORT))
s.listen(1)
while True:
conn, addr = s.accept()
data = conn.recv(1024)
if data:
print(data)
data = None
time.sleep(1)
print('Listening...')
def client(HOST,PORT,message):
print("This is the server's hostname: " + HOST)
soc = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
soc.connect((HOST,PORT))
soc.send(message)
soc.close()
th=threading.Thread(target = server,args = (HOST,PORT))
th.daemon = True
th.start()
After running this, in your IDLE execute this command and see response
>>> client(HOST,PORT,'Hello server, client sending greetings')
This is the server's hostname: localhost
Hello server, client sending greetings
>>>
If you try to do server with port 60000 but send message on different port, you will receive the same error as in your OP. That shows, that on that port is no server listening to connections

Python3 TCP Server not seeing incoming messages from external device

I want to create a small TCP server that takes incoming TCP connections from a device that is hooked up via Ethernet to my computer.
The physical port for that has the IP 192.168.1.100 statically assigned to it.
The scripts I use as a client and server are listed at the bottom.
The setup works if I want to send messages between the python scripts. However, I am unable to receive anything from the external device (screenshot from Wireshark capture below). From what I have read I can define an interface to listen to by defining its IP. So I defined the IP of the interface as the host variable. However, I do not receive anything in my script but the messages sent by the other script. I had a similar situation already here on stackoverflow. I thought that defining the correct IP as the host would resolve this issue but it did not.
I am also having a hard time capturing the traffic between the two scripts with Wireshark at all. They did not show up anywhere.
I need to pick up these connections on the eth0 interface with the static IP 192.168.1.100:
tcp_server.py
import socket
# create a socket object
serverSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
# get local machine name
# host = socket.gethostname()
host = "192.168.1.100"
port = 9002
# bind to the port
serverSocket.bind((host, port))
# queue up to 5 requests
serverSocket.listen(5)
while True:
# establish a connection
clientSocket, addr = serverSocket.accept()
print("Got a connection from %s" % str(addr))
msg = 'Thank you for connecting' + "\r\n"
clientSocket.send(msg.encode('ascii'))
clientSocket.close()
and this as a client:
tcp_client.py
import socket
# create a socket object
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
# get local machine name
# host = socket.gethostname()
host = "192.168.1.100"
port = 9002
# connection to hostname on the port.
s.connect((host, port))
# Receive no more than 1024 bytes
msg = s.recv(1024)
s.close()
print(msg.decode('ascii'))

Connecting to a simple sockets python server remotely

I am trying to setup a very simply sockets app. My server code is:
import socket
s = socket.socket()
host = socket.gethostname()
port = 1234
s.bind((host,port))
s.listen(5) #Here we wait for a client connection
while True:
c, addr = s.accept()
print "Got a connection from: ", addr
c.send("Thanks for connecting")
c.close()
I placed this file on my remote Linode server and run it using python server.py. I have checked that the port is open using nap:
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
1234/tcp open hotline
I now run the client.py on my local machine:
import socket # Import socket module
s = socket.socket() # Create a socket object
port = 1234 # Reserve a port for your service.
s.connect(("139.xxx.xx.xx", port))
print s.recv(1024)
s.close # Close the socket when done
However I am not getting any kind of activity or report of connection. Could someone give me some pointers to what I might have to do? Do I need to include the hostname in the IP address I specify in the client.py? Any help would be really appreciated!

I've just summarize our comments, so your problem is this:
When you trying to using the client program connect to the server via the Internet, not LAN.
You should configure the
port mapping on your router.
And however, you just need configure the
port mapping for your server machine.
After you did that, then you can use the client program connect to your server prigram.

Python- run socket script on the remote linux host

I have uploaded the server script to the public directory on the server machine. Then I try to connect to the server by a client, but I am not being connected. Here is my code snippets:
# Echo client program
import socket
HOST = 'www.dotpy.ir/server.py' # The remote host
PORT = 50007 # The same port as used by the server
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((HOST, PORT))
s.send('Hello, world')
data = s.recv(1024)
s.close()
print 'Received', repr(data)
server:
# Echo server program
import socket
HOST = '' # Symbolic name meaning all available interfaces
PORT = 50007 # Arbitrary non-privileged port
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((HOST, PORT))
s.listen(1)
conn, addr = s.accept()
print 'Connected by', addr
while 1:
data = conn.recv(1024)
if not data: break
conn.send(data)
conn.close()

These scripts seem to work well.
However, the script at the server must be run on the server for this to work. It's not enough for it to be uploaded to the public file area. What access do you have to the servers? Can you have scripts running on them?
If you succeed in running the script, then you will have to change the client script from:
HOST = 'www.dotpy.ir/server.py' # The remote host
to
HOST = 'www.dotpy.ir' # The remote host
The reason is that you will connect to the host itself. There the script will be running, listening to any inbound connections on the port specified. You can't conect to a specific script.
Good luck!